Mechanical and tribological properties of PVD-coated cemented carbide as evaluated by a new multi-pass scratch testing method

A new test method based on multipass scratch testing has been developed for evaluating the mechanical and tribological properties of thin, hard coatings. The proposed test method uses a pin-on-disc tribometer and during testing a Rockwell C diamond stylus is used as the “pin” and loaded against the rotating coated sample. The influence of normal load on the number of cycles to coating damage is investigated and the resulting coating damage mechanisms are evaluated by posttest scanning electron microscopy. The present study presents the test method by evaluating the performance of Ti0.86Si0.14N, Ti0.34Al0.66N, and (Al0.7Cr0.3)2O3 coatings deposited by cathodic arc evaporation on cemented carbide inserts. The results show that the test method is quick, simple, and reproducible and can preferably be used to obtain relevant data concerning the fatigue, wear, chipping, and spalling characteristics of different coating-substrate composites. The test method can be used as a virtually nondestructive test and, for example, be used to evaluate the fatigue and wear resistance as well as the cohesive and adhesive interfacial strength of coated cemented carbide inserts prior to cutting tests.

Microstructural, Mechanical and Tribological Characterisation of CVD and PVD Coatings for Metal Cutting Applications

The present thesis focuses on characterisation of microstructure and the resulting mechanical and tribological properties of CVD and PVD coatings used in metal cutting applications. These thin and hard coatings are designed to improve the tribological performance of cutting tools which in metal cutting operations may result in improved cutting performance, lower energy consumption, lower production costs and lower impact on the environment.  In order to increase the understanding of the tribological behaviour of the coating systems a number of friction and wear tests have been performed and evaluated by post-test microscopy and surface analysis. Much of the work has focused on coating cohesive and adhesive strength, surface fatigue resistance, abrasive wear resistance and friction and wear behaviour under sliding contact and metal cutting conditions. The results show that the CVD deposition of accurate crystallographic phases, e.g. α-Al2O3 rather than κ-Al2O3, textures and multilayer structures can increase the wear resistance of Al2O3. However, the characteristics of the interfaces, e.g. topography as well as interfacial porosity, have a strong impact on coating adhesion and consequently on the resulting properties.  Through the deposition of well designed bonding and template layer structures the above problems may be eliminated. Also, the presence of macro-particles in PVD coatings may have a significant impact on the interfacial adhesive strength, increasing the tendency to coating spalling and lowering the surface fatigue resistance, as well as increasing the friction in sliding contacts. Finally, the CVD-Al2O3 coating topography influences the contact conditions in sliding as well as in metal cutting. In summary, the work illuminates the importance of understanding the relationships between deposition process parameters, composition and microstructure, resulting properties and tribological performance of CVD and PVD coatings and how this knowledge can be used to develop the coating materials of tomorrow.

A Mismatch-Based Model for Memory Reconsolidation and Extinction in Attractor Networks

OSAN, R. , TORT, A. B. L. , AMARAL, O. B. . A mismatch-based model for memory reconsolidation and extinction in attractor networks. Plos One, v. 6, p. e23113, 2011.

Performance of aerodynamic baffles in cylindrical grinding analyzed on the basis of air layer pressure and speed

Over the years, grinding has been considered one of the most important manufacturing processes. Grinding is a high precision process, and the loss of a single workpiece in this stage of the production is unacceptable, fir the value added to the material is very high due to many processes it has already undergone prior to grinding. This study aims to contribute toward the development of an experimental methodology whereby the pressure and speed of the air layer produced by the high rotation of the grinding wheel is evaluated with and without baffles, i.e., in an optimized grinding operation and in a traditional one. Tests were also carried out with steel samples to check the difference in grinding wheel wear with and without the use of baffles.

Si3N4 ceramic cutting tool sintered with CeO2 and Al2O3 additives with AlCrN coating

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

NEST REUSE AND COMMUNAL NESTING IN MICROTHURGE-CORUMBAE (HYMENOPTERA, MEGACHILIDAE), WITH SPECIAL REFERENCE TO NEST DEFENSE

Observations on the nesting activities of Microthurge corumbae, carried out at the University Campus of Ribeirao Preto, São Paulo, Brazil, from 1977 to 1981, indicated that 61.9% of nests were re-used by succeeding generations. Re-use by one generation was more frequent than by two generations, and re-use by a third was observed only once. Nests were re-used by one or several females. Single females were more frequently in the first re-use. In these cases nest re-use did not differ essentially from the solitary foundation of a new nest, except for the adoption of a pre-existing nest without excavation. In multifemale nests, analysis of relative age (wing wear), ovarian and spermathecal conditions of associated females and the content of nests at excavation indicated that the social pattern in such colonies is communal. There is some evidence that the associated females are relatives. The chalcidoid wasp Leucospis was the principal nest parasite, and ants of the genus Crematogaster were nest predators. In multifemale nests, the rate of parasitism was significantly lower than in solitary nests, indicating that nest-sharing resulted in improved nest defense. on the other hand. The absence of predation on immatures of the first generation of M. corumbue in multifemale nests suggests that such nests are also more resistant to attack by predators.

Comparative study on turning CI and CGI using silicon nitride cutting tools

There has been a great interest for improving the machining of cast iron materials in the automotive and other industries. Comparative studies for tool used to machine grey cast iron (CI) and compacted graphite iron (CGI) on dry machining were also performed in order to find out why in this case the tool lifetime is not significantly higher. However the machining these materials while considering turning with the traditional high-speed steel and carbide cutting tools present any disadvantages. One of these disadvantages is that all the traditional machining processes involve the cooling fluid to remove the heat generated on workpiece due to friction during cutting. This paper present a new generation of ceramic cutting tool exhibiting improved properties and important advances in machining CI and CGI. The tool performance was analyzed in function of flank wear, temperature and roughness, while can be observed that main effects were found for tool wear, were abrasion to CI and inter-diffusion of constituting elements between tool and CGI, causing crater. However the difference in tool lifetime can be explained by the formation of a MnS layer on the tool surface in the case of grey CI. This layer is missing in the case of CGI.

Financing for sustainable development: visions and proposals for action from a Latin American and Caribbean perspective

Foreword Throughout the preparatory process for the World Summit on Sustainable Development and at the Summit itself, which was held in Johannesburg, South Africa, from 26 August to 4 September 2002, discussions were dominated by one central concern: the need to define and reach consensus on concrete, quantitative goals, with fixed deadlines for implementation, which were to supplement the Millennium Development Goals and facilitate progress towards an effective transition to sustainable development. Participants at the Summit explicitly affirmed the need, as a matter of urgency, to identify the financial and technical resources whereby sustainable development would become a reality and benefit directly and particularly rural and urban communities in the developing countries. The document we are now presenting is the outcome of extensive discussions held at a high-level forum during the Johannesburg Summit. Led by representatives of the Government of Mexico, the Economic Commission for Latin America and the Caribbean (ECLAC), the United Nations Development Programme (UNDP) and the Andean Development Corporation, those discussions were based on the ECLAC/UNDP study entitled Financing for sustainable development in Latin America and the Caribbean: from Monterrey to Johannesburg, which considers the opportunities and challenges for improving prospects for investment and financing for sustainable development and underscores the need to establish a new balance between the market economy and public interest through joint public/private initiatives that combine market innovation, social responsibility and appropriate regulations. Other eminent persons attending the event included heads of State, such as Gustavo Noboa, then President of Ecuador; Enrique V. Iglesias, President of the Inter-American Development Bank (IDB); José María Figueres, Managing Director of the Global Agenda of the World Economic Forum and former President of Costa Rica; and Gro Harlem Brundtland, the legendary figure who pioneered sustainable development. Valuable contributions to the discussions were made by Yolanda Kakabadse, President of the World Conservation Union; Xóchitl Gálvez Ruiz, head of the Unit for the Development of Indigenous Peoples of the Office of the President of Mexico; Cecilia López, former Minister for the Environment of Colombia; and Juan Carlos Maqueda, then Vice President of Argentina. The views emerging from the forum as set forth in this document are designed to facilitate and promote application of the Plan of Implementation of the World Summit on Sustainable Development within the framework of the Millennium Development Goals and the commitments assumed at the International Conference on Financing for Development, which was held in Monterrey, Mexico. We also aspire to continue moving forward with the adoption of measures and policies to increase investment and financing for sustainable development as well as to foster partnerships between the public and private sectors and nongovernmental organizations. We recognize, in this context, the importance of strengthening and improving public and private institutions in order to meet the operational needs associated with the effort to achieve the Millennium Development Goals and pursue the Plan of Implementation formulated in Johannesburg. We trust that this document will contribute to in-depth discussions on the application of the Plan of Implementation in the relevant forums, in particular the United Nations Commission on Sustainable Development. The Plan of Implementation of the World Summit on Sustainable Development opens up new opportunities for Latin America and the Caribbean to renew and revive their own regional agenda -with emphasis on global and especially regional public goods- and to interweave it more cohesively with the global agenda in order to promote the common interests of Latin America and the Caribbean more forcefully in international development forums. The regional agenda and the global agenda cannot be separated in a contrived manner; indeed, to an increasing degree, what we are witnessing are global environmental processes which call for action at the local level. The achievement of sustainable development in Latin America and the Caribbean, where the necessary economic, social, environmental and geopolitical conditions are combined, requires a subtle balance between the market economy, the State and the citizen. Such a balance will result in the consolidation of democratic governance in the service of human development. VICENTE FOX President of Mexico JOSÉ ANTONIO OCAMPO Executive Secretary, Economic Commission for Latin America and the Caribbean (ECLAC) ELENA MARTÍNEZ Assistant Aministrator and Regional Director for Latin America and the Caribbean of the United Nations Development Programme (UNDP) ENRIQUE GARCÍA Executive President, Andean Development Corporation (ADC)""

Fiscal Panorama of Latin America and the Caribbean 2013: tax reform and renewal of the fiscal covenant

Includes bibliography

Effects of high temperature plasma immersion ion implantation on wear resistance of Ti-Si-B sintered alloys

Although titanium and its alloys own good mechanical properties and excellent corrosion resistance, these materials present poor tribological properties for specific applications that require wear resistance. In order to produce wear-resistant surfaces, this work is aimed at achieving improvement of wear characteristics in Ti-Si-B alloys by means of high temperature nitrogen plasma immersion ion implantation (PIII). These alloys were produced by powder metallurgy using high energy ball milling and hot pressing. Scanning electron microscopy (SEM) and X-ray diffraction identified the presence of α-titanium, Ti6Si2B, Ti5Si3, TiB and Ti3Si phases. Wear tests were carried out with a ball-on-disk tribometer to evaluate the friction coefficient and wear rate in treated and untreated samples. The worn profiles were measured by visible light microscopy and examined by SEM in order to determine the wear rates and wear mechanisms. Ti-7.5Si-22.5B alloy presented the highest wear resistance amongst the untreated alloys produced in this work. High temperature PIII was effective to reduce the wear rate and friction coefficient of all the Ti-Si-B sintered alloys. © 2013 Elsevier B.V.

Tax policy in Latin America: Assessment and guidelines for a second generation of reforms

Includes bibliography

Effect of Nintendo Wii (TM)-based motor and cognitive training on activities of daily living in patients with Parkinson's disease: A randomised clinical trial

Objectives To investigate the effect of Nintendo Wii (TM)-based motor cognitive training versus balance exercise therapy on activities of daily living in patients with Parkinson's disease. Design Parallel, prospective, single-blind, randomised clinical trial. Setting Brazilian Parkinson Association. Participants Thirty-two patients with Parkinson's disease (Hoehn and Yahr stages 1 and 2). Interventions Fourteen training sessions consisting of 30 minutes of stretching, strengthening and axial mobility exercises, plus 30 minutes of balance training. The control group performed balance exercises without feedback or cognitive stimulation, and the experimental group performed 10 Wii Fit (TM) games. Main outcome measure Section II of the Unified Parkinson's Disease Rating Scale (UPDRS-II). Randomisation Participants were randomised into a control group (n = 16) and an experimental group (n = 16) through blinded drawing of names. Statistical analysis Repeated-measures analysis of variance (RM-ANOVA). Results Both groups showed improvement in the UPDRS-II with assessment effect (RM-ANOVA P < 0.001, observed power = 0.999). There was no difference between the control group and the experimental group before training {8.9 [standard deviation (SD) 2.9] vs 10.1 (SD 3.8)}, after training [7.6 (SD 2.9) vs 8.1 (SD 3.5)] or 60 days after training [8.1 (SD 3.2) vs 8.3 (SD 3.6)]. The mean difference of the whole group between before training and after training was -0.9 (SD 2.3, 95% confidence interval -1.7 to -0.6). Conclusion Patients with Parkinson's disease showed improved performance in activities of daily living after 14 sessions of balance training, with no additional advantages associated with the Wii-based motor and cognitive training. Registered on http://www.clinicaltrials.gov (identifier: NCT01580787). (C) 2012 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Frontal Plane Biomechanics in Males and Females with and without Patellofemoral Pain

NAKAGAWA, T. H., E. T. U. MORIYA, C. D. MACIEL, and F. V. SERRAO. Frontal Plane Biomechanics in Males and Females with and without Patellofemoral Pain. Med. Sci. Sports &ere., Vol. 44, No. 9, pp. 1747-1755, 2012. Purpose: The study's purpose was to compare trunk, pelvis, hip, and knee frontal plane biomechanics in males and females with and without patellofemoral pain syndrome (PFPS) during stepping. Methods: Eighty recreational athletes were equally divided into four groups: female PFPS, female controls, male PFPS, and male controls. Trunk, pelvis, hip, and knee frontal plane kinematics and activation of the gluteus medius were evaluated at 15 degrees, 30 degrees, 45 degrees, and 60 degrees of knee flexion during the downward and upward phases of the stepping task. Isometric hip abductor torque was also evaluated. Results: Females showed increased hip adduction and knee abduction at all knee flexion angles, greater ipsilateral trunk lean and contralateral pelvic drop from 60 degrees of knee flexion till the end of the stepping task (P = 0.027-0.001), diminished hip abductor torque (P < 0.001), and increased gluteus medius activation than males (P = 0.008-0.001). PFPS subjects presented increased knee abduction at all the angles evaluated; greater trunk, pelvis, and hip motion from 45 of knee flexion of the downward phase till the end of the maneuver; and diminished gluteus medius activation at 60 degrees of knee flexion, compared with controls (P = 0.034-0.001). Females with PFPS showed lower hip abductor torque compared with the other groups. Conclusions: Females presented with altered frontal plane biomechanics that may predispose them to knee injury. PFPS subjects showed frontal plane biomechanics that could increase the lateral patellofemoral joint stress at all the angles evaluated and could increase even more from 45 degrees of knee flexion in the downward phase untill the end of the maneuver. Hip abductor strengthening and motor control training should be considered when treating females with PFPS.

WEAR OF MATRIX OVERDENTURE ATTACHMENTS AFTER ONE TO EIGHT YEARS OF CLINICAL USE

Statement of problem. Matrices of unsplinted attachment systems are generally reported to be the weak component of implant overdentures, often requiring frequent maintenance. Clinical wear results in reduced retention of the prosthesis, requiring activation or renewal of the matrix to restore the initial level of retention. Purpose. The purpose of this retrospective study was to measure the wear of the matrix of a ball attachment after various periods of clinical wear. Material and methods. Seventy specimens of 3 groups of matrices of ball attachments that had been in use for mean periods of 12.3 months (1Y group, n=26), 39.0 months (3Y group, n=28) and 95.6 months (8Y group, n=16) were retrieved from 35 patients (2 specimens per patient) and measured on a coordinate measuring machine equipped with a touch trigger probe. Ten unused matrices were used as controls (CTRL group). The external and internal matrix diameters and deviations from circularity were measured. For the various time periods, the decreases in matrix thickness were calculated and compared with controls. Kruskal-Wallis 1-way ANOVA by ranks, followed by the Mann-Whitney post hoc tests, were conducted to test for differences in median values among groups (alpha=.05). Results. For the internal upper diameter of the matrices tested, the Kruskal-Wallis and Mann-Whitney tests revealed significant differences for the 3 groups compared to the controls. For group 1Y, a significant difference (P<.001) of the internal upper diameter was found compared to the CTRL group. Compared to the controls, the nonparametric analyses for groups 3Y and 8Y showed significant differences for the internal upper diameter (P<.001) and deviations from circularity (P<.001). For groups 1Y, 3Y and 8Y, matrix thickness losses were 07, 47 and 70 pm, respectively. Conclusions. Within the limitations of this study, it was observed that one year of clinical wear had limited effect on the ball attachment matrices. Three to 8 years of clinical use resulted in a significant decrease of matrix thickness, especially at the tip of the retentive lamellae. (J Prosthet Dent 2012;107:191-198)

Decadal Variabilities and Trends in the Southwest Atlantic in a model forced with NCEP Reanalysis from 1960 to 2012

Analysis of the NCAR/NCEP Reanalysis show changes in the atmospheric circulation in the Southern hemisphere, with a strengthening and poleward displacement of the westerlies. Because the wind is one of the main sources of the ocean's kinetic energy, a numerical experiment with the Hybrid Coordinate Ocean Model (HYCOM) was forced with monthly means of the NCAR/NCEP Reanalysis products to investigate the effects of the changes in the wind on the ocean circulation in a geographical domain defined by 98W – 114E; 65S – 60N. The results show good agreement with other models and with available satellite data. In the western sector of the South Atlantic there are several indications of changes such as a poleward displacement of the Brazil-Malvinas Confluence and positive trends in temperature and salinity of the southwestern region of the subtropical gyre