Compósito para fabricação de blocos para construção de casas: estudos térmico e de materiais

We present two models of blocks made of composite material obtained from the use of cement, plaster, EPS crushed, shredded tire, mud, sand and water, for the construction of popular housing. Were made metal molds for the manufacture of blocks to be used in the construction of a residence for low-income families. Performed tests of compressive strength of the composite for various formulations that met the specific standard for blocks used in construction. To study the thermal conductivity of the composite for further study of thermal comfort generated in a residence built with the proposed composite. We also determined the mass-specific and water absorption for each formulation studied. Using a home already built with another composite material, made up the closing of a window with the building blocks and found the thermal insulation, measuring external and internal temperatures of the blocks. The blocks had made good thermal insulation of the environment, resulting in differences of up to 12.6°C between the outer and inner faces. It will be shown the feasibility of using composite for the end proposed and chosen the most appropriate wording

Análise térmica e mecânica de um compósito de matriz cerâmica com carga de EPS e raspa de pneu para construção de casas populares

Space Science was built using a composite made of plaster, EPS, shredded tires, cement and water. Studies were conducted to thermal and mechanical resistance. Inside the mold EPS plates were placed in order to obtain a higher thermal resistance on the wall constructed, as well as to give it an end environmentally friendly in view of both the tire and the EPS occupy a large space in landfills and year need to be degraded when released into the environment. Compression tests were performed according to ABNT blocks to seal, measurements of the temperature variation in the external and internal walls using a laser thermometer and check the temperature of the indoor environment using a thermocouple attached to a digital thermometer. The experiments demonstrated the heat provided by the composite values from the temperature difference between the internal and external surfaces on the walls, reaching levels of 12.4 ° C and room temperature in the interior space of the Science of 33.3 ° C, remaining within the zone thermal comfort for hot climate countries. It was also demonstrated the proper mechanical strength of such a composite for sealing walls. The proposed use of the composite can contribute to reducing the extreme housing shortage in our country, producing popular homes at low cost and with little time to work

Estudo de um compósito de matriz cerâmica com carga de recicláveis para o uso na construção civi

With a view to revitalizing public environments through criteria that include economy, tourism, aesthetics and respect for the environment, this paper proposes a model of kiosk manufactured with composite material blocks, to be employed as a public instrument. . The model consists of a structure composed of planned blocks and manufactured in cement-based composite, gypsum, ground and water, having the styrofoam inside filled with pet bottles of 500 ml dose. The social and environmental issue is the critical point of the work when it can, through the reuse of environmentally harmful materials such as polyethylene terephthalate PET, using such modules for the construction of various areas of Commerce, promoting the protection of the environment combined with the improvement of the quality of life of the population. The tourism factor, which is significant in the economy of the North, is also considered as the modulated kiosk has a visual aspect innovative and differentiated. The environmental issue is addressed by encouraging the reuse of PET material and EPS (polystyrene)

Descarga em barreira dielétrica: construção de um reator DBD e caracterização mediante análises ópticas e elétricas do plasma produzido

The plasma produced by Dielectric Barrier Discharge (DBD) is a promising technique for producing plasma in atmospheric pressure and has been highlighted in several areas, especially in biomedical and textile industry, this is due to the fact that the plasma generated by DBD not reaches high temperatures, enabling use it for thermally sensitive materials. But still it is necessary the development of research related to understanding of the chemical, physical and biological interaction between the non-thermal plasma at atmospheric pressure with cells, tissues, organs and organisms. This work proposes to develop equipment DBD and characterize it in order to obtain a better understanding of the process parameters of plasma production and how it behaves under the parameters adopted in the process, such as distance, frequency and voltage applied between electrodes. For this purpose two techniques were used to characterize distinct from each other. The first was the method of Lissajous figures, this technique is quite effective and accurately for complete electrical characterization equipment DBD. The second technique used was Optical Emission Spectroscopy (EEO) very effective tool for the diagnosis of plasma with it being possible to identify the excited species present in the plasma produced. Finally comparing the data obtained by the two techniques was possible to identify a set of parameters that optimize the production when combined DBD plasma atmosphere in the equipment was built precisely in this condition 0.5mm-15kV 600Hz, giving way for further work

Desenho e Construção de um protótipo gerador de jato de plasma frio a pressão atmosférica para aplicações biomédicas

Research for better performance materials in biomedical applications are constants. Thus recent studies aimed at the development of new techniques for modification of surfaces. The low pressure plasma has been highlighted for its versatility and for being environmentally friendly, achieving good results in the modification of physic chemical properties of materials. However, it is requires an expensive vacuum system and cannot able to generate superficial changes in specific regions. Furthermore, it is limits their use in polymeric materials and sensitive terms due to high process temperatures. Therefore, new techniques capable of generating cold plasma at atmospheric pressure (APPJ) were created. In order to perform surface treatments on biomaterials in specific regions was built a prototype capable of generating a cold plasma jet. The prototype plasma generator consists of a high voltage source, a support arm, sample port and a nozzle through which the ionized argon. The device was formed to a dielectric tube and two electrodes. This work was varied some parameters such as position between electrodes, voltage and electrical frequency to verify the behavior of glow discharges. The disc of titanium was polished and there was a surface modification. The power consumed, length, intensity and surface modifications of titanium were analyzed. The energy consumed during the discharges was observed by the Lissajous figure method. To check the length of the jets was realized with Image Pro Plus software. The modifications of the titanium surfaces were observed by optical microscopy (OM ) and atomic force microscopy (AFM ). The study showed that variations of the parameters such as voltage, frequency and geometric position between the electrodes influence the formation of the plasma jet. It was concluded that the plasma jet near room temperature and atmospheric pressure was able to cause modifications in titanium surface

A Construção do processo democrático de auto-avaliação institutucional na UNESP

O desenvolvimento de um processo democrático de avaliação institucional na UNESP, uma universidade multi-campus, envolveu três desafios: garantir o envolvimento de grupos representativos da comunidade no processo de avaliação; atribuir poder e responsabilidade a cada setor acadêmico e administrativo no processo de avaliação; criar uma cultura de auto-avaliação e reflexão que possibilitasse debate crítico e auto-gestão dos projetos acadêmicos. Com base nos termos de referência estabelecidos pela comunidade a CPA desenvolveu uma metodologia de avaliação democrática e investigativa, orientada para a auto-gestão e de natureza quali-quantitativa. Fundamentada em três enfoques teóricos de avaliação, o democrático, o de tomada de decisão e o crítico o processo envolveu três funções: a diagnóstica, a formativo-reflexiva e a de revisão crítica. Atualmente os usos dos resultados da avaliação para orientar políticas e decisões acadêmicas, especialmente nos cursos de graduação, evidenciam avanços no processo de internalização de cultura de avaliação orientada para auto-gestão.

Projetos de letramento na educação de jovens e adultos: o ensino da escrita em uma perspectiva emancipatória

This ethnographical research-action is included in the Applied Linguistics area and its study object is related to literacy projects (KLEIMAN, 2000), since they bring a new sense to the literacy practices in school and emphasizes the agentive writing character and the role of the discursive genres in the formation of literacy agents who aim at the action and the social change. Considering the emancipatory potential that these didactic organizations have in the civic literacy of those who live in social risk and vulnerability situations our aim in this investigation is: to reflect about the role of the redefinition of the literacy school practices and investigate how the action of teachers and students as literacy agents occur. The specific aims are: to promote literacy events which encourage the writing practice for the action and social change; to comprehend how the identity construction of the literacy student-agent occurs by the reflection of its agency process in the literacy projects; to identify teaching strategies and procedures which enable the development of emancipatory language practices; to investigate the axiological values constructed by the learners in and about the writing work in literacy projects. Our discussion is based on the language conception supported by Bakhtin (BAKHTIN/VOLOSHINOV, 2000; BAKHTIN, 1990, 2003); in literacy studies (KLEIMAN, 1995; BAYNHAM, 1995; BARTON; HAMILTON; IVANIC, 2000, LAZERE, 2005); on critical studies which defend the idea that the texts are ideological instruments able to give power to the individuals (MCLAREN, 1988, 1991, 1997, 1999, 2000, 2001; FREIRE, 1971, 1978, 1979, 1982, 1992, 1996, 2001a, 2001b, 2009; GIROUX, 1983, 1986, 1990, 1992, 1997, 1999, 2003; APPLE, 1989); on the social genre approach inspired by the New Rhetoric (BAZERMAN, 2005, 2006, 2007; MILLER, 1984, 2009). The data were generated between 2006 and 2010 in the Youth and Adult Education (YAE), in public schools in Natal-RN. The research permitted us to deduce, firstly, that the redefinition of the work with discursive genres provide the learner to read and write to act discursively in the social world, earning, thus, empowerment, autonomy and emancipation; secondly, that involving the students in literacy projects goes beyond didactic competence related to specificities and content domain. It is necessary that the teacher is certain about to whom, what, why and how to teach and that he/she gets a reflexive posture, becoming a learner as well; thirdly, that through the literacy practices which were developed, the collaborators of the research have constructed a more conscious and a more critical view in relation to the language and to the world where they live through the social-political writing and they have improved as interventive and politicized citizens

Construção de mosaicos georreferenciados usando imagens aéreas de pequeno formato

In this work we propose a technique that uses uncontrolled small format aerial images, or SFAI, and stereohotogrammetry techniques to construct georeferenced mosaics. Images are obtained using a simple digital camera coupled with a radio controlled (RC) helicopter. Techniques for removing common distortions are applied and the relative orientation of the models are recovered using projective geometry. Ground truth points are used to get absolute orientation, plus a definition of scale and a coordinate system which relates image measures to the ground. The mosaic is read into a GIS system, providing useful information to different types of users, such as researchers, governmental agencies, employees, fishermen and tourism enterprises. Results are reported, illustrating the applicability of the system. The main contribution is the generation of georeferenced mosaics using SFAIs, which have not yet broadly explored in cartography projects. The proposed architecture presents a viable and much less expensive solution, when compared to systems using controlled pictures

Telejornalismo e interatividade na TV digital: uma construção colaborativa e participativa no espaço digital

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Formação continuada de professores do município de Regente Feijó: a municipalização do ensino fundamental e os desafios da construção de uma política - 1999/2002

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Os desafios e limites na construção do projeto profissional dos jovens que frequentam o ensino médio público e privado

Pós-graduação em Educação - IBRC

Planejamento e plano escolar: um olhar prospectivo sobre a construção do cotidiano

Pós-graduação em Educação - FFC

Aplicativo computacional para projetos de biodigestores rurais

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Educação ambiental crítica e formação de professores: construção coletiva de uma proposta na escola pública

Pós-graduação em Educação para a Ciência - FC

Imagens e metáforas: a (re)construção do trajeto e da história de uma arte-educadora

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)