Local systems, global impacts : Using life cycle assessment to analyse the potential and constraints of industrial symbioses

Human activities extract and displace different substances and materials from the earth s crust, thus causing various environmental problems, such as climate change, acidification and eutrophication. As problems have become more complicated, more holistic measures that consider the origins and sources of pollutants have been called for. Industrial ecology is a field of science that forms a comprehensive framework for studying the interactions between the modern technological society and the environment. Industrial ecology considers humans and their technologies to be part of the natural environment, not separate from it. Industrial operations form natural systems that must also function as such within the constraints set by the biosphere. Industrial symbiosis (IS) is a central concept of industrial ecology. Industrial symbiosis studies look at the physical flows of materials and energy in local industrial systems. In an ideal IS, waste material and energy are exchanged by the actors of the system, thereby reducing the consumption of virgin material and energy inputs and the generation of waste and emissions. Companies are seen as part of the chains of suppliers and consumers that resemble those of natural ecosystems. The aim of this study was to analyse the environmental performance of an industrial symbiosis based on pulp and paper production, taking into account life cycle impacts as well. Life Cycle Assessment (LCA) is a tool for quantitatively and systematically evaluating the environmental aspects of a product, technology or service throughout its whole life cycle. Moreover, the Natural Step Sustainability Principles formed a conceptual framework for assessing the environmental performance of the case study symbiosis (Paper I). The environmental performance of the case study symbiosis was compared to four counterfactual reference scenarios in which the actors of the symbiosis operated on their own. The research methods used were process-based life cycle assessment (LCA) (Papers II and III) and hybrid LCA, which combines both process and input-output LCA (Paper IV). The results showed that the environmental impacts caused by the extraction and processing of the materials and the energy used by the symbiosis were considerable. If only the direct emissions and resource use of the symbiosis had been considered, less than half of the total environmental impacts of the system would have been taken into account. When the results were compared with the counterfactual reference scenarios, the net environmental impacts of the symbiosis were smaller than those of the reference scenarios. The reduction in environmental impacts was mainly due to changes in the way energy was produced. However, the results are sensitive to the way the reference scenarios are defined. LCA is a useful tool for assessing the overall environmental performance of industrial symbioses. It is recommended that in addition to the direct effects, the upstream impacts should be taken into account as well when assessing the environmental performance of industrial symbioses. Industrial symbiosis should be seen as part of the process of improving the environmental performance of a system. In some cases, it may be more efficient, from an environmental point of view, to focus on supply chain management instead.  

Thermodynamic modeling to analyse composition of carbonaceous coatings of MnO and other oxides of manganese grown by MOCVD

Equilibrium thermodynamic analysis has been applied to the low-pressure MOCVD process using manganese acetylacetonate as the precursor. ``CVD phase stability diagrams'' have been constructed separately for the processes carried out in argon and oxygen ambient, depicting the compositions of the resulting films as functions of CVD parameters. For the process conduced in argon ambient, the analysis predicts the simultaneous deposition of MnO and elemental carbon in 1: 3 molar proportion, over a range of temperatures. The analysis predicts also that, if CVD is carried out in oxygen ambient, even a very low flow of oxygen leads to the complete absence of carbon in the film deposited oxygen, with greater oxygen flow resulting in the simultaneous deposition of two different manganese oxides under certain conditions. The results of thermodynamic modeling have been verified quantitatively for low-pressure CVD conducted in argon ambient. Indeed, the large excess of carbon in the deposit is found to constitute a MnO/C nanocomposite, the associated cauliflower-like morphology making it a promising candidate for electrode material in supercapacitors. CVD carried out in oxygen flow, under specific conditions, leads to the deposition of more than one manganese oxide, as expected from thermodynamic analysis ( and forming an oxide-oxide nanocomposite). These results together demonstrate that thermodynamic analysis of the MOCVD process can be employed to synthesize thin films in a predictive manner, thus avoiding the inefficient trial-and-error method usually associated with MOCVD process development. The prospect of developing thin films of novel compositions and characteristics in a predictive manner, through the appropriate choice of CVD precursors and process conditions, emerges from the present work.

Spin State Selective Excitation of Single Quantum Transitions Using Multiple Quantum Spectroscopy- an Aid to Analyse Complex Proton NMR spectra of Oriented Molecules

NMR spectra of molecules oriented in liquid-crystalline matrix provide information on the structure and orientation of the molecules. Thermotropic liquid crystals used as an orienting media result in the spectra of spins that are generally strongly coupled. The number of allowed transitions increases rapidly with the increase in the number of interacting spins. Furthermore, the number of single quantum transitions required for analysis is highly redundant. In the present study, we have demonstrated that it is possible to separate the subspectra of a homonuclear dipolar coupled spin system on the basis of the spin states of the coupled heteronuclei by multiple quantum (MQ)−single quantum (SQ) correlation experiments. This significantly reduces the number of redundant transitions, thereby simplifying the analysis of the complex spectrum. The methodology has been demonstrated on the doubly 13C labeled acetonitrile aligned in the liquid-crystal matrix and has been applied to analyze the complex spectrum of an oriented six spin system.

A new method to analyse the Peierls-Nabarro model of an edge dislocation in a rectangular plate

A new method is presented here to analyse the Peierls-Nabarro model of an edge dislocation in a rectangular plate. The analysis is based on the superposition scheme and series expansions of complex potentials. The stress field and dislocation density field on the slip plane can be expressed as the first and the second Chebyshev polynomial series respectively. Two sets of governing equations are obtained on the slip plane and outer boundary of the rectangular plate respectively. Three numerical methods are used to solve the governing equations.

Los determinantes de la rentabilidad primaria de los bonos de titulización hipotecaria: la influencia de las estructuras multitramo

[ES] Este artículo analiza los determinantes de la rentabilidad primaria de los bonos de titulización hipotecaria (conocidos en la literatura como mortgage backed securities, o MBS) emitidos en España durante el periodo 1993-2011, periodo en el que el mercado español llegó a convertirse en el más importante de Europa continental. Los resultados obtenidos sobre el análisis de la población completa de MBS emitidos (262 tramos configurados sobre 94 fondos de titulización) indican que la estructuración multitramo de los MBS ha ayudado a reducir el riesgo percibido global de las emisiones de MBS, mediante la generación de mercados más completos y la reducción de los problemas derivados de la existencia de asimetrías informativas implícitas en el proceso de selección de los activos transmitidos por parte de la entidad cedente. Esta reducción del riesgo percibido ha tenido un efecto directo sobre la rentabilidad ofrecida por los bonos de titulización emitidos. Además, no se encuentran evidencias de que la emisión de MBS persiga la transmisión efectiva de riesgos, más bien al contrario. Las Entidades de crédito, por lo general, han retenido los tramos de primeras pérdidas, lo que ha contribuido a mantener en niveles muy bajos (por debajo de la rentabilidad de la deuda soberana) la rentabilidad ofrecida por los MBS. Precisamente, el escaso diferencial ofrecido por los bonos de titulización se debe a que los tramos retenidos no han ofrecido primas de rentabilidad ajustadas al riesgo inherente.

Analyse der Beifangreduktion durch Gitternetze in der kommerziellen Garnelenfischerei

Trials for the determination of the magnitude of bycatch reduction by sorting grids used in the commercial brown shrimp fishery were carried out from September to December 1997. Trawls with 9 m beam length were used on different fishing grounds in the estuary of the Elbe River near Cuxhaven. The sorting grids tested were made of stainless steel bars spaced at 18, 20, 22, 26 and 30 mm, built into a cylindrical stainless steel frame with a diameter of 65 cm at an angle of attack of 45 degrees. This frame was positioned between the forenet and codend. Simultaneous hauls were made with a trawl of equal construction but without a sorting grid, and the weighed catch components (fish, discard shrimps and commercial size shrimps) separated by means of a riddle were compared. The composition of the sorted out part of the catch of the sorting grid net could be calculated by comparise the corresponding catch components in both the standard trawl and the sorting grid trawl. According to this the total catch of the beam trawl with the sorting grid is reduced by 18 to 38 % depending on the space between the bars. 7 to 31 % of the sorted out part of the catch consists of fish. The use of the sorting grid, however, also leads to losses of 4 to 12 % in Oktober. Per hour of towing this means a loss of 10,3 % commerical size shrimps with a sorting grid of 18 mm space between the bars and of 12,4 % for a 26 mm grid.

Analyse der Beifangreduktion durch Trichternetze in der kommerziellen Garnelenfischerei

Trials for the determination of the magnitude of bycatch reduction by the sievenets used in the commercial brown shrimp fishery were carried out from September to December 1997. Trawls with 9 m beam length were the subjected to the investigation. They were used on different fishing grounds in the estuary of the Elbe near Cuxhaven. Sievenets with 50, 60 and 80 mm mesh opening were tested in 29 hauls and 31.6 h total duration. A trawl of equal construction without sievenets fished synchronously was used for comparison. The proportional catch composition in the codend was determined by weighing the catch components (fish, discard shrimps and commercial size shrimps) as separated by means of a riddle. The composition of the sorted out part of the catch could be calculated by comparison of the corresponding catch components both in standard trawl and sievenettrawl. According to this the total catch of a beam trawl with sievenet is diminished by 9 to 34 % depending on the mesh opening of the sievenet. 32 to 58 % of the sorted out part of the catch consists of fish. Use of a sievenet, however, also leads to a loss of 6 to 15 % of commercial size shrimps. Per hour of towing this means a loss of 8.7 kg commercial size shrimps with a sievenet of 60 mm mesh opening and of 1.8 kg for a mesh size of 80 mm.

Differenzierung roher und geräucherter Aale durch Protein- und DNA-Analyse

Raw or smoked eel was analysed by isoelectric focusing of sarcoplasmic proteins. For raw fish specific protein patterns were obtained for A. anguilla/A. rostrata, A. japonica and A. australis, but in case of smoked fish differentiation was only possible between Atlantic and Pacific species. Differentiation of raw or smoked eel was possible by PCR-SSCP, but patterns of ssDNA showed some intra-specific variability depending on the type of amplicon.

Fischartbestimmung von Caviar durch Protein- und DNA-Analyse

Deutscher Caviar, made from roe of lumpfish or capelin, gives species specific patterns in protein electrophoresis. The same techniques can be used to differentiate caviar from salmon and trout. The differentiation of sturgeon caviar (beluga, osietra, sevruga) is possible by isoelectric focusing, but not by SDS-PAGE. PCR-based methods of DNA-analysis for identification of the origin of sturgeon caviar are under development.

Analyse des Fluchtverhaltens von Fischen auf Schiffsgeräusche mit hydroakustischen Methoden

Investigations on the avoidance reactions of pelagic schooling fish (herring and sprat) released by an approaching fishery vessel were carried out during the 378th cruise of FRC "Solea" from 25 September to 3 October 1995 in the Arkona Sea, southern Baltic. An echosounder system EK 500/BI500 with a 38 kHz transducer mounted on a towed body as weIl as a 120 kHz hull mounted transducer were used. Fish densities were measured synchronously as well as under the ship as at a laterally distances from the ship by the transducer of the towed body. By these means the variation of fish densities up to a certain distance from the ship is possible. The advantage of using an echo integrating system for these measurements is, that it works also for not schooling fish and under conditions where schooling fish disperse (e.g. at night).

Differenzierung von Pangasius (Pangasius hypophthalmus) und Asiatischem Rotflossenwels (Hemibagrus wyckioides) durch Protein- und DNA-Analyse

In the last years farmed Pangasius (Tra-Pangasius, Pangasius hypophthalmus) from Vietnam has reached a considerable market share, whereas aquaculture of Asian Redtail Catfish (Hemibagrus wyckioides) is in its infancy. Recently it has been detected by food control authorities in Hamburg, that Pangasius fillets have been mislabelled and sold as fillets produced from Asian Redtail catfish. The necessity to improve the analytical methods for differentiation of Pangasius and Redtail Catfish prompted us to evaluate the suitability of isoelectric focusing (IEF) and DNA-analysis for identification of the two species. IEF of water soluble proteins was found to be a fast, reliable and economical method for differentiation of raw fillets of Pangasius and Redtail Catfish, as long as reference material is available. PCR-based DNA analysis was performed as follows: (i) amplification of a 464 bp segment of the cytochrome b gene; (ii) sequencing of the PCR product; (iii) comparison of the sequence with entries in GenBank using BLAST. The sequences of both species differed considerably, allowing the unequivocal differentiation between P. hypophthalmus and H. wyckioides. Kurzfassung Pangasius (Schlankwels, Tra-Pangasius, Pangasius hypophthalmus) hat sich innerhalb weniger Jahre zu einem bedeutenden Zuchtfisch entwickelt, während die Aquakultur des Asiatischen Rotflossenwelses (Hemibagrus wyckioides) in Vietnam noch in einem relativ kleinen Maßstab stattfindet. Kürzlich wurde von der Lebensmittelüberwachung in Hamburg nachgewiesen, dass im Handel erhältliche Filets mit der Deklaration „Rotflossenwels“ aus Pangasius hergestellt worden waren. Vor diesem Hintergrund wurden zwei Methoden auf ihre Eignung zur Differenzierung von Pangasius und Rotflossenwels geprüft. Es zeigte sich, dass sowohl die isoelektrische Fokussierung (IEF) wasserlöslicher Proteine als auch die PCR-basierte DNA-Analyse zur Unterscheidung beider Arten gut geeignet ist. Die IEF stellt eine schnelle und kostengünstige Untersuchungsmethode dar, die allerdings Referenzmaterial benötigt. Mit Hilfe der PCR (Polymerase-Kettenreaktion) wurde ein Abschnitt des Cytochrom b-Gens vervielfältigt und sequenziert. Die Sequenzen von P. hypophthalmus und H. wyckioides wiesen beträchtliche Unterschiede auf. Es wird diskutiert, wie sich durch Vergleich dieser Sequenzen mit Einträgen in Gendatenbanken unbekannte Proben beider Arten sicher zuordnen lassen.