Dark matter dominance at all radii in the superthin galaxy UGC 7321

We model the shape and density profile of the dark matter halo of the low surface brightness, superthin galaxy UGC 7321, using the observed rotation curve and the H i scale height data as simultaneous constraints. We treat the galaxy as a gravitationally coupled system of stars and gas, responding to the gravitational potential of the dark matter halo. An isothermal halo of spherical shape with a core density in the range of View the MathML source and a core radius between 2.5 and 2.9 kpc, gives the best fit to the observations for a range of realistic gas parameters assumed. We find that the best-fit core radius is only slightly higher than the stellar disc scale length (2.1 kpc), unlike the case of the high surface brightness galaxies where the halo core radius is typically 3–4 times the disc scale length of the stars. Thus our model shows that the dark matter halo dominates the dynamics of the low surface brightness, superthin galaxy UGC 7321 at all radii, including the inner parts of the galaxy.

Effect of residual stresses and metallographic stability on the over all performance of integral diaphragm material

The integral diaphragm pressure transducer consists of a diaphragm machined from precipitation hardened martensitic (APX4) steel. Its performance is quite significant as it depends upon various factors such as mechanical properties including induced residual stress levels, metallurgical and physical parameters due to different stages of processing involved. Hence, the measurement and analysis of residual stress becomes very important from the point of in-service assessment of a component. In the present work, the stress measurements have been done using the X-ray diffraction (XRD) technique, which is a non-destructive test (NDT). This method is more reliable and widely used compared to the other NDT techniques. The metallurgical aspects have been studied by adopting the conventional metallographic practices including examination of microstructure using light microscope. The dimensional measurements have been carried out using dimensional gauge. The results of the present investigation reveals that the diaphragm material after undergoing series of realization processes has yielded good amount of retained austenite in it. Also, the presence of higher compressive stresses induced in the transducer results in non-linearity, zero shift and dimensional instability. The problem of higher retained austenite content and higher compressive stress have been overcome by adopting a new realization process involving machining and cold and hot stabilization soak which has brought down the retained austenite content to about 5–6% and acceptable level of compressive stress in the range −100 to −150 MPa with fine tempered martensitic phase structure and good dimensional stability. The new realization process seems to be quite effective in terms of controlling retained austenite content, residual stress, metallurgical phase as well as dimensional stability and this may result in minimum zero shift of the diaphragm system.

Data-aware task scheduling for all-to-all comparison problems in heterogeneous distributed systems

Solving large-scale all-to-all comparison problems using distributed computing is increasingly significant for various applications. Previous efforts to implement distributed all-to-all comparison frameworks have treated the two phases of data distribution and comparison task scheduling separately. This leads to high storage demands as well as poor data locality for the comparison tasks, thus creating a need to redistribute the data at runtime. Furthermore, most previous methods have been developed for homogeneous computing environments, so their overall performance is degraded even further when they are used in heterogeneous distributed systems. To tackle these challenges, this paper presents a data-aware task scheduling approach for solving all-to-all comparison problems in heterogeneous distributed systems. The approach formulates the requirements for data distribution and comparison task scheduling simultaneously as a constrained optimization problem. Then, metaheuristic data pre-scheduling and dynamic task scheduling strategies are developed along with an algorithmic implementation to solve the problem. The approach provides perfect data locality for all comparison tasks, avoiding rearrangement of data at runtime. It achieves load balancing among heterogeneous computing nodes, thus enhancing the overall computation time. It also reduces data storage requirements across the network. The effectiveness of the approach is demonstrated through experimental studies.

Editorial: In 2035, will all bacteria be multidrug-resistant? No

The spread of multidrug-resistant (MDR) bacteria has reached a threatening level. Extended-spectrum betalactamase- producing enterobacteriaceae (ESBLE) are now endemic in many hospitals worldwide as well as in the community, while resistance rates continue to rise steadily in Acinetobacter baumannii and Pseudomonas aeruginosa [1]. Even more alarming is the dissemination of carbapenemase-producing enterobacteriaceae (CPE), causing therapeutic and organizational problems in hospitals facing outbreaks or endemicity. This context could elicit serious concerns for the coming two decades; nevertheless, effective measures exist to stop the amplification of the problem and several axes of prevention remain to be fully exploited, leaving room for realistic hopes, at least for many parts of the world...

Stabilization of an All-Metal Antiaromatic Molecule (Al4Li4) Using BH and C as Caps

It has been reported by Pati et al. (J. Am. Chem. Soc. 2005, 127, 3496) that coordination with a transition metal can stabilize the “antiaromatic”, all-metal compound Al4Li4. Here, we report that it can also be stabilized by capping with a main group element like C and its isoelectronic species BH. Our calculations of binding energy, nuclear independent chemical shift, energy decomposition analysis, and molecular orbital analysis support the capping-induced stability, reduction of bond length alternation, and increase of aromaticity of these BH/C-capped Al4Li4 systems. The interaction between px and py orbitals of BH/C and the HOMO and LUMO of Al4Li4 is responsible for the stabilization. Our calculations suggest that capping can introduce fluxionality at room temperature.

Not in all Walks of Life? : Social Differences in Suicide Mortality

In Finland, the suicide mortality trend has been decreasing during the last decade and a half, yet suicide was the fourth most common cause of death among both Finnish men and women aged 15 64 years in 2006. However, suicide does not occur equally among population sub-groups. Two notable social factors that position people at different risk of suicide are socioeconomic and employment status: those with low education, employed in manual occupations, having low income and those who are unemployed have been found to have an elevated suicide risk. The purpose of this study was to provide a systematic analysis of these social differences in suicide mortality in Finland. Besides studying socioeconomic trends and differences in suicide according to age and sex, different indicators for socioeconomic status were used simultaneously, taking account of their pathways and mutual associations while also paying attention to confounding and mediatory effects of living arrangements and employment status. Register data obtained from Statistics Finland were used in this study. In some analyses suicides were divided into two groups according to contributory causes of death: the first group consisted of suicide deaths that had alcohol intoxication as one of the contributory causes, and the other group is comprised of all other suicide deaths. Methods included Poisson and Cox regression models. Despite the decrease in suicide mortality trend, social differences still exist. Low occupation-based social class proved to be an important determinant of suicide risk among both men and women, but the strong independent effect of education on alcohol-associated suicide indicates that the roots of these differences are probably established in early adulthood when educational qualifications are obtained and health-behavioural patterns set. High relative suicide mortality among the unemployed during times of economic boom suggests that selective processes may be responsible for some of the employment status differences in suicide. However, long-term unemployment seems to have causal effects on suicide, which, especially among men, partly stem from low income. In conclusion, the results in this study suggest that education, occupation-based social class and employment status have causal effects on suicide risk, but to some extent selection into low education and unemployment are also involved in the explanations for excess suicide mortality among the socially deprived. It is also conceivable that alcohol use is to some extent behind social differences in suicide. In addition to those with low education, manual workers and the unemployed, young people, whose health-related behaviour is still to be adopted, would most probably benefit from suicide prevention programmes.

We Are All Georgians : The Neoconservative Narrative on the Russia-Georgia War

In this thesis I examine the U.S. foreign policy discussion that followed the war between Russia and Georgia in August 2008. In the politically charged setting that preceded the presidential elections, the subject of the debate was not only Washington's response to the crisis in the Caucasus but, more generally, the direction of U.S. foreign policy after the presidency of George W. Bush. As of November 2010, the reasons for and consequences of the Russia-Georgia war continue to be contested. My thesis demonstrates that there were already a number of different stories about the conflict immediately after the outbreak of hostilities. I want to argue that among these stories one can discern a “neoconservative narrative” that described the war as a confrontation between the East and the West and considered it as a test for Washington’s global leadership. I draw on the theory of securitization, particularly on a framework introduced by Holger Stritzel. Accordingly, I consider statements about the conflict as “threat texts” and analyze these based on the existing discursive context, the performative force of the threat texts and the positional power of the actors presenting them. My thesis suggests that a notion of narrativity can complement Stritzel’s securitization framework and take it further. Threat texts are established as narratives by attaching causal connections, meaning and actorship to the discourse. By focusing on this process I want to shed light on the relationship between the text and the context, capture the time dimension of a speech act articulation and help to explain how some interpretations of the conflict are privileged and others marginalized. I develop the theoretical discussion through an empirical analysis of the neoconservative narrative. Drawing on Stritzel’s framework, I argue that the internal logic of the narrative which was presented as self-evident can be analyzed in its historicity. Asking what was perceived to be at stake in the conflict, how the narrative was formed and what purposes it served also reveals the possibility for alternative explanations. My main source material consists of transcripts of think tank seminars organized in Washington, D.C. in August 2008. In addition, I resort to the foreign policy discussion in the mainstream media.

Search for the associated production of the standard-model Higgs boson in the all-hadronic channel

"We report on a search for the standard-model Higgs boson in pp collisions at s=1.96 TeV using an integrated luminosity of 2.0 fb(-1). We look for production of the Higgs boson decaying to a pair of bottom quarks in association with a vector boson V (W or Z) decaying to quarks, resulting in a four-jet final state. Two of the jets are required to have secondary vertices consistent with B-hadron decays. We set the first 95% confidence level upper limit on the VH production cross section with V(-> qq/qq('))H(-> bb) decay for Higgs boson masses of 100-150 GeV/c(2) using data from run II at the Fermilab Tevatron. For m(H)=120 GeV/c(2), we exclude cross sections larger than 38 times the standard-model prediction."

Measurement of the top quark mass and pp̅ →tt̅ cross section in the all-hadronic mode with the CDF II detector

We present a measurement of the top quark mass and of the top-antitop pair production cross section using p-pbar data collected with the CDFII detector at the Tevatron Collider at the Fermi National Accelerator Laboratory and corresponding to an integrated luminosity of 2.9 fb-1. We select events with six or more jets satisfying a number of kinematical requirements imposed by means of a neural network algorithm. At least one of these jets must originate from a b quark, as identified by the reconstruction of a secondary vertex inside the jet. The mass measurement is based on a likelihood fit incorporating reconstructed mass distributions representative of signal and background, where the absolute jet energy scale (JES) is measured simultaneously with the top quark mass. The measurement yields a value of 174.8 +- 2.4(stat+JES) ^{+1.2}_{-1.0}(syst) GeV/c^2, where the uncertainty from the absolute jet energy scale is evaluated together with the statistical uncertainty. The procedure measures also the amount of signal from which we derive a cross section, sigma_{ttbar} = 7.2 +- 0.5(stat) +- 1.0 (syst) +- 0.4 (lum) pb, for the measured values of top quark mass and JES.

Search for the associated production of the standard-model Higgs boson in the all-hadronic channel

"We report on a search for the standard-model Higgs boson in pp collisions at s=1.96 TeV using an integrated luminosity of 2.0 fb(-1). We look for production of the Higgs boson decaying to a pair of bottom quarks in association with a vector boson V (W or Z) decaying to quarks, resulting in a four-jet final state. Two of the jets are required to have secondary vertices consistent with B-hadron decays. We set the first 95% confidence level upper limit on the VH production cross section with V(-> qq/qq('))H(-> bb) decay for Higgs boson masses of 100-150 GeV/c(2) using data from run II at the Fermilab Tevatron. For m(H)=120 GeV/c(2), we exclude cross sections larger than 38 times the standard-model prediction."

A split cassette attachment for recording all the reflections on the upper level Weissenberg photographs either as elongated or as contracted spots

A split-cassette arrangement has been incorporated in the Weissenberg camera for recording all reflections on the upper level photographs either as elongated or as contracted spots. This arrangement employs two semicylindrical cassettes which are separated by a horizontal plane. These half-cassettes are translated in opposite directions. A suitable split-cassette attachment has been constructed for the Unicam Weissenberg goniometer S-35 The subject of 'displaced-film' Weissenberg photograph is also discussed.

Design of rectangular reinforced concrete slabs supported on all the sides with a short discontinuous edge

Bending moment coefficients for the design of rectangular reinforced concrete panels supported on four sides with a short discontinuous edge are derived using the strip theory. The moment fields resulting from the use of proposed coefficients are examined in terms of the moment volume for possible savings in reinforcement and compared with other codified procedures. The strip coefficients averaged over the corresponding sides of the panel, besides resulting in considerable savings in reinforcement, are found to be identical with the coefficients predicted by simple yield line theory using an orthotropic layout of reinforcement.

Top quark mass measurement in the tt̅ all hadronic channel using a matrix element technique in pp̅ collisions at √s=1.96 TeV

We present a measurement of the top quark mass in the all-hadronic channel (\tt $\to$ \bb$q_{1}\bar{q_{2}}q_{3}\bar{q_{4}}$) using 943 pb$^{-1}$ of \ppbar collisions at $\sqrt {s} = 1.96$ TeV collected at the CDF II detector at Fermilab (CDF). We apply the standard model production and decay matrix-element (ME) to $\ttbar$ candidate events. We calculate per-event probability densities according to the ME calculation and construct template models of signal and background. The scale of the jet energy is calibrated using additional templates formed with the invariant mass of pairs of jets. These templates form an overall likelihood function that depends on the top quark mass and on the jet energy scale (JES). We estimate both by maximizing this function. Given 72 observed events, we measure a top quark mass of 171.1 $\pm$ 3.7 (stat.+JES) $\pm$ 2.1 (syst.) GeV/$c^{2}$. The combined uncertainty on the top quark mass is 4.3 GeV/$c^{2}$.