Jamming for a 2D granular material

This paper focuses on the nature of jamming, as seen in two-dimensional frictional granular systems consisting of photoelastic particles. The photoelastic technique is unique at this time, in its capability to provide detailed particle-scale information on forces and kinematic quantities such as particle displacements and rotations. These experiments first explore isotropic stress states near point J through measurements of the mean contact number per particle, Z, and the pressure, P as functions of the packing fraction, . In this case, the experiments show some but not all aspects of jamming, as expected on the basis of simulations and models that typically assume conservative, hence frictionless, forces between particles. Specifically, there is a rapid growth in Z, at a reasonable which we identify with as c. It is possible to fit Z and P, to power law expressions in - c above c, and to obtain exponents that are in agreement with simulations and models. However, the experiments differ from theory on several points, as typified by the rounding that is observed in Z and P near c. The application of shear to these same 2D granular systems leads to phenomena that are qualitatively different from the standard picture of jamming. In particular, there is a range of packing fractions below c, where the application of shear strain at constant leads to jammed stress-anisotropic states, i.e. they have a non-zero shear stress, τ. The application of shear strain to an initially isotropically compressed (hence jammed) state, does not lead to an unjammed state per se. Rather, shear strain at constant first leads to an increase of both τ and P. Additional strain leads to a succession of jammed states interspersed with relatively localized failures of the force network leading to other stress-anisotropic states that are jammed at typically somewhat lower stress. The locus of jammed states requires a state space that involves not only and τ, but also P. P, τ, and Z are all hysteretic functions of shear strain for fixed . However, we find that both P and τ are roughly linear functions of Z for strains large enough to jam the system. This implies that these shear-jammed states satisfy a Coulomb like-relation, τ = μP. © 2010 The Royal Society of Chemistry.

Comparative performances of birnessite and cryptomelane MnO as electrode material in neutral aqueous lithium salt for supercapacitor application

Na-doped Birnessite-type manganese oxide (d-MnO) has been synthesized using the chemical method and characterized through X-ray diffraction and SEM, showing the lamellar structure and high crystal structure. A comparative study of the electrochemical performances of this material with those of the commercial Cryptomelane-type MnO has then been undertaken in ten neutral aqueous electrolytes for supercapacitor applications. Aqueous electrolytes, containing a lithium salt, LiX (where X = SO , NO, CHCO , CHSO, ClO , CHCO, TFSI, Beti, BOB, or Lact), have been first prepared under neutral pH conditions to reach the salt concentration, providing the maximum in conductivity. Their transport properties are then investigated through conductivities, viscosities, and self-diffusion coefficient measurements. Second, the thermal behaviors of these electrolytic aqueous solutions are then evaluated by using a differential scanning calorimeter from (213.15 to 473.15) K in order to access their liquid range temperatures. Cyclic voltammograms (CV) in three electrode configurations are thereafter investigated using Na Birnessite and Cryptomelane as working electrode material from (-0.05 to 1.5) V versus Ag/AgCl at various sweep rates from (2 to 100) mV·s. According to anion nature/structure and manganese oxide material type, different CV responses are observed, presenting a pure capacitive profile for Beti or CH CO and an additional pseudocapacitive signal for the smallest anions, such as ClO and NO . The capacitances, energies, and efficiencies are finally calculated. These results indicate clearly that electrolytes based on a mineral lithium salt under neutral pH condition and high salt concentration (up to 5 mol·L) have better electrochemical performances than organic ones, up to 1.4 V with good material stability and capacity retention. The relationship between transport properties, electrostatic and steric hindrance considerations of hydrated ions, and their electrochemical performances is discussed in order to understand further the lithium intercalation-deintercalation processes in the lamellar or tunnel structure of investigated MnO. © 2013 American Chemical Society.

Additional Return for Ordnance Stores for the Use of Capt. Thos. Biddle’s Compy Corps of Artillery, June 24, 1814

Jacob Hindman (1789-1827) was an American military officer who was a captain of the Second U.S. Artillery during the War of 1812. He commanded troops at the battles at Fort George and Stony Creek in 1813, and in June of that year became the major of the Second Artillery. He remained in this position until May of 1814 when the regiment was merged with the Corps of Artillery. During the Niagara campaign in 1814, Hindman’s company commanders included Nathan Towson, Thomas Biddle, John Ritchie, and Alexander Williams. During the British attack on Fort Erie in August 1814, Hindman led an assault for which he later received a brevet promotion to lieutenant colonel for “gallant conduct in the defense of Fort Erie”. In 1815, he received an additional brevet for “meritorious services”. He is generally regarded as one of the most successful artillerists of the War of 1812. James Hall (1793-1868) served with the U.S. military as a second lieutenant in the Second Artillery during the War of 1812. He fought in the Battle of Lundy’s Lane and was General Brown’s messenger during the attack on Fort Erie. He left the military in 1818 and became a newspaper editor and author. His experiences during the War of 1812 provided material for two stories, The Bearer of Despatches and Empty Pockets. Much of his work sought to popularize the West and promote western authors.

Intertemporal Material Deprivation

Individual well-being is multidimensional and various aspects of the quality of life need to be jointly considered in its measurement. The axiomatic literature on the subject has proposed many indices of multidimensional poverty and deprivation and explored the properties that are at the basis of these measures. The purpose of this chapter is to add intertemporal considerations to the analysis of material deprivation. We employ the EU-SILC panel data set, which includes information on different aspects of well-being over time. EU countries are compared based on measures that take this additional intertemporal information into consideration. Journal of Economic Literature Classi cation No.: D63.

Development of hybrid UV VCSEL with organic active material and dielectric DBR mirrors for medical, sensoric and data storage applications

Lasers play an important role for medical, sensoric and data storage devices. This thesis is focused on design, technology development, fabrication and characterization of hybrid ultraviolet Vertical-Cavity Surface-Emitting Lasers (UV VCSEL) with organic laser-active material and inorganic distributed Bragg reflectors (DBR). Multilayer structures with different layer thicknesses, refractive indices and absorption coefficients of the inorganic materials were studied using theoretical model calculations. During the simulations the structure parameters such as materials and thicknesses have been varied. This procedure was repeated several times during the design optimization process including also the feedback from technology and characterization. Two types of VCSEL devices were investigated. The first is an index coupled structure consisting of bottom and top DBR dielectric mirrors. In the space in between them is the cavity, which includes active region and defines the spectral gain profile. In this configuration the maximum electrical field is concentrated in the cavity and can destroy the chemical structure of the active material. The second type of laser is a so called complex coupled VCSEL. In this structure the active material is placed not only in the cavity but also in parts of the DBR structure. The simulations show that such a distribution of the active material reduces the required pumping power for reaching lasing threshold. High efficiency is achieved by substituting the dielectric material with high refractive index for the periods closer to the cavity. The inorganic materials for the DBR mirrors have been deposited by Plasma- Enhanced Chemical Vapor Deposition (PECVD) and Dual Ion Beam Sputtering (DIBS) machines. Extended optimizations of the technological processes have been performed. All the processes are carried out in a clean room Class 1 and Class 10000. The optical properties and the thicknesses of the layers are measured in-situ by spectroscopic ellipsometry and spectroscopic reflectometry. The surface roughness is analyzed by atomic force microscopy (AFM) and images of the devices are taken with scanning electron microscope (SEM). The silicon dioxide (SiO2) and silicon nitride (Si3N4) layers deposited by the PECVD machine show defects of the material structure and have higher absorption in the ultra violet range compared to ion beam deposition (IBD). This results in low reflectivity of the DBR mirrors and also reduces the optical properties of the VCSEL devices. However PECVD has the advantage that the stress in the layers can be tuned and compensated, in contrast to IBD at the moment. A sputtering machine Ionsys 1000 produced by Roth&Rau company, is used for the deposition of silicon dioxide (SiO2), silicon nitride (Si3N4), aluminum oxide (Al2O3) and zirconium dioxide (ZrO2). The chamber is equipped with main (sputter) and assisted ion sources. The dielectric materials were optimized by introducing additional oxygen and nitrogen into the chamber. DBR mirrors with different material combinations were deposited. The measured optical properties of the fabricated multilayer structures show an excellent agreement with the results of theoretical model calculations. The layers deposited by puttering show high compressive stress. As an active region a novel organic material with spiro-linked molecules is used. Two different materials have been evaporated by utilizing a dye evaporation machine in the clean room of the department Makromolekulare Chemie und Molekulare Materialien (mmCmm). The Spiro-Octopus-1 organic material has a maximum emission at the wavelength λemission = 395 nm and the Spiro-Pphenal has a maximum emission at the wavelength λemission = 418 nm. Both of them have high refractive index and can be combined with low refractive index materials like silicon dioxide (SiO2). The sputtering method shows excellent optical quality of the deposited materials and high reflection of the multilayer structures. The bottom DBR mirrors for all VCSEL devices were deposited by the DIBS machine, whereas the top DBR mirror deposited either by PECVD or by combination of PECVD and DIBS. The fabricated VCSEL structures were optically pumped by nitrogen laser at wavelength λpumping = 337 nm. The emission was measured by spectrometer. A radiation of the VCSEL structure at wavelength 392 nm and 420 nm is observed.

Gateway additional science for OCR.

Esta dividido en tres secciones: Biología, Química y Física y su contenido completa con material adicional al de otra publicación del mismo título. Cumple con los requisitos exigidos para la obtención del título profesional OCR para mayores de dieciséis años. Cada una de estas secciones se ha ordenado por ítem ó capítulos, con distintos tipos de pruebas de autoevaluación para los alumnos.

Teaching children English as an additional language : a programme for 7-11 years old.

En Inglaterra, en muchas escuelas, dos tercios de los niños de una clase de unos 30 alumnos, sólo hablan inglés en el colegio, utilizando en sus casas su lengua materna. Ante esta situación, el libro presenta un programa de enseñanza en diez semanas orientado a niños de entre 7 y 11 años (Key Stage 2) para los que el inglés es un nuevo idioma, y les ayuda a aprender vocabulario, preguntas y frases básicas útiles en sus rutinas diarias. Con este método los profesores podrán identificar las necesidades individuales de cada niño, enseñar gramática y vocabulario, disponer de material de apoyo para las actividades y evaluar a los alumnos.

Analysis of DNA polymorphism in ancient barley herbarium material: validation of the KASP SNP genotyping platform

The availability of crop specimens archived in herbaria and old seed collections represent valuable resources for the analysis of plant genetic diversity and crop domestication. The ability to extract ancient DNA (aDNA) from such samples has recently allowed molecular genetic investigations to be undertaken in ancient materials. While analyses of aDNA initially focused on the use of markers which occur in multiple copies such as the internal transcribed spacer region (ITS) within ribosomal DNA and those requiring amplification of short DNA regions of variable length such as simple sequence repeats (SSRs), emphasis is now moving towards the genotyping of single nucleotide polymorphisms (SNPs), traditionally undertaken in aDNA by Sanger sequencing. Here, using a panel of barley aDNA samples previously surveyed by Sanger sequencing for putative causative SNPs within the flowering-time gene PPD-H1, we assess the utility of the Kompetitive Allele Specific PCR (KASP) genotyping platform for aDNA analysis. We find KASP to out-perform Sanger sequencing in the genotyping of aDNA samples (78% versus 61% success, respectively), as well as being robust to contamination. The small template size (≥46 bp) and one-step, closed-tube amplification/genotyping process make this platform ideally suited to the genotypic analysis of aDNA, a process which is often hampered by template DNA degradation and sample cross-contamination. Such attributes, as well as its flexibility of use and relatively low cost, make KASP particularly relevant to the genetic analysis of aDNA samples. Furthermore, KASP provides a common platform for the genotyping and analysis of corresponding SNPs in ancient, landrace and modern plant materials. The extended haplotype analysis of PPD-H1 undertaken here (allelic variation at which is thought to be important for the spread of domestication and local adaptation) provides further resolution to the previously identified geographic cline of flowering-time allele distribution, illustrating how KASP can be used to aid genetic analyses of aDNA from plant species. We further demonstrate the utility of KASP by genotyping ten additional genetic markers diagnostic for morphological traits in barley, shedding light on the phenotypic traits, alleles and allele combinations present in these unviable ancient specimens, as well as their geographic distributions.

Possibilities to include in numerical simulation stochastic and discontinuous phenomena occurring in material

Simulation of materials processing has to face new difficulties regarding proper description of various discontinuous and stochastic phenomena occurring in materials. Commonly used rheological models based on differential equations treat material as continuum and are unable to describe properly several important phenomena. That is the reason for ongoing search for alternative models, which can account for non-continuous structure of the materials and for the fact, that various phenomena in the materials occur in different scales from nano to mezo. Accounting for the stochastic character of some phenomena is an additional challenge. One of the solutions may be the coupled Cellular Automata (CA) – Finite Element (FE) multi scale model. A detailed discussion about the advantages given by the developed multi scale CAFE model for strain localization phenomena in contrast to capabilities provided by the conventional FE approaches is a subject of this work. Results obtained from the CAFE model are supported by the experimental observations showing influence of many discontinuities existing in the real material on macroscopic response. An immense capabilities of the CAFE approach in comparison to limitations of the FE method for modeling of real material behavior is are shown this work as well.

Additional steps in mechanical recyling of PET

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

NEW PHYTOSEIIDAE (ACARI: MESOSTIGMATA) FROM COSTA RICA, WITH ADDITIONAL INFORMATION on OTHER SPECIES

This paper reports on a study of phytoseiids collected from the La Selva Biological Field Station, the ALAS (Arthropods of La Selva) Project, made available to us by the Canadian National Collection via Dr. E. E. Lindquist. This material includes two new species, Proprioseiopsis versus n. sp. and Transeius costarricensis n. sp., three new records for Central America, and additional information for nine species previously reported from La Selva.

Um estudo sobre custos de elaboração de material didático e tutoria em EaD online em uma Instituição de Ensino Superior no Brasil

This study has as main objective to verify the proportionality of the costs with elaboration of didactic material and costs with tutelage and instruction incurred in a higher education institution, located in national territory, and that offers a degree course in the education area in the modality of EaD online. The purpose of the measurement of this proportionality of the costs was of answering these they are, among other, the relevant costs incurred by the institution research object. This is a research of exploratory stamp whose methodological procedure adopted for your development, in what it refers the collection, analysis of the data and the investigation means, it is the case study, as well as the documental and bibliographical research. The found results indicate that the costs with elaboration of didactic material and the costs with tutelage and instruction are relevant, however they are not the only ones considered as such. The costs involved with acquisition and operation of specific softwares they also constitute an relevant costs. The structure of the costs can be altered in agreement with the analyzed period and in agreement with the characteristics of synchronism of the offered course. It was also verified that the technology used in this education modality it ends up generating additional costs incurred with professionals of specific knowledge in technology

Nocardiosis: an overview and additional report of 28 cases in cattle and dogs

A caracterização fenotípica, perfil de sensibilidade aos antimicrobianos e aspectos clínico-epidemiológicos foram avaliados em 28 linhagens de Nocardia isoladas de 19 casos de mastite, oito lesões tegumentares e um caso de pneumonia em cão. Foram utilizados no diagnóstico métodos microbiológicos, bioquímicos, citológicos e microscopia eletrônica de varredura. Nocardia asteroides tipo IV, N. otitidiscaviarum,N. nova (tipo III) e N. farcinica (tipo V) foram isoladas do leite de vacas com mastite, de material de lavado transtraqueal e de lesões cutâneas de cães. Nocardiose mamária bovina foi diagnosticada predominantemente sob a forma clínica, em propriedades com precárias condições de higiene na pré e pós-ordenha, e inadequado procedimento de terapia intramamária. Nocardiose canina foi diagnosticada comumente em animais co-infectados com o vírus da cinomose. Sulfametoxazole/trimetoprim (92,8%), amicacina (92,8%) e ceftiofur (92,8%) foram os antimicrobianos mais efetivos frente às linhagens de Nocardia. Resistência múltipla a três ou mais e cinco ou mais antimicrobianos foram observadas, respectivamente, em dez (35,7%) e três (10,7%) linhagens, notadamente frente à cloxacilina, cefoperazona e ampicilina. A caracterização de espécies (tipo), aspectos clínico-epidemiológicos, diagnóstico, resistência múltipla aos antimicrobianos e reflexos em saúde pública de linhagens de Nocardia isoladas de bovinos e cães no Brasil foram discutidos. Foi destacada a similaridade entre as espécies de Nocardia isoladas de animais e do homem, e a primeira descrição no Brasil de N. otitidiscaviarum na etiologia da mastite bovina.

Efficacy of Air-abrasion Technique and Additional Surface Treatment at Titanium/Resin Cement Interface

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Color stability of resins and nylon as denture base material in beverages

Purpose: Staining of prosthodontic materials may result in patient dissatisfaction and additional expense for replacement. This study aimed to determine the color stability of two heat-cured denture base acrylic (Lucitone 550, Vipi Cril) and one nylon denture base resin (Transflex) after immersion in beverages. Materials and Methods: Forty disks of each resin (20.0-mm diameter, 3.0-mm thick) were prepared and stored in distilled water for 24 hours at 37°C. During that time (T 0), the color of all specimens was spectrophotometrically measured. Each specimen was immersed in coffee, cola, red wine, and distilled water as a means of control. After 15-day (T 1) and 30-day (T 2) periods of immersion, the color of the specimens was measured again. The CIE (Commission Internationale de L' Eclairage) L*a*b* system was used to determine mean ΔE (color changes) values for each material and compared statistically with two-way ANOVA and Bonferroni intervals at 0.95. Results: In ΔET 0T 1 and ΔET 0T 2 the most severe staining was apparent with red wine (p < 0.001), followed by coffee (p < 0.01), when compared to the specimens stored in distilled water. Transflex also showed significant color change after immersion in cola (p < 0.01). In ΔET 1T 2 only red wine promoted significant staining of all resins (p < 0.0001). Conclusion: Chromatic changes were exhibited by specimens immersed in red wine, followed by coffee. For Transflex, cola also promoted color changes. The values of color changes converted to National Bureau of Standard units showed them to be perceivable to the human eye. © 2011 by the American College of Prosthodontists.