The use of life-cycle assessment to evaluate the environmental impacts of growing genetically modified, nitrogen use-efficient canola

Agriculture, particularly intensive crop production, makes a significant contribution to environmental pollution. A variety of canola (Brassica napus) has been genetically modified to enhance nitrogen use efficiency, effectively reducing the amount of fertilizer required for crop production. A partial life-cycle assessment adapted to crop production was used to assess the potential environmental impacts of growing genetically modified, nitrogen use-efficient (GMNUE) canola in North Dakota and Minnesota compared with a conventionally bred control variety. The analysis took into account the entire production system used to produce 1 tonne of canola. This comprised raw material extraction, processing and transportation, as well as all agricultural field operations. All emissions associated with the production of 1 tonne of canola were listed, aggregated and weighted in order to calculate the level of environmental impact. The findings show that there are a range of potential environmental benefits associated with growing GMNUE canola. These include reduced impacts on global warming, freshwater ecotoxicity, eutrophication and acidification. Given the large areas of canola grown in North America and, in particular, Canada, as well as the wide acceptance of genetically modified varieties in this area, there is the potential for GMNUE canola to reduce pollution from agriculture, with the largest reductions predicted to be in greenhouse gases and diffuse water pollution.

A case study to investigate the life cycle carbon emissions and carbon storage capacity of a cross laminated timber, multi-storey residential building

Forests are a store of carbon and an eco-system that continually removes carbon dioxide from the atmosphere. If they are sustainably managed, the carbon store can be maintained at a constant level, while the trees removed and converted to timber products can form an additional long term carbon store. The total carbon store in the forest and associated ‘wood chain’ therefore increases over time, given appropriate management. This increasing carbon store can be further enhanced with afforestation. The UK’s forest area has increased continually since the early 1900s, although the rate of increase has declined since its peak in the late 1980s, and it is a similar picture in the rest of Europe. The increased sustainable use of timber in construction is a key market incentive for afforestation, which can make a significant contribution to reducing carbon emissions. The case study presented in this paper demonstrates the carbon benefits of a Cross Laminated Timber (CLT) solution for a multi-storey residential building in comparison with a more conventional reinforced concrete solution. The embodied carbon of the building up to completion of construction is considered, together with the stored carbon during the life of the building and the impact of different end of life scenarios. The results of the study show that the total stored carbon in the CLT structural frame is 1215tCO2 (30tCO2 per housing unit). The choice of treatment at end of life has a significant effect on the whole life embodied carbon of the CLT frame, which ranges from -1017 tCO2e for re-use to +153tCO2e for incinerate without energy recovery. All end of life scenarios considered result in lower total CO2e emissions for the CLT frame building compared with the reinforced concrete frame solution.

The life-cycle effects of social security in a model with housing and endogenous benefits

This article develops a life-cycle general equilibrium model with heterogeneous agents who make choices of nondurables consumption, investment in homeowned housing and labour supply. Agents retire from an specific age and receive Social Security benefits which are dependant on average past earnings. The model is calibrated, numerically solved and is able to match stylized U.S. aggregate statistics and to generate average life-cycle profiles of its decision variables consistent with data and literature. We also conduct an exercise of complete elimination of the Social Security system and compare its results with the benchmark economy. The results enable us to emphasize the importance of endogenous labour supply and benefits for agents' consumption-smoothing behaviour.

Life cycle and behaviour of the predaceous mite Cunaxatricha tarsospinosa (Acari: Prostigmata: Cunaxidae)

Life cycle and behaviour of Cunaxatricha tarsospinosa Castro & Den Heyer from rubber trees in Brazil were studied, with Tenuipalpus heveae Baker offered as prey. The study was conducted at 25.4 +/- A 0.2A degrees C, 83 +/- A 5% RH and 12:12 h L:D photophase. The egg stage was the longest immature stage, lasting 17.1 +/- A 1.3 days (mean +/- A SE); total juvenile development was completed in 33.2 +/- A 2.8 days. Lifetime fecundity was 12.0 +/- A 2.2 eggs. Intrinsic rate of population increase was low, suggesting that T. heveae may not be a good prey for the predator. All specimens of C. tarsospinosa collected in the field for this study were females, no males were found. Concurrently, only females were obtained in the laboratory. This seems to be the first report of thelytokous parthenogenesis for cunaxids. Similar to earlier reports for some Cunaxinae and Coleoscirinae, prey were captured when predators were actively searching for them.

Automated Nuclear Analysis of Leishmania major Telomeric Clusters Reveals Changes in Their Organization during the Parasite's Life Cycle

Parasite virulence genes are usually associated with telomeres. The clustering of the telomeres, together with their particular spatial distribution in the nucleus of human parasites such as Plasmodium falciparum and Trypanosoma brucei, has been suggested to play a role in facilitating ectopic recombination and in the emergence of new antigenic variants. Leishmania parasites, as well as other trypanosomes, have unusual gene expression characteristics, such as polycistronic and constitutive transcription of protein-coding genes. Leishmania subtelomeric regions are even more unique because unlike these regions in other trypanosomes they are devoid of virulence genes. Given these peculiarities of Leishmania, we sought to investigate how telomeres are organized in the nucleus of Leishmania major parasites at both the human and insect stages of their life cycle. We developed a new automated and precise method for identifying telomere position in the three-dimensional space of the nucleus, and we found that the telomeres are organized in clusters present in similar numbers in both the human and insect stages. While the number of clusters remained the same, their distribution differed between the two stages. The telomeric clusters were found more concentrated near the center of the nucleus in the human stage than in the insect stage suggesting reorganization during the parasite's differentiation process between the two hosts. These data provide the first 3D analysis of Leishmania telomere organization. The possible biological implications of these findings are discussed.

Ant diversity (Hymenoptera: Formicidae) and predation by ants on the different stages of the sugarcane borer life cycle Diatraea saccharalis (Lepidoptera: Crambidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Life cycle and host specificity of Amblyomma triste (Acari : Ixodidae) under laboratory conditions

We report biological data of two generations of Amblyomma triste in laboratory and compared the suitability of different host species. Infestations by larval and nymphal stages were performed on guinea pigs (Cavia porcellus), chickens (Gallus gallus), rats (Rattus norvegicus), rabbits (Oryctolagus cuniculus), wild mice (Calomys callosus), dogs (Canis familiaris) and capybaras (Hydrochaeris hydrochaeris). Infestations by adult ticks were performed on dogs, capybaras and rabbits. Tick developmental periods were observed in an incubator at 27degreesC and RH 90%. Guinea pigs were the most suitable hosts for larvae and nymphs, followed by chickens. The remaining host species were less suitable for immature ticks as fewer engorged ticks were recovered from them. Mean larval feeding periods varied from 3.8 to 4.7 d between different host species. Mean larval premolt periods ranged from 8.9 to 10.4 d. Nymphal mean feeding periods varied from 4.2 to 6.2 d for ticks fed on different host species. Premolt period of male nymphs (mean: 15.4 d) was significantly longer than that of female nymphs (14.7 d). Female nymphs were significantly heavier than male nymphs. The overall sex ratio of the adult ticks emerged from nymphs was 0.9:1 (M:F). Capybaras were the most suitable host for the tick adult stage as significantly more engorged females were recovered from them and these females were significantly heavier than those recovered from dogs or rabbits. The life cycle of A. triste in laboratory could be completed in an average period of 155 d. The potential role of guinea pigs, birds and capybaras, as hosts for A. triste in nature, is discussed.

Comparative study of the life cycle assessment of particleboards made of residues from sugarcane bagasse (Saccharum spp.) and pine wood shavings (Pinus elliottii)

This paper presents a research on the environmental impacts of particleboards produced from wastes, based on a comparative Life Cycle Assessment study. The particleboards were manufactured in laboratorial scale from the following residues: sugarcane bagasse (Saccharum spp.) and pine wood shavings (Pinus elliottii). The study was developed following the methodological guidelines of ISO 14040. The functional unit adopted was the m2 of the particleboards produced and the impacts were evaluated by the Environmental Development of Industrial Products method. The results indicated that pine particleboard present the highest environmental impact potential. Our findings suggested that the factors that mostly aggravated the environmental impacts were: the distance between the raw materials and the production site, and formaldehyde emissions (FE). The first is related to the combustion of fossil fuel during the acquisition of raw material, which achieved the values of 2185.94 g/m2 for consumption of non-renewable resources for pine particleboard and 893.53 g/m2 for bagasse particleboard. The second is related to the use of urea-formaldehyde resin, responsible for the FE into the air during production. The FE is accountable for the contamination of approximately 7,800,000.00 m3 of air per m2 of particleboard produced, and was the factor with the greatest impact in human toxicity potential. © 2013 Elsevier Ltd. All rights reserved.

Tourism life cycle, tourism competitiveness and upgrading strategies in the Caribbean

In the 1980s Butler adapted the life cycle product model to the tourism industry and created the “Tourism Area Life Cycle (TALC) model”. The model recognizes six stages in the tourism product life cycle: exploration, investment, development, consolidation, stagnation and followed, after stagnation, by decline or revitalization of the product. These six stages can in turn be regrouped into four main stages. The Butler model has been applied to more than 30 country cases with a wide degree of success. De Albuquerque and Mc Elroy (1992) applied the TALC model to 23 small Caribbean island States in the 1990s. Following De Albuquerque and Mc Elroy, the TALC is applied to the 32 member countries of the Caribbean Tourism Organization (CTO) (except for Cancun and Cozumel) to locate their positions along their tourism life-cycle in 2007. This is done using the following indicators: the evolution of the level, market share and growth rate of stay-over arrivals; the growth rate and market share of visitor expenditures per arrival and the tourism styles of the destinations, differentiating between ongoing mass tourism and niche marketing strategies and among upscale, mid-scale and low-scale destinations. Countries have pursued three broad classes of strategies over the last 15 years in order to move upward in their tourism life cycle and enhance their tourism competitiveness. There is first a strategy that continues to rely on mass-tourism to build on the comparative advantages of “sun, sand and sea”, scale economies, all-inclusive packages and large amounts of investment to move along in Stage 2 or Stage 3 (Cuba, Dominican Republic, Puerto Rico). There is a second strategy pursued mainly by very small islands that relies on developing specific niche markets to maintain tourism competitiveness through upgrading (Anguilla, Antigua and Barbuda, British Virgin Islands and Turks and Caicos), allowing them to move from Stage 2 to Stage 3 or Stage 3 to a rejuvenation stage. There is a third strategy that uses a mix of mass-tourism, niche marketing and quality upgrading either to emerge onto the intermediate stage (Trinidad and Tobago); avoid decline (Aruba, The Bahamas) or rejuvenate (Barbados, Jamaica and the United States Virgin Islands). There have been many success stories in Caribbean tourism competitiveness and further research should aim at empirically testing the determinants of tourism competitiveness for the region as a whole.

Reproductive variability of the Amazon River prawn, Macrobrachium amazonicum (Caridea, Palaemonidae): influence of life cycle on egg production

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)