Laser-driven inertial ion focusing

A Hohlraum-like configuration is proposed for realizing a simple compact source for neutrons. A laser pulse enters a tiny thin-shelled hollow-sphere target through a small opening and is self-consistently trapped in the cavity. The electrons in the inner shell-wall region are expelled by the light pressure. The resulting space-charge field compresses the local ions into a thin layer that becomes strongly heated. An inward expansion of ions into the shell cavity then occurs, resulting in the formation at the cavity center of a hot spot of ions at high density and temperature, similar to that in inertial electrostatic confinement.

Avaliação das condições ambientais e de trabalho em salas cirúrgicas e de necropsia - estudos de casos em hospitais públicos e IMLs da região metropolitana do Rio de Janeiro

A qualidade do ar é um importante indicador de saúde ambiental, sendo o seu monitoramento contínuo necessário. Apesar da relevância do tema, há muitos países em que os limites de exposição para agentes biológicos ainda não foram estabelecidos ou foram definidos de forma inadequada, podendo comprometer a qualidade ambiental. Os ambientes hospitalares, assim como as salas de necropsia podem apresentar problemas de contaminação do ar por agentes microbiológicos, necessitando de monitoramento contínuo a fim de evitar a ocorrência de doenças nos trabalhadores e na população em geral. Este estudo realizou a avaliação microbiológica do ar em hospitais públicos e IMLs da região metropolitana do Rio de Janeiro em salas cirúrgicas e de necropsia. A pesquisa exploratória e descritiva baseou-se em levantamento bibliográfico e investigação de campo, através de estudos de casos. Os dados foram obtidos por meio de entrevistas e observação direta nos locais de trabalho, onde foram realizadas as avaliações microbiológicas do ar. As variações em salas cirúrgicas para bactérias e fungos foram respectivamente de 14,99 ufc/m3 88,29 ufc/m3 e de 45,93 ufc/m3 - 742,09 ufc/m3. Já nas salas de necropsia os valores para bactérias e fungos variaram respectivamente de 18,96 ufc/m3 54,9 ufc/m3 e de 144,87 ufc/m3 - 1152,01 ufc/m3. Foram identificados tanto no ambiente cirúrgico como nas salas de necropsia a presença dos seguintes fungos: Aspergillus sp., Neurospora sp., Penicillium sp., Fusarium sp., Cladosporium sp., Curvularia sp., e Trichoderma sp. Já em relação às bactérias foram identificadas as presenças de Staphilococcus sp., Streptococcus sp. e Micrococcus sp. Foram traçadas recomendações para melhoria da qualidade ambiental e do ar. Os resultados indicaram que os valores são elevados quando comparados com as recomendações das normas internacionais. Foram encontrados valores inferiores aos sugeridos pela CP n. 109 da ANVISA. A presença de microrganismos patogênicos sugere adoção de medidas de controle ambiental. O estudo apontou a necessidade urgente do estabelecimento de valores de referência para ambientes hospitalares no Brasil a fim de garantir condições seguras que não venham a comprometer a saúde dos pacientes e profissionais de saúde envolvidos.

Repetition rate stabilization of the SBS Q-switched fiber laser by external injection

Repetition rate fluctuation is one of the main drawbacks of the low-threshold stimulated Brillouin scattering (SBS) Q-switched fiber laser. A method to stabilize the repetition rate is proposed in this paper by injecting a square-wave modulated light. It is measured experimentally that variance of the repetition rate can be improved from similar to 20% to similar to 1% of the period. It is also found that effectiveness of the method depends on modulation frequency and duty cycle of the injection. Its working mechanism is analyzed qualitatively. (C) 2009 Optical Society of America

透过检测中的准直镜精度容限

在干涉检验过程中, 被检元件的面形误差检测精度受到干涉仪系统结构的影响, 从而降低测量结果的可靠性。为了得到较高的检测精度, 必须对检测系统进行分析, 建立测量误差和系统结构的关联度。根据菲涅耳衍射近似理论, 就菲佐干涉仪中的准直镜和标准镜面形误差对透过检测的影响进行了研究。通过对波前相位传递情况的分析, 得出波前误差和系统结构参量的相关性, 去除空腔系统误差, 优化结构参量, 并建立准直镜误差容限表达式。经计算得出, 当被检面形变误差为0.2λ时, 测试误差可以达到0.02λ, 而对准直镜的面形误差要求

Calculations of bond dissociation energies and dipole moments in energetic materials using density-functional methods

We compare the effectiveness of six exchange/correlation functional combinations (Becke/Lee, Yang and Parr; Becke-3/Lee, Yang and Parr; Becke/Perdew-Wang 91; Becke-3/Perdew-Wang 91; Becke/Perdew 86; Becke-3/Perdew 86) for computing C-N, O-O and N-NO2 dissociation energies and dipole moments of five compounds. The studied compounds are hexabydro-1,3,5-trinitro-1,3,5-triazine (RDX), dimethylnitramine, cyanogen, nitromethane and ozone. The Becke-3/Perdew 86 in conjunction with 6-31G

Investigation on upconversion luminescence in Er3+/Yb3+ codoped tellurite glasses and fibers

The upconversion properties of Er3+/Yb3+ codoped tellurite glasses and glass fibers with D-shape cladding under 980 mu excitation were investigated. Intense emission bands centered at 531, 546 and 658 nm corresponding to the transitions Er3+: H-2(11/2) -> I-4(15/2) , S-4(3/2) -> I-4(15/2) and F-4(9/2) -> I-4(15/2), respectively, were observed at room temperature. Compared with that in Er3+/Yb3+ codoped tellurite bulk glass, the upconversion luminescence becomes more efficient in the fiber geometry. The dependence of upconversion intensities on fiber geometry and possible upconversion mechanism are discussed and evaluated. The presented Er3+/Yb3+ codoped tellurite fibers with intense upconversion luminescence can be used as potential host materials for upconversion fiber lasers. (c) 2005 Elsevier B.V. All rights reserved.

电子束蒸发氧化锆薄膜的粗糙度和光散射特性

利用电子束蒸发工艺，以Ag层为衬底，沉积了中心波长为632．8nm的氧化锆（ZrO2）薄膜，膜层厚度在80-480nm范围内变化．研究了不同厚度样品的粗糙度变化规律和表面散射特性．结果发现，随着膜层厚度的逐渐增加．其表面均方根（RMS）粗糙度和总积分散射（TIS）均呈现出先减小后增大的趋势．利用非相关表面粗糙度的散射模型对样品的TIS特性进行了理论计算，所得结果与测量结果相一致．

Temporal and spatial distribution and abundance of flathead sole (Hippoglossoides elassodon) eggs and larvae in the western Gulf of Alaska

Data from ichthyoplankton surveys conducted in 1972 and from 1977 to 1999 (no data were collected in 1980) by the Alaska Fisheries Science Center (NOAA, NMFS) in the western Gulf of Alaska were used to examine the timing of spawning, geographic distribution and abundance, and the vertical distribution of eggs and larvae of flathead sole (Hippoglossoides elassodon). In the western Gulf of Alaska, flathead sole spawning began in early April and peaked from early to mid-May on the continental shelf. It progressed in a southwesterly direction along the Alaska Peninsula where three main areas of flathead sole spawning were indentified: near the Kenai Peninsula, in Shelikof Strait, and between the Shumagin Islands and Unimak Island. Flathead sole eggs are pelagic, and their depth distribution may be a function of their developmental stage. Data from MOCNESS tows indicated that eggs sink near time of hatching and the larvae rise to the surface to feed. The geographic distribution of larvae followed a pattern similar to the distribution of eggs, only it shifted about one month later. Larval abundance peaked from early to mid-June in the southern portion of Shelikof Strait. Biological and environmental factors may help to retain flathead sole larvae on the continental shelf near their juvenile nursery areas.