Comparative analysis of performance and stability among composite cross populations, variety mixtures and pure lines of winter wheat in organic and conventional cropping systems

This study investigated the effects of increased genetic diversity in winter wheat (Triticum aestivum L.), either from hybridization across genotypes or from physical mixing of lines, on grain yield, grain quality, and yield stability in different cropping environments. Sets of pure lines (no diversity), chosen for high yielding ability or high quality, were compared with line mixtures (intermediate level of diversity), and lines crossed with each other in composite cross populations (CCPn, high diversity). Additional populations containing male sterility genes (CCPms) to increase outcrossing rates were also tested. Grain yield, grain protein content, and protein yield were measured at four sites (two organically-managed and two conventionally-managed) over three years, using seed harvested locally in each preceding year. CCPn and mixtures out-yielded the mean of the parents by 2.4% and 3.6%, respectively. These yield differences were consistent across genetic backgrounds but partly inconsistent across cropping environments and years. Yield stability measured by environmental variance was higher in CCPn and CCPms than the mean of the parents. An index of yield reliability tended to be higher in CCPn, CCPms and mixtures than the mean of the parents. Lin and Binns’ superiority values of yield and protein yield were consistently and significantly lower (i.e. better) in the CCPs than in the mean of the parents, but not different between CCPs and mixtures. However, CCPs showed greater early ground cover and plant height than mixtures. When compared with the (locally non-predictable) best-yielding pure line, CCPs and mixtures exhibited lower mean yield and somewhat lower yield reliability but comparable superiority values. Thus, establishing CCPs from smaller sets of high-performing parent lines might optimize their yielding ability. On the whole, the results demonstrate that using increased within-crop genetic diversity can produce wheat crops with improved yield stability and good yield reliability across variable and unpredictable cropping environments.

Determinants and effects of central bank independence reforms

This thesis consists of four empirically oriented papers on central bank independence (CBI) reforms.    Paper [1] is an investigation of why politicians around the world have chosen to give up power to independent central banks, thereby reducing their ability to control the economy. A new data-set, including the possible occurrence of CBI-reforms in 132 countries during 1980-2005, was collected. Politicians in non-OECD countries were more likely to delegate power to independent central banks if their country had been characterized by high variability in inflation and if they faced a high probability of being replaced. No such effects were found for OECD countries.    Paper [2], using a difference-in-difference approach, studies whether CBI reform matters for inflation performance. The analysis is based on a dataset including the possible occurrence of CBI-reforms in 132 countries during the period of 1980-2005. CBI reform is found to have contributed to bringing down inflation in high-inflation countries, but it seems unrelated to inflation performance in low-inflation countries.    Paper [3] investigates whether CBI-reforms are important in reducing inflation and maintaining price stability, using a random-effects random-coefficients model to account for heterogeneity in the effects of CBI-reforms on inflation. CBI-reforms are found to have reduced inflation on average by 3.31 percent, but the effect is only present when countries with historically high inflation rates are included in the sample. Countries with more modest inflation rates have achieved low inflation without institutional reforms that grant central banks more independence, thus undermining the time-inconsistency theory case for CBI. There is furthermore no evidence that CBI-reforms have contributed to lower inflation variability    Paper [4] studies the relationship between CBI and a suggested trade-off between price variability and output variability using data on CBI-levels, and data the on implementation dates of CBI-reforms. The results question the existence of such a trade-off, but indicate that there may still be potential gains in stabilization policy from CBI-reforms.

Ubiquitous computing in education : a SWOT analysis by students and teachers

Learning from anywhere anytime is a contemporary phenomenon in the field of education that is thought to be flexible, time and cost saving. The phenomenon is evident in the way computer technology mediates knowledge processes among learners. Computer technology is however, in some instances, faulted. There are studies that highlight drawbacks of computer technology use in learning. In this study we aimed at conducting a SWOT analysis on ubiquitous computing and computer-mediated social interaction and their affect on education. Students and teachers were interviewed on the mentioned concepts using focus group interviews. Our contribution in this study is, identifying what teachers and students perceive to be the strength, weaknesses, opportunities and threats of ubiquitous computing and computer-mediated social interaction in education. We also relate the findings with literature and present a common understanding on the SWOT of these concepts. Results show positive perceptions. Respondents revealed that ubiquitous computing and computer-mediated social interaction are important in their education due to advantages such as flexibility, efficiency in terms of cost and time, ability to acquire computer skills. Nevertheless disadvantages where also mentioned for example health effects, privacy and security issues, noise in the learning environment, to mention but a few. This paper gives suggestions on how to overcome threats mentioned.

Avaliação de impactos e custos ambientais em processos industriais : uma abordagem metodológica

A preocupação com a qualidade ambiental aumentou significativamente nos últimos anos. Isso é evidenciado pela rígida legislação ambiental e pela mudança de comportamento da sociedade frente a esse assunto. Nesse contexto, as indústrias vêm sendo pressionadas a adequar seus processos produtivos às novas exigências. A fim de auxiliá-las nessa tarefa, várias metodologias de avaliação ambiental foram desenvolvidas, entre elas a Avaliação do Ciclo de Vida (Life Cycle Assessment – LCA). Ela se destaca por buscar soluções globais e efetivas para os problemas ambientais, através de uma análise sistêmica. No entanto, assim como outras metodologias, o LCA não apresenta uma avaliação econômica estruturada em conjunto com a ambiental. Esta dissertação tem a finalidade de contribuir para o preenchimento dessa lacuna, através do desenvolvimento de uma abordagem consistente e estruturada, capaz de avaliar simultaneamente impactos e custos ambientais em processos industriais. Para isso, foram utilizados como bases teóricas o LCA, o Modelo Econômico de Controle e Avaliação de Impactos Ambientais (MECAIA), a Metodologia para a Contabilidade do Gerenciamento Ambiental (Environmental Management Accounting – EMA), o Método de Custeio Baseado em Atividades (Activity Based Costing – ABC), a Avaliação de Riscos (Risk Assessment) e a Análise de Modos e Efeitos de Falhas (Failure Mode and Effects Analysis – FMEA). A abordagem desenvolvida foi aplicada em uma indústria do setor metal-mecânico para avaliar os impactos e os custos ambientais de seu processo produtivo, evidenciando que aparentemente há uma relação direta entre esses dois fatores, ou seja, os resíduos que geram maior impacto sobre o meio ambiente também apresentam maior custo associado Por fim, constatou-se que a combinação das metodologias, dos métodos e dos modelos utilizados permitiu a elaboração de uma abordagem capaz de orientar a análise de um processo produtivo, a fim de identificar quais as etapas que geram maior impacto sobre o meio ambiente, além de apurar os gastos ambientais e classificá-los nas categorias de prevenção, correção e geração.

Voltage-composition profile and synchrotron X-ray structural analysis of low and high temperature LixCoO2 host material

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Immunoassays for pesticide analysis in environmental and food matrices

Immunochemical methods have increased considerably in the past years, and many examples of small and large scale studies have demonstrated the reliability of the immunotechniques for control and monitoring gf contaminant residues in different kinds of samples. Application of the immunoassay (IA) methods in pesticide residue control is an area with enormous potential for growth. The most extensively studied IA is the enzyme-linked absorbent assay (ELISA), but several other approaches, that include radioimmunoassay and immunoaffinity chromatography, have been also developed recently. In comparison with classical analytical methods, IA methods offer the possibility of highly sensitive, relatively vapid, and cost-effective measurements. This paper introduces the general IAs used until now, focusing on their use in pesticide analysis, and discussing briefly the effects of interferences from solvent residues or matrix components on the IA performance. Numerous immunochemical methods commonly used for pesticide determination in different samples such as food, crop and environmental samples are presented.

Analysis of biodiesel and frying vegetable oils by means of FTIR photoacoustic spectroscopy

Fourier Transform Infrared Photoacoustic Spectroscopy was used to determine the mid-infrared vibrational modes of biodiesel and vegetable oils. Our results indicate that this method can contribute significantly to the biodiesel wash process during the sample preparation. Besides, by analyzing the spectra of vegetable oils used to fry snacks we could to monitor the degradation in function of the fried time.

A Meta-Analysis of Predation Risk Effects on Pollinator Behaviour

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Viral infections in workers in hospital and research laboratory settings: a comparative review of infection modes and respective biosafety aspects

Objectives: To compare modes and sources of infection and clinical and biosafety aspects of accidental viral infections in hospital workers and research laboratory staff reported in scientific articles. Methods: PubMed, Google Scholar, ISI Web of Knowledge, Scirus, and Scielo were searched (to December 2008) for reports of accidental viral infections, written in English, Portuguese, Spanish, or German; the authors' personal file of scientific articles and references from the articles retrieved in the initial search were also used. Systematic review was carried out with inclusion criteria of presence of accidental viral infection's cases information, and exclusion criteria of absence of information about the viral etiology, and at least probable mode of infection.Results: One hundred and forty-one scientific articles were obtained, 66 of which were included in the analysis. For arboviruses, 84% of the laboratory infections had aerosol as the source; for alphaviruses alone, aerosol exposure accounted for 94% of accidental infections. of laboratory arboviral infections, 15.7% were acquired percutaneously, whereas 41.6% of hospital infections were percutaneous. For airborne viruses, 81% of the infections occurred in laboratories, with hantavirus the leading causative agent. Aerosol inhalation was implicated in 96% of lymphocytic choriomeningitis virus infections, 99% of hantavirus infections, and 50% of coxsackievirus infections, but infective droplet inhalation was the leading mode of infection for severe acute respiratory syndrome coronavirus and the mucocutaneous mode of infection was involved in the case of infection with influenza B. For blood-borne viruses, 92% of infections occurred in hospitals and 93% of these had percutaneous mode of infection, while among laboratory infections 77% were due to infective aerosol inhalation. Among blood-borne virus infections there were six cases of particular note: three cases of acute hepatitis following hepatitis C virus infection with a short period of incubation, one laboratory case of human immunodeficiency virus infection through aerosol inhalation, one case of hepatitis following hepatitis G virus infection, and one case of fulminant hepatitis with hepatitis B virus infection following exposure of the worker's conjunctiva to hepatitis B virus e antigen-negative patient saliva. of the 12 infections with viruses with preferential mucocutaneous transmission, seven occurred percutaneously, aerosol was implicated as a possible source of infection in two cases, and one atypical infection with Macacine herpesvirus 1 with fatal encephalitis as the outcome occurred through a louse bite. One outbreak of norovirus infection among hospital staff had as its probable mode of infection the ingestion of inocula spread in the environment by fomites.Conclusions: The currently accepted and practiced risk analysis of accidental viral infections based on the conventional dynamics of infection of the etiological agents is insufficient to cope with accidental viral infections in laboratories and to a lesser extent in hospitals, where unconventional modes of infection are less frequently present but still have relevant clinical and potential epidemiological consequences. Unconventional modes of infection, atypical clinical development, or extremely severe cases are frequently present together with high viral loads and high virulence of the agents manipulated in laboratories. In hospitals by contrast, the only possible association of atypical cases is with the individual resistance of the worker. Current standard precaution practices are insufficient to prevent most of the unconventional infections in hospitals analyzed in this study; it is recommended that special attention be given to flaviviruses in these settings. (C) 2011 International Society for Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Phase analysis of seeded and doped PbMg1/3Nb2/3O3 prepared by organic solution of citrates

PbMg1/3Nb2/3O3 (PMN) prepared by organic solution of citrates was analyzed by the Rietveld method to determine the influence of seeds and dopants on the perovskite and pyrochlore phase formation. It was observed that pyrochlore phase formation increases with an increase in calcination time when no additives are included during the preparation. It was also observed that a greater amount of perovskite phase appeared in doped or seeded samples. The fraction of perovskite phase increased from 88 mol % in pure sample to ∼95 mol % in doped and seeded samples calcined at 800°C for 1 h. It is clear that the addition of dopants or seeds during PMN preparation can enhance the formation of perovskite phase.

Synaptonemal complex analysis of Nellore and Gyr breeds of Bos taurus indicus

A synaptonemal complex (SC) study of specimens of Nellore and Gyr breeds of Bos taurus indicus was performed with the main objective to identify and determinate the frequency of abnormalities of SC and the frequency of cells with abnormalities. All animals analyzed had 29 autosomal bivalents and one sexual bivalent. The Nellore breed had 30.00% of cells with SC abnormalities while the Gyr breed had only 11.11%. Statistical analyses showed that there were not significant differences for the number of cells with abnormalities among the breeds studied. The subspecies Bos taurus indicus had 16.92% of cells showing abnormalities, being 62.82% of these abnormalities in zygotene and 37.18% in pachytene. Some aspects regarding the frequency of cells with abnormalities and the fertility of Nellore and Gyr breeds are discussed.

Comparative analysis of current and voltage-controlled photovoltaic Maximum Power Point tracking

Maximum Power Point tracking (MPPT) in photovoltaic (PV) systems may be achieved by controlling either the voltage or current of the PV device. There is no consensus in the technical literature about how is the best choice. This paper provides a comparative analysis performance among current and voltage control using two different MPPT strategies: the perturb and observe (P&O) and the incremental conductance techniques. © 2011 IEEE.

Matrix effect on butyltin analysis of sediments and fish tissues by GC-PFPD

Butyltin (BTs) quantification in environmental matrices can be affected by interfering species found primarily in complex matrices,such as sediment and biota tissues. This study investigated matrix effects in analytical procedures for butyltin (TBT,DBT and MBT) quantification and speciation in sediments and in two fish tissues (gill and liver) by gas chromatography with pulsed flame photometric detection (GC-PFPD) analysis. Unlike sediment samples,tissues exhibited a significant matrix effect,thus,the quantification should be made by curve over matrix to avoid quantification errors and loss of analytical accuracy. © 2013 Sociedade Brasileira de Química.

Genotoxic evaluation of the antimalarial drugs artemisinin and artesunate in human HepG2 cells and effects on CASP3 and SOD1 gene expressions

The malaria treatment recommended by the World Health Organization involves medicines derived from artemisinin, an active compound extracted from the plant Artemisia annua, and some of its derivatives, such as artesunate. Considering the lack of data regarding the genotoxic effects of these compounds in human cells, the objective of this study was to evaluate the cytotoxicity and genotoxicity, and expressions of the CASP3 and SOD1 genes in a cultured human hepatocellular liver carcinoma cell line (HepG2 cells) treated with artemisinin and artesunate. We tested concentrations of 2.5, 5, 7.5, 10, and 20 μg/mL of both substances with a resazurin cytotoxicity assay, and the concentrations used in the genotoxicity experiments (2.5, 5, and 10 μg/mL) and gene expression analysis (5 mg/mL) were determined. The results of the comet assay in cells treated with artemisinin and artesunate showed a significant dosedependent increase (P < 0.001) in the number of cells with DNA damage at all concentrations tested. However, the gene expression analysis revealed no significant change in expression of CASP3 or SOD1. Our data showed that although artemisinin and artesunate exhibited genotoxic effects in cultured HepG2 cells, they did not significantly alter expression of the CASP3 and SOD1 genes at the doses tested. ©FUNPEC-RP.

Triplet entropy analysis of hemagglutinin and neuraminidase sequences measures influenza virus phylodynamics

The influenza virus has been a challenge to science due to its ability to withstand new environmental conditions. Taking into account the development of virus sequence databases, computational approaches can be helpful to understand virus behavior over time. Furthermore, they can suggest new directions to deal with influenza. This work presents triplet entropy analysis as a potential phylodynamic tool to quantify nucleotide organization of viral sequences. The application of this measure to segments of hemagglutinin (HA) and neuraminidase (NA) of H1N1 and H3N2 virus subtypes has shown some variability effects along timeline, inferring about virus evolution. Sequences were divided by year and compared for virus subtype (H1N1 and H3N2). The nonparametric Mann-Whitney test was used for comparison between groups. Results show that differentiation in entropy precedes differentiation in GC content for both groups. Considering the HA fragment, both triplet entropy as well as GC concentration show intersection in 2009, year of the recent pandemic. Some conclusions about possible flu evolutionary lines were drawn. © 2013 Elsevier B.V.