The effect of the tensor force on the predicted stability of superheavy nuclei

The effect of the tensor component of the Skyrme effective nucleon-nucleon interaction on the single-particle structure in superheavy elements is studied. A selection of the available Skyrme forces has been chosen and their predictions for the proton and neutron shell closures investigated. The inclusion of the tensor term with realistic coupling strength parameters leads to a small increase in the spin-orbit splitting between the proton 2f7/2 and 2f5/2 partners, opening the Z=114 shell gap over a wide range of nuclei. The Z=126 shell gap, predicted by these models in the absence of the tensor term, is found to be stongly dependent on neutron number with a Z=138 gap opening for large neutron numbers, having a consequent implication for the synthesis of neutron-rich superheavy elements. The predicted neutron shell structures remain largely unchanged by inclusion of the tensor component.

Effects of hydroxyl group distribution on the reactivity, stability and optical properties of fullerenols

We investigate the impact of hydroxyl groups on the properties of C(60)(OH)(n) systems, with n = 1, 2, 3, 4, 8, 10, 16, 18, 24, 32 and 36 by means of first-principles density functional theory calculations. A detailed analysis from the local density of states has shown that adsorbed OH groups can induce dangling bonds in specific carbon atoms around the adsorption site. This increases the tendency to form polyhydroxylated fullerenes (fullerenols). The structural stability is analyzed in terms of the calculated formation enthalpy of each species. Also, a careful examination of the electron density of states for different fullerenols shows the possibility of synthesizing single molecules with tunable optical properties.

Investigation into the temporal stability of aqueous standard solutions of psilocin and psilocybin using high performance liquid chromatography

This paper reports an investigation into the temporal stability of aqueous solutions of psilocin and psilocybin reference drug standards over a period of fourteen days. This study was performed using high performance liquid chromatography utilising a (955% vlv) methanol: 10 mM ammonium formate,
pH 3.5 mobile phase and absorption detection at 269 nm. It was found that the exclusion of light significantly prolonged the useful life of standards, with aqueous solutions of both psilocin and psilocybin being stable over a period of seven days.

Comparison of the color stability and lipid oxidative stability of fresh vacuum packaged lamb muscle containing elevated omega-3 and omega-6 fatty acid levels from dietary manipulation

A series of three experiments were conducted with second cross ([Merino×Border Leicester]×Poll Dorset) wether lambs to evaluate the effects of dietary treatments on manipulation of muscle long-chain (LC) omega-3 fatty acids (FA) on the color stability and oxidative stability of fresh and vacuum packaged lamb. At the end of 7-, 6- and 6-week experimental periods for experiments (Exp.) 1–3 respectively, lambs were slaughtered at a commercial abattoir. At 24 h post-mortem, muscle longissimus lumborum (LL) and longissimus thoracis (LT) were removed and evaluated for color and lipid oxidative stability under specified commercial storage and display condition. Of the dietary supplements used, fish meal and fish oil moderately (P<0.01) and markedly (P<0.001) increased muscle omega-3 FA content, while both protected canola seed (P<0.001) and protected sunflower meal protein significantly (P<0.02) increased muscle omega-6 FA content or ratio of omega-6/omega-3 of the longissimus muscle. In all experiments, the substantial increase (P<0.001) in muscle LC omega-3 and omega-6 FA had no consistent significant effect on color values (redness (a*), yellowness (b*) and lightness (L*)) for fresh and vacuum packaged lamb over a 6-day display period. Lipid oxidation, determined by the levels of thiobarbituric acid reactive substances (TBARS) indicated the enrichment of muscle polyunsaturated fatty acid (PUFA) levels in lambs did not produce significant differences resulting either from main treatment effects or for treatment×day×type interactions (where type was fresh and vacuum packaged). Present results demonstrated the color and lipid oxidative stability of lamb longissimus muscle during refrigerated display was not affected by enhanced levels of omega-3 and omega-6 FA due to dietary treatments.

Comparison of the color stability and lipid oxidative stability of fresh and vacuum packaged lamb muscle containing elevated omega-3 and omega-6 fatty acid levels from dietary manipulation

A series of three experiments were conducted with second cross ([Merino×Border Leicester]×Poll Dorset) wether lambs to evaluate the effects of dietary treatments on manipulation of muscle long-chain (LC) omega-3 fatty acids (FA) on the color stability and oxidative stability of fresh and vacuum packaged lamb. At the end of 7-, 6- and 6-week experimental periods for experiments (Exp.) 1–3 respectively, lambs were slaughtered at a commercial abattoir. At 24 h post-mortem, muscle longissimus lumborum (LL) and longissimus thoracis (LT) were removed and evaluated for color and lipid oxidative stability under specified commercial storage and display condition. Of the dietary supplements used, fish meal and fish oil moderately (P<0.01) and markedly (P<0.001) increased muscle omega-3 FA content, while both protected canola seed (P<0.001) and protected sunflower meal protein significantly (P<0.02) increased muscle omega-6 FA content or ratio of omega-6/omega-3 of the longissimus muscle. In all experiments, the substantial increase (P<0.001) in muscle LC omega-3 and omega-6 FA had no consistent significant effect on color values (redness (a*), yellowness (b*) and lightness (L*)) for fresh and vacuum packaged lamb over a 6-day display period. Lipid oxidation, determined by the levels of thiobarbituric acid reactive substances (TBARS) indicated the enrichment of muscle polyunsaturated fatty acid (PUFA) levels in lambs did not produce significant differences resulting either from main treatment effects or for treatment×day×type interactions (where type was fresh and vacuum packaged). Present results demonstrated the color and lipid oxidative stability of lamb longissimus muscle during refrigerated display was not affected by enhanced levels of omega-3 and omega-6 FA due to dietary treatments.

Comparison of the color stability and lipid oxidative stability fo fresh and vacuum packaged lamb muscle containing elevated omega-3 and omega-6 fatty acid levels from dietary manipulation

A series of three experiments were conducted with second cross ([Merino×Border Leicester]×Poll Dorset) wether lambs to evaluate the effects of dietary treatments on manipulation of muscle long-chain (LC) omega-3 fatty acids (FA) on the color stability and oxidative stability of fresh and vacuum packaged lamb. At the end of 7-, 6- and 6-week experimental periods for experiments (Exp.) 1–3 respectively, lambs were slaughtered at a commercial abattoir. At 24 h post-mortem, muscle longissimus lumborum (LL) and longissimus thoracis (LT) were removed and evaluated for color and lipid oxidative stability under specified commercial storage and display condition. Of the dietary supplements used, fish meal and fish oil moderately (P<0.01) and markedly (P<0.001) increased muscle omega-3 FA content, while both protected canola seed (P<0.001) and protected sunflower meal protein significantly (P<0.02) increased muscle omega-6 FA content or ratio of omega-6/omega-3 of the longissimus muscle. In all experiments, the substantial increase (P<0.001) in muscle LC omega-3 and omega-6 FA had no consistent significant effect on color values (redness (a*), yellowness (b*) and lightness (L*)) for fresh and vacuum packaged lamb over a 6-day display period. Lipid oxidation, determined by the levels of thiobarbituric acid reactive substances (TBARS) indicated the enrichment of muscle polyunsaturated fatty acid (PUFA) levels in lambs did not produce significant differences resulting either from main treatment effects or for treatment×day×type interactions (where type was fresh and vacuum packaged). Present results demonstrated the color and lipid oxidative stability of lamb longissimus muscle during refrigerated display was not affected by enhanced levels of omega-3 and omega-6 FA due to dietary treatments.

Application of the Hottel-Whillier equations to the analysis of a building integrated photovoltaic/thermal solar collector

The idea of combining photovoltaic and solar thermal collectors (PVT collectors) to provide electrical and heat energy is not new, however it is an area that has received only limited attention. With concern growing over energy sources and their usage, PVTs have become an area receiving more attention. Although PVTs are not as prevalent as solar thermal systems, the integration of photovoltaic and solar thermal collectors into the walls or roofing structure of a building could provide greater opportunity for the use of renewable solar energy technologies in domestic, commercial and industrial applications. As such, the design of a novel building integrated photovoltaic/thermal (BIPVT) solar collector is theoretically analysed through the use of a modified Hottel-Whillier model. The thermal and electrical efficiency under a range of conditions are subsequently determined and results showing how key design parameters influence the performance of the BIPVT system are presented.

Studies on the photochemical stability of organo phosphorus insecticides for textile mothproofing

The light stability of 0,0-diethyl-0-(4-ethylthiophenyl)phosphorothioate, a parent structure of a new class of fibre-reactive organophosphorus insectproofing agents for use on wool textiles was extensively examined. The rate of degradation of 0,0-diethyl-0-(4-ethylthiophenyl)phosphoro-thioate in polar and non-polar solution and on wool upon irradiation by simulated sunlight was investigated using high performance liquid chromatography.. The major photodegradation products in each case were correlated with the HPLC retention times of synthetically prepared compounds. The main product formed was the sulphoxide, 0,0-diethyl-O-(4-ethylsulphinylphenyl)phosphorothioate, whose insecticidal activity against the major textile pests was shown to be similar to that of the parent compound. In polar solution a polar product which could not be identified was formed. Both 4-ethylsulphinylphenol and 4-ethyIsulphony1-phenol were found on wool but not in solution. The effect of various ultraviolet stabilizers on the rate of photodegradation of 0,0-diethyl-0-(4-ethylthiophenyl)phosphorothioate was also examined. Ultraviolet absorbers of the 2-hydroxybenzophenone and 2-hydroxybenzotriazole classes conferred the best protection in each case. However, on wool typical wool dyes applied at conventional levels were also effective.

More than mere numbers: the impact of lethal control on the social stability of a top-order predator

Population control of socially complex species may have profound ecological implications that remain largely invisible if only their abundance is considered. Here we discuss the effects of control on a socially complex top-order predator, the dingo (Canis lupus dingo). Since European occupation of Australia, dingoes have been controlled over much of the continent. Our aim was to investigate the effects of control on their abundance and social stability. We hypothesized that dingo abundance and social stability are not linearly related, and proposed a theoretical model in which dingo populations may fluctuate between three main states: (A) below carrying capacity and socially fractured, (B) above carrying capacity and socially fractured, or (C) at carrying capacity and socially stable. We predicted that lethal control would drive dingoes into the unstable states A or B, and that relaxation of control would allow recovery towards C. We tested our predictions by surveying relative abundance (track density) and indicators of social stability (scent-marking and howling) at seven sites in the arid zone subject to differing degrees of control. We also monitored changes in dingo abundance and social stability following relaxation and intensification of control. Sites where dingoes had been controlled within the previous two years were characterized by low scent-marking activity, but abundance was similar at sites with and without control. Signs of social stability steadily increased the longer an area was allowed to recover from control, but change in abundance did not follow a consistent path. Comparison of abundance and stability among all sites and years demonstrated that control severely fractures social groups, but that the effect of control on abundance was neither consistent nor predictable. Management decisions involving large social predators must therefore consider social stability to ensure their conservation and ecological functioning.

The parameter stability of a high dk rigid lens material

The use of rigid materials with high oxygen permeability (Dk) is on the increase, their major benefit being the reduction of hypoxia. However, there is a reluctance to use these materials possibly due to increased surface scratching, reduced wettability, increased deposition, reduced life expectancy and parameter instability. Considering parameter stability, various studies have demonstrated contradictory results or used high Dk materials based on the silicone acrylate polymer. This study was designed to investigate whether the parameters of a high Dk rigid fluorocarbon contact lens material changed during daily wear and extended wear schedules. Thirty five subjects, divided into group groups, Group I wore the lens on a daily wear basis, whereas those in Group II wore the lens on a monthly extended wear basis. The parameters and integrity of the lenses were monitored in both groups every 3 months. For lens integrity a statistically significant increase in surface scratching was demonstrated for the lenses worn by the subjects of both groups over the time of the study (Group I, F=7.990, P <0.0001 [ANCOVA]; Group II, F=6.241, P=0.003 [ANCOVA]). The only parameter to show a statistically significant variation over the study period was that of centre thickness for the lenses worn by the subjects in Group I (F=3.976, P=0.0063 [ANCOVA]), with a mean reduction in centre thickness of 0.022 mm at the 12 month visit.

No change was noted for either group or between groups for the other parameters measured. This study demonstrates that the parameters of rigid contact lenses manufactured from high Dk fluorocarbons are stable with only a non-clinically significant reduction in centre thickness for the contact lenses worn by the subjects in Group I.

The thermal stability and structural site-distribution of Eu3+ ions in the red-emitting phosphors Ca9Eu2W4O24 and Sr9Eu2W4O24

The red-emitting phosphors Ca₉Eu₂W₄O₂₄ and Sr₉Eu₂W₄O₂₄ were synthesized by the solid-state reaction method. The crystal phases were characterized by X-ray powder diffraction. The photoluminescence excitation and emission spectra were investigated. The luminescence excitation and emission spectra confirm that the phosphors are efficiently excited by near UV light. The dependence of luminescence intensities on the heating temperatures was investigated. The Ca₉Eu₂W₄O₂₄ phosphor exhibits higher thermal stability than that of Sr₉Eu₂W₄O₂₄. The crystallographic sites for Eu³⁺ ions in Ca₉Eu₂W₄O₂₄ and Sr₉Eu₂W₄O₂₄ are investigated by the site-selective excitation spectra in the ⁵D₀ → ⁷F₀ wavelength region. It is identified that the Eu³⁺ ions occupy only M sites (statistically occupied by 0.5Eu and 0.5Ca) in Ca₉Eu₂W₄O₂₄ and, however, the Eu³⁺ ions can substitute both M sites (Eu³⁺ + Sr²⁺) and Sr²⁺ sites in Sr₉Eu₂W₄O₂₄. The luminescence spectra and the thermal stability are discussed on the basis of the crystal structure, Eu³⁺ site-distributions and the energy transfer.

On the temperature stability of extracellular hemoglobin of Glossoscolex paulistus, at different oxidation states: SAXS and DLS studies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of the color stability of two techniques for reproducing artificial irides after microwave polymerization

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of microwave disinfection on the dimensional stability of intact and relined acrylic resin denture bases

Statement of problem. Microwave irradiation has been suggested as a method to disinfect denture bases. However, the effect of microwave heating on the dimensional stability of the relined denture bases is unknown.Purpose. The purpose of this study was to evaluate the dimensional stability of intact and relined acrylic resin denture bases after microwave disinfection.Material and methods. A standard brass cast simulating an edentulous maxillary arch was machined and used to fabricate 2- and 4-mm-thick denture bases (n=200), which were processed with heat-polymerized acrylic resin (Lucitone 550). The 2-mm thick-specimens (n=160) were relined with 2 mm of autopolymerizing resin (Tokuso Rebase Fast, Ufi Gel Hard, Kooliner, or New Truliner). Distances between 5 removable pins on the standard brass cast were measured with a Nikon optical comparator, and the area (mm(2)) formed by the distance between 5 pins was calculated and served as baseline. During fabrication, the pins were transferred to the intaglio surface of the specimens. Differences between the baseline area and those subsequently determined for the specimens were used to calculate the percent dimensional changes. The intact and relined denture bases were divided into 4 groups (n=10) and evaluated after: polymerization (control group P); 1 cycle of microwave disinfection (MW); daily microwave disinfection for 7 days (control group MW7); water storage for 7 days (WS7). Microwave irradiation was performed for 6 minutes at 650 W. Data were analyzed using 2-way ANOVA followed by Tukey's test (alpha=.05).Results. Intact specimens and those relined with Kooliner and New Truliner showed increased shrinkage after 1 (P=.05, .018, and .001, respectively) and 7 (P <.001, .003, and <.001, respectively) cycles of microwave disinfection. With the exception of specimens relined with Kooliner, intact specimens showed greater shrinkage than the relined specimens after 7 cycles of microwave disinfection.Conclusions. Microwave disinfection produced increased shrinkage of intact specimens and those relined with New Truliner and Kooliner.