Application of acoustic emission technique for bond characterization in FRP-masonry systems

The acoustic emission (AE) technique is used for investigating the interfacial fracture and damage propagation in GFRP-and SRG-strengthened bricks during debonding tests. The bond behavior is investigated through single-lap shear bond tests and the fracture progress during the tests is recorded by means of AE sensors. The fracture progress and active debonding mechanisms are characterized in both specimen types with the aim of AE outputs. Moreover, a clear distinction between the AE outputs of specimens with different failure modes, in both SRG-and GFRP-strengthened specimens, is found which allows characterizing the debonding failure mode based on acoustic emission data.

Underwater acoustic modem with streaming video capabilities

Oceans have shown tremendous importance and impact on our lives. Thus the need for monitoring and protecting the oceans has grown exponentially in recent years. On the other hand, oceans have economical and industrial potential in areas such as pharmaceutical, oil, minerals and biodiversity. This demand is increasing and the need for high data rate and near real-time communications between submerged agents became of paramount importance. Among the needs for underwater communications, streaming video (e.g. for inspecting risers or hydrothermal vents) can be seen as the top challenge, which when solved will make all the other applications possible. Presently, the only reliable approach for underwater video streaming relies on wired connections or tethers (e.g. from ROVs to the surface) which presents severe operational constraints that makes acoustic links together with AUVs and sensor networks strongly appealing. Using new polymer-based acoustic transducers, which in very recent works have shown to have bandwidth and power efficiency much higher than the usual ceramics, this article proposes the development of a reprogrammable acoustic modem for operating in underwater communications with video streaming capabilities. The results have shown a maximum data-rate of 1Mbps with a simple modulation scheme such as OOK, at a distance of 20 m.

Effect of the acoustic impedance in ultrasonic emitter transducers using digital modulations

In an underwater environment it is difficult to implement solutions for wireless communications. The existing technologies using electromagnetic waves or lasers are not very efficient due to the large attenuation in the aquatic environment. Ultrasound reveals a lower attenuation, and thus has been used in underwater long-distance communications. The much slower speed of acoustic propagation in water (about 1500 m/s) compared with that of electromagnetic and optical waves, is another limiting factor for efficient communication and networking. For high data-rates and real-time applications it is necessary to use frequencies in the MHz range, allowing communication distances of hundreds of meters with a delay of milliseconds. To achieve this goal, it is necessary to develop ultrasound transducers able to work at high frequencies and wideband, with suitable responses to digital modulations. This work shows how the acoustic impedance influences the performance of an ultrasonic emitter transducer when digital modulations are used and operating at frequencies between 100 kHz and 1 MHz. The study includes a Finite Element Method (FEM) and a MATLAB/Simulink simulation with an experimental validation to evaluate two types of piezoelectric materials: one based on ceramics (high acoustic impedance) with a resonance design and the other based in polymer (low acoustic impedance) designed to optimize the performance when digital modulations are used. The transducers performance for Binary Amplitude Shift Keying (BASK), On-Off Keying (OOK), Binary Phase Shift Keying (BPSK) and Binary Frequency Shift Keying (BFSK) modulations with a 1 MHz carrier at 125 kbps baud rate are compared.

Cryptic species in Pagamea coriacea sensu lato (Rubiaceae): evidence from morphology, ecology and reproductive behavior in a sympatric context

In this study we explore morphological and ecological variation in sympatric populations of Pagamea coriacea s.l. - a species complex from white-sand vegetation in the Amazon. A total of 147 trees were sampled and monitored at three nearby sites in Central Amazon, Brazil. Multivariate analyses of morphology indicated two distinct groups (A and B), which also differed in bark type, each containing subgroups associated with sexual dimorphism. However, a single hermaphroditic individual was observed within group B. As expected, all pistillate plants produced fruits, but 23% of the staminate plants of group B, and 5% of group A also produced fruits. This variation suggests that the sexual systems of both groups are between dioecy and gynodioecy. There was an overlap in flowering phases between the two groups, but the pattern of floral maturation differed. Ecologically, plants of group B were found in more shaded habitats and over sandstone bedrocks, while group A was prevalent in deeper sandy soils as canopy plants. The significances of morphological and environmental differences were tested by a multivariate analysis of variance, and a canonical discriminant analysis assessed the importance of variables. The coexistence in sympatry of two discrete morphological groups in the P. coriacea s.l., with different habitat preferences and reproductive behaviors, indicates they represent distinct species.

Diet and ecomorphology of Leporinus reticulatus (Characiformes: Anostomidae) from the upper Rio Juruena, MT, Brazil: ontogenetic shifts related to the feeding ecology

The conservation of diverse and well-distributed fish taxa, as the genus Leporinus, relies intrinsically on the knowledge of the ecological attributes of its representatives. Aiming to increase this knowledge, studies on diet and ecomorphology are ideal to provide important information about species ecology. Thus, this study aimed to analyze aspects of feeding ecology of L. reticulatus, from the upper Rio Juruena, Mato Grosso State, Brazil. The diet of specimens in different ontogenetic stages was compared, as well as their teeth morphology and ecomorphological attributes. Leporinus reticulatus presented omnivorous diet, with higher consumption of invertebrates by smaller specimens (younger ones), and gradual introduction of plant items in larger specimens (older ones). The items consumed by the individuals and the ecomorphological attributes indicated that the species is generalist and opportunistic, besides its association with the river bottom, evidencing a benthic feeding behavior. This species presents a gradual ontogenetic modification in teeth shape and mouth positioning, ranging from a terminal mouth with tricuspid teeth, in smaller specimens, to an inferior mouth with spatula shaped teeth with no cusps, in larger specimens.The ecomorphological attributes indicate an increasing swimming efficiency, and ability for performing vertical displacements, along the ontogenetic development, which in addition to the morphological ontogenetic alterations in the buccal apparatus, contributes to a better ability to explore another niches.

Manipulación acustica del orden y dinámica molecular en estructuras mesomorficas de organización lamelar. Acoustic manipulation of molecular order and dynamics in mesomorphic structures of lamellar organization.

El control de propiedades hidrodinámicas capaces de influir en la mecánica de ruptura y poración de sistemas lamelares o membranas es de fundamental interés para diferentes aplicaciones biotecnológicas. Resulta de particular interés la conexión entre los procesos microscópicos relacionados al tipo de moléculas o unidades básicas, el orden determinado en el auto-ensamblado de las mismas y la dinámica local del sistema, con las propiedades físicas que determinan el comportamiento macroscópico bajo estimulación acústica. Resultados logrados recientemente sugieren la existencia de resonancias hidrodinámicas que podrian ser utilizadas para lograr la inestabilidad del sistema a baja potencia acústica. Se realizaran estudios experimentales utilizando principalmente técnicas que combinan resonancia magnética nuclear (RMN) y la sonicación de la muestra. También se realizarán estudios teóricos y simulaciones numéricas que permitan modelar los sistemas bajo estudio. Se propone dar continuidad al desarrollo de una técnica de relaxometría magnética nuclear en la cual se estimula acústicamente a la muestra durante el proceso de relajación magnética nuclear, y continuar la implementación de técnicas de RMN con resolución espacial que permitan complementar los estudios mencionados. Se espera comprender los mecanismos físicos que determinan la estabilidad de fases lamelares, logrando un modelo verificable y consistente que permita relacionar las propiedades mecánicas e hidrodinámicas con las propiedades de orden y dinámica molecular. Asimismo, se espera lograr avances en el desarrollo de las técnicas experimentales involucradas. La importancia del proyecto radica en el enfoque del problema. A diferencia de casi la totalidad de los estudios reportados, nuestro interés se enfoca en mecanismos de interacción entre la membrana y el campo acústico que sean eficientes a baja potencia acústica, en un régimen donde los gradientes térmicos y la cavitación sean despreciables.

Acoustic emission analysis of the effect of a 2D wedge shaped blade on the compact bone cutting process

Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during an operative procedure. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occuring with continued loading. When a material cracks, energy is emitted in the form of Acoustic Emission (AE) signals that spread in all directions, therefore, AE transducers can be used to monitor the occurrence and development of microcracking and crack propagation in cortical bone. In this research, number of AE signals (hits) and related parameters including amplitude, duration and absolute energy (abs-energy) were recorded during the indentation cutting process by a wedge blade on cortical bone specimens. The cutting force was also measured to correlate between load-displacement curves and the output from the AE sensor. The results from experiments show AE signals increase substantially during the loading just prior to fracture between 90% and 100% of maximum fracture load. Furthermore, an amplitude threshold value of 64dB (with approximate abs-energy of 1500 aJ) was established to saparate AE signals associated with microcracking (41 – 64dB) from fracture related signals (65 – 98dB). The results also demonstrated that the complete fracture event which had the highest duration value can be distinguished from other growing macrocracks which did not lead to catastrophic fracture. It was observed that the main crack initiation may be detected by capturing a high amplitude signal at a mean load value of 87% of maximum load and unsteady crack propagation may occur just prior to final fracture event at a mean load value of 96% of maximum load. The author concludes that the AE method is useful in understanding the crack initiation and fracture during the indentation cutting process.

Robust acoustic and semantic modeling in a telephone-based spoken dialog system

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2009

The blennioid fishes of Belize and Honduras, Central America, with comments on their systematics, ecology, and distribution (Blenniidae, Chaenopsidae, Labrisomidae, Tripterygiidae) / David W. Greenfield, Robert Karl Johnson.

n.s. no.8(1981)

Larval life in the leaves: arboreal tadpole types, with special attention to the morphology, ecology, and behavior of the Oophagous Osteopilus brunneus (Hylidae) larva / Michael J. Lannoo, Daniel S. Townsend, Richard J. Wassersug.

n.s. no.38(1987)

A multivariate study of the family molossidae (mammalia, chiroptera) : morphology, ecology, evolution / Patricia Waring Freeman.

n.s. no.7(1981)

Natural history and ecology of Fowler's toad, Bufo woodhousei fowleri (Amphibia: Bufonidae), in the Indiana Dunes National Lakeshore / by Felix Breden.

n.s. no.49(1988)

Ecology of colonizing populations of the figfly Zaprionus indianus (Diptera, Drosophilidae) in Porto Alegre, Southern Brazil

Ecological parameters such as trophic niche overlap and niche breadth were computed from the frequency of all drosophilid species collected in 2001 and 2002, in the urban area of Porto Alegre city, Brazil. Independently of place, drosophilids community composition and components breeding or feeding sites, the highest frequencies of Zaprionus indianus (Gupta, 1970) were obtained during seasons with higher average temperatures, especially during summer. From a total of the 19,146 individuals of Z. indianus sampled, 80% were found in this season. The data of trophic niche breadth suggest a higher opportunism of adult flies in feeding substrate use, but the females are still selective in oviposition substrate choice. For the values of niche overlap, only for some species, did we find any correlation between these and species richness and/or number of resources, and the most of the correlation values considering breeding and feeding sites were positive. The colonization of Z. indianus in Porto Alegre could be leading to adjustments in the survival strategies of the resident species, but it is possible that many species have conditions for coexisting with the invader.