O processo de descentralização da gestão orçamentária nos núcleos regionais da Agência Nacional de Saúde Suplementar: um estudo de caso

O presente estudo teve como objetivo analisar como se deu a descentralização da gestão orçamentária na Agência Nacional de Saúde Suplementar em suas Coordenadorias de Brasília e São Paulo e em que medida é possível replicá-la aos demais Núcleos Regionais espalhados em todo território nacional. Para tanto, apoiou-se em um conjunto de dados/evidências levantados a partir da revisão da literatura, pesquisa documental e pesquisa de campo envolvendo observação participante e aplicação de entrevistas e questionários. Como estratégia de pesquisa foi utilizado o estudo de caso, visto tratar-se da análise de uma intervenção em uma organização, no caso a Agência Nacional de Saúde Suplementar, com o intuito de esclarecer como e por que as decisões foram implementadas e com quais resultados. Para a compreensão do fenômeno estudado, necessitou-se explorar os conceitos da descentralização, compreender as especificidades que afetam o grau de descentralização, investigar a experiência acumulada nos Núcleos que possuem Coordenadorias de Administração Descentralizada e identificar a viabilidade de instalação de CADs nos demais Núcleos. A despeito dos problemas observados e relatados na implementação do processo, é visível os ganhos obtidos com a descentralização, tanto na percepção dos gestores envolvidos quanto dos servidores das unidades descentralizadas. A análise documental também comprovou que ganhos de eficiência e gestão foram obtidos nessas unidades, mas correções devem ser realizadas. Mediante a análise dos dados apresentados, verifica-se que a descentralização das demais unidades é possível, e resolveria alguns dos problemas relatados pelos servidores, criando uma gestão mais participativa que se adeque as especificidades locais, mas a replicação desse modelo aos demais núcleos passa primeiramente por uma efetiva avaliação e ajustes das unidades já implantadas.

A indústria petrolífera nacional e potiguar: uma análise a partir da tecnologia em E&P

O trabalho analisa a Indústria Petrolífera em três ambientes de atuação, mundial, nacional e estadual, a partir da observação de sete variáveis, a saber: caráter do petróleo; risco; economia de escala; integração; barreiras; tecnologia e ambiente. O estudo busca perceber as interações e os transbordamentos das variáveis selecionadas em cada um dos ambientes citados, em razão os aspectos econômicos e institucionais presentes nesta atividade, cujos resultados atingem diversos setores da economia e da sociedade como um todo e balizam o próprio processo de inovação da mesma. O estudo está alicerçado no arcabouço teórico neoschumpeteriano acerca dos aspectos voltados para concorrência e inovação, além da questão institucional, e se apóia em dados da Agência Nacional do Petróleo (A.N.P.), Ministério de Minas e Energia (MME), Movimento de Combate à Corrupção Eleitoral / Tribunal Superior Eleitoral (MCCE/TSE), Organization of the Petroleum Exporting Countries (OPEC), International Energy Agency (IAE), Institut Français Pétrole (IFP), United Nations Development Programme (UNDP). Avalia-se que em termos de caracterização da indústria petrolífera nos três ambientes considerados (mundial, nacional e local), há certa similitude no que se refere ao comportamento destas variáveis, com pequenas modificações suscitadas por fatores como grau de desenvolvimento e complexidade da atividade; resultado do ambiente concorrencial e inovativo; e, pelas influências institucionais acerca de atividades e grau de inserção das mesmas no ambiente socioeconômico onde estão localizadas a atividade produtiva e o seu entorno

Fatores de sucesso no desenvolvimento de novos produtos em pequenas empresas: um estudo de caso em um fabricante de equipamentos para gás natural veicular

This study presents itself as a contribution to the solidification of the Natural Gas industry, within the scope of the development of new products. The goal of this paper is to analyze the factors that lead to the success of new products through the evaluation of the activities done during the process of development of these products in the Natural Gas sector. To achieve this goal a case study was done in a small company of this segment. At first, as a basis for the study, a bibliographical research was done with books, theses, dissertations, monographies, publications in national and international periodicals, congress annals and publications in the internet related to the subject. Afterwards, a case study was done, aiming at the acquisition of further knowledge about the real process of development of products in a small company of the Natural Gas sector, allowing for the performance of the evaluation. The case study was done at Gas Project and Systems do Brasil, a company that works with the development of electronic equipment to the conversion of car engines to natural gas, through direct observations and interviews with the person responsible for the development and management of products. Through the evaluation of the process it was observed that the activities related to it are done in an informal way and some activities are considered unnecessary for their success. The results also suggest an emphasis in the technological activities, something that was not observed in the activities related to the market. The instruments used in this evaluation prove to be efficient to evaluate the process of development of new products in other companies, including those of different areas. Taking into account the relevance of the studied theme to the strengthening of the Natural Gas industry, it is necessary to do further complementary studies

Critérios na tomada de decisão estratégica em projetos de co-geração a gás natural: um estudo em hospitais

This thesis deals with analyzing the actual perception of the brazilian hospital managers about natural gas fired cogeneration. An study of case is developed to obtain information about the viability of the investments in cogeneration technolgies in four hospitals. These studies are made using a questionnaire, to know and to obtain necessaries data of the managers. The main results shows that the investors have a bad feeling about to invest in a different activity. In other hand, the results show that the investors have a good impression about the configuration of the project that uses the project finance like way of financing

Software inteligente embarcado aplicado à correção de erro na medição de vazão em gás natural

This study developed software rotines, in a system made basically from a processor board producer of signs and supervisory, wich main function was correcting the information measured by a turbine gas meter. This correction is based on the use of an intelligent algorithm formed by an artificial neural net. The rotines were implemented in the habitat of the supervisory as well as in the habitat of the DSP and have three main itens: processing, communication and supervision

Produção de grês porcelanato a partir de matérias-primas do Rio Grande do Norte e queima a gás natural

The State of Rio Grande do Norte, Brazil, possess major deposits of feldspar, clay, kaolin and talc, all raw materials used in the production of porcelainized stoneware tiles. Conversely, state industries manufacture only low added value red ceramics. Porcelainized stoneware tiles is one of the noblest ceramics, depicting low water absorption (typically below of 0,5%), in addition to excellent staining resistance and mechanical strength. The present work aims at investigating the potential of local raw materials for the production of porcelainized stoneware tiles. To that end, these materials were characterized by X-ray fluorescence, X-ray diffraction, particle size analysis, thermal gravimetric analysis and thermal differential analysis. Admixtures containing different compositions were prepared and fired at three temperatures, 1150, 1200 and 1250°C for 30 min. After firing, tests samples were characterized by water absorption tests, linear retraction, dilatometric analysis, apparent porosity, apparent specific mass, flexural strength, and microstructural analysis by XRD and SEM. The results revealed that ceramics with porcelainized stoneware tiles characteristics could be produced from raw materials originated in the State of Rio Grande do Norte

Produção de biodiesel a partir de óleo de coco (Cocos nucifera L

The production of biodiesel has become an important and attractive process for the production of alternative fuels. This work presents a study of the biodiesel production from coconut oil (Cocos nucifera L.), by two routes: direct transesterification using NaOH as catalyst and esterification (with H2SO4) followed by basic transesterification. The reactor was built in pirex with 1L of capacity and was equipped with a jacket coupled with a thermostatic bath to temperature control, a mecanical stirring is also present in the reactor. The analysis of oil composition was carried out by gas chromatography and esters compounds were identified. The parameters of molar ratio oil/alcohol, reaction time and temperature were studied and their influence on the conversion products was evaluated using experimental planning (23). The molar ratio was the most significant variable by the statistical planning analysis. Conversions up to 85.3% where achived in the esterification/transesterification, with molar ratio 1:6 at 60ºC and 90 minutes of reaction. For the direct transesterification, route conversions up 87.4% eas obtained using 1:6.5 molar ratio at 80ºC and 60 minutes of reaction. The Coconut oil was characterized by their physic chemical properties and key constituents of the oil. The lauric acid was the main constituint and the oil showed high acidity. The biodiesel produced was characterized by its main physicochemical properties, indicating satisfactory results when compared to standard values of National Petroleum Agency. The work was supplemented with a preliminary assessment of the reaction kinetic

Inferência do ponto de orvalho em amostras de gás natural processado

This dissertation aims to assess the representativeness of the manual chilled mirror analyzer (model II Chanscope 13-1200-CN-2) used for the determination of condensed hydrocarbons of natural gas compared to the indirect methods, based on thermodynamic models equation of state. Additionally, it has been implemented in this study a model for calculating the dew point of natural gas. The proposed model is a modification of the equation of state of Peng-Robinson admits that the groups contribution as a strategy to calculate the binary interaction parameters kij (T) temperature dependence. Experimental data of the work of Brown et al. (2007) were used to compare the responses of the dew point of natural gas with thermodynamic models contained in the UniSim process simulator and the methodology implemented in this study. Then two natural gas compositions were studied, the first being a standard gas mixture gravimetrically synthesized and, second, a mixture of processed natural gas. These experimental data were also compared with the results presented by UniSim process simulator and the thermodynamic model implemented. However, data from the manual analysis results indicated significant differences in temperature, these differences were attributed to the formation of dew point of water, as we observed the appearance of moisture on the mirror surface cooling equipment

Balanço energético de um forno túnel de cerâmica estrutural convertido de lenha para gás natural

In energy systems, the balance of entrances, exits and losses are fundamental to rationalize the energy consumption, independently of the source (sun, natural gas, wind, water, firewood or oil). This estimate is important so much in the phase of project of the facilities, as in the exploration or operation. In the project phase it indicates the energy needs of the process and the contribution of the energy in the cost of the product and the capacity of storage of the fuel and in the operation phase it allows to evaluate the use of the energy in the process of it burns, showing the weak points that should suffer intervention to improve the efficiency. With this tool, it can be implemented routines of calculation of thermal balances in ovens of it burns of structural ceramic, in way to generate an optimized mathematical model for application in the current and promising structural ceramic brazilian industry. The ceramic oven in study is located in the metropolitan area of Natal (Rio Grande do Norte) and it is a continuous oven of the type wagons tunnel, converted of firewood for natural gas and it produces blocks of red ceramic. The energy balance was applied in the oven tunnel before and after the conversion and made the comparisons of the energy efficiencies (it burns to the firewood and it burns to natural gas), what showed that the gaseous fuel is more efficient when we burn structural ceramic in ovens tunnels. When we burn natural gas, the requested energy is smaller and better used. Tests were accomplished in the burned product that showed the best quality of the burned brick with natural gas. That quality improvement makes possible to accomplish new interventions for the most rational use of the energy in the oven tunnel of the Ceramic in study and in the industries of structural ceramic of the whole Brazil, that need control tools of burning and of quality

Estudo de uma coluna de absorção recheada para desidratação do gás natural utilizando microemulsão como absorvente

During natural gas processing, water removal is considered as a fundamental step in that combination of hydrocarbons and water favors the formation of hydrates. The gas produced in the Potiguar Basin (Brazil) presents high water content (approximately 15000 ppm) and its dehydration is achieved via absorption and adsorption operations. This process is carried out at the Gas Treatment Unit (GTU) in Guamaré (GMR), in the State of Rio Grande do Norte. However, it is a costly process, which does not provide satisfactory results when water contents as low as 0.5 ppm are required as the exit of the GTU. In view of this, microemulsions research is regarded as an alternative to natural gas dehydration activities. Microemulsions can be used as desiccant fluids because of their unique proprieties, namely solubilization enhancement, reduction in interfacial tensions and large interfacial area between continuous and dispersed phases. These are actually important parameters to ensure the efficiency of an absorption column. In this work, the formulation of the desiccant fluid was determined via phases diagram construction, employing there nonionic surfactants (RDG 60, UNTL L60 and AMD 60) and a nonpolar fluid provided by Petrobras GMR (Brazil) typically comprising low-molecular weight liquid hydrocarbons ( a solvent commonly know as aguarrás ). From the array of phases diagrams built, four representative formulations have been selected for providing better results: 30% RDG 60-70% aguarrás; 15% RDG 60-15% AMD 60-70% aguarrás, 30% UNTL L60-70% aguarrás, 15% UNTL L60-15% AMD 60-70% aguarrás. Since commercial natural gas is already processed, and therefore dehydrated, it was necessary to moister some sample prior to all assays. It was then allowed to cool down to 13ºC and interacted with wet 8-12 mesh 4A molecular sieve, thus enabling the generation of gas samples with water content (approximately 15000 ppm). The determination of the equilibrium curves was performed based on the dynamic method, which stagnated liquid phase and gas phase at a flow rate of 200 mL min-1. The hydrodynamic study was done with the aim of established the pressure drop and dynamic liquid hold-up. This investigation allowed are to set the working flow rates at 840 mL min-1 for the gas phase and 600 mLmin-1 for the liquid phase. The mass transfer study indicated that the system formed by UNTL L60- turpentine-natural gas the highest value of NUT

Avaliação da estabilidade térmica e oxidativa dos biodieseis de algodão, girassol, dendê e sebo bovino

The search for new sources of environmentally friendly energy is growing every day. Among these alternative energies, biodiesel is a biofuel that has had prominence in world production. In Brazil, law 11.097, determine that all diesel sold in the country must be made by mixing diesel/biodiesel. The latter called BX, , where X represents the percent volume of biodiesel in the diesel oil, as specified by the ANP. In order to guarantee the quality of biodiesel and its mixtures, the main properties which should be controlled are the thermal and oxidative stability. These properties depend mainly of the chemical composition on the raw materials used to prepare the biodiesel. This dissertation aims to study the overall thermal and oxidative stability of biodiesel derived from cotton seed oil, sunflower oil, palm oil and beef tallow, as well as analyze the properties of the blends made from mineral oil and biodiesel in proportion B10. The main physical-chemical properties of oils and animal fat, their respective B100 and blends were determined. The samples were characterized by infrared and gas chromatography (GC). The study of thermal and oxidative stability were performed by thermogravimetry (TG), pressure differential scanning calorimeter (PDSC) and Rancimat. The obtained biodiesel samples are within the specifications established by ANP Resolution number 7/2008. In addition, all the blends and mineral diesel analyzed presented in conformed withthe ANP Regularion specifications number 15/2006. The obtained results from TG curves data indicated that the cotton biodiesel is the more stable combustible. In the kinetic study, we obtained the following order of apparent activation energy for the samples: biodiesel from palm oil > sunflower biodiesel > tallow biodiesel > cotton biodiesel. In terms of the oxidative stability, the two methods studied showed that biodiesel from palm oil is more stable then the tallow. Within the B100 samples studied only the latter were tound to be within the standard required by ANP resolution N° 7. Testing was carried out according to the EN14112. This higher stability its chemical composition

Uma abordagem através de algoritmos transgenéticos para o problema da configuração do traçado de uma rede de distribuição de gás natural

Este trabalho apresenta um algoritmo transgenético híbrido para a solução de um Problema de Configuração de uma Rede de Distribuição de Gás Natural. O problema da configuração dessas redes requer a definição de um traçado por onde os dutos devem ser colocados para atender aos clientes. É estudada neste trabalho uma maneira de conectar os clientes em uma rede com arquitetura em forma de árvore. O objetivo é minimizar o custo de construção da rede, mesmo que para isso alguns clientes que não proporcionam lucros deixem de ser atendidos. Esse problema pode ser formulado computacionalmente através do Problema de Steiner com Prêmios. Este é um problema de otimização combinatória da classe dos NPÁrduos. Este trabalho apresenta um algoritmo heurístico para a solução do problema. A abordagem utilizada é chamada de Algoritmos Transgenéticos, que se enquadram na categoria dos algoritmos evolucionários. Para a geração de soluções inicias é utilizado um algoritmo primaldual, e pathrelinking é usado como intensificador

A cadeia produtiva de gás natural no Rio Grande do Norte e perspectivas para o setor

The paper demonstrates how it is organized production chain of natural gas in Rio Grande do Norte and highlights some prospects for this sector. The study is backed by elements to understand the process of innovation as the driving force of capitalist dynamics as well as the features of the Brazilian economy in the years 1990 and 2000 that indicated the development of natural gas production in the energy matrix Brazil. It was found that the state has potiguar possibilities for structuring an energy based on elements from the region and with prospects of becoming self-sufficient in electricity, where natural gas has a share of participation in this segment. The automotive and industrial are the biggest consumers of this input. With emphasis on the textile industry. Signaling to a broad horizon of supply, this sector will depend on their investments in research and Deficient, and the policy adopted by government to develop the consumer market

Avaliação energética de um sistema de refrigeração por absorção utilizando gás de aterro e gás natural

The current technological development made by the absorption refrigeration system is an economic and ambient alternative in comparison to the vapor cycle, possessing an advantage that uses thermal energy that is less noble. Chillers of absorption are used widely in the air conditioned industries, because they can be set in motion through hot water vapors that burn natural gas, solar energy, biomasses amongst others instead of electricity. These systems allow it to reduce the tips of electric demand and balance the rocking of energy demand. This work has had a main objective to simulate a absorption refrigeration cycle with lithium-water bromide solution using biogas of sanitary landfill, and mixtures of this with natural gas. These results shown to the energy viability of the system burning biogas and its mixtures with natural gas in the generator, when compared with equipments that uses traditional fuels (natural gas, oil diesel, amongst others), for operation the commercial chillers with 15 kW of the refrigeration capacity and temperature of the water in the entrance of 14°C and the exit of 7°C.

Análise termodinâmica e termoeconômica do aproveitamento do gás natural em sistemas de cogeração de energia de usinas de açúcar e álcool

Pós-graduação em Engenharia Mecânica - FEIS