Avaliação de diferentes inclinações e exposições de telhado em três tipos de cobertura em modelos reduzidos de instalações zootécnicas

The present study was developed in Departamentos de Engenharia Rural e Morfologia e Fisiologia Animal da FCAV/Unesp. The objective of evaluating different roof slopes and exposure in three types of coverage in models of animal installations. Project 48 built reduced models of wood were used with dimensions of 1,00 x 1,00 x 0,50 meters. The covering was one water, lateral and wood floor, disposed in the exhibitions North-south, being 24 prototypes in the north exhibition and 24 in the south. Were used in the covering roofs of ceramic type, galvanized steel and asbestos. The slopes varied of 20, 30, 40 and 50% for ceramic tile and 10, 30, 40 and 50% for the others and with two repetitions for slope. Inside the reduced models temperature readings were accomplished, of hour in hour during one year, for the system of acquisition of Data Logger Campbell Scientific-Ínc and externally the temperature of the air, incident radiation global solar, precipitation, speed and relative humidity of the air were measured. The results obtained during the experimental period of one year were appraised statistically for the statistical package SAS in the factorial outline, where three factors were considered: tile type, slope degree and exposure. The obtained averages were compared through the test of Tukey to 5% of probability. After analyzing the data we found that with increasing slope, there was a decrease in inside temperature in the cover prototypes, therefore, using steeper slopes with 50% of tipping ceramics and asbestos, with greater coverage on display South, we have lower temperatures in poultry houses in the geographic coordinates of the city of Jaboticabal.

Retenção do cátion do sulfato de cobre nos compartimentos biótico e abiótico de mesocosmos com sistema de fluxo contínuo de água

Pós-graduação em Aquicultura - FCAV

Influência do sombreamento natural de duas espécies arbóreas na temperatura de edificações

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência de materiais de cobertura e de alturas de cama, nos índices de conforto térmico e no desempenho de frangos de corte, em Dourados - MS

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Biodigestão anaeróbia e características de cama de frangos obtida sob diferentes quantidades iniciais de casca de arroz e três tipos de cobertura de galpões em Dourados - MS

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação de diferentes materiais de cobertura, inclinações e exposições de telhado na temperatura interna em modelos reduzidos de instalações zootécnicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Tela de sombreamento e pintura em telhados de modelos reduzidos de galpões avícolas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Métodos geofísicos aplicados ao ultramafito da Serra de Quatipuru - Estado do Pará

O objetivo deste trabalho foi a aplicação de métodos geofísicos para a avaliação econômica de ocorrência de níquel, cromo e amianto, em uma área de 6,25 km² - Malha 2 - Serra de Quatipuru, localizada a cerca de 50 km a SW de Conceição do Araguaia, no sul do Estado do Pará. Inicialmente foi aplicado o método magnético em caráter de reconhecimento, usando magnetômetros de campo total e componente vertical visando localizar zonas anômalas de amianto e cromita, uma vez que estes minerais se encontram associados com a magnetita. Em seguida foi usado o método eletromagnético de "dip angle" com o objetivo de definir zonas condutoras associadas a possíveis depósitos minerais ou características estruturais. Com base na interpretação destes dois métodos, definiu-se os locais de aplicação do método de polarização elétrica induzida-resistividade, que teve caráter de detalhe visando como alvo principal depósitos de sulfetos disseminados. As possíveis ocorrências minerais na área foram correlacionadas com anomalias geofísicas e confirmadas através de testemunhos de sondagem concluindo-se não serem de importância econômica. Contudo a aplicação destes métodos geofísicos foi útil, pois possibilitou o levantamento detalhado da área, que de outra forma só poderia ser realizado por meio dos métodos mais convencionais, tais como sondagem mecânica através de perfurações, os quais são muito caros e demorados.

Cidadania e doenças profissionais: o caso do amianto

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ultramafic complexes and associated mineral deposits in the Precambrian of eastern Minas Gerais, Brazil

Based on field work, prospection and petrographic studies ultramafic complexes and their mineral deposits from eastern Minas Gerais in southeastern Brazil are generally outlined to form a basis for future investigations in this region. The bodies dealt with occur at Ipanema, Córrego Novo, Bela Vista de Minas, Rio Pomba and Liberdade. These ultramafic bodies are generally enclosed in high-grade gneisses and consist of serpentinized peridotites and harzburgites which were metamorphosed together with their country rocks in upper amphibolite to granulite facies. Weathering of these rocks gives rise to nickeliferous laterite, while metamorphism has resulted in anthophyllite asbestos and talc deposits. © 1985 Springer-Verlag.

Thermal efficiency of fiber cement corrugated sheets applied to individual housing for calves exposed to sun and shade

This research presents a study of roof thermal efficiency in individual housing for calves exposed to sun and shade through infrared thermography, internal temperature and thermal comfort indexes. Four different individual housing for calves covered with asbestos-free fiber-cement corrugated sheets were evaluated. Three of them were directly exposed to the sun: (i) corrugated sheets painted white in the external surface, (ii) corrugated sheets without painting and (iii) with screen shade fabric installed 0.10m under de internal surface of the corrugated sheet. The fourth individual housing was installed in the shade area and covered with unpainted corrugated fiber-cement sheets. The analysis was taken for 21 days at 11h00min, 14h00min and 17h00min. The results indicate significant variations in the roofing surface temperature and thermal comfort indexes among the treatments exposed to the sun and shade, for all the evaluations during the day. The infrared thermography images were effective for better understanding the heat transfer processes from the roof to the internal environment of the housing.

Sustainable improvement of water networks : to achieve best decisions for rehabilitation plans using advanced GIS and statistical techniques

Many of developing countries are facing crisis in water management due to increasing of population, water scarcity, water contaminations and effects of world economic crisis. Water distribution systems in developing countries are facing many challenges of efficient repair and rehabilitation since the information of water network is very limited, which makes the rehabilitation assessment plans very difficult. Sufficient information with high technology in developed countries makes the assessment for rehabilitation easy. Developing countries have many difficulties to assess the water network causing system failure, deterioration of mains and bad water quality in the network due to pipe corrosion and deterioration. The limited information brought into focus the urgent need to develop economical assessment for rehabilitation of water distribution systems adapted to water utilities. Gaza Strip is subject to a first case study, suffering from severe shortage in the water supply and environmental problems and contamination of underground water resources. This research focuses on improvement of water supply network to reduce the water losses in water network based on limited database using techniques of ArcGIS and commercial water network software (WaterCAD). A new approach for rehabilitation water pipes has been presented in Gaza city case study. Integrated rehabilitation assessment model has been developed for rehabilitation water pipes including three components; hydraulic assessment model, Physical assessment model and Structural assessment model. WaterCAD model has been developed with integrated in ArcGIS to produce the hydraulic assessment model for water network. The model have been designed based on pipe condition assessment with 100 score points as a maximum points for pipe condition. As results from this model, we can indicate that 40% of water pipeline have score points less than 50 points and about 10% of total pipes length have less than 30 score points. By using this model, the rehabilitation plans for each region in Gaza city can be achieved based on available budget and condition of pipes. The second case study is Kuala Lumpur Case from semi-developed countries, which has been used to develop an approach to improve the water network under crucial conditions using, advanced statistical and GIS techniques. Kuala Lumpur (KL) has water losses about 40% and high failure rate, which make severe problem. This case can represent cases in South Asia countries. Kuala Lumpur faced big challenges to reduce the water losses in water network during last 5 years. One of these challenges is high deterioration of asbestos cement (AC) pipes. They need to replace more than 6500 km of AC pipes, which need a huge budget to be achieved. Asbestos cement is subject to deterioration due to various chemical processes that either leach out the cement material or penetrate the concrete to form products that weaken the cement matrix. This case presents an approach for geo-statistical model for modelling pipe failures in a water distribution network. Database of Syabas Company (Kuala Lumpur water company) has been used in developing the model. The statistical models have been calibrated, verified and used to predict failures for both networks and individual pipes. The mathematical formulation developed for failure frequency in Kuala Lumpur was based on different pipeline characteristics, reflecting several factors such as pipe diameter, length, pressure and failure history. Generalized linear model have been applied to predict pipe failures based on District Meter Zone (DMZ) and individual pipe levels. Based on Kuala Lumpur case study, several outputs and implications have been achieved. Correlations between spatial and temporal intervals of pipe failures also have been done using ArcGIS software. Water Pipe Assessment Model (WPAM) has been developed using the analysis of historical pipe failure in Kuala Lumpur which prioritizing the pipe rehabilitation candidates based on ranking system. Frankfurt Water Network in Germany is the third main case study. This case makes an overview for Survival analysis and neural network methods used in water network. Rehabilitation strategies of water pipes have been developed for Frankfurt water network in cooperation with Mainova (Frankfurt Water Company). This thesis also presents a methodology of technical condition assessment of plastic pipes based on simple analysis. This thesis aims to make contribution to improve the prediction of pipe failures in water networks using Geographic Information System (GIS) and Decision Support System (DSS). The output from the technical condition assessment model can be used to estimate future budget needs for rehabilitation and to define pipes with high priority for replacement based on poor condition. rn

A comparison of acute and long-term effects of industrial multiwalled carbon nanotubes on human lung and immune cells in vitro

The close resemblance of carbon nanotubes to asbestos fibers regarding their high aspect ratio, biopersistence and reactivity increases public concerns on the widespread use of these materials. The purpose of this study was not only to address the acute adverse effects of industrially produced multiwalled carbon nanotubes (MWCNTs) on human lung and immune cells in vitro but also to further understand if their accumulation and biopersistence leads to long-term consequences or induces adaptive changes in these cells. In contrast to asbestos fibers, pristine MWCNTs did not induce overt cell death in A549 lung epithelial cells and Jurkat T lymphocytes after acute exposure to high doses of this material (up to 30 g/ml). Nevertheless, very high levels of reactive oxygen species (ROS) and decreased metabolic activity were observed which might affect long-term viability of these cells. However, the continuous presence of low amounts of MWCNTs (0.5 g/ml) for 6 months did not have major adverse long-term effects although large amounts of nanotubes accumulated at least in A549 cells. Moreover, MWCNTs did not appear to induce adaptive mechanisms against particle stress in long-term treated A549 cells. Our study demonstrates that despite the high potential for ROS formation, pristine MWCNTs can accumulate and persist within cells without having major long-term consequences or inducing adaptive mechanisms.

Investigating the interaction of cellulose nanofibers derived from cotton with a sophisticated 3D human lung cell coculture

Cellulose nanofibers are an attractive component of a broad range of nanomaterials. Their intriguing mechanical properties and low cost, as well as the renewable nature of cellulose make them an appealing alternative to carbon nanotubes (CNTs), which may pose a considerable health risk when inhaled. Little is known, however, concerning the potential toxicity of aerosolized cellulose nanofibers. Using a 3D in vitro triple cell coculture model of the human epithelial airway barrier, it was observed that cellulose nanofibers isolated from cotton (CCN) elicited a significantly (p < 0.05) lower cytotoxicity and (pro-)inflammatory response than multiwalled CNTs (MWCNTs) and crocidolite asbestos fibers (CAFs). Electron tomography analysis also revealed that the intracellular localization of CCNs is different from that of both MWCNTs and CAFs, indicating fundamental differences between each different nanofibre type in their interaction with the human lung cell coculture. Thus, the data shown in the present study highlights that not only the length and stiffness determine the potential detrimental (biological) effects of any nanofiber, but that the material used can significantly affect nanofiber-cell interactions.

The role of muscle flap in preventing bronchus stump insufficiency after pneumonectomy for malignant pleural mesothelioma in high-risk patients

Bronchus stump insufficiency (BSI) is one of the major complications after pneumonectomy; we analyzed all patients who underwent extra pleural pneumonectomy (EPP) for malignant pleural mesothelioma (MPM) in order to detect the role of muscle flap (MF) on preventing early and late stump insufficiency. From January 2000 until December 2005, there were 42 patients admitted with MPM for further intervention at our institution. Thirty patients were suitable for surgery and thus received a multimodal treatment with neo-adjuvant chemotherapy using Cisplatin and Gemcitabin (Gemzar), EPP followed by 54 Gray (Gy) adjuvant radiotherapy. Data were collected from the surgical and oncological records. There were 37 male patients (88%), the median age was 65 years (range 40-83 years). Seven (17%) patients had concomitant diseases. Forty patients (95%) had asbestos exposition. The operative procedures were EPP with muscle flap through an anterolateral thoracotomy. Univariate and multivariate analyses were done. One patient (3%) died on the 2nd postoperative day due to lung embolism. Mild complications were noticed in the early postoperative phase in 8 (25%) patients. There was no early or late stump insufficiency during the 15-month follow-up. Surgical techniques using muscle flap seems to play a major role in the prevention of bronchus stump insufficiency especially after neo-adjuvant chemotherapy.