Potencial alelopático de catequinas de Tachigali myrmecophyla (leguminosae)

Two compounds, (+)-catechin and epicatechin, were isolated from leaves of T. myrmecophyla, using chromatographic techniques. The structural identification was carried out on the basis of 1H and 13C NMR spectral data and comparison with literature data. The compounds (+)-catechin and epicatechin were submitted to germination inhibition and radicle and hypocotyl growth assays. Results showed some significant activities confirming the initial hypothesis about allelopathic properties of that plant.

Investigação de metabólitos secundários de folhas de Derris urucu (Killip et Smith) Macbr. com atividades biológicas

Derris urucu, pertencente à família Leguminosae/Fabaceae, é conhecida popularmente como “timbó”. As raízes desta espécie são utilizadas comumente como pesticidas e veneno para peixe. Do gênero Derris foram relatados muitos estudos fitoquímicos, sendo as raízes a parte mais estudada das plantas desse gênero. A denominação “timbó” é mais generalizada para as espécies Derris urucu e Derris nicou que são as espécies que produzem, nas raízes, substâncias da classe dos rotenóides como a rotenona e a deguelina, de onde deriva a importância dessas plantas. Os extratos, bem como, as substâncias isoladas deste gênero são responsáveis por um vasto conjunto de atividades biológicas, principalmente a atividade inseticida. Do extrato etanólico das folhas de D. urucu, doze substâncias foram isoladas e purificadas por Cromatografia Líquida de Alta Eficiência: cinco estilbenos, seis diidroflavonóis e uma flavanona. A identificação estrutural foi feita com base na análise espectrométrica de massas, de RMN 1H e 13C e técnicas de RMN bidimensionais, além de comparação com dados encontrados na literatura. O extrato etanólico das folhas de D. urucu foi submetido a bioensaios para avaliação do seu potencial alelopático, tendo exibido relevantes percentuais de inibição da germinação de sementes e do desenvolvimento de plantas invasoras de pastagens. Com o objetivo de detectar as substâncias responsáveis pela atividade alelopática, três estilbenos e três diidroflavonóis foram selecionados e submetidos a bioensaios de inibição de germinação e de desenvolvimento da radícula e do hipocótilo de plantas daninhas. Os ensaios alelopáticos foram realizados com as substâncias isoladas e com a combinação delas, visando também avaliar o sinergismo entre elas, no entanto, as inibições observadas foram de magnitudes muito baixas. Por outro lado, quando as substâncias foram testadas em misturas observou-se um aumento significativo dos percentuais de inibição, por isso essas substâncias em misturas, podem ser consideradas promissoras para futuros estudos, envolvendo atividade alelopática. Foram realizados, também, bioensaios de atividade antioxidante com oito substâncias, sendo três estilbenos e cinco diidroflavonóis frente ao radical DPPH. Neste bioensaio, não foi observada uma atividade antioxidante relevante, justificada pela presença de poucas hidroxilas fenólicas nas estruturas das substâncias testadas.

β-glucanas de isolados fúngicos do gênero Botryosphaeria: produção, caracterização química e atividade anticoagulante

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Estudo químico e biológico de espécies de Rubiaceae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

H-1 and C-13 NMR of some alpha-halo derivatives of o-xylene

C-13 and H-1 NMR data for a series of alpha-halo derivatives of o-xylene are presented. A dynamic H-1 NMR investigation of alpha,alpha,alpha',alpha'-tetrabromo-o-xylene (5) was performed and the spectrum of the most stable conformer at 213 K is presented. The free energy of activation for the rotation of the CHBr2 groups in 5 are determined for the first time. (C) 1997 Elsevier Science Ltd.

Estudo químico e biológico dos fungos endofíticos Microascus sp. e Nodulisporium sp. associados à alga vermelha Asparagopsis Taxiformis

Pós-graduação em Química - IQ

Bioprospecção do fungo endofítico Hypoxylon investiens associado à alga marinha Asparagopsis taxiformis: potencial antifúngico, anticolinesterásico e antitumoral

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Síntese e caracterização espectroscópica de novos vanadosilicatos utilizando templates orgânicos derivados de piperidinas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Further Withaphysalin Derivatives from Acnistus arborescens

Two new epimeric chlorinated withaphysalins, rel-(4 beta,5 beta,6 alpha,18S,22R)- and rel-(4 beta,5 beta,6 alpha,18R,22R)-6-chloro-18,20-epoxy-18-ethoxy-4,5-dihydroxy-1- oxowitha-2,24-diene-26,22-lactone (1 and 2 resp.), together with the new rel-(4 beta,5 beta,6a,18R,22R)-6-chloro-18,20-epoxy-4,5-dihydroxy-18-methoxy-1-oxowitha-2,24-diene-26,22-lactone (3) and rel-(3 beta,4 beta,5 beta,6 beta,18R,22R)-5,6:18,20-diepoxy-3,18-diethoxy-4-hydroxy-1-oxowith-24-ene-26,22-lactone (4) were isolated from the leaves of Acnistus arborescens and named withaphysalins TW, respectively. The final structures and the complete 1H- and 13C-NMR assignments of the three chlorowithaphysalins 13 were performed by means of HR-ESI-MS and 1D- and 2D-NMR experiments, including COSY, HSQC, and HMBC, beside comparison with spectral data of analogous compounds from the literature. The structure of 4 was also confirmed by means of a single-crystal X-ray diffraction analysis.

Chemical constituents from three medicinal plants: Piper renitens, Siparuna guianensis and Alternanthera brasiliana

Chemical study of three medicinal plants: from leaves of Piper renitens (Miq.) Yunck, Piperaceae, and Siparuna guianensis Aubl., Siparunaceae, and from flowers of Alternanthera brasiliana (L.) Kuntze, Amaranthaceae, resulted in isolation of nine compounds: three steroids, β-sitosterol, stigmasterol from P. renitens and sitosterol-3-O-β-D-glucopyranoside from A. brasiliana, the diterpene kaurane ent-kauran-16α,17-diol from P. renitens, two derivatives kaempferol-methylether, kumatakenine (kaempferol-3,7-dimethylether) and kaempferol-3,7,3'-trimethylether from S. guianensis and three flavones, crysoeriol (5,7,4'-trihydroxy-3'-methoxyflavone), tricin (5,7,4'-trihydroxy-3',5'-dimethoxyflavone) and 7-O-β-D-glucopyranoside-5,4'-dihydroxy-3'-methoxyflavone from A. brasiliana. Compounds structures were determinate using 1D and 2D ¹H NMR and 13C spectral data, mass and IR spectra, comparing with literature data.

NMR, Metabonomics and Molecular Profiles: Applications to the Quality Assessment of Foodstuffs

Nuclear Magnetic Resonance (NMR) is a branch of spectroscopy that is based on the fact that many atomic nuclei may be oriented by a strong magnetic field and will absorb radiofrequency radiation at characteristic frequencies. The parameters that can be measured on the resulting spectral lines (line positions, intensities, line widths, multiplicities and transients in time-dependent experi-ments) can be interpreted in terms of molecular structure, conformation, molecular motion and other rate processes. In this way, high resolution (HR) NMR allows performing qualitative and quantitative analysis of samples in solution, in order to determine the structure of molecules in solution and not only. In the past, high-field NMR spectroscopy has mainly concerned with the elucidation of chemical structure in solution, but today is emerging as a powerful exploratory tool for probing biochemical and physical processes. It represents a versatile tool for the analysis of foods. In literature many NMR studies have been reported on different type of food such as wine, olive oil, coffee, fruit juices, milk, meat, egg, starch granules, flour, etc using different NMR techniques. Traditionally, univariate analytical methods have been used to ex-plore spectroscopic data. This method is useful to measure or to se-lect a single descriptive variable from the whole spectrum and , at the end, only this variable is analyzed. This univariate methods ap-proach, applied to HR-NMR data, lead to different problems due especially to the complexity of an NMR spectrum. In fact, the lat-ter is composed of different signals belonging to different mole-cules, but it is also true that the same molecules can be represented by different signals, generally strongly correlated. The univariate methods, in this case, takes in account only one or a few variables, causing a loss of information. Thus, when dealing with complex samples like foodstuff, univariate analysis of spectra data results not enough powerful. Spectra need to be considered in their wholeness and, for analysing them, it must be taken in consideration the whole data matrix: chemometric methods are designed to treat such multivariate data. Multivariate data analysis is used for a number of distinct, differ-ent purposes and the aims can be divided into three main groups: • data description (explorative data structure modelling of any ge-neric n-dimensional data matrix, PCA for example); • regression and prediction (PLS); • classification and prediction of class belongings for new samples (LDA and PLS-DA and ECVA). The aim of this PhD thesis was to verify the possibility of identify-ing and classifying plants or foodstuffs, in different classes, based on the concerted variation in metabolite levels, detected by NMR spectra and using the multivariate data analysis as a tool to inter-pret NMR information. It is important to underline that the results obtained are useful to point out the metabolic consequences of a specific modification on foodstuffs, avoiding the use of a targeted analysis for the different metabolites. The data analysis is performed by applying chemomet-ric multivariate techniques to the NMR dataset of spectra acquired. The research work presented in this thesis is the result of a three years PhD study. This thesis reports the main results obtained from these two main activities: A1) Evaluation of a data pre-processing system in order to mini-mize unwanted sources of variations, due to different instrumental set up, manual spectra processing and to sample preparations arte-facts; A2) Application of multivariate chemiometric models in data analy-sis.

Analyse von Biotransformationen und Naturstoffsynthesen in pflanzlichen Zellkulturen unter Anwendung der in vivo NMR-Spektroskopie ohne Markierung

Die Aufklärung von Biosynthesewegen erfolgt häufig mit Hilfe von Fütterungsexperimenten mit radioaktiven oder stabilen Isotopen markierten Präkusoren oder auf der Basis der Enzymreinigung mit anschließender molekularbiologischer Charakterisierung. Die erstgenannte Methode verlangt die Isolierung der Produkte. Jedoch besteht bei Aufarbeitung und Extraktion immer die Gefahr, daß sich der Metabolit teilweise oder vollständig chemisch verändert. Ein weiterer Nachteil der genannten Methoden ist, daß diese generell mühsam und zeitaufwendig sind. Mit Hilfe der in vivo NMR-Spektroskopie können diese Nachteile umgangen werden. In der vorliegenden Arbeit wurden Biotransformationen und Biosynthesesequenzen des Ajmalin-Biosyntheseweges mit Hilfe der in vivo NMR-Spektroskopie in Pflanzenzellkulturen von Rauvolfia serpentina und Rauvolfia serpentina x Rhazya stricta anhand der natürlichen 13C-Häufigkeit untersucht. Dafür wurden ein 700 MHz, 800 MHz und ein 500 MHz CryoProbe Spektrometer eingesetzt, um die Biotransformationen von Isatin-3-oxim und Isatin sowie die Metabolisierungen der Alkaloide Vellosimin, Vinorin, Vomilenin, Ajmalin, Nß-Methyl-dihydrochano-ajmalin und Perakin mit der 1H-13C invers korrelierten NMR-Spektroskopie zu verfolgen.

Optimised polyolefin branch quantification by 13 C NMR spectroscopy

Quantitative branch determination in polyolefins by solid- and melt-state 13C NMR has been investigated. Both methods were optimised toward sensitivity per unit time. While solid-state NMR was shown to give quick albeit only qualitative results, melt-state NMR allowed highly time efficient accurate branch quantification. Comparison of spectra obtained using spectrometers operating at 300, 500 and 700 MHz 1H Larmor frequency, with 4 and 7~mm MAS probeheads, showed that the best sensitivity was achieved at 500 MHz using a 7 mm 13C-1H optimised high temperature probehead. For materials available in large quantities, static melt-state NMR, using large diameter detection coils and high coil filling at 300 MHz, was shown to produce comparable results to melt-state MAS measurements in less time. While the use of J-coupling mediated polarisation transfer techniques was shown to be possible, direct polarisation via single-pulse excitation proved to be more suitable for branch quantification in the melt-state. Artificial line broadening, introduced by FID truncation, was able to be reduced by the use of π pulse-train heteronuclear dipolar decoupling. This decoupling method, when combined with an extended duty-cycle, allowed for significant improvement in resolution. Standard setup, processing and analysis techniques were developed to minimise systematic errors contributing to the measured branch contents. The final optimised melt-state MAS NMR method was shown to allow time efficient quantification of comonomer content and distribution in both polyethylene- and polypropylene-co-α-olefins. The sensitivity of the technique was demonstrated by quantifying branch concentrations of 8 branches per 100,000 CH2 for an industrial ‘linear’ polyethylene in only 13 hours. Even lower degrees of 3–8 long-chain branches per 100,000 carbons were able to be estimated in just 24 hours for a series of γ-irradiated polypropylene homopolymers.

Metallkomplexe mit sterisch anspruchsvollen mono- und bifunktionellen Triazenidoliganden

Monoanionische, stickstoffhaltige Chelatliganden sind sehr populär und werden oft als Baueinheiten zur Synthese von Metallkomplexen eingesetzt. Im Gegensatz zu den bekannten Amidinat- und β-Diketiminatliganden wurde den Triazeniden bisher weniger Aufmerksamkeit geschenkt. Dies liegt hauptsächlich daran, dass wenige, sterisch anspruchsvolle Vertreter dieser Gruppe bekannt waren. Mit der Synthese neuer biphenyl- und terphenylsubstituierter Triazenide sind diese stärker in den Fokus der Forschung gerückt. Durch die Sperrigkeit der Liganden werden unerwünschte Ligandenumverteilungsreaktionen unterdrückt und der Weg zu neuen Metallkomplexen mit bemerkenswerten Eigenschaften geebnet. Diese Arbeit beschäftigt sich mit Triazenidokomplexen der Alkalimetalle, des Magnesiums, des Zinks und des Aluminiums. Zusätzlich zu den monofunktionellen wurden bifunktionelle Triazene, welche aus einer Biphenylgruppe aufgebaut sind und zwei terphenylsubstituierte Triazengruppen tragen, synthetisiert und deren Funktion als Komplexliganden untersucht. Durch das hohe Volumen der Liganden konnten Metallkomplexe hergestellt werden, die bemerkenswerte strukturelle Eigenschaften aufweisen. So bilden beispielsweise alle dargestellten Verbindungen Kristalle, die aus monomeren Baueinheiten aufgebaut sind. Eine homoleptische Magnesiumverbindung mit zwei Triazenidliganden weist eine ungewöhnliche, planare Koordinationssphäre auf, eine Triazenidodiphenylaluminiumverbindung zeigt eine interessante Ausrichtung der Phenylgruppen, die auf π-Stapeleffekte zurückgeführt wird und die Alkalimetalltriazenide weisen sekundäre Metall-π-Aren-Wechselwirkungen auf, womit eine bessere koordinative Absättigung des Koordinationszentrums erreicht wird. Zusätzlich zur strukturellen Charakterisierung mittels Röntgendiffraktometrie wurden, wo es möglich war 1H und 13C NMR-Messungen durchgeführt, Schmelzpunkte bestimmt sowie IR- und UV-VIS-Spektren aufgenommen. Durch die hohe Dichte an aromatischen Systemen innerhalb der Verbindungen, ist es bei einer dreikernigen Zinktriazenidverbindung gelungen mittels 1H NMR-Messungen die starken Einflüsse des Ringstroms nachzuweisen. Außerdem wurden DFT-Berechnungen durchgeführt, um herauszufinden, wie sehr die räumliche Ausrichtung der Bi- bzw. Terphenylsubstituenten gegenüber der N3-Baugruppe der Triazenide die Verteilung der negativen Ladung innerhalb eines monoanionischen Triazenids und somit dessen Koordinationseigenschaften beeinflusst. Diese Effekte konnten durch experimentelle Ergebnisse unterstützt werden.

Festkörper-NMR an polymeren Kompositmaterialien

In dieser Arbeit wurden polymere Kompositmaterialien mit Hilfe von Festkörper-NMR-Techniken untersucht, um den Einfluß von Polymer-Festkörper-Kontakten auf molekulare Materialeigenschaften zu betrachten. Dabei wurden sowohl Analysen am Polymer als auch am Füllmaterial durchgeführt.rnrnIm ersten Teil der Arbeit wurde die Dynamik von Poly(ethylmethacrylat) (PEMA) in sphärischen Bürstenpartikeln gemessen. Diese Bürsten bestanden aus einem Poly(silsesquioxan)-Kern und verpfropften PEMA-Ketten, die über ATRP (atom transfer radical polymerization) an verschiedenen Kettensequenzen mit 13C an der Carboxylgruppe markiert wurden. Statische 13C-NMR-Messungen konnten zeigen, dass die Dynamik dieser Sequenzen unabhängig vom Abstand zur Oberfläche verlangsamt ist, was auf eine eingeschränkte Reptation zurückgeführt wurde.rnrnDer zweite Teil der Arbeit beschäftigt sich mit den molekularen Unterschieden von Silika-Naturkautschuk-Kompositen, die über mechanisches Mischen bzw. über eine Sol-Gel-Reaktion hergestellt wurden. Durch kinetische 1H-NMR-Messungen wurde der Umsatz der Sol-Gel-Reaktion bestimmt. Mittels heteronuklearen 29Si{1H}-NMR-Korrelationsexperimenten wurde ein direkter räumlicher Kontakt zwischen dem Inneren der Partikel und dem Polymer nachgewiesen. Dies belegt experimentell, dass im Kompositmaterial die Polymerketten in den durch Sol-Gel-Reaktion hergestellten Silikapartikeln eingeschlossen sind.