Structure, Spectra and Redox Behaviour of Copper(11) Complexes of Bis( benzimidazoly1)diamine Ligands

The linear quadridentate ligand N,N'-bis(benzimidazoI-2-ylethyl)ethane-l,2-diamine (L') and its 1 - methylbenzimidazole analogue (L2) and homologues form 1 : 1 complexes with Cu(CIO,),; L' also forms complexes of the types CuL'X, where X = NO,, PF,, Br or CI and CuL'(X)Y where X = CI or Br and Y = CIO, or Br. Deep blue CuL1Br,*2H20 crystallizes in the monoclinic space group C2/c with Z = 4, a = 9.91 9(2), b = 16.626(3), c = 14.1 02(3) le\ and p = 94.39(2)". The structure was solved by Patterson and Fourier difference methods and refined by the least-squares technique to R = 0.064 for 2195 independent reflections with / > 1.50(/). The molecule lies on a two-fold axis symmetrically around Cu". The co-ordination around Cu" is found to be square planar with two amino nitrogens and two benzimidazole nitrogens forming the equatorial plane [CU-N 1.983(3) and 2.037(4) A]. The bromides are at longer distances [3.349(1) A] in axial sites. Ligand field and EPR spectra indicate that one bromide or chloride ion is axially co-ordinated to Cu" in [CuL1l2+. This ion exhibits quasi-reversible redox behaviour. Electrochemical studies of the dihalides in methanol have established the presence of [CuL'X,], [CuL'(X)]+ and [CuL'I2+ in equilibrium. In complexes with 565 [CuL4I2+ [L4 = N,Nbis( benzimidazol-2-ylmethyl)ethane-l,2-diamine] and 555 [CuL3] [L3 = N,N'-bis(1 -methylbenzimidazol- 2-ylmethyl)propane-l,3-diamine] chelate rings, Cull does not seem to lie in the N, square plane, as revealed by their low A values and irreversible electrochemical behaviour. The Cu"-Cu' redox potentials in methanol are in the order [CuL1I2+ < [CuL3I2+ < [CuL4I2+; this illustrates that sixmembered chelate rings are suitable to stabilize Cu", when CU-N 0 interactions are favourable.

Enhancing the magnetic characteristics of BiFeO3 nanoparticles by Ca, Ba co-doping

Multiferroic nanoparticles (NPs) of pristine and Ca, Ba co-doped BiFeO3 were synthesized by a facile sal gel route. Co-doping was done by fixing the total dopant concentration at 5 mol% and then the relative concentrations of Ca and Ba was varied. Structural, optical and magnetic properties of the NPs were investigated using different techniques. UV-Vis absorption spectra of BiFeO3 NPs showed a substantial blue shift of similar to 100 nm (530 nm -> 430 nm) on Ca. Ba co-doping which corresponds to increase in band gap by 0.5 eV. Fe-57 Mossbauer spectroscopy confirmed that iron is present only in 3(+) valence state in all co-doped samples. The coercive field increased by 18 times for Bi0.95Ca0.01Ba0.04FeO3 samples, which is the maximum enhancement, observed amongst all the 5 mol% doped samples. At the equimolar (2.5 mol % each) concentration of co-dopants, the coercive field shows a significant enhancement of about 9 times (220 Oe -> 2014 Oe) with concomitant increase in saturation magnetization by 7 times. Thus, equimolar co-doping causes simultaneous enhancement of the twin aspects of magnetic properties thereby making them better suited for device applications. (C) 2012 Elsevier B.V. All rights reserved.

Auto-ignition based synthesis of Y2O3 for photo- and thermo-luminescent applications

We present a simple route for synthesis of Y2O3 for both photoluminescent (PL) and thermoluminescent (TL) applications. We show that by simply switching the fuel from ethylene di-amine tetracetic acid (EDTA) to its disodium derivative (Na-2-EDTA), we obtain a better photoluminescent material. On the other hand, use of EDTA aids in formation of Y2O3 which is a better thermoluminescent material. In both cases pure cubic nano-Y2O3 is obtained. For both the material systems, structural characterization, photoluminescence, thermoluminescence, and absorbance spectra are reported and analyzed. Use of EDTA results in nano Y2O3 with crystallite size similar to 10 nm. Crystallinity improves, and crystallite size is larger (similar to 30 nm) when Na-2-EDTA is used. TL response of Y2O3 nanophosphors prepared by both fuels is examined using UV radiation. Samples prepared with EDTA show well resolved glow curve at 140 degrees C, while samples prepared with Na-2-EDTA shows a glow curve at 155 degrees C. Effect of UV exposure time on TL characteristics is investigated. The TL kinetic parameters are also calculated using glow curve shape method. Results indicate that the TL behavior of both the samples follow a second order kinetic model. (C) 2013 Elsevier B.V. All rights reserved.

Nanoindentation behavior of nanotwinned Cu: Influence of indenter angle on hardness, strain rate sensitivity and activation volume

The influence of strain on the mechanical properties and deformation kinetic parameters of nanotwinned (at) copper is investigated by a series of nanoindentation experiments, which were performed by employing sharp indenters with five varying centerline-to-face angles (psi). Comparison experiments were also conducted on (1 1 0) single crystalline Cu. Experimental results indicate that, unlike coarsegrained materials, nt-Cu is prone to plastic flow softening with large material pile-up around the indentation impression at high levels of strains. Localized detwinning becomes more significant with decreasing psi, concomitant with reduced strain-rate sensitivity (m) and enhanced activation volume (V*). The m of nt-Cu is found to depend sensitively on psi with a variation of more than a factor of 3, whereas V* exhibits a much less sensitive trend. This paper discusses the validation of the experimental techniques and the implications of various deformation kinetic parameters on the underlying deformation mechanisms of nt-Ca. 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Self-assembly of discrete metallamacrocycles employing half-sandwich octahedral diruthenium(II) building units and imidazole-based ligands

Equimolar combination of a series of binuclear half-sandwich p-cymene ruthenium(II) building units Ru-2(mu-eta(4)-C2O4)(MeOH)(2)(eta(6)-p-cymene)(2)](OTf)(2) 1a](OTf)(2), Ru-2(mu-eta(4)-N,N'-diphenyloxamidato)( MeOH)(2)(eta(6)-p-cymene)(2)](OTf)(2) 1b](OTf)(2) and Ru-2(mu-eta(4)-C6H2O4)(MeOH)(2)(eta(6)-p-cymene)(2)](OTf)(2) 1c](OTf)(2) separately with imidazole-based ditopic ligands (L-1-L-2) in methanol yielded a series of tetranuclear metallamacrocycles 2-7](OTf)(4), respectively L-1 = 1,4-bis(imidazole-1-yl)benzene; L-2 = 4,4'-bis(imidazole-1-yl)biphenyl; OTf- = O3SCF3-]. Similarly, the reaction of Ru-2(mu-eta(4)-C2O4)(MeOH)(2)(eta(6)-p-cymene)2](OTf)(2) 1a](OTf)(2) with a triazine-based tritopic ligand 1,3,5-tris(imidazole-1-yl) triazine (L3) in 3: 2 M ratio afforded an unexpected tetranuclear macrocycle 8](OTf)(4) instead of an expected trigonal prismatic cage 8a](OTf)(6). All the self-assembled macrocycles 2-8](OTf)(4) were isolated in moderate to high yields and were fully characterized by multinuclear H-1, F-19] NMR, IR and electrospray ionization mass spectrometry (ESI-MS). In addition, X-ray diffraction study on the single crystals of 3](OTf)(4) and 8](OTf)(4) also indicated the formation 2 + 2] self-assembled macrocycles. Despite the possibility of formation of different conformational isomeric macrocycles (syn-and anti) and polymeric product due to free rotation of ligand sites of imidazole linkers, the selective formation of single conformational isomer (anti) as the only product is quite interesting. Furthermore, the photo-and electrochemical properties of these assemblies have been studied using UV/Vis absorption and cyclic voltammetry analysis. (c) 2013 Elsevier B.V. All rights reserved.

Benchmarking sustainability of Indian electricity system: An indicator approach

India needs to significantly increase its electricity consumption levels, in a sustainable manner, if it has to ensure rapid economic development, a goal that remains the most potent tool for delivering adaptation capacity to its poor who will suffer the worst consequences of climate change. Resource/supply constraints faced by conventional energy sources, techno-economic constraints faced by renewable energy sources, and the bounds imposed by climate change on fossil fuel use are likely to undermine India's quest for having a robust electricity system that can effectively contribute to achieving accelerated, sustainable and inclusive economic growth. One possible way out could be transitioning into a sustainable electricity system, which is a trade-off solution having taken into account the economic, social and environmental concerns. As a first step toward understanding this transition, we contribute an indicator based hierarchical multidimensional framework as an analytical tool for sustainability assessment of electricity systems, and validate it for India's national electricity system. We evaluate Indian electricity system using this framework by comparing it with a hypothetical benchmark sustainable electrical system, which was created using best indicator values realized across national electricity systems in the world. This framework, we believe, can be used to examine the social, economic and environmental implications of the current Indian electricity system as well as setting targets for future development. The analysis with the indicator framework provides a deeper understanding of the system, identify and quantify the prevailing sustainability gaps and generate specific targets for interventions. We use this framework to compute national electricity system sustainability index (NESSI) for India. (C) 2014 Elsevier Ltd. All rights reserved.

Correlation of microstructure and creep behaviour of MRI230D Mg alloy developed by two different casting technologies

The relationship between the as-cast microstructure and creep behaviour of the heat-resistant MRI230D Mg alloy produced by two different casting technologies is investigated. The alloy in both ingot-casting (IC) and high pressure die-casting (HPDC) conditions consists of alpha-Mg, 06 ((Mg,AI)(2)Ca), Al-Mn and Sn-Mg-Ca rich phases. However, the HPDC alloy resulted in relatively finer grain size and higher volume fraction of finer, denser network of eutectic C36 phase in the as-cast microstructure as compared to that of the IC alloy. The superior creep resistance exhibited by the HPDC alloy at all the stress levels and temperatures employed in the present investigation was attributed to the more effective dispersion strengthening effect caused by the presence of finer and denser network of the C36 phase. The increased amount of the eutectic C36 phase was the only change observed in the microstructures of both alloys following creep tests. (C) 2015 Elsevier B.V. All rights reserved.

Tuning of dielectric, pyroelectric and ferroelectric properties of 0.715Bi(0.5)Na(0.5)TiO(3)-0.065BaTiO(3)-0.22SrTiO(3) ceramic by internal clamping

This study systematically investigates the phenomenon of internal clamping in ferroelectric materials through the formation of glass-ceramic composites. Lead-free 0.715Bi(0.5)Na(0.5)TiO(3)-0.065BaTiO(3)-0.22SrTiO(3) (BNT-BT-ST) bulk ferroelectric ceramic was selected for the course of investigation. 3BaO - 3TiO(2) - B2O3 (BTBO) glass was then incorporated systematically to create sintered samples containing 0%, 2%, 4% and 6% glass (by weight). Upon glass induction features like remnant polarization, saturation polarization, hysteresis losses and coercive field could be varied as a function of glass content. Such effects were observed to benefit derived applications like enhanced energy storage density similar to 174 k J/m(3) to similar to 203 k J/m(3) and pyroelectric coefficient 5.7x10(-4) Cm-2K-1 to 6.8x10(-4) Cm-2K-1 by incorporation of 4% glass. Additionally, BNT-BT-ST depolarization temperature decreased from 457K to 431K by addition of 4% glass content. Glass incorporation could systematically increases diffuse phase transition and relaxor behavior temperature range from 70 K to 81K and 20K to 34 K, respectively when 6% and 4% glass content is added which indicates addition of glass provides better temperature stability. The most promising feature was observed to be that of dielectric response tuning. It can be also used to control (to an extent) the dielectric behavior of the host ceramic. Dielectric permittivity and losses decreased from 1278 to 705 and 0.109 to 0.107 for 6% glass, at room temperature. However this reduction in dielectric constant and loss increases pyroelectric figures of merit (FOMs) for high voltage responsivity (F-v) high detectivity (F-d) and energy harvesting (F-e) from 0.018 to 0.037 m(2)C(-1), 5.89 to 8.85 mu Pa-1/2 and 28.71 to 61.55 Jm(-3)K(-2), respectively for 4% added ceramic-glass at room temperature. Such findings can have huge implications in the field of tailoring ferroelectric response for application specific requirements. (C) 2015 Author(s).

A recursive multi-scaling approach to regional flood frequency analysis

Scaling approaches are widely used by hydrologists for Regional Frequency Analysis (RFA) of floods at ungauged/sparsely gauged site(s) in river basins. This paper proposes a Recursive Multi-scaling (RMS) approach to RFA that overcomes limitations of conventional simple- and multi-scaling approaches. The approach involves identification of a separate set of attributes corresponding to each of the sites (being considered in the study area/region) in a recursive manner according to their importance, and utilizing those attributes to construct effective regional regression relationships to estimate statistical raw moments (SMs) of peak flows. The SMs are then utilized to arrive at parameters of flood frequency distribution and quantile estimate(s) corresponding to target return period(s). Effectiveness of the RMS approach in arriving at flood quantile estimates for ungauged sites is demonstrated through leave-one-out cross-validation experiment on watersheds in Indiana State, USA. Results indicate that the approach outperforms index-flood based Region-of-Influence approach, simple- and multi-scaling approaches and a multiple linear regression method. (C) 2015 Elsevier B.V. All rights reserved.

Evaluación de veinte lineas de sorgo (Sorghum bicolor (L) Moench) por su reacción a enfermedades en tres localidades de Nicaragua, postrera 2003

Para contribuir a resolver la problemática varietal en el país, se han sumado esfuerzos en evaluar líneas de sorgo por lo que se realizó un experimento en diferentes zonas productoras de sorgo en Nicaragua utilizando un vivero de líneas para evaluar plagas y enfermedades ADIN (All Diseases and Insect Nursery), facilitado por el Dr. Larry E. Claflin, fitopatológo de la Universidad del Estado Kansas (KSU), mediante el programa INTSORMIL (International Sorghum and Millet Project. El estudio se desarrolló de agosto a diciembre del 2003. Se utilizó, parcelas experimentales de 5 m. lineales con un área total de 75 m2 con dos repeticiones en cada localidad; Centro Nacional de Investigaciones Agropecuarias-Instituto Nicaragüense de Tecnología Agropecuaria, (CNIA–INTA), Managua; Tisma, Masaya y Ranchería, Chinandega. Entre las variables estudiadas se evaluó severidad de enfermedades foliares, severidad de mohos en panoja y rendimiento de grano. Para la evaluación de las enfermedades se utilizó una escala de daño que incluye valores de 0 %-100 % de severidad propuesta por (Frederiksen, 2000); modificada por (Pichardo, 2001). Los datos colectados fueron procesados y sometidos aun ANDEVA, y separación de medias utilizando la prueba de Tukey (α=0.05). Se realizó análisis de regresi ón lineal para determinar el rendimiento predictivo por localidad y líneas. Los resultados obtenidos mostraron que existen diferencias estadísticas entre las líneas para las tres localidades. Las líneas evaluadas en Ranchería presentaron los menores niveles o valores de severidad de en fermedades (7-21 %); valores intermedios (15-39%) las líneas evaluadas en Tisma y los más altos valores (39-58 %) las líneas evaluadas en el CNIA–INTA. Las enfermedades presentes en el estudio fueron: mancha gris de la hoja causada por Cercospora sorghi, Ellis & Everth, antracnosis causada por Colletotrichum graminicola G. W. Wilson y mancha zonada de la hoja causada por Gloeocercospora sorghi D. Bain & Edgerton ex Deighton. Los mayores rendimientos fueron obtenidos por la línea Sureño con 9 037.31, 5 296.57 y 3 566.18 kg ha-1 en CNIA-INTA, Tisma y Ranchería respectivamente; y los menores rendimientos por BLD6(w+y) en CNIA-INTA, con 1 184 kg ha-1, B.9955 en Tisma, con 870.53 kg ha-1 y en Ranchería la línea 98BRON122 con 1 352.55 kg ha -1.

Welche Faktoren beeinflussen die Stärke der Dorsch-Jahresklassen?

In the previous years extensive investigations were carried out concerning the reproduction biology of cod in the Baltic Sea. The analyses showed that the year class strength of the eastern Baltic cod stock is decisively determined by the bad oxygen conditions during the spawning season in the summer and by sprat as predator of the cod eggs. In the western Baltic Sea these factors have no importance. The year classes are mainly determined by the strong variations of the portions of female cods, which participated in the spawning activities in the region. The individuals within the length range from 35 cm to 45 cm have a special importance at this time, caused by the actual age structure of the cod stock.

WEFTA interlaboratory comparison on nitrogen determination by Kjeldahl digestion in fishery products and standard substances

14 Laboratorien aus 12 europäischen Ländern nahmen an einer Laborvergleichsuntersuchung zur Stickstoffbestimmung in Fischerzeugnissen und Standardsubstanzen nach Kjeldahl teil. 13 Laboratorien erzielten dabei Ergebnisse, die alle in engen Grenzen um die gefundenen Mittelwerte streuten. Der von den einzelnen Teilnehmern erzielte Variationskoeffizient war mit etwa 0,5 % gering. Auch die Standardsubstanzen mit bekanntem Stickstoffgehalt konnten überwiegend mit hinreichender Genauigkeit (98 % der vom Hertsteller angegebenen Gehalte) analysiert werden. Der ideale Kjeldahlaufschluß ist durch kurze Aufschlußzeiten (ca. 120 min), eine Aufschlußtemperatur bei 430° C und durch die Wahl des für die jeweilige Matrix geeigneten Katalysators gekennzeichnet.

Media of communication among fishermen around Kainji Lake basin

The findings are presented of a study conducted in the framework of the Nigerian-German Kainji Lake Fisheries Promotion Project to examine the role and structure of communication in fishing villages around Kainji Lake in Nigeria. The major aim was to be able to utilize the knowledge at a later stage in the project cycle to pass on fisheries extension messages to fishing communities. The study had the following terms of reference: 1) describe the structure and processes of communication of fishermen around Kainji Lake; 2) identify the formal and informal media of communication used by the fishermen to communicate information concerning their job; 3) describe the problems inhibiting usage of the different media identified; 4) ascertain the extent of use of mass media by fishermen around the lake; and, 5) identify acceptable ways by which fisheries information can be repackaged for the use of extension workers. (PDF contains 58 pages)

Nutritional habits and food consumption pattern of fishing communities around Lake Kainji, Nigeria

The findings are presented of a nutrition survey carried out in the framework of the Nigerian-German Kainji Lake Fisheries Promotion Project in March/April 1995. The major aim of the study was to obtain closer information on the food habits and food consumption patterns of the fishing population, especially the quantification of fish and small fish in particular, consumed at the household level. A standardized questionnaire was used to collect relevant information on demographic, education and occupational profiles; the information was collected in 39 villages in the southern sector of Kainji Lake. (PDF contains 75 pages)

The nutritional status of pre-school children, Kainji Lake communities, Nigeria: a baseline survey

This survey was carried out to provide the Kainji Lake Fisheries Promotion Project (KLFPP), whose overall goal is the improvement of the standard of living of fishing communities around Kainji Lake, Nigeria, and an increase in the availability of fish to consumers, with nutritional status baseline data for long-term monitoring and evaluation of the overall project goal. In a cross-sectional survey, baseline anthropometric data was collected from 768 children, aged 3-60 months in 389 fisherfolk households around the southern sector of Kainji Lake, Nigeria. In addition, data was collected on the nutritional status and fertility of the mothers, vaccination coverage of children and child survival indicators. For control purposes, 576 children and 292 mothers from non-fishing households around Kainji Lake were likewise covered by the survey. A standardised questionnaire was used to collect relevant information, while anthropometric measurements were made using appropriate equipment. Data compilation and analysis was carried out with DATAEASE registered and EPI-INFO registered software, using NCHS reference data for the analysis of anthropometric measurements. The prevalence of stunted children in fishing households was high at 40%, while the prevalence of wasted and underweight children was likewise high at 10% and 29% respectively. Children from non-fishing households had a marginally lower prevalence of stunting, wasting and underweight with 37%, 7% and 25 % respectively, although these differences were not statistically significant. Considering the fact that the survey was carried out during a period of relative food abundance, the prevalence of wasting and underweight children is likely to be much higher during periods of food shortage. The prevalence of stunting, wasting and underweight was relatively high for children aged 3 to 23 months, suggesting an increased risk of malnutrition during this period, most likely associated with inadequate weaning practices. The prevalence of malnourishment amongst women of child-bearing age was relatively high, irrespective of occupation of the household, with an average of 11% undernourished and 6% wasted. Vaccination coverage was very low while infant and child mortality were extremely high with about 1 in 5 children dying before their fifth birthday. Based on the ethical obligation to maximise the potential benefits of the survey, recommendations for activities to improve community nutrition and health were made for communication to relevant authorities. (PDF contains 52 pages)