Análise isotópica, físico-química, centesimal e energética de água de coco

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Produção de uva passa de BRS Morena: pré-tratamento, caracterização físico-química e composição fenólica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização da produção e qualidade físico-química de méis produzidos no Estado de Pernambuco

The present study had as objective contribute to the characterization of beekeeping in the Pernambuco State and evaluate the physical-chemical quality of the honeys produced in the region. For this, was applied a directed formulary to the representative organ of beekeeping class aboutthe productives and technicals aspects of beekeepers. Was obtained 14 samples of honey by Apis mellifera africanized, stored in sterile plastic vessels was sent to the Beekeeping Products Quality Control Laboratory (CEA-UNITAU). Was observed that the most of beekeepers have of 50 to 100 hives (57,14%), 28,57% of 100 to 200 hives and 14,28% more than 500 hives, being that 85,71% produce 30 to 50 kg honey/hives/flowering. All use the standard hive Langstroth and 85,71% obtain their swarm by capture. About the physical-chemical quality of the honey, was observed that moisture content varied from 18,2% to 22,0%, with mean value of 19,80±1,11; the water activity varied from 0,70 to 0,84 aw, with mean value of 0,79±0,05 aw; the total acidity was 24,91±8,99 meq/kg and the average index of hydroxymethylfurfural was 16,32±17,88 meq/kg. The results obtained are according to the quality limits established by the brazilian legislation, excepted the water activity that exceeded the maximum limit of 0,65 aw. The datasobtained in this paper shows the development of beekeeping in Pernambuco State and the honey presents nice quality.

Pré-hidrólise ácida de bagaço de cana-de-açúcar e sua caracterização físico-química

The biomass resulting from processing sugarcane bagasse has been considered a source of cellulose with the potential production of bio-fuels. This lignocellulose can be processed into ethanol since is hydrolyzed by chemical processes (acids) or biotechnology (enzymes) which generate sugars suit for fermentation. This study had the objective to utilize physical and chemical pre-treatment processes for prehydrolysis of sugarcane bagasse. The experimental treatment was adjusted at a factor of 4 X 2, by the combination of pre-hydrolysis timing (15, 30, 45 and 60 minutes) and sulfuric acid concentrations (7.0% and 9.0%) which was incubated at a temperature of 121° C in an autoclave. The treatment data was subjected to analysis of the variance and averages which were compared using the Tukey test with a probability of 5%. The results obtained showed that through pretreatment acid applied on the lignocellulose material, there was a significant break from the substrate fibers like cellulose, hemicellulose and lignin.

Composição físico-química e propriedades tecnológicas da farinha de folhas de mandioca

Cassava leaves can be considered an important nutritional source when compared to other commonly consumed vegetables leaves. Cassava leaves have high levels of protein, fiber and minerals, and arestill underexplored due to the lack of information regarding the use of them as afood product, as well as, their use as an industrial raw material. The consumption of cassava leaves in fresh form is impractical due to the presence of cyanide, thereby it is required a pretreatment to be performed to reduce this component. The objective of this study was to produce and characterize the four made with cassava leaves as its chemical composition, color, indices of absorption and water solubility, and pasting properties, aiming to provide information of interest for possible application as an ingredient in the food industry. Cassava leaf flour showed low moisture content (6.6 %)and significant amounts of fiber (30.68 %), protein (23.00 %), and total carbohydrate (22.27%). Drying and milling processes allowed to obtain a flour with a low content of total cyanide (0.3 mg 100g-1 ), and the presence of vitamin C (56.6 mg 100g-1 ) and β –carotene (38 mg 100g- 1 ). The color analysis of cassava leaf flour showed low lightness with, predominantly, green and yellow pigments. The cassava leaf flour presented good solubility (14.85 %) and water absorption (6.87 g gel. g-1 ). Pasting properties showed a low peak of viscosity and a higher final viscosity with a retrogradation tendency, indicating a low capacity of this flour to form gel. The flour of cassava leaves can be a good source of nutrition when used as a food ingredient in soups and pasta. However, it is not indicated to products that require high gel formation.

Composição físico-química e cor de clones de mandioquinha-salsa

This study aimed to characterize the physical and chemical composition of ten items of arracacha grown in the municipality of São Manuel for the 2009 harvest. In the roots of the clones BGH (4560, 5741, 5744, 5746, 5747, 6414, 6513, 6525 and 7609) and the cultivar Amarela de Senador Amaral the characteristics evaluated were: color (L *, a * and b *) and moisture, ash, crude fiber, raw grease, protein, reducing sugars, total sugars and starch. After obtaining the data, an analysis was performed for the variance of test F and comparisons between the means made by the Tukey test at 5% probability. There was no significant difference to the results of luminosity (L *) while BGH 6414 and BGH 5744 showed the highest values for chroma and * BGH 5741, BGH 6414, BGH 7609, 'Amarela de Senador Amaral' BGH 5747 presented the highest chroma values for b *. Clones BGH 7609 and BGH 6414 showed significantly higher levels of dry matter and with the potential yield of agro-industrial processes it would be best suited in the form of frying. The materials that showed significantly larger amounts of ash were BGH 6525, BGH 5747, 'Amarela de Senador Amaral ", BGH 4560, BGH 5746, BGH 6513. Regarding the contents of fatty matter BGH 6525, BGH 5741 and BGH 5744 showed the highest levels. The results of BGH 7609 showed crude fiber significantly higher than the other materials tested, it can be used in diets composed of fibers. BGH 4560 and cultivar had the highest crude protein. BGH 5741 showed the lowest reducing sugar content among the clones, but not significantly different from results found for the cultivar. All clones showed total sugar levels were higher in the cultivar, which may have more flavor. BGH 5741, BGH 5746, BGH 6525 and BGH 6513 showed significantly higher starch content than the cultivar Amarela de Senador Amaral. From these results we conclude that the clones have similar color characteristics, and are potentially a nutritionally adequate substitute for the cultivar.

Suco integral de amora (Morus nigra L.) obtido através de prensagem e despolpamento: rendimento e caracterização físico-química

Mulberry (Morus nigra L.) is a fruit with a great potential for technological uses, which could be employed to manufacture of syrups, ice cream, candies, yoghurts, beverages, jam, etc. Only the leaf from mulberry trees is commercially used for silkworm feeding. This tree is cultivated on many agricultural environments such as small rural proprieties and settlements. Small farmers waste a great amount of their production for not knowing about mulberry technology. Thus, the objective of this work was to access extraction yield and physical-chemical properties of mulberry whole juice from ripe, green and a mixture of both by using press and depulper. Statistical analysis of results was carried by media and standard deviation calculations. 173 kg of mulberry were picked being 49.31% ripe and 50.68% green. Press delivered greater extraction yield of whole juice (80.50% to 81.60%) when compared to press (71.43% to 77.50%). Whole juice obtained from both equipments has shown the following values: soluble solids 7.45% - 12.11%, titrable acidity 0.45 – 1.23%, ratio 6.03 – 26.84, pH 3.69 – 4.35, total reducing sugar 4.05% – 9.96%, reducing sugar 3.95% - 9.15%, sucrose 0.00% - 0.04%, turbidity 221.25 NTU - >4,000 NTU. Whole juices obtained from both equipments has shown similar physical-chemical characteristics except turbidity. The authors concluded that press was the best extraction equipment due to its greater yield and whole juice quality regarding turbidity

Estabilidade físico-química de um produto de abacate acondicionado em diferentes embalagens e conservado pelo frio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Musgos como bioindicadores de contaminación metálica: caracterización físico-química en términos de adsorción

[EN] Bioindicators have been used in urban and industrial areas to control the atmospheric pollution because it constitutes one of the most important environmental problems of human health. In this sense, mosses are able to reflect the chemical composition of surrounding atmosphere that together with the easy production techniques becomes mosses as one of the potential bioindicators in Europe. This study is part of the Mossclone project (FP-7) and quantifies the adsorption of heavy metals on 4 typical moss species in order to propose one of them to be used for environmental monitoring in the moss bag technique.

Memoria físico-química aplicada a la medicina sobre la infección en general y el contagio en particular y sobre los varios desinfectantes que deba haber : leida en la real Academia de Medicina y Cirugía de Barcelona /

Mode of access: Internet.

Caracterização físico-química de sistemas micelares

The process of adsorption and micellization of the surfactants sodium dodecyl sulfate, dodecylammonium chloride and hexaethylene glycol mono-n-dodecyl ether in water-air interface has been studied using measurements of surface tension in aqueous media and NaCl 0.1 mol/L in temperatures of 25, 33 and 40 °C. From these data, critical micelle concentrations and thermodynamic parameters of micellization and adsorption were determined in order to elucidate the behaviors of micellization and adsorption for these surfactants in the proposed medium. For the determination of the thermodynamic parameters of adsorption we utilized the equations of isotherms of Langmuir and Gibbs. Γmáx values determined by the different equations were correlated to the explanation of results. Temperature and salinity were analyzed in terms of their influence on the micellization and adsorption process, and the results were explained based on intermolecular interactions. The values of Gmic have confirmed that the micelle formation for the surfactants studied occurs spontaneously

Aproveitamento de subprodutos da indústria de carne suína: caracterização físico-química do queijo de porco

Headcheese is a meat sausage originated from Europe made from hog slaughter by-products. It is a much appreciated product in the South of Brazil which is increasingly established in the market, however it does not have official regulations yet. This study aimed to present the physicochemical characterization of headcheese in a western Santa Catarina industry supervised by Companhia Integrada de Desenvolvimento Agrícola de Santa Catarina and assess 10 different brands to find the relationship between chemical composition and texture profile analysis (TPA). Thus, the chemical composition, energy value, total nitrite, lipid oxidation and physical parameters (color and texture) were evaluated. The product exhibited great variability in moisture content, lipid and protein because the different formulations, processing and intrinsic and extrinsic characteristics of raw material. The utilization of offal provided higher cholesterol and iron levels, and the high content of collagen was accountable for the shear force responses (7.84 ± 1.68 N). The product showed higher amount of sodium, due to the use of additives, but calcium levels were compatible with other sausages. There was a predominance of polyunsaturated fatty acids and polyunsaturated fatty acids/saturated fatty acids ratio was more favorable than other sausage in the same category. Nitrite assured preservation effects and thus lower product levels of oxidation were observed. The high Water Activity and pH 6.5 showed that the product is susceptible to growth of pathogens and requires cooling for preservation. Its brownish occurred due to cooking and production of metmyoglobin. There was a strong positive correlation between collagen and attributes of TPA, especially for chewiness (r = 0.855). The use of Hierarchical Cluster Analysis and Principal Component Analysis were able to separate three groups based on the amount of collagen and texture attributes, especially hardness, gumminess and chewiness.

Caraterização físico-química e polínica de méis da Beira Alta

A apicultura é uma atividade em crescimento em Portugal, e por isso é cada vez mais importante caracterizar os produtos que dela derivam, e em particular o mel que é, em geral, o mais conhecido pelos consumidores. A designação DOP (Denominação de Origem Protegida) pode representar uma valorização em termos comerciais, podendo ser uma forma de diferenciação do mel português em contexto nacional e internacional. Deste modo é importante o conhecimento das suas características físico-químicas e polínicas, como fonte de demonstração dessa mesma diferenciação. O presente trabalho faz parte de um projeto de caraterização físico-química e polínica de méis, como contributo para a certificação do mel da Beira Alta como produto DOP. Recolheram-se amostras de méis produzidos pelos associados da Associação dos Apicultores da Beira Alta (AABA), no ano de 2014, afetos a 10 concelhos da área de intervenção da AABA. Os respetivos apiários localizam-se nos concelhos de Viseu, Tondela, Carregal do Sal, Nelas, Penalva do Castelo, Satão, Aguiar da Beira, Mangualde, Sernancelhe e Fornos de Algodres. Foram estudadas 27 amostras de méis representativas da região da Beira Alta de acordo com o número de unidades epidemiológicas dentro de cada concelho. Os resultados para cada parâmetro analisado foram obtidos em triplicado. O pH variou entre 3,4 e 4,3; o teor de água entre 17,5 e 19,7%; o teor de sólidos solúveis totais entre 80,3 e 82,5%; a condutividade elétrica entre 0,29 e 0,82 mS/cm; cinzas totais entre 0,2 e 0,6%; e ácidos livres entre 15 e 57 meq/kg. Para a determinação da cor, recorreu-se à análise colorimétrica, tendo-se efetuado 20 determinações por amostra, obtendo-se um intervalo de variação para L entre 23,08 e 75,51, a entre -0,30 e 16,76 e b entre -1,31 e 58,36. Para a caraterização polínica dos méis construiu-se uma palinoteca de referência da flora da região, sendo as preparações de pólen elaboradas de acordo com o método acetolítico. A análise polínica quantitativa revelou que 4 amostras de méis enquadraram-se na Classe I (<20 000 grãos de pólen por 10g de mel) e as restantes 23 na Classe III (100 000 a 500 000 grãos de pólen por 10g de mel). Na análise polínica qualitativa verificou-se que 11 dos méis analisados eram multiflorais (41%), 15 monoflorais de tília (56%) e 1 monofloral de urze (4%). O pólen de Eucalyptus sp. e de Castanea sativa esteve presente em 100% das amostras.Com estes primeiros resultados pretende-se contribuir para uma caracterização mais vasta da apicultura da Beira Alta e dos méis produzidos nesta região.

Caracterização físico-química e ações farmacológicas hepatoprotetora, antiinflamatória, pró-angiogênica, antioxidante e anticoagulante da fração rica em fucana 0,8FRF 0,8 da alga marrom Lobophora variegata

This study examines the physical and chemical composition and the pharmacological effects of brown seaweed FRF 0.8 Lobophora variegata. Fractionation of the crude extract was done with the concentration of 0.8 volumes of acetone, obtaining the FRF 0.8. The physicochemical characterization showed that it was a fucana sulfated. Anti-inflammatory activity was assessed by paw edema model by the high rates of inhibition of the edema and the best results were in the fourth hour after induction (100 ± 1.4% at the dose of 75 mg / kg) and by the strong inhibitory activity of the enzyme myeloperoxidase (91.45% at the dose of 25 mg / kg). The hepataproteção was demonstrated by measurements of enzymatic and metabolic parameters indicative of liver damage, such as bilirubin (reduction in 68.81%, 70.68% and 68.21% for bilirubin total, direct and indirect, respectively at a dose of 75 mg / kg), ALT, AST and γ-GT (decrease of 76.93%, 44.58% and 50% respectively at a dose of 75 mg / kg) by analysis of histological slides of liver tissue, confirming that hepatoprotective effect the polymers of carbohydrates, showing a reduction in tissue damage caused by CCl4 and the inhibition of the enzyme complex of cytochrome P 450 (increasing sleep time in 54.6% and reducing the latency time in 71.43%). The effectiveness of the FRF 0.8 angiogenesis was examined in chorioallantoic membrane (CAM) of fertilized eggs, with the density of capillaries evaluated and scored, showing an effect proangigênico at all concentrations tested FRF (10 mg- 1000 mg). The FRF showed antioxidant activity on free radicals (by inhibiting Superoxide Radical in 55.62 ± 2.10%, Lipid Peroxidation in 100.15 ± 0.01%, Hydroxyl Radical in 41.84 ± 0.001% and 71.47 Peroxide in ± 2.69% at concentration of 0.62 mg / mL). The anticoagulant activity was observed with prolongation of activated partial thromboplastin time (aPTT) at 50 mg (> 240 s), showing that its action occurs in the intrinsic pathway of the coagulation cascade. Thus, our results indicate that these sulfated polysaccharides are an important pharmacological target