Study on steel corrosion in different seabed sediments

A series of simulation experiments on carbon steel (A(3) steel) and low alloy steel (16 Mn steel) in marine atmosphere (MA), seawater (SW) and seabed sediment (SBS) including rough sea sand, fine sea sand and seabed mud were carried out indoors for a year or so by means of individually hanging plates (IHP) and electrically connected hanging plates (ECHP). The corrosion of steels in SBS was mainly due to the macrogalvanic cell effect. The steel plates at the bottom of SBS, as the anode of a macrogalvanic cell, showed the heaviest corrosion with a corrosion rate of up to 0.12 mm/a, approximately equal to that of steel plates in marine atmosphere. The test results showed that the corrosion rates of A(3) and 16 Mn steel in marine environment were in the order: MA > SW > SBS by the IHP method; and MA > SBS > SW by the ECHP method. The corrosion rates of steels in the water/sediment interface were directly proportional to the grain size of the SBS by the ECHP method, but those of steels in the water/sediment interface did not vary with the grain size of SBS by the IHP method. The corrosion rate of low-alloy steel was a little higher than that of carbon steel. The results of this study have important applications for design of offshore steel structures such as oil platform, pier, and port.

青海海北地区高山嵩草草甸植物群落的结构特征及其分布格局

对高山草甸主要植物群落结构特征及其分布格局的研究结果表明, 矮嵩草草甸植物群落的丰富度最大, 隶属18科, 43属45种, 呈多优势种植物群落; 小嵩草草甸居中, 隶属11科, 30属35种, 小嵩草(K obresia py gm aea) 为优势种; 藏嵩草沼泽化草甸最小, 隶属9科, 21属23种, 藏嵩草(K. tibetica) 为优势种。其中, 有9个种群为3个群落中的共有种, 分别占矮嵩草草甸、小嵩草草甸和藏嵩草沼泽化草甸总种数的20100%、25171% 和39113%。它们在水分资源位上的生态位宽度较大。3个植物群落类型的种2面积关系呈对数曲线分布, 群落的最小样方面积为0125m 2或015m 2较适宜。种2多度分布呈对数正态分布, 其分布模型的表达式如下: S (R ) = S 0e- (a2R 2)

Evaluation of a national evidence-based health care course via teleconference in a developing country

Rationale, aims and objectives Continuing health education is essential but challenged. in 2006, the Brazilian Cochrane Center, in collaboration with the Ministry of Health, launched a mass teaching initiative in evidence-based health care (EBH) for public-sector professionals via teleconferencing. This 152-hour, interactive EBH course has enrolled over 4500 professionals. This study aimed to assess the acquisition EBH knowledge and skills, as well as the attitudes and perceptions of a sample of students enrolled in the 2009 course via teleconferencing.Methods This prospective cohort study analyzed three aspects of this 152-hour EBH course that recruited 1040 volunteer participants, all public health sector employees working in 131 different hospitals or health agencies. Pre- and post-course tests using a modified version of the Berlin questionnaire with 20 multiple-choice questions were used to examine knowledge acquisition in a sample of 297 students. Tests were completed upon registration and at course completion. the research projects submitted by 872 participants were evaluated to assess skill acquisition. Answers to an anonymous survey assessed the attitudes and perceptions of 914 participants.Results There was a significant increase in knowledge from baseline to course completion (mean scores 8.2 +/- 3.3 versus 13.7 +/- 3.0, P < 0.001). Over 90% of the research projects were judged to be of adequate quality (appropriate rationale for the study, well-formulated research question and feasible execution); over 95% of the participants were satisfied with the course.Conclusion the Brazilian EBH course via teleconference improved the knowledge and skills of public-sector health professionals and was approved by the vast majority of students.

Aspects of Armageddon: An exploration of the role of volcanic eruptions in human history and civilization

Grattan, J.P. (2006) Aspects of Armageddon: An exploration of the role of volcanic eruptions in human history and civilization, Quaternary International 151, 10-18.

Salicylate accumulation inhibits growth at chilling temperature in Arabidopsis

Ian M. Scott, Shannon M. Clarke, Jacqueline E. Wood and Luis A.J. Mur (2004). Salicylate accumulation inhibits growth at chilling temperature in Arabidopsis. Plant Physiology, 135(2), 1040-1049. RAE2008

Asesoría en diseño y asistencia técnica al sector artesanal del Norte de Santander.

14 hojas.

Christian missions and social progress : a sociological study of foreign missions (vol. 1)

http://www.archive.org/details/socialprogress00dennuoft/

Fundamental studies on the application of enzymes when brewing with unmalted oats and sorghum

The use of unmalted oats or sorghum in brewing has great potential for creating new beer types/flavors and saving costs. However, the substitution of barley malt with oat or sorghum adjunct is not only innovative but also challenging due to their specific grain characteristics. The overall objectives of this Ph.D. project were: 1) to investigate the impact of various types and levels of oats or sorghum on the quality/processability of mashes, worts, and beers; 2) to provide solutions as regards the application of industrial enzymes to overcome potential brewing problems. For these purposes, a highly precise rheological method using a controlled stress rheometer was developed and successfully applied as a tool for optimizing enzyme additions and process parameters. Further, eight different oat cultivars were compared in terms of their suitability as brewing adjuncts and two very promising types identified. In another study, the limitations of barley malt enzymes and the benefits of the application of industrial enzymes in high-gravity brewing with oats were determined. It is recommended to add enzymes to high-gravity mashes when substituting 30% or more barley malt with oats in order to prevent filtration and fermentation problems. Pilot-scale brewing trials using 10–40% unmalted oats revealed that the sensory quality of oat beers improved with increasing adjunct level. In addition, commercially available oat and sorghum flours were implemented into brewing. The use of up to 70% oat flour and 50% sorghum flour, respectively, is not only technically feasible but also economically beneficial. In a further study on sorghum was demonstrated that the optimization of industrial mashing enzymes has great potential for reducing beer production costs. A comparison of the brewing performance of red Italian and white Nigerian sorghum clearly showed that European grown sorghum is suitable for brewing purposes; 40% red sorghum beers were even found to be very low in gluten.

Revisiting the carrier-phase source-term formulation in mixed Lagrangian-Eulerian particle models

The formulation of the carrier-phase momentum and enthalpy source terms in mixed Lagrangian-Eulerian models of particle-laden flows is frequently reported inaccurately. Under certain circumstances, this can lead to erroneous implementations, which violate physical laws. A particle- rather than carrier-based approach is suggested for a consistent treatment of these terms.

Converting best manual practice into generic automatable strategies for unstructured mesh parallelisation

The manual effort required to convert sequential computational mechanics programs into a useful, scalable parallel form is considerable. Tools that can assist in the conversion process are clearly required. Computer aided parallelisation tools (CAPTools) have been developed to generate efficient parallel code for real world structured grid application codes such as Computational Fluid Dynamics. Automatable single-program multi-data (SPMD) overlapping domain decomposition (DD) techniques established for structured grid codes have been adapted by the authors to manually parallelise unstructured mesh applications. Inspector loops have been used to provide generic techniques for the run-time support necessary to extend the capabilities of CAPTools to automatic implementation of SPMD DD techniques in the parallelisation of unstructured mesh codes. Copyright © 1999 John Wiley & Sons, Ltd.

Portability, predictability and performance for parallel computing: BSP in practice

We report on practical experience using the Oxford BSP Library to parallelize a large electromagnetic code, the British Aerospace finite-difference time-domain code EMMA T:FD3D. The Oxford BS Library is one of the first realizations of the Bulk Synchronous Parallel computational model to be targeted at numerically intensive scientific (typically Fortran) computing. The BAe EMMA code is one of the first large-scale applications to be parallelized using this library, and it is an important demonstration of the cost effectiveness of the BSP approach. We illustrate how BSP cost-modelling techniques can be used to predict and optimize performance for single-source programs across different parallel platforms. We provide predicted and observed performance figures for an industrial-strength, single-source parallel code for a variety of real parallel architectures: shared memory multiprocessors, workstation clusters and massively parallel platforms.

A computational model of coupled heat and moisture transfer with phase change in granular sugar during varying environmental conditions

As part of a comprehensive effort to predict the development of caking in granular materials, a mathematical model is introduced to model simultaneous heat and moisture transfer with phase change in porous media when undergoing temperature oscillations/cycling. The resulting model partial differential equations were solved using finite-volume procedures in the context of the PHYSICA framework and then applied to the analysis of sugar in storage. The influence of temperature on absorption/desorption and diffusion coefficients is coupled into the transport equations. The temperature profile, the depth of penetration of the temperature oscillation into the bulk solid, and the solids moisture content distribution were first calculated, and these proved to be in good agreement with experimental data. Then, the influence of temperature oscillation on absolute humidity, moisture concentration, and moisture migration for different parameters and boundary conditions was examined. As expected, the results show that moisture near boundary regions responds faster than farther away from them with surface temperature changes. The moisture absorption and desorption in materials occurs mainly near boundary regions (where interactions with the environment are more pronounced). Small amounts of solids moisture content, driven by both temperature and vapour concentration gradients, migrate between boundary and center with oscillating temperature.

Effects of thermal cycling profiles on the performance of chip-on-flex assembly using anisotropic conductive films

Anisotropic conductive films (ACFs) are widely used in the electronic packaging industries because of their fine pitch potential and the assembly process is simpler compared to the soldering process. However, there are still unsolved issues in the volume productions using ACFs. The main reason is that the effects of many factors on the interconnects are not well understood. This work focuses on the performance of ACF-bonded chip-on-flex assemblies subjected to a range of thermal cycling test conditions. Both experimental and three-dimensional finite element computer modelling methods are used. It has been revealed that greater temperature ranges and longer dwell-times give rise to higher stresses in the ACF interconnects. Higher stresses are concentrated along the edges of the chip-ACF interfaces. In the experiments, the results show that higher temperature ranges and prolonged dwell times increase contact resistance values. Close examination of the microstructures along the bond-line through the scanning electron microscope (SEM) indicates that cyclic thermal loads disjoint the conductive particles from the bump of the chip and/or pad of the substrate and this is thought to be related to the increase of the contact resistance value and the failure of the ACF joints.

An analysis of masculine and feminine writings in postings within a series of health and social care online undergraduate courses

This study aims to extend understanding of pedagogic dialogue by analysing the effect that the gender of the student has on interaction within a selection of ordinary health and social care on line courses.