Assessing the production of jet mix columns using alkali activated waste based on mechanical and financial performance and CO2 (eq) emissions

Recent research has proved the potential of alkaline activated fly-ash for soil stabilisation. However, such studies have not focused on the link between financial, mechanical and environmental aspects of this solution, but only on their absolute mechanical properties. The present paper characterises the mechanical behaviour of a large spectrum of activator-ash-soil combinations used to build jet mixing columns, analysing also the cost and CO2 (eq) emissions. The concern with these two vectors forced a decrease in the quantity of stabilising agent added to the soil, relatively to previous research, and the effects of such low quantities have not yet been published. However, the results clearly showed a significant improve in strength, still well above the average values expected when improving the stressstrain behaviour of a weak soil. Uniaxial compressive strength tests were used to assess the effects of the fly-ash percentage, the alkalieash ratio and the water content. The carbon calculator recently developed by the European Federation of Foundation Contractors and the Deep Foundations Institute was used to quantify the CO2 (eq) emissions associated with this technique. The financial cost was estimated based on the experience of a major Portuguese contractor. For comparison purposes, soil cement mixtures were also analysed, using similar conditions and tools used for the soil-ash analysis. Results showed that the cement and ash solutions are very similar in terms of overall performance, with some advantage of the former regarding financial cost, and a significant advantage of the latter regarding the CO2 (eq) emissions. This new grout, although it is in an embryonic stage, it has the potential for broader developments in the field.

Removal of Erythrosine B dye from water effluents using crop waste pumpkin seed hulls as adsorbent

Erythrosine B is widely used for coloring in various applications, especially in the food industry, despite its already proved toxicity and carcinogenicity. The agrowaste pumpkin seed hulls were applied as potential adsorbent for the removal of Erythrosine from aqueous solutions. Adsorption mechanism and kinetics were analyzed for design purposes. The seed hulls were characterized by specific techniques before and after dye retention. It was found that the attachment of Erythrosine B molecules on adsorbent surface may be attributed to the interactions between carboxyl and/or carbonyl groups of both dye and agrowaste wall components. A univariate approach followed by a factorial design was applied to study and analyze the experimental results as well as to estimate the combined effects of the process factors on the removal efficiency and dye uptake. Adsorption mechanism may be predominantly due to intraparticle diffusion, dependent on pore size. The four equilibrium models applied fitted the data well; the maximum adsorption capacity for Erythrosine was 16.4 mg/g. The results showed that adsorbent is effective for Erythrosine B removal for a large concentration range in aqueous solutions (5400 mg/L) in batch systems.

Processing and characterization of plates made from granulate of waste electrical cables

This article is intended to evaluate the density and the mechanical, acoustic and thermal properties of compression moulded plates composed of granulate from electrical cables wastes. Those cable wastes are the insulation part from the electric cables, and are composed of PVC, PE, EMP and PEX rubber. After these materiais lose their initial properties and cease to be useful as insulation material, due to safety requirements, it is possible to reuse them into new applications like industrial or playground floorings, as sound insulation material to be applied in walls or floors, or to dampen vibrations from equipments. Recovering electric cable waste has been a major concern to the European Commission due to its leveis of toxicity when incineration and land fill ing is the solution to dispose this material. Such as the European Commission's study for DG Xl[1] suggested that recycling may be the most favourable future waste management option.

New approach on the bioconversion of vineyard pruning waste into surface-active compounds by Lactobacillus paracasei

Strategic funding of UID/BIO/04469/2013 unit and project ref RECI/BBB-EBI/0179/2012 (project number FCOMP-01-0124-FEDER-027462) and Xanel Vecino post-doctoral grant (ref SFRH/BPD/101476/2014) funded by Fundação para a Ciência e a Tecnologia, Portugal

Polyphenols and sugars recovery from autohydrolysis of pineapple waste

[Excerpt] The aim of this research was to evaluate the influence of temperature, time and mass/ volume ratio on the release of sugars and polyphenols using an autohydrolysis procedure from pineapple waste. A Box-Bhenken design was used with three factors (time, temperature and mass/volume ratio) and three levels was used. All treatments were performed in triplicate. Nine central points were used. For autohydrlosysis treatments, an oil bath was used [1]. After autohydrolysis, liquid phases or hydrolysates were analyzed for glucose and fructose concentration by high performance liquid chromatography (HPLC) [2]. The FolinCiocalteu assay was used to measure total polyphenols of hydrolysates [3] and HPLC to identify these molecules [4]. (...)

Biotechnological valorization of waste cooking oils: lipase and microbial lipids production by Yarrowia lipolytica

[Excerpt] Waste cooking oils (WCO) generated from vegetable oils used at high temperatures in food frying, cause environmental problems and must be reutilized. New strategies to valorize these wastes are attracting a great scientific interest due to the important advantages offered from an economic and environmental point of view. A microbial platform can be established to convert low-value hydrophobic substrates, such as waste cooking oils, to microbial lipids (single cell oil, SCO) and other value-added bioproducts, such as lipase. (...)

Implementing a site waste management plan: a case study of a medium sized building contractor in Ireland

Construction and demolition waste management is becoming increasingly important on construction sites as landfill space in Ireland is rapidly depleting and waste management costs are rising. Due to these factors waste management plans are seen as a good response to minimising waste on site and this thesis aims to investigate how to implement such a plan on a practical case study as well as investigating the legislation regarding construction and demolition waste along with market availability for the reuse of the waste. Main contractor surveys were also carried out in order to gain a better understanding of current attitudes within the industry and these surveys are analysed in chapter five. A survey was also carried out among sub-contractors but this survey has not been used for this thesis as the study is on-going. The primary aim of this thesis is to examine the waste hierarchy opportunities that are available for construction and demolition waste in Ireland and to examine the effects of management strategies on construction and demolition waste reduction at the project level. A partnership was developed with Carey Developments Ltd in Co. Galway and an analysis of their waste management practices was undertaken. The primary case study will be the ‘Taylors Hill’ project in Co. Galway where work commenced in March, 2012. The secondary aim of the thesis is to develop specific waste minimisation strategies for the company and to develop a training tool kit for use on site.

Ireland's biodegradable municipal waste

This project focuses on the EU Landfill Directive targets for Biodegradable Municipal Waste (BMW) specifically focusing on how the targets will affect Ireland and its waste management infrastructure. Research will consist of reviewing relevant literature, legislation and policies that will provide a comparable between Ireland and other nations. Planning processes which govern both the building structure and running capacities of treatment facilities is also necessary in order to predict amounts of waste diverted from landfill. The efficiency of these treatment plants also requires investigation. Another objective is to research further information on Irelands organic ‘brown’ bin service, this will involve discovering the roll out of bins in the future over a defined time scale as well as the potential amounts of waste that will be collected. Figures received from waste management and waste treatment companies will be combined with figures from the Environmental Protection Agency’s (EPA) annual reports. This will give an indication to past trends and shed light on possible future trends. With this information annul waste volumes consigned to landfill can be calculated and used to determine whether or not Ireland can achieve the EU Landfill Directive targets. Without significant investment in Irelands waste management infrastructure it is unlikely that the targets will be met. Existing waste treatment facilities need to be managed as efficiently as possible. Waste streams must also be managed so waste is shared appropriately between companies and not create a monopolising waste treatment facility. The driving forces behind an efficient waste management infrastructure are government policy and legislation. An overall and efficient waste management strategy must be in place, along with disincentives for landfilling of waste such as the landfill levy. Encouragement and education of the population is the fundamental and first step to achieving the landfill directive targets.

Energy from waste (EfW): a feasibility study on the economic and the environmental co-benefits of biogas production within rural communities

Energy from waste (E/W) technologies in the form o f biogas plants, CHP plants and other municipal solid waste (MSW) conversion technologies, have been gaining steady ground in the provision o f energy throughout Europe and the UK. Urban Waste Water Treatment Plants (UWWTP) are utilising much o f the same biochemical processes common to these E/W plants. Previous studies on Centralised Anaerobic Digestion (CAD) within Ireland found that the legislative and economic conditions were not conducive to such an operation on the grounds o f low energy price for electric and heat energy, and due to the restrictive nature o f the allowable feedstocks. Recent changes to the Irish REFIT tariff on energy produced from Anaerobic digestion; alterations to the regulation o f the allowable use o f animal by products(ABP); the recent enactment o f the Renewable Energy D irective (09/28/EC) and a subsequent review o f the draft Biowaste Directive (2001) required that the issue o f decentralised energy production in Ireland be reassessed. In this instance the feasibility study is based on a extant rural community, centred around the village o f Woodford Co Galway. The review found that the prevailing conditions were now such that it was technically and economically feasible for this biochemical process to provide energy and waste treatment facilities at the above location. The review also outlines the last item which is preventing this process from becoming achievable, specifically the lack o f a digestate regulation on land spreading which deals specifically with biowaste. The study finds that the implementation o f the draft EU biowaste regulations, with amendments for Cr and Hg levels to match the proposed Irish regulation for compost, would ensure that Ireland has some o f the most restrictive regulations in Europe for this application. The delay in completing this piece o f legislation is preventing national energy and waste issues from being resolved in a planned and stepwise fashion. A proposed lay out for the new Integrated Waste from Energy Plant (IW/EP) is presented. Budget economic projections and alternative revenue streams are outlined. Finally a review o f the national policies regarding the Rural Development Plan (RDP), the Rural Planning Guidelines (RPG) and the National Renewable Energy Action Plan (NREAP) are examined against the relevant EU directives.

An analysis of the use of photogrammetric sorting to audit construction and demolition waste production on site

This study analyses the area of construction and demolition waste (C & D W) auditing. The production of C&DW has grown year after year since the Environmental Protection Agency (EPA) first published a report in 1996 which provided data for C&D W quantities for 1995 (EPA, 1996a). The most recent report produced by the EPA is based on data for 2005 (EPA, 2006). This report estimated that the quantity of C&DW produced for that period to be 14 931 486 tonnes. However, this is a ‘data update’ report containing an update on certain waste statistics so any total provided would not be a true reflection of the waste produced for that period. This illustrates that a more construction site-specific form of data is required. The Department of Building and Civil Engineering in the Galway-Mayo Institute of Technology have carried out two recent research projects (Grimes, 2005; Kelly, 2006) in this area, which have produced waste production indicators based on site-specific data. This involved the design and testing of an original auditing tool based on visual characterisation and the application of conversion factors. One of the main recommendations of these studies was to compare this visual characterisation approach with a photogrammetric sorting methodology. This study investigates the application of photogrammetric sorting on a residential construction site in the Galway region. A visual characterisation study is also carried out on the same project to compare the two methodologies and assess the practical application in a construction site environment. Data collected from the waste management contractor on site was also used to provide further evaluation. From this, a set of waste production indicators for new residential construction was produced: □ 50.8 kg/m2 for new residential construction using data provided by the visual characterisation method and the Landfill Levy conversion factors. □ 43 kg/m2 for new residential construction using data provided by the photogrammetric sorting method and the Landfill Levy conversion factors. □ 23.8 kg/m2 for new residential construction using data provided by Waste Management Contractor (WMC). The acquisition of the data from the waste management contractor was a key element for testing of the information produced by the visual characterisation and photogrammetric sorting methods. The actual weight provided by the waste management contractor shows a significant difference between the quantities provided.

Development of a rehabilitation system for the red mud waste generated at the Aughinish Alumina Bayer Plant

Aughinish Alumina Limited (AAL) have an obligation by terms of their Integrated Pollution Control Licence (IPCL) and Planning Permission to establish vegetation on the red mud stack at their plant at Aughinish, Co. Limerick. High pH and high exchangeable sodium percentage are the main known factors limiting the establishment of vegetation on red mud. Gypsum addition has been known to assist in alleviating these problems in other countries. However, there is no experience or published information on red mud rehabilitation under Irish conditions. Red mud with organic and inorganic waste-derived ameliorants as well as selected grassland species were examined under laboratory controlled environment conditions as well as in field plot trials. Also, in order that it would be economically achievable, the research utilised locally available waste products as the organic amendments. Screening trials found that physical constraints severely limit plant germination and growth in red mud. Gypsum addition effectively lowers pH, exchangeable sodium percentage and the availability of A1 and Fe in the mud. A strong relationship between pH, ESP and A1 levels was also found. Gypsum addition increased germination percentages and plant growth for all species investigated. Greenhouse trials demonstrated that organic wastes alone did not greatly improve conditions for plant growth but when used in conjunction with gypsum plant performances for all species investigated was significantly increased. There was a high mortality rate for grasses in non-gypsum treatments. An emerging trend of preferential iron uptake and calcium deficiency in non-gypsum treatments was found at pot screening stage. Species also displayed manganese and magnesium deficiencies.

Patrimoine et tourisme urbain : la valorisation de l'authenticité à Lyon et Pékin

Le tourisme est au coeur des processus de valorisation des territoires urbains. Le patrimoine - pilier majeur de la touristification - tend à prendre un caractère marchand, en tant que produit à valoriser économiquement dans un contexte de villes en compétition. À partir de l'analyse de deux centres urbains en mutations - Lyon et Pékin -, cette recherche montre d'une part l'usage marchand du patrimoine, produit et mobilisé par les pouvoirs publics. D'autre part, ce papier questionne la notion d'authenticité - centrale dans les discours sur la mise en valeur du patrimoine. Apparaissant comme inopérante du point de vue heuristique, nous faisons l'hypothèse qu'elle détient une dimension proprement « fétiche », concourant à la perception déformée de la réalité des rapports sociaux en jeu dans la production patrimoniale.

Responsibility for regional waste generation: A single region extended input-output analysis with uni-directional trade flows

The paper uses a regional input-output (IO) framework and data derived on waste generation by industry to examine regional accountability for waste generation. In addition to estimating a series of industry output-waste coefficients, the paper considers two methods for waste attribution but focuses first on one (trade endogenised linear attribution system (TELAS)) that permits a greater focus on private and public final consumption as the main exogenous driver of waste generation. Second, the paper uses a domestic technology assumption (DTA) to consider a regional ‘waste footprint’ where local consumption requirements are assumed to be met through domestic production.

Italy's urban waste metabolism

The problem of waste management is causing growing concern due to increasing generation rates, the emissions into soil, water and air, the social conflicts derived from the election of disposal sites and the loss of resources and energy among others. In this work, an innovative methodology is used to enable a better understanding of the waste generation and management system in Italy. Two new waste indicators are built to complement the conventional indicators used by official statistics. Then a multi-scale analysis of the Density of Waste Disposed (DWD) is carried out to highlight the territorial diversity of waste performances and test its contribution to detect plausible risky areas. Starting from Italian regions, the scale down goes on to the provincial level and, only for the region of Campania, the municipal one. First, the analysis shows that the DWD is able to complement the information provided by the conventional waste indicators. Second, the analysis shows the limitations of using a unique institutional solution to waste management problems. In this sense the multi-scale analysis provides with a more realistic picture of Italian waste system than using a single scale.

Les symbioses industrielles : une nouvelle stratégie pour l'amélioration de l'utilisation des ressources matérielles et énergétiques par les activités économiques

RésuméCette thèse traite d'un domaine d'application de l'écologie industrielle, les symbioses industrielles, comme stratégie d'amélioration de la consommation des ressources matérielles et énergétiques et de la gestion des déchets par les activités économiques. Les symbioses industrielles cherchent à créer de nouvelles collaborations directement entre les acteurs économiques d'un territoire dans le but d'échanger de l'information, des matières premières et des déchets, et d'intensifier les mutualisations de services et d'infrastructures possibles entre entreprises voisines. Ces quatre types de collaboration sont représentés schématiquement dans la figure ci-dessous.Dans ce travail, la détection et la mise en oeuvre de symbioses industrielles sont abordées sous plusieurs angles. Les recherches réalisées concernent le développement de procédures de mise en oeuvre s'adressant aux collectivités publiques, aux institutions académiques et aux bureaux de conseil dans le domaine de l'environnement. Les objectifs des procédures sont de créer une dynamique de collaboration et de confiance entre les acteurs économiques et l'administration publique d'un territoire afin de détecter des symbioses industrielles potentielles. Ces procédures requièrent la gestion de grandes quantités d'informations relatives aux flux de matière et d'énergie.Un travail de terrain, réalisé sur les territoires du canton de Genève et de Lausanne Région et utilisé comme études de cas, a permis de mettre en évidence un grand nombre de symbioses industrielles qui existent déjà en Suisse romande. Plusieurs dizaines d'exemples ont été identifiés principalement dans lesdomaines de la gestion de l'eau, de l'énergie, des produits chimiques et des matériaux de construction. La législation suisse autoriserait cependant la concrétisation de nombreuses autres opportunités. Dans cette recherche, celles-ci sont évaluées techniquement, légalement, économiquement et environnementalement. La création d'un référentiel d'évaluation des opportunités permet de déterminer quelles sont les symbioses industrielles techniquement réalisables et pertinentes dans le contexte suisse et dans quels cas celles-ci représenteraient une réelle plus-value par rapport à l'utilisation actuelle de la ressource et aux filières existantes de collecte et de valorisation des déchets.Finalement, un logiciel, SymbioGIS, destiné à soutenir la détection et l'évaluation de symbioses industrielles potentielles a été développé. Il s'agit d'une interface web accessible pour de nombreux utilisateurs, couplée à une interface de systèmes d'information géographique. En plus de la détection de symbioses industrielles, plusieurs fonctionnalités sont proposées pour faciliter la prise en compte des flux de matière et d'énergie dans les problématiques liées à l'aménagement du territoire et au positionnement des activités économiques.En conclusion, cette recherche met en évidence la nécessité de rapprocher les institutions publiques en charge de la protection de l'environnement, de la promotion économique et de l'aménagement du territoire pour favoriser l'essor des symbioses industrielles comme stratégie pour la gestion des ressources matérielles et énergétiques. Elle propose des pistes pour intensifier les collaborations entre ces domaines et accélérer le partage des connaissances liées aux flux de matière et d'énergie et à leur cheminement au sein des activités économiques afin de rendre le système industriel existant en Suisse romande viable à long terme. Parallèlement, elle étudie les possibilités de transposer ces considérations et les procédures et outils développés dans le contexte économique et social de la région Asie-Pacifique, où se trouvent aujourd'hui de nombreuses activités de production.SummaryIndustrial symbioses: A new strategy for improving how economic activities use material and energy resourcesThis thesis focuses on one application of industrial ecology, industrial symbioses, as a strategy for improving how economic activities consume material and energy resources. Industrial symbioses seek to create new collaborations among economic players with the goal of exchanging information, raw materials, and waste directly among area businesses, and to step up the potential pooling of services and infrastructure among neighboring companies.The identification and implementation of industrial symbioses are studied from several angles. The research first examines the development of implementation procedures for government bodies, academic institutions, and environmental consulting services. The purpose of the procedures is to create a dynamic of collaboration and trust between the economic players and the public officials in a region in order to identify potential industrial symbioses. The procedures necessitate managing large amounts of information about material and energy flows.Fieldwork conducted in the canton of Geneva and the Lausanne region, and used as case studies for the research, highlights a great number of industrial symbioses that already exist in French-speaking Switzerland. Several dozen examples are identified, primarily in the areas of water management, energy, chemical products, and building materials; however, Swiss law would permit many others. The research evaluates these opportunities from a technical, legal, economic, and environmental standpoint. By developing an assessment framework it is possible to determine which industrial symbioses are technically feasible and pertinent in Switzerland, and under what circumstances they would represent real added value compared to the current use of the resource and to existing systems for collecting and reusing waste.Lastly, SymbioGIS software was developed to help identify and assess potential industrial symbioses. The program's Web-based interface can be accessed by multiple users and is coupled with an interface that provides geographic information. In addition to identifying industrial symbioses, several program functionalities make it easier to consider material and energy flows with regard to local development issues and siting economic activities.In conclusion, the research highlights the need to bring together public institutions charged with protecting the environment, promoting economic activity, and overseeing development in order to foster the expansion of industrial symbioses as a strategy for managing material and energy resources. It proposes solutions for stepping up collaboration among these players and accelerating the sharing of knowledge about material and energy flows and their paths within economic activities with the goal of making theexisting industrial system in French-speaking Switzerland viable long-term. Also examined were thepossibilities of transposing these considerations and the study's findings about Switzerland to the economic and social context of the Asia-Pacific region, where much production is now located.