Occupational and non-occupational risk factors in bladder cancer patients in an industrialized area located in former East-Germany [Berufliche und außerberufliche Risikofaktoren für das Harnblasenkarzinom in einem ehemaligen Industriegebiet der neuen Bundesländer]

Purpose: Several occupational carcinogens are metabolized by polymorphic enzymes. The distribution of the polymorphic enzymes N-acetyltransferase 2 (NAT2; substrates: aromatic amines), glutathione S-transferase M1 (GSTM1; substrates: e.g., reactive metabolites of polycyclic aromatic hydrocarbons), and glutathione S-transferase T1 (GSTT1; substrates: small molecules with 1-2 carbon atoms) were investigated. Material and Methods: At the urological department in Lutherstadt Wittenberg, 136 patients with a histologically proven transitional cell cancer of the urinary bladder were investigated for all occupations performed for more than 6 months. Several occupational and non-occupational risk factors were asked. The genotypes of NAT2, GSTM1, and GSTT1 were determined from leucocyte DNA by PCR. Results: Compared to the general population in Middle Europe, the percentage of GSTT1 negative persons (22.1 %) was ordinary; the percentage of slow acetylators (59.6%) was in the upper normal range, while the percentage of GSTM1 negative persons (58.8%) was elevated in the entire group. Shifts in the distribution of the genotypes were observed in subgroups who had been exposed to asbestos (6/6 GSTM1 negative, 5/6 slow acetylators), rubber manufacturing (8/10 GSTM1 negative), and chlorinated solvents (9/15 GSTM1 negative). Conclusions: The overrepresentation of GSTM1 negative bladder cancer patients also in this industrialized area and more pronounced in several occupationally exposed subgroups points to an impact of the GSTM1 negative genotype in bladder carcinogenesis. [Article in German]

Cyclododecane as support material for clean and facile transfer of large-area few-layer graphene

The transfer of chemical vapor deposited graphene is a crucial process, which can affect the quality of the transferred films and compromise their application in devices. Finding a robust and intrinsically clean material capable of easing the transfer of graphene without interfering with its properties remains a challenge. We here propose the use of an organic compound, cyclododecane, as a transfer material. This material can be easily spin coated on graphene and assist the transfer, leaving no residues and requiring no further removal processes. The effectiveness of this transfer method for few-layer graphene on a large area was evaluated and confirmed by microscopy, Raman spectroscopy, x-ray photoemission spectroscopy, and four-point probe measurements. Schottky-barrier solar cells with few-layer graphene were fabricated on silicon wafers by using the cyclododecane transfer method and outperformed reference cells made by standard methods.

Application of XRF and correspondence analysis to provenance studies of coastal and inland archaeological pottery from the Mngeni river area, South Africa

XRF spectrometry was applied to provenance studies of Iron Age pottery specimens that originated from the Mngeni river area in South Africa. Ten transition metals (Sc to Zn) mere determined in 107 potsherds, excavated from four different sites. The data were subjected to a computerized mathematical technique (correspondence analysis), which was used to group the samples according to the similarity of their elemental distributions. The groupings were interpreted in terms of social or cultural interaction between the sites. (C) 1997 by John Wiley & Sons, Ltd.

The use of correspondence analysis to compare major and trace elements for provenance studies of iron-age pottery from the Mngeni river area, South Africa

Provenance studies of iron-age pottery specimens originating from the Mngeni river area in South Africa was carried out by applying XRF spectrometry. A total of sixteen major and trace elements were analysed in a batch of 107 potsherds, excavated from four different archaeological sites in the aforementioned area. A multivariate statistical programme Correspondence Analysis was used in this study to obtain the relevant clustering patterns according to the similarity of the elemental distributions. Differences and similarities in the clusters obtained for the majors and trace elements are discussed.

Bisphenol A exposure is not associated with area-level socioeconomic index in Australian children using pooled urine samples

Bisphenol A (BPA) is used extensively in food-contact materials and has been detected routinely in populations worldwide, and this exposure has been linked to a range of negative health outcomes in humans. There is some evidence of an association between BPA and different socioeconomic variables which may be the result of different dietary patterns. The aim of this study was to conduct a preliminary investigation of the association between BPA and socioeconomic status in Australian children using pooled urine specimens and an area level socioeconomic index. Surplus pathology urine specimens collected from children aged 0-15 years in Queensland, Australia as samples of convenience (n = 469) were pooled by age, sex and area level socioeconomic index (n = 67 pools), and analysed for total BPA using online solid phase extraction LC-MS/MS. Concentration ranged from 1.08-27.4 ng/ml with geometric mean 2.57 ng/ml, and geometric mean exposure was estimated as 70.3 ng/kg d-1. Neither BPA concentration nor excretion was associated with age or sex, and the authors found no evidence of an association with socioeconomic status. These results suggest that BPA exposure is not associated with socioeconomic status in the Australian population due to relatively homogenous exposures in Australia, or that the socioeconomic gradient is relatively slight in Australia compared with other OECD countries.

Introduction : studying Indonesian media worlds at the intersections of area and cultural studies

When preparing this special issue,1 our discussions with the editorial board of the International Journal of Cultural Studies (IJCS) included a moment of simultaneous surprise and reflection, which we would like to use as a starting point for our introduction to the articles appearing here. This occurred during communications about the number and length of the articles required for a special issue. The board’s representative stipulated that a specific number of articles were to be written by Indonesian scholars. The request surprised us. We had neither discussed nor anticipated ethnic or national quotas for authorial participation. But although the request caught us off guard it also stimulated us to think about the two disciplinary terrains traversed in the articles to follow.

Wide area control of SVCs for first swing stabilisation and damping in longitudinal systems

A non-linear Kalman filter based control strategy for SVCs located in major load groups is presented. This focusses on the limitation and damping of inter-area modes. It does this through treating local modes as noise and uses a tunable nonlinear control algorithm to improve both first swing stability and system damping. Simulation on a four machine system shows that the Kalman filer can successfully lock on to a desired inter-area mode and obtain a 31% improvement in critical clearing time as well as improved damping.

A deformable Brodmann area atlas

Functional MRI studies commonly refer to activation patterns as being localized in specific Brodmann areas, referring to Brodmann’s divisions of the human cortex based on cytoarchitectonic boundaries [3]. Typically, Brodmann areas that match regions in the group averaged functional maps are estimated by eye, leading to inaccurate parcellations and significant error. To avoid this limitation, we developed a method using high-dimensional nonlinear registration to project the Brodmann areas onto individual 3D co-registered structural and functional MRI datasets, using an elastic deformation vector field in the cortical parameter space. Based on a sulcal pattern matching approach [11], an N=27 scan single subject atlas (the Colin Holmes atlas [15]) with associated Brodmann areas labeled on its surface, was deformed to match 3D cortical surface models generated from individual subjects’ structural MRIs (sMRIs). The deformed Brodmann areas were used to quantify and localize functional MRI (fMRI) BOLD activation during the performance of the Tower of London task [7].

How to plan and implement an environmental education program for a conservation area : lessons from Australia and Borneo

The Augo Wetland Forest Park, along with other conservation areas around the world, provides an opportunity for a personal connection with the natural world - an opportunity for creating ways to convince people to reverse the degradation of the planet. In this presentation I use the settings approach, as used by the World Health Organisation in health promotion, as a framework. The WHO’s 1986 Ottawa Charter states that "Health is created and lived by people within the settings of their everyday life; where they learn, work, play, and love." I argue that, similarly, a conservation area provides a setting for people to connect with environmental issues and can be the place where positive behaviours and actions for the environment are created and enacted. In a wired and virtual world, such settings may be the only opportunity some people, especially children, get to connect with the environment. An evidence-based, intentionally designed and implemented environmental education program enhances the opportunities for the personal connection and subsequent action. Planning and implementing an Environmental education program for a conservation area requires an understanding of the principles of three domains: • Environmental Communication • Environmental Education • Environmental Interpretation In this presentation I define these domains and demonstrate how they become interdependent within the context of a particular setting such as a conservation area. I outline the principles of each domain and demonstrate how they can be enacted with reference to environmental education program case studies from settings in Australia and Borneo. The first case study is based around a proposal for a planned residential community at Eden’s Crossing, in Brisbane’s high growth Western corridor. The setting featured a number of important natural and heritage conservation characteristics and the developer wanted to be pro-active in informing the market what this development aims to achieve in terms of innovative community and environmental objectives. By designing an education and interpretation program in line with best practice education and interpretation principles the developers would be assisted in their efforts to build community, preserve heritage, and facilitate environmentally sensitive lifestyles for the future residents of Eden’s Crossing. Above all, the strategy focused on advancing sustainability in a way that made the Eden’s Crossing greenfield development significantly greener. It did this by interacting with prospective purchasers, and building knowledge about sustainability with a view to shaping the future community of Eden’s Crossing in terms of attitudes and behaviours. The second case study is based around the development of the Rainforest Interpretation Centre (RIC), now renamed the Rainforest Discovery Centre, an environmental education facility managed by the Sabah Forestry Department (SFD) and located at the edge of the Kabili-Sepilok Forest Reserve in the East Malaysian state of Sabah (Borneo). This setting is of paramount importance for biodiversity conservation and research and a vital habitat for orang utan. As an Environmental Education Consultant I was tasked with developing an environmental education program for this setting as part of the SFD’s long- term strategy towards sustainable forest management. By employing the principles of Environmental Education and Environmental Interpretation I designed and implemented a program with three major components: • an environmental education component for visiting primary and secondary school groups. • an environmental education component for in-service and pre-service teachers and teacher educators. • a public awareness and environmental interpretation component which caters for the general public and tourists. From these modest beginnings the program has expanded and new facilities have been developed to meet the demands of visitors, teachers and students. The effectiveness of the program can be traced back to the grounding in the principles of best practice environmental education, communication and interpretation.

Estimation of inhaled ultrafine particle surface area dose for urban environments

There is considerable scientific interest in personal exposure to ultrafine particles. Owing to their small size, these particles are able to penetrate deep into the lungs, where they may cause adverse respiratory, pulmonary and cardiovascular health effects. This article presents Bayesian hierarchical models for estimating and comparing inhaled particle surface area in the lung.

Wide-area damping control for inter-area oscillations using inverse filtering technique

In this study, a non-linear excitation controller using inverse filtering is proposed to damp inter-area oscillations. The proposed controller is based on determining generator flux value for the next sampling time which is obtained by maximising reduction rate of kinetic energy of the system after the fault. The desired flux for the next time interval is obtained using wide-area measurements and the equivalent area rotor angles and velocities are predicted using a non-linear Kalman filter. A supplementary control input for the excitation system, using inverse filtering approach, to track the desired flux is implemented. The inverse filtering approach ensures that the non-linearity introduced because of saturation is well compensated. The efficacy of the proposed controller with and without communication time delay is evaluated on different IEEE benchmark systems including Kundur's two area, Western System Coordinating Council three-area and 16-machine, 68-bus test systems.