Coordinator's report: rules for nomenclature and gene symbolization in barley.

In this volume, the recommended rules for nomenclature and gene symbolization in barley are reprinted. The current lists of new and revised barley genetic stock descriptions are presented by BGS number order and by locus symbol in alphabetical order.

Field inoculation with arbuscular-mycorrhizal fungi overcomes phosphorus and zinc deficiencies of linseed (Linum usitatissimum) in a vertisol subject to long-fallow disorder

Long-fallow disorder is expressed as exacerbated deficiencies of phosphorus (P) and/or zinc (Zn) in field crops growing after long periods of weed-free fallow. The hypothesis that arbuscular-mycorrhizal fungi (AMF) improve the P and Zn nutrition, and thereby biomass production and seed yield of linseed (Linum usitatissimum) was tested in a field experiment. A factorial combination of treatments consisting of +/- fumigation, +/- AMF inoculation with Glomus spp., +/- P and +/- Zn fertilisers was used on a long-fallowed vertisol. The use of such methods allowed an absolute comparison of plants growing with and without AMF in the field for the first time in a soil disposed to long-fallow disorder. Plant biomass, height, P and Zn concentrations and contents, boll number and final seed yield were (a) least in fumigated soil with negligible AMF colonisation of the roots, (b) low initially in long-fallow soil but increased with time as AMF colonisation of the roots developed, and (c) greatest in soil inoculated with AMF cultures. The results showed for the first time in the field that inflows of both P and Zn into linseed roots were highly dependent on %AMF-colonisation (R-2 = 0.95 for P and 0.85 for Zn, P < 0.001) in a soil disposed to long-fallow disorder. Relative field mycorrhizal dependencies without and with P+Zn fertiliser were 85 % and 86 % for biomass and 68 % and 52 % for seed yield respectively. This research showed in the field that AMF greatly improved the P and Zn nutrition, biomass production and seed yield of linseed growing in a soil disposed to long-fallow disorder. The level of mycorrhizal colonisation of plants suffering from long-fallow disorder can increase during the growing season resulting in improved plant growth and residual AMF inoculum in the soil, and thus it is important for growers to recognise the cause and not terminate a poor crop prematurely in order to sow another. Other positive management options to reduce long fallows and foster AMF include adoption of conservation tillage and opportunity cropping.

Non-cellulosic cell wall polysaccharides are subject to genotype × environment effects in sorghum (Sorghum bicolor) grain

Sorghum is a staple food for half a billion people and, through growth on marginal land with minimal inputs, is an important source of feed, forage and increasingly, biofuel feedstock. Here we present information about non-cellulosic cell wall polysaccharides in a diverse set of cultivated and wild Sorghum bicolor grains. Sorghum grain contains predominantly starch (64–76) but is relatively deficient in other polysaccharides present in wheat, oats and barley. Despite overall low quantities, sorghum germplasm exhibited a remarkable range in polysaccharide amount and structure. Total (1,3;1,4)-β-glucan ranged from 0.06 to 0.43 (w/w) whilst internal cellotriose:cellotetraose ratios ranged from 1.8 to 2.9:1. Arabinoxylan amounts fell between 1.5 and 3.6 (w/w) and the arabinose:xylose ratio, denoting arabinoxylan structure, ranged from 0.95 to 1.35. The distribution of these and other cell wall polysaccharides varied across grain tissues as assessed by electron microscopy. When ten genotypes were tested across five environmental sites, genotype (G) was the dominant source of variation for both (1,3;1,4)-β-glucan and arabinoxylan content (69–74), with environment (E) responsible for 5–14. There was a small G × E effect for both polysaccharides. This study defines the amount and spatial distribution of polysaccharides and reveals a significant genetic influence on cell wall composition in sorghum grain.

Abstract of subject index of New York State Library, Part 1

Digital image

Optimal maintenance policy for equipment subject to random deterioration and random failure A modern control theory approach.

The stochastic version of Pontryagin's maximum principle is applied to determine an optimal maintenance policy of equipment subject to random deterioration. The deterioration of the equipment with age is modelled as a random process. Next the model is generalized to include random catastrophic failure of the equipment. The optimal maintenance policy is derived for two special probability distributions of time to failure of the equipment, namely, exponential and Weibull distributions Both the salvage value and deterioration rate of the equipment are treated as state variables and the maintenance as a control variable. The result is illustrated by an example

The social tasks of learning to become a physical education teacher: Considering the HPE subject department as a community of practice

Initial teacher education (ITE) students participate in various workplaces within schools and in doing so, form understandings about the numerous, and at times competing, expectations of teachers’ work. Through these experiences they form understandings about themselves as health and physical education (HPE) teachers. This paper examines the ways communities of practice within HPE subject department offices function as sites of workplace learning for student teachers. In particular this research focused on how ITE students negotiate tacit and contradictory expectations as well as social tasks during the practicum and the ways in which their understandings are mediated through participation in the workspace. Qualitative methods of survey and semi-structured interview were used to collect data on a cohort of student teachers during and following their major (10 week) practicum experience. Analysis was informed by theories of communities of practice (Wenger, 1998), workplace learning (Billett, 2001), and social task systems (Doyle, 1977). It was evident that considerable effort, attention, and energy was expended on various interrelated social tasks aimed at building positive relationships with their supervisor and other HPE teachers at the school. The social dynamics were highly nuanced and required a game-like approach. In our view the complexity that student teachers must negotiate in striving for an excellent evaluation warrants specific attention in physical education teacher education (PETE) programs. This study raises questions regarding our responsibilities in sending student teachers into contexts that might even be described as toxic. We offer some suggestions for how PETE might better support students going into practicum contexts that might be regarded as problematic workplaces.

Becoming a health and physical education teacher: Student teacher ‘performances’ in the HPE subject department office

This study considered how physical education teacher education students ‘perform’ their ‘selves’ within subject department offices during the practicum or ‘teaching practice’. The research was framed by a conceptual framework informed by the work of Goffman on ‘performance’ and ‘front’. The findings revealed three common performances across the whole group across all sites. These were: performance of sports talk, bodily performances, and performance of masculine repertoires. Such performances were considered to be inconsistent with the coursework ideals and principles within the teacher education programme but in step with the general ethos of most PE department offices.

Experimental studies of lipped channel beams subject to web crippling under two-flange load cases

Lipped channel beams (LCBs) are commonly used as flexural members such as floor joists and bearers in the construction 6 industry. These thin-walled LCBs are subjected to specific buckling and failure modes, one of them being web crippling. Despite considerable 7 research in this area, some recent studies have shown that the current web crippling design rules are unable to predict the test capacities under 8 end-two-flange (ETF) and interior-two-flange (ITF) load conditions. In many instances, web crippling predictions by the available design 9 standards such as AISI S100, AS/NZS 4600 and Eurocode 3 Part 1-3 are inconsistent, i.e., unconservative in some cases, although they 10 are conservative in other cases. Hence, experimental studies consisting of 36 tests were conducted in this research to assess the web crippling 11 behavior and capacities of high-strength LCBs under two-flange load cases (ETF and ITF). Experimental results were then compared with the 12 predictions from current design rules. Comparison of the ultimate web crippling capacities from tests showed that the design equations are 13 very unconservative for LCB sections under the ETF load case and are conservative for the ITF load case. Hence, improved equations were 14 proposed to determine the web crippling capacities of LCBs based on the experimental results from this study. Current design equations do 15 not provide the direct strength method (DSM) provisions for web crippling. Hence, suitable design rules were also developed under the DSM 16 format using the test results and buckling analyses using finite-element analyses.

Experimental and numerical studies of hollow flange channel beams subject to web crippling under ETF and ITF load cases

This paper presents the details of experimental and numerical studies on the web crippling behaviour of hollow flange channel beams, known as LiteSteel beams (LSB). The LSB has a unique shape of a channel beam with two rectangular hollow flanges, made using a unique manufacturing process. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear actions and combined actions. To date, however, no investigation has been conducted into the web crippling behaviour and strength of LSB sections under ETF and ITF load conditions. Hence experimental studies consisting of 28 tests were first conducted in this research to assess the web crippling behaviour and strengths of LSBs under two flange load cases (ETF and ITF). Experimental web crippling capacity results were then compared with the predictions from AS/NZS 4600 and AISI S100 design rules, which showed that AS/NZS 4600 and AISI S100 design equations are very unconservative for LSBs under ETF and ITF load cases. Hence improved equations were proposed to determine the web crippling capacities of LSBs. Finite element models of the tested LSBs were then developed, and used to determine the elastic buckling loads of LSBs under ETF and ITF load cases. New equations were proposed to determine the corresponding elastic buckling coefficients of LSBs. Finally suitable design rules were also developed under the Direct Strength Method format using the test results and buckling analysis results from finite element analyses.

Numerical modelling of rivet fastened rectangular hollow flange channel beams subject to shear

The intermittently rivet fastened Rectangular Hollow Flange Channel Beam (RHFCB) is a new cold-formed hollow section proposed as an alternative to welded hollow flange beams. Many experimental and numerical studies have been carried out in the past to investigate the shear behaviour of lipped channel beams. However, no research has been undertaken on the shear behaviour of rivet fastened RHFCBs. Therefore experimental and numerical studies were undertaken to investigate the shear behaviour and strength of rivet fastened RHFCBs. In this research finite element models of rivet fastened RHFCBs were developed to investigate their nonlinear shear behaviour including their buckling characteristics and ultimate shear strength. This paper presents the details of the finite element models of rivet fastened RHFCBs and the results. Both finite element analysis and experimental results showed that the current design rules are very conservative for the shear design of rivet fastened RHFCBs. Appropriate improvements have been proposed for the design rules of shear strength of rivet fastened RHFCBs within the Direct Strength Method format.

Many disciplines-common approach: Experiences in the development and delivery of an interprofessional health subject

In 2004, the Faculty of Health Sciences at La Trobe University in Victoria, Australia, introduced a new, final-year subject ‘Interdisciplinary Professional Practice’. The subject is taught to all students enrolled in the 11 allied health and human service disciplines at La Trobe University across metropolitan and rural campuses. The delivery is online to overcome timetabling barriers and to provide time and geographic flexibility. The subject is presented using an enquiry-based learning model. Students are exposed to the concepts of interdisciplinary teamwork through shared learning across professional boundaries to enable a collaborative workforce. An outline of the background development and design of this subject, and its implementation and content areas is presented. A discussion of relevant literature and an analysis of the subject evaluations and focus groups that have guided subject development to enhance student learning over eight cohorts is included.

Which Narrative? The Case of the Narrative Subject in Fifteenth-Century Altarpieces

The development of the altarpiece towards the end of the late medieval period added a new decorous and conspicuously visual element to the church interior. The altarpiece became the prime location for iconic – i.e. non-narrative – images, but almost from the beginning narrative images were part of the altarpiece in the form of small-scale pictures placed underneath or next to an iconic image in the centre. In the fifteenth century the format of the altarpiece gradually changed, and simultaneously with the development of the unified picture field some new narrative subjects began to appear on the central panel as the main subject of the altarpiece. During the course of the fifteenth century, narrative subjects became increasingly frequent and accepted subjects for altarpieces. In this article I will focus on the problem of the narrative altarpiece, a seeming contradiction of terms. As narrative subjects were transferred from their usual location to the central field of the altarpiece, traditionally reserved for the iconic image, the narrative was included in a new context and expected to assume the function of the altarpiece. How did a narrative image function in this context, and what kind of audience did it serve? Since the questions involved in the issue are complex, I will focus on the biblical narrative of The Visitation as a case study, and use two well-known Florentine altarpieces from the fifteenth century as examples of the interpretative choices open to the viewers of these altarpieces.

Subject Teacher Training and Teaching in English

The purpose of this Master s thesis is on one hand to find out how CLIL (Content and Language Integrated Learning) teachers and English teachers perceive English and its use in teaching, and on the other hand, what they consider important in subject teacher education in English that is being planned and piloted in STEP Project at the University of Helsinki Department of Teacher Education. One research question is also what kind of language requirements teachers think CLIL teachers should have. The research results are viewed in light of previous research and literature on CLIL education. Six teachers participate in this study. Two of them are English teachers in the comprehensive school, two are class teachers in bilingual elementary education, and two are subject teachers in bilingual education, one of whom teaches in a lower secondary school and the other in an upper secondary school. One English teacher and one bilingual class teacher have graduated from a pilot class teacher program in English that started at the University of Helsinki in the middle of the 1990 s. The bilingual subject teachers are not trained in English but they have learned English elsewhere, which is a particular focus of interest in this study because it is expected that a great number of CLIL teachers in Finland do not have actual studies in English philology. The research method is interview and this is a qualitative case study. The interviews are recorded and transcribed for the ease of analysis. The English teachers do not always use English in their lessons and they would not feel confident in teaching another subject completely in English. All of the CLIL teachers trust their English skills in teaching, but the bilingual class teachers also use Finnish during lessons either because some teaching material is in Finnish, or they feel that rules and instructions are understood better in mother tongue or students English skills are not strong enough. One of the bilingual subject teachers is the only one who consciously uses only English in teaching and in discussions with students. Although teachers good English skills are generally considered important, only the teachers who have graduated from the class teacher education in English consider it important that CLIL teachers would have studies in English philology. Regarding the subject teacher education program in English, the respondents hope that its teachers will have strong enough English skills and that it will deliver what it promises. Having student teachers of different subjects studying together is considered beneficial. The results of the study show that acquiring teaching material in English continues to be the teachers own responsibility and a huge burden for the teachers, and there has, in fact, not been much progress in the matter since the beginning of CLIL education. The bilingual subject teachers think, however, that using one s own material can give new inspiration to teaching and enable the use of various pedagogical methods. Although it is questionable if the language competence requirements set for CLIL teachers by the Finnish Ministry of Education are not adhered to, it becomes apparent in the study that studies in English philology do not necessarily guarantee strong enough language skills for CLIL teaching, but teachers own personality and self-confidence have significance. Keywords: CLIL, bilingual education, English, subject teacher training, subject teacher education in English, STEP

Media Education in the Finnish School System : A Conceptual Analysis of the Subject Didactic Dimension of Media Education

The aim of the doctoral dissertation was to further our theoretical and empirical understanding of media education as practised in the context of Finnish basic education. The current era of intensive use of the Internet is recognised too. The doctoral dissertation presents the subject didactic dimension of media education as one of the main results of the conceptual analysis. The theoretical foundation is based on the idea of dividing the concept of media education into media and education (Vesterinen et al., 2006). As two ends of the dimension, these two can be understood didactically as content and pedagogy respectively. In the middle, subject didactics is considered to have one form closer to content matter (Subject Didactics I learning about media) and another closer to general pedagogical questions (Subject Didactics II learning with/through media). The empirical case studies of the dissertation are reported with foci on media literacy in the era of Web 2.0 (Kynäslahti et al., 2008), teacher reasoning in media educational situations (Vesterinen, Kynäslahti - Tella, 2010) and the research methodological implications of the use of information and communication technologies in the school (Vesterinen, Toom - Patrikainen, 2010). As a conclusion, Media-Based Media Education and Cross-Curricular Media Education are presented as two subject didactic modes of media education in the school context. Episodic Media Education is discussed as the third mode of media education where less organised teaching, studying and learning related to media takes place, and situations (i.e. episodes, if you like) without proper planning or thorough reflection are in focus. Based on the theoretical and empirical understanding gained in this dissertation, it is proposed that instead of occupying a corner of its own in the school curriculum, media education should lead the wider change in Finnish schools.

Freezing of a colloidal liquid subject to shear flow

A nonequilibrium generalization of the density-functional theory of freezing is proposed to investigate the shear-induced first-order phase transition in colloidal suspensions. It is assumed that the main effect of a steady shear is to break the symmetry of the structure factor of the liquid and that for small shear rate, the phenomenon of a shear-induced order-disorder transition may be viewed as an equilibrium phase transition. The theory predicts that the effective density at which freezing takes place increases with shear rate. The solid (which is assumed to be a bcc lattice) formed upon freezing is distorted and specifically there is less order in one plane compared with the order in the other two perpendicular planes. It is shown that there exists a critical shear rate above which the colloidal liquid does not undergo a transition to an ordered (or partially ordered) state no matter how large the density is. Conversely, above the critical shear rate an initially formed bcc solid always melts into an amorphous or liquidlike state. Several of these predictions are in qualitative agreement with the light-scattering experiments of Ackerson and Clark. The limitations as well as possible extensions of the theory are also discussed.