"Offshore tower or platform foundations: numerical analysis of a laterally loaded single pile or pile group in soft clay and analysis of actions on a jacket structure"

Laterally loaded piles are a typical situation for a large number of cases in which deep foundations are used. Dissertation herein reported, is a focus upon the numerical simulation of laterally loaded piles. In the first chapter the best model settings are largely discussed, so a clear idea about the effects of interface adoption, model dimension, refinement cluster and mesh coarseness is reached. At a second stage, there are three distinct parametric analyses, in which the model response sensibility is studied for variation of interface reduction factor, Eps50 and tensile cut-off. In addition, the adoption of an advanced soil model is analysed (NGI-ADP). This was done in order to use the complex behaviour (different undrained shear strengths are involved) that governs the resisting process of clay under short time static loads. Once set a definitive model, a series of analyses has been carried out with the objective of defining the resistance-deflection (P-y) curves for Plaxis3D (2013) data. Major results of a large number of comparisons made with curves from API (America Petroleum Institute) recommendation are that the empirical curves have almost the same ultimate resistance but a bigger initial stiffness. In the second part of the thesis a simplified structural preliminary design of a jacket structure has been carried out to evaluate the environmental forces that act on it and on its piles foundation. Finally, pile lateral response is studied using the empirical curves.

Family change theory: A preliminary evaluation on the basis of recent cross-cultural studies

Family change theory (Kagitcibasi, 1996, 2007) is an approach which can be used to explain how modernisation and globalisation processes affect the family. The most important assumption of the theory is that when traditional interdependent cultures modernise, they need not necessarily develop in the direction of the independent family model typical of Western individualistic societies. Instead, they may develop towards a family model of emotional interdependence that combines continuing emotional interdependencies in the family with declining material interdependencies and with rising personal autonomy. In this chapter a preliminary evaluation of the empirical status of family change theory is given based on a review of recent cross-cultural studies. It will be shown to what extent the few studies that have been systematically conducted in this respect have found results either supporting or not supporting aspects ofthe theory, and where the strengths and problems of this research lie.

Complete digital workflow for the production of implant-supported single-unit monolithic crowns.

OBJECTIVES The aim of this case series was to introduce a complete digital workflow for the production of monolithic implant crowns. MATERIAL AND METHODS Six patients were treated with implant-supported crowns made of resin nano ceramic (RNC). Starting with an intraoral optical scan (IOS), and following a CAD/CAM process, the monolithic crowns were bonded either to a novel prefabricated titanium abutment base (group A) or to a CAD/CAM-generated individualized titanium abutment (group B) in premolar or molar sites on a soft tissue level dental implant. Economic analyses included clinical and laboratory steps. An esthetic evaluation was performed to compare the two abutment-crown combinations. RESULTS None of the digitally constructed RNC crowns required any clinical adaptation. Overall mean work time calculations revealed obvious differences for group A (65.3 min) compared with group B (86.5 min). Esthetic analysis demonstrated a more favorable outcome for the prefabricated bonding bases. CONCLUSIONS Prefabricated or individualized abutments on monolithic RNC crowns using CAD/CAM technology in a model-free workflow seem to provide a feasible and streamlined treatment approach for single-edentulous space rehabilitation in the posterior region. However, RNC as full-contour material has to be considered experimental, and further large-scale clinical investigations with long-term follow-up observation are necessary.

Evaluation of Video Transmission Energy Consumption and Quality

The widespread use of wireless enabled devices and the increasing capabilities of wireless technologies has promoted multimedia content access and sharing among users. However, the quality perceived by the users still depends on multiple factors such as video characteristics, device capabilities, and link quality. While video characteristics include the video time and spatial complexity as well as the coding complexity, one of the most important device characteristics is the battery lifetime. There is the need to assess how these aspects interact and how they impact the overall user satisfaction. This paper advances previous works by proposing and validating a flexible framework, named EViTEQ, to be applied in real testbeds to satisfy the requirements of performance assessment. EViTEQ is able to measure network interface energy consumption with high precision, while being completely technology independent and assessing the application level quality of experience. The results obtained in the testbed show the relevance of combined multi-criteria measurement approaches, leading to superior end-user satisfaction perception evaluation .

I feel you: the design and evaluation of a domotic affect-sensitive spoken conversational agent

We describe the work on infusion of emotion into a limited-task autonomous spoken conversational agent situated in the domestic environment, using a need-inspired task-independent emotion model (NEMO). In order to demonstrate the generation of affect through the use of the model, we describe the work of integrating it with a natural-language mixed-initiative HiFi-control spoken conversational agent (SCA). NEMO and the host system communicate externally, removing the need for the Dialog Manager to be modified, as is done in most existing dialog systems, in order to be adaptive. The first part of the paper concerns the integration between NEMO and the host agent. The second part summarizes the work on automatic affect prediction, namely, frustration and contentment, from dialog features, a non-conventional source, in the attempt of moving towards a more user-centric approach. The final part reports the evaluation results obtained from a user study, in which both versions of the agent (non-adaptive and emotionally-adaptive) were compared. The results provide substantial evidences with respect to the benefits of adding emotion in a spoken conversational agent, especially in mitigating users' frustrations and, ultimately, improving their satisfaction.

El nuevo reto de relación con los clientes: Social CRM

La evolución de Internet al modelo Web 2.0, ha creado el nuevo sistema denominado Social Media, donde han proliferado un número ingente de redes sociales, que han cambiado las formas de relación y colaboración entre los usuarios, así como la relaciones de éstos y las empresas. En respuesta a estos dramáticos cambios sociales y tecnológicos, que actualmente están dando forma a las relaciones negocio-empresa, las empresas están descubriendo que es necesario modificar la estrategia de utilización del CRM (Customer Relationship Management) con sus clientes y desarrollar nuevas capacidades que permitan la creación de valor con los clientes. Y es aquí donde aparece el concepto de Social CRM, entendido como una estrategia centrada en entender, anticiparse y responder mejor a las necesidades de los clientes existentes o potenciales, aprovechando los datos sociales, para crear unas fuertes relaciones beneficiosas para ambas partes. En este trabajo se describe un modelo de adopción de Social CRM, aplicando un método de análisis “Top-Down”, y basado en el modelo de Gartner denominado “The Eight Building Blocks of CRM” [1]. El presente trabajo descompone el modelo de adopción descrito por Gartner, en los siguientes puntos. - Una decisión estratégica de la compañía - Asomarse a la realidad social - Analizar las redes sociales. - Metodología de adopción. - Despliegue y extensión en todos los departamentos de la compañía y la adaptación de los recursos humanos. - Selección e integración con las plataformas tradicionales de CRM - Análisis de herramientas de monitorización de Social CRM El modelo propuesto tiene dos objetivos, por un lado pretende proporcionar la visión de cómo CRM puede influir en los resultados empresariales en la era del cliente social, y por otro, proporcionar a los administradores cómo las inversiones y los recursos existentes de CRM puede ser integrados con las nuevas tecnologías y procesos para formar capacidades que pueden mejorar el rendimiento del negocio. ABSTRACT. “The Internet evolution to Web 2.0 model has created a new system called Social Media, where have proliferated a huge number of social networks which have changed the relationship and collaboration forms user-to-user and user-to-company. In response to these dramatic social and technological changes that are currently shaping the business-business relationships, companies are finding it necessary to modify the strategy for use of CRM (Customer Relationship Management) with customers and develop new capabilities to creating value with customers. And here is where the concept of Social CRM appears, understood as a focus on understanding, anticipating and responding to the needs of existing and potential customers strategy, leveraging social data to create a strong mutually beneficial relationships. In this paper describes an adoption model of Social CRM, using a "Top-Down" analysis method and based on the model of Gartner called "The Eight Building Blocks of CRM" [1]. This paper decomposes the adoption model described by Gartner in the following points. - A company strategic decision. - Look at social reality. - Analyze social networks. - Methodology adoption. - Deployment and extension in all departments of the company and the adaptation of human resources. - Selection and integration with traditional CRM platforms. - Analysis of monitoring tools for Social CRM. The proposed model has two objectives, firstly aims to provide insight into how CRM can influence business outcomes in the era of the social customer, and secondly, to provide administrators how investments and existing resources can be integrated CRM with new technologies and processes for developing capabilities that can increase business performance”.

Experimental and theoretical cross sections for positron scattering from the pentane isomers.

Isomerism is ubiquitous in chemistry, physics, and biology. In atomic and molecular physics, in particular, isomer effects are well known in electron-impact phenomena; however, very little is known for positron collisions. Here we report on a set of experimental and theoretical cross sections for low-energy positron scattering from the three structural isomers of pentane: normal-pentane, isopentane, and neopentane. Total cross sections for positron scattering from normal-pentane and isopentane were measured at the University of Trento at incident energies between 0.1 and 50 eV. Calculations of the total cross sections, integral cross sections for elastic scattering, positronium formation, and electronic excitations plus direct ionization, as well as elastic differential cross sections were computed for all three isomers between 1 and 1000 eV using the independent atom model with screening corrected additivity rule. No definitive evidence of a significant isomer effect in positron scattering from the pentane isomers appears to be present. (C) 2016 AIP Publishing LLC.

Integral elastic, electronic-state, ionization, and total cross sections for electron scattering with furfural

We report absolute experimental integral cross sections (ICSs) for electron impact excitation of bands of electronic-states in furfural, for incident electron energies in the range 20-250 eV. Wherever possible, those results are compared to corresponding excitation cross sections in the structurally similar species furan, as previously reported by da Costa et al. [Phys. Rev. A 85, 062706 (2012)] and Regeta and Allan [Phys. Rev. A 91, 012707 (2015)]. Generally, very good agreement is found. In addition, ICSs calculated with our independent atom model (IAM) with screening corrected additivity rule (SCAR) formalism, extended to account for interference (I) terms that arise due to the multi-centre nature of the scattering problem, are also reported. The sum of those ICSs gives the IAM-SCAR+I total cross section for electron-furfural scattering. Where possible, those calculated IAM-SCAR+I ICS results are compared against corresponding results from the present measurements with an acceptable level of accord being obtained. Similarly, but only for the band I and band II excited electronic states, we also present results from our Schwinger multichannel method with pseudopotentials calculations. Those results are found to be in good qualitative accord with the present experimental ICSs. Finally, with a view to assembling a complete cross section data base for furfural, some binary-encounter-Bethe-level total ionization cross sections for this collision system are presented. (C) 2016 AIP Publishing LLC.

Educating a new generation of library and information science professionals: A United States perspective

This article examines the U.S model of library and information science (LIS) education in light of the changes brought about by information and communication technology. The accepted model of professional preparation in the United States has emphasized graduate education on a Master’s level from LIS programs accredited by the American Library Association (ALA). The authors trace the historical development of this approach and provide an overview of the ALA accreditation process. Furthermore, they examine the strategies of LIS programs in adjusting to the changing information environment, present the debate about the iSchool movement, and discuss the evolution of the core curriculum. In addition, the article explores the relationship between LIS education and the field of practice and presents a practitioner’s perspective on educating library professionals. The authors conclude that the model of advanced professional preparation for librarianship is still relevant in the digital environment, but it requires greater flexibility and close cooperation with the field of practice.

Evaluation of individual protein errors in silver-stained two-dimensional gels

The relationship between spot volume and variation for all protein spots observed on large format 2D gels when utilising silver stain technology and a model system based on mammalian NSO cell extracts is reported. By running multiple gels we have shown that the reproducibility of data generated in this way is dependent on individual protein spot volumes, which in turn are directly correlated with the coefficient of variation. The coefficients of variation across all observed protein spots were highest for low abundant proteins which are the primary contributors to process error, and lowest for more abundant proteins. Using the relationship between spot volume and coefficient of variation we show it is necessary to calculate variation for individual protein spot volumes. The inherent limitations of silver staining therefore mean that errors in individual protein spot volumes must be considered when assessing significant changes in protein spot volume and not global error. (C) 2003 Elsevier Science (USA). All rights reserved.

A modelling approach to estimate the effect of exotic pollinators on exotic weed population dynamics: bumblebees and broom in Australia

The role of mutualisms in contributing to species invasions is rarely considered, inhibiting effective risk analysis and management options. Potential ecological consequences of invasion of non-native pollinators include increased pollination and seed set of invasive plants, with subsequent impacts on population growth rates and rates of spread. We outline a quantitative approach for evaluating the impact of a proposed introduction of an invasive pollinator on existing weed population dynamics and demonstrate the use of this approach on a relatively data-rich case study: the impacts on Cytisus scoparius (Scotch broom) from proposed introduction of Bombus terrestris. Three models have been used to assess population growth (matrix model), spread speed (integrodifference equation), and equilibrium occupancy (lattice model) for C. scoparius. We use available demographic data for an Australian population to parameterize two of these models. Increased seed set due to more efficient pollination resulted in a higher population growth rate in the density-independent matrix model, whereas simulations of enhanced pollination scenarios had a negligible effect on equilibrium weed occupancy in the lattice model. This is attributed to strong microsite limitation of recruitment in invasive C. scoparius populations observed in Australia and incorporated in the lattice model. A lack of information regarding secondary ant dispersal of C. scoparius prevents us from parameterizing the integrodifference equation model for Australia, but studies of invasive populations in California suggest that spread speed will also increase with higher seed set. For microsite-limited C. scoparius populations, increased seed set has minimal effects on equilibrium site occupancy. However, for density-independent rapidly invading populations, increased seed set is likely to lead to higher growth rates and spread speeds. The impacts of introduced pollinators on native flora and fauna and the potential for promoting range expansion in pollinator-limited 'sleeper weeds' also remain substantial risks.

Employee negative emotions in supervisory relationships : an attachment theory perspective

Relationships with supervisors are a major source of negative emotions at work, but little is known about why this is so. The aim of the research was to use attachment theory (Bowlby, 1969, 1973; 1980) as a framework for investigating the nature and causes of employee negative emotional experiences, in the context of their supervisory relationships. The research was conducted in three stages. In Stage 1 two studies were conducted to develop a measure of employee perceptions of supervisor caregiving (SCS). Results indicated that the 20-item scale had good reliability and validity. Stage 2 required participants (N=183) to complete a questionnaire that was designed to examine the roles of supervisor caregiving and working models (specific and global) in determining cognitive and emotional responses to hypothetical supervisor behaviours. The results provided partial support for an Independent Effects Model. Supervisor caregiving predicted specific anxiety and avoidance. In tum, both dimensions of attachment predicted negative emotions, but this relationship was mediated by event interpretation only in the case of avoidance. Global models made a smaller but significant contribution to negative emotions overall. There was no support for an interaction effect between specific and global models in determining event interpretation. In stage 3 a sub-sample of questionnaire respondents (N=24) were interviewed about 'real-life' caregiving and negative emotional experiences in their supervisory relationships. Secure individuals experienced supervisors as consistently warm, available, and responsive. They reported few negative events or emotions. Individuals with insecure specific working models experienced rejecting or inconsistent supervisor caregiving. They were sensitised to trust and closeness issues in their relationships, and reported negative events and emotions underpinned by these themes. Overall, results broadly supported attachment theory predictions. It is concluded that an attachment theory perspective provides new insight into the nature and causes of employee negative emotions in supervisory relationships.

A qualitative case study of teacher perceptions and concerns during the implementation of literacy folders in a select elementary school in Broward County, Florida

Classroom teachers are often required to implement new procedures or practices in response to local or federal education mandates. Attempts to implement innovations, often do not take into account the personal side of change; the perceptions, concerns and needs of those required to implement the innovation. One innovation that was required by the School Board of Broward County, Florida for all elementary classroom teachers was the implementation of Literacy Folders. ^ This study attempted to address the personal side of change by identifying teacher concerns during the implementation of Literacy Folders in a select elementary school in Broward County Florida. The Concerns Based Adoption model (CBAM) for change was used as the conceptual framework for this qualitative case study. ^ Sources of data for this study included participant interviews, observations and analysis of documents. Informal conversations with the participants and unscheduled classroom visits were also sources of data. Seven classroom teachers were interviewed using a predesigned interview guide developed based on the CBAM of change, specifically the Stages of Concern Dimension. Participant responses were coded into two categories, (a) recollections of past perceptions, and (b) present perceptions regarding the innovation. ^ Data analysis resulted in the emergence of one major theme and two subordinate themes. The themes were related to time and purpose of the innovation. The researcher also discovered that the participants exhibited responses typically representative of the CBAM for individuals who are in the process of adjusting to a new innovation. ^ Recommendations based on participant concerns are made for improving the implementation of the innovation. Recommendations for alternatives to the innovation and suggestions regarding areas for further research in the field of educational change are also made. ^

Modeled monthly local topographic lapse rates, Pacific Northwest, USA

An emerging approach to downscaling the projections from General Circulation Models (GCMs) to scales relevant for basin hydrology is to use output of GCMs to force higher-resolution Regional Climate Models (RCMs). With spatial resolution often in the tens of kilometers, however, even RCM output will likely fail to resolve local topography that may be climatically significant in high-relief basins. Here we develop and apply an approach for downscaling RCM output using local topographic lapse rates (empirically-estimated spatially and seasonally variable changes in climate variables with elevation). We calculate monthly local topographic lapse rates from the 800-m Parameter-elevation Regressions on Independent Slopes Model (PRISM) dataset, which is based on regressions of observed climate against topographic variables. We then use these lapse rates to elevationally correct two sources of regional climate-model output: (1) the North American Regional Reanalysis (NARR), a retrospective dataset produced from a regional forecasting model constrained by observations, and (2) a range of baseline climate scenarios from the North American Regional Climate Change Assessment Program (NARCCAP), which is produced by a series of RCMs driven by GCMs. By running a calibrated and validated hydrologic model, the Soil and Water Assessment Tool (SWAT), using observed station data and elevationally-adjusted NARR and NARCCAP output, we are able to estimate the sensitivity of hydrologic modeling to the source of the input climate data. Topographic correction of regional climate-model data is a promising method for modeling the hydrology of mountainous basins for which no weather station datasets are available or for simulating hydrology under past or future climates.

Methods of modelling people using discrete-event simulation

Discrete-event simulation (DES) is a developed technology used to model manufacturing and service systems. However, although the importance of modelling people in a DES has been recognised, there is little guidance on how this can be achieved in practice. The results from a literature review were used in order to identify examples of the use of DES to model people. Each article was examined in order to determine the method used to model people within the simulation study. It was found that there are no common methods but a diverse range of approaches used to model human behaviour in DES. This paper provides an outline of the approaches used to model people in terms of their decision making, availability for work, task performance and arrival rate. The outcome brings together the current knowledge in this area and will be of interest to researchers considering developing a methodology for modelling people in DES and to practitioners engaged with a simulation project involving the model ling of people’s behaviour.