Swi5 Controls a Novel Wave of Cyclin Synthesis in Late Mitosis

We have shown previously that the Swi5 transcription factor regulates the expression of the SIC1 Cdk inhibitor in late mitosis. This suggests that Swi5 might control other genes with roles in ending mitosis. We identified a gene with a Swi5-binding site in the promoter that encoded a protein with high homology to Pcl2, a cyclin-like protein that associates with the Cdk Pho85. This gene, PCL9, is indeed regulated by Swi5 in late M phase, the only cyclin known to be expressed at this point in the cell cycle. The Pcl9 protein is associated with a Pho85-dependent protein kinase activity, and the protein is unstable with peak levels occurring in late M phase. PCL2 is already known to be expressed in late G1 and we find that, in addition, it is also regulated by Swi5 in telophase. The expression of PCL2 and PCL9 at this stage of the cell cycle implies a role for the Pho85 Cdk at the end of mitosis. Consistent with this a synthetic interaction was observed between pho85Δ and strains deleted for SIC1, SWI5, and SPO12. These and other studies support the notion that the M/G1 switch is a major cell cycle transition.

DANA elements: a family of composite, tRNA-derived short interspersed DNA elements associated with mutational activities in zebrafish (Danio rerio).

DNA is the first SINE isolated from zebrafish (Danio rerio) exhibiting all the hallmarks of these tRNA-derived elements. DANA is unique in its clearly defined substructure of distinct cassettes. In contrast to generic SINE elements, DANA appears to have been assembled by insertions of short sequences into a progenitor, tRNA-derived element. Once associated with each other, these subunits were amplified as a new transposable element with such a remarkable success that DANA-related sequences comprise approximately 10% of the modern zebrafish genome. At least some of the sequences comprised by the full-length element were capable of movement, forming a new group of mobile, composite transposons, one of which caused an insertional mutation in the zebrafish no tail gene. Being present only in the genus Danio, and estimated to be as old as the genus itself, DANA may have played a role in Danio speciation by massive amplification and genome-wide dispersion. There are extensive DNA polymorphisms between zebrafish populations and strains detected by PCR amplification using primers specific to DANA, suggesting that the DANA element will be useful as a molecular tool for genetic and phylogenetic analyses.

Monitoramento da interação entre rizobactéria RZ2MS16 (Burkholderia ambifaria) promotora de crescimento e bioinoculantes comerciais aplicados nas culturas de soja e milho

As culturas da soja e milho são de grande importância econômica mundial e também para o Brasil, onde a área cultivada com essas duas culturas está estimada em 45.855.900 mil hectares, distribuídas em todos estados produtores conforme suas características. A estimativa da safra mundial de soja em 2015/16 apresentou uma redução na produção global da oleaginosa para 319,0 milhões de ton, volume 1,1 milhão de ton inferior ao levantamento de dezembro de 2015. Ainda assim, trata-se de um volume recorde. Para o milho, a produção global foi de 967,9 milhões de ton, com uma redução no volume de 5,9 milhões de ton em relação ao levantamento realizado em dezembro de 2015. Nessas duas culturas são comumente utilizadas bactérias fixadoras de nitrogênio (BFN), reduzindo ou até mesmo, eliminando a aplicação de adubos nitrogenados. Estudos apontam que a simbiose entre BFN e as culturas soja e milho pode ser otimizada mediante a coinoculação com rizobatérias promotoras de crescimento de plantas (RPCP). Apesar de promissora, o estudo da utilização de BFN em associação com RPCPs é incipiente no Brasil. Assim, o presente trabalho teve como objetivo monitorar, a partir da marcação bacteriana, a interação entre a linhagem de Burkholderia ambifaria (RZ2MS16), uma rizobactéria proveniente do guaranazeiro e previamente descrita como promotora de crescimento em soja e milho e linhagens das espécies Bradyrhizobium japonicum (SEMIA5079), Bradyrhizobium diazoefficiens (SEMIA5080) e Azospirillum brasilense (Ab-v5 e Ab-v6) que são comercialmente utilizadas como bioinoculantes nessas culturas respectivamente. Os efeitos sinergisticos da interação entre RZ2MS16 e bioinoculantes comercias foram avaliados em experimento de casa de vegetação. Também foi avaliado o efeito da coinoculação de bioinculantes com outra rizobactéria proveniente do guaranazeiro, Bacillus sp. (RZ2MS9). As linhagens foram inoculadas separadamente e coinoculadas, sendo melhores resultados observados com a coinoculação das linhagens. As linhagens marcadas com genes de fluorescência selecionadas para estudo de interação foram RZ2MS16, Ab-v5 e SEMIA5080, sendo essa interação observada por microscopia de fluorescência, com também pelo reisolamento das linhagens marcadas. As linhagens RZ2MS16:pNKGFP e Ab-v5: pWM1013 e SEMIA5080:pWM1013 colonizaram todos os nichos avaliados em milho e soja, respectivamente, sendo também caracterizadas como endofíticos. Assim se observa que estudos desta natureza são de grande importância para um melhor entendimento da interação entre bactéria planta e o efeito da coinoculação no melhor desenvolvimento de plantas comercialmente utilizadas.

Estudo do processo de formação do cavaco durante o torneamento e sua relação com a microestrutura utilizando o método dos elementos finitos.

O objetivo desse trabalho foi avaliar o processo de formação do cavaco durante o torneamento utilizando simulação numérica pelo método dos elementos finitos. Para realizar o estudo foram definidos dois tipos de aços inoxidáveis austeníticos, um com matriz metálica sem a presença significativa de inclusões, do tipo ABNT 304, e outro com a presença de inclusões não metálicas, do tipo ABNT 303. O estudo foi focado nos mecanismos de formação e ruptura do cavaco, na determinação das forças de usinagem, no campo de tensões, deformações, e temperaturas durante o processo, que foram relacionados com aspectos e características da microestrutura do material. Os resultados obtidos foram comparados com as forças de usinagem experimentais, com a espessura e morfologia do cavaco. O desenvolvimento do trabalho, de acordo com a metodologia adotada, foi realizado em diferentes etapas. Inicialmente foi elaborado e aplicado um modelo de simulação da usinagem considerando o material homogêneo. Em outra etapa, foi realizada a modelagem de uma microestrutura submetida a um estado de tensão e deformação semelhante ao encontrado na simulação da usinagem realizada com material homogêneo. Os resultados mostraram que as partículas das inclusões maiores, alongadas, e em maior quantidade aumentam a tensão e a deformação na microestrutura. As elevadas temperaturas obtidas na usinagem dos aços inoxidáveis austeníticos aumentam a ductilidade dos sulfetos, esses se deformam em compressão junto com a matriz, e têm um efeito limitado como agente de redução dos esforços de usinagem. Por outro lado, os sulfetos facilitam a etapa de ruptura do cavaco em tensões trativas, e tendem a se romper facilitando o processo de quebra.

Modelling comminution patterns within a pilot scale AG/SAG mill

The patterns of rock comminution within tumbling mills, as well as the nature of forces, are of significant practical importance. Discrete element modelling (DEM) has been used to analyse the pattern of specific energy applied to rock, in terms of spatial distribution within a pilot AG/SAG mill. We also analysed in some detail the nature of the forces, which may result in rock comminution. In order to examine the distribution of energy applied within the mill, the DEM models were compared with measured particle mass losses, in small scale AG and SAG mill experiments. The intensity of contact stresses was estimated using the Hertz theory of elastic contacts. The results indicate that in the case of the AG mill, the highest intensity stresses and strains are likely to occur deep within the charge, and close to the base. This effect is probably more pronounced for large AG mills. In the SAG mill case, the impacts of the steel balls on the surface of the charge are likely to be the most potent. In both cases, the spatial pattern of medium-to-high energy collisions is affected by the rotational speed of the mill. Based on an assumed damage threshold for rock, in terms of specific energy introduced per single collision, the spatial pattern of productive collisions within each charge was estimated and compared with rates of mass loss. We also investigated the nature of the comminution process within AG vs. SAG mill, in order to explain the observed differences in energy utilisation efficiency, between two types of milling. All experiments were performed using a laboratory scale mill of 1.19 m diameter and 0.31 m length, equipped with 14 square section lifters of height 40 mm. (C) 2006 Elsevier Ltd. All rights reserved.

Molecular discrimination of taeniid cestodes :

DNA approaches are now being used routinely for accurate identification of Echinococcus and Taenia species, subspecies and strains, and in molecular epidemiological surveys of echinococcosis/taeniasis in different geographical settings and host assemblages. The publication of the complete sequences of the mitochondrial (int) genomes of E. granulosus, E. multilocularis, T solium and Asian Taenia, and the availability of mtDNA sequences for a number of other taeniid genotypes, has provided additional genetic information that can be used for more in depth phylogenetic and taxonomic studies of these parasites. This very rich sequence information has provided a solid molecular basis, along with a range of different biological, epidemiological, biochemical and other molecular-genetic criteria, for revising the taxonomy of the genus Echinococcus and for estimating the evolutionary time of divergence of the various taxa. Furthermore, the accumulating genetic data has allowed the development of PCR-based tests for unambiguous identification of Echinococcus eggs in the faeces of definitive hosts and in the environment. Molecular phylogenies derived from mtDNA sequence comparisons of geographically distributed samples of T solium provide molecular evidence for two genotypes, one being restricted to Asia, with the other occurring in Africa and America. Whether the two genetic forms of T solium differ in important phenotypic characteristics remains to be determined. As well, minor DNA sequence differences have been reported between isolates of T saginata and Asian Taenia. There has been considerable discussion over a number of years regarding the taxonomic position of Asian Taenia and whether it should be regarded as a genotype, strain, subspecies or sister species of T saginata. The available molecular genetic data do not support independent species status for Asian Taenia and T saginata. What is in agreement is that both taxa are closely related to each other but distantly related to T solium. This is important in public health terms as it predicts that cysticercosis in humans attributable to Asian Taenia does not occur, because cysticercosis is unknown in T saginata. (C) 2005 Elsevier Ireland Ltd. All rights reserved.

Mechanical properties of sheet metal under forming conditions

In the bulge test, a sheet metal specimen is clamped over a circular hole in a die and formed into a bulge by the hydraulic pressure on one side of the specirnen. As the unsupported part of the specimen is deformed in this way, its area is increased, in other words, the material is generally stretched and its thickness generally decreased. The stresses causing this stretching action are the membrane stresses in the shell generated by the hydraulic pressure, in the same way as the rubber in a toy balloon is stretched by the membrane stresses caused by the air inside it. The bulge test is a widely used sheet metal test, to determine the "formability" of sheet materials. Research on this forming process (2)-(15)* has hitherto been almost exclusively confined to predicting the behaviour of the bulged specimen through the constitutive equations (stresses and strains in relation to displacements and shapes) and empirical work hardening characteristics of the material as determined in the tension test. In the present study the approach is reversed; the stresses and strains in the specimen are measured and determined from the geometry of the deformed shell. Thus, the bulge test can be used for determining the stress-strain relationship in the material under actual conditions in sheet metal forming processes. When sheet materials are formed by fluid pressure, the work-piece assumes an approximately spherical shape, The exact nature and magnitude of the deviation from the perfect sphere can be defined and measured by an index called prolateness. The distribution of prolateness throughout the workpiece at any particular stage of the forming process is of fundamental significance, because it determines the variation of the stress ratio on which the mode of deformation depends. It is found. that, before the process becomes unstable in sheet metal, the workpiece is exactly spherical only at the pole and at an annular ring. Between the pole and this annular ring the workpiece is more pointed than a sphere, and outside this ring, it is flatter than a sphere. In the forming of sheet materials, the stresses and hence the incremental strains, are closely related to the curvatures of the workpiece. This relationship between geometry and state of stress can be formulated quantitatively through prolateness. The determination of the magnitudes of prolateness, however, requires special techniques. The success of the experimental work is due to the technique of measuring the profile inclination of the meridional section very accurately. A travelling microscope, workshop protractor and surface plate are used for measurements of circumferential and meridional tangential strains. The curvatures can be calculated from geometry. If, however, the shape of the workpiece is expressed in terms of the current radial (r) and axial ( L) coordinates, it is very difficult to calculate the curvatures within an adequate degree of accuracy, owing to the double differentiation involved. In this project, a first differentiation is, in effect, by-passed by measuring the profile inclination directly and the second differentiation is performed in a round-about way, as explained in later chapters. The variations of the stresses in the workpiece thus observed have not, to the knowledge of the author, been reported experimentally. The static strength of shells to withstand fluid pressure and their buckling strength under concentrated loads, both depend on the distribution of the thickness. Thickness distribution can be controlled to a limited extent by changing the work hardening characteristics of the work material and by imposing constraints. A technique is provided in this thesis for determining accurately the stress distribution, on which the strains associated with thinning depend. Whether a problem of controlled thickness distribution is tackled by theory, or by experiments, or by both combined, the analysis in this thesis supplies the theoretical framework and some useful experimental techniques for the research applied to particular problems. The improvement of formability by allowing draw-in can also be analysed with the same theoretical and experimental techniques. Results on stress-strain relationships are usually represented by single stress-strain curves plotted either between one stress and one strain (as in the tension or compression tests) or between the effective stress and effective strain, as in tests on tubular specimens under combined tension, torsion and internal pressure. In this study, the triaxial stresses and strains are plotted simultaneously in triangular coordinates. Thus, both stress and strain are represented by vectors and the relationship between them by the relationship between two vector functions. From the results so obtained, conclusions are drawn on both the behaviour and the properties of the material in the bulge test. The stress ratios are generally equal to the strain-rate ratios (stress vectors collinear with incremental strain vectors) and the work-hardening characteristics, which apply only to the particular strain paths are deduced. Plastic instability of the material is generally considered to have been reached when the oil pressure has attained its maximum value so that further deformation occurs under a constant or lower pressure. It is found that the instability regime of deformation has already occurred long before the maximum pressure is attained. Thus, a new concept of instability is proposed, and for this criterion, instability can occur for any type of pressure growth curves.

Do stressful times call for team-based working? A study of psychiatric nurses in UK mental healthcase

Background: Team-based working is now an inherent part of effective health care delivery. Previous research has identified that team working is associated with positive mental health and well-being outcomes for individuals operating in an effective team environment. This is a particularly important topic in the health services context, although little empirical attention has been paid to mental-health services. Psychiatric nurses work on a day-to-day basis with a particularly stressful and demanding client group in an environment which is characterised by high demands, uncertainty, and limited resources. This paper specifically focuses on psychiatric nurses working in National Health Service (NHS) and casts some light on the ways in which effective team-based working can help to alleviate a number of occupational stressors and strains. Method: A questionnaire method (2005 NHS Staff Survey) was employed to collect data from 6655 psychiatric nurses from 64 different NHS Trusts. The hypotheses were concerned with four overall measures from the survey; effective team working, occupational stress, work pressure and social support. Hypothesis 1 stated that effective team working will have a significant negative relationship with occupational stress and work pressure. Further, Hypothesis 2 stated that social support from supervisors and co-workers will moderate this relationship. Findings: Data was treated with a series of regression analyses. For Hypothesis 1, working in a real team did have main effects on work pressure and accounted for 1.6 per cent of the variance. Using the Nagelkerke R square value, working in a real team also had main effects on occupational stress an accounted for approximately 2.8 per cent of the variance. Further, the Exp (B) value of 0.662 suggests that the odds of suffering from occupational stress are cut by 33.8 per cent when a psychiatric nurse works in a real team. Results failed to provide support for Hypothesis 2. The analysis then went on to adopt a unique approach for assessing the extent of real team-based working, distinguishing between real teams, and a number of pseudo team typologies, as well as the absence of teamwork all together. As was hypothesised, results demonstrated that psychiatric nurses working in real teams (ones with clear objectives, where-by team members work closely with one another to achieve team objectives and meet regularly to discuss team effectiveness and how it can be improved) experienced the lowest levels of stress and work pressure of the sample. However, contrary to prediction, results indicated that psychiatric nurses working in any type of pseudo team actually experienced significantly higher levels of stress and work pressure than those who did not report as working in a team at all. Discussion: These findings have serious implications for NHS Mental Health Trusts, which may not be implementing, structuring and managing their nursing teams adequately. Indeed, results suggest that poorly-structured team work may actually facilitate stress and pressure in the workplace. Conversely, well-structured real teams serve to reduce stress and work pressure, which in turn not only enhances the working lives and well-being of psychiatric nurses, but also greatly improves the service that the NHS provides to its users.

Stressful times call for team-based measures:psychiatric nursing in the UK National Health Service

Background: Team-based working is now an inherent part of effective health care delivery. Previous research has identified that team working is associated with positive mental health and well-being outcomes for individuals operating in an effective team environment. This is a particularly important topic in the health services context, although little empirical attention has been paid to mental-health services. Psychiatric nurses work on a day-to-day basis with a particularly stressful and demanding client group in an environment which is characterised by high demands, uncertainty, and limited resources. This paper specifically focuses on psychiatric nurses working in National Health Service (NHS) and casts some light on the ways in which effective team-based working can help to alleviate a number of occupational stressors and strains. Method: A questionnaire method (2005 NHS Staff Survey) was employed to collect data from 6655 psychiatric nurses from 64 different NHS Trusts. The hypotheses were concerned with four overall measures from the survey; effective team working, occupational stress, work pressure and social support. Hypothesis 1 stated that effective team working will have a significant negative relationship with occupational stress and work pressure. Further, Hypothesis 2 stated that social support from supervisors and co-workers will moderate this relationship. Findings: Data was treated with a series of regression analyses. For Hypothesis 1, working in a real team did have main effects on work pressure and accounted for 1.6 per cent of the variance. Using the Nagelkerke R square value, working in a real team also had main effects on occupational stress an accounted for approximately 2.8 per cent of the variance. Further, the Exp (B) value of 0.662 suggests that the odds of suffering from occupational stress are cut by 33.8 per cent when a psychiatric nurse works in a real team. Results failed to provide support for Hypothesis 2. The analysis then went on to adopt a unique approach for assessing the extent of real team-based working, distinguishing between real teams, and a number of pseudo team typologies, as well as the absence of teamwork all together. As was hypothesised, results demonstrated that psychiatric nurses working in real teams (ones with clear objectives, where-by team members work closely with one another to achieve team objectives and meet regularly to discuss team effectiveness and how it can be improved) experienced the lowest levels of stress and work pressure of the sample. However, contrary to prediction, results indicated that psychiatric nurses working in any type of pseudo team actually experienced significantly higher levels of stress and work pressure than those who did not report as working in a team at all. Discussion: These findings have serious implications for NHS Mental Health Trusts, which may not be implementing, structuring and managing their nursing teams adequately. Indeed, results suggest that poorly-structured team work may actually facilitate stress and pressure in the workplace. Conversely, well-structured real teams serve to reduce stress and work pressure, which in turn not only enhances the working lives and well-being of psychiatric nurses, but also greatly improves the service that the NHS provides to its users.

Anarchy In The Airways

In his dialogue - Anarchy In The Airways - Joseph C. Von Kornfeld, Assistant Professor, College of Hotel Administration, University of Nevada, Las Vegas initially states: “Deregulation of the airline industry has brought about financial vulnerability for the traveling public. The author analyzes the situation since that point in time and makes recommendations for some solutions.” In this article, Assistant Professor Von Kornfeld, first defines the airline industry in its pre-regulated form. Then he goes into the ramifications and results of deregulating the industry, both in regards to the consumer, and in deregulation’s impact on the airlines themselves. “The most dramatic consequence of the pressures and turbulence of airline deregulation has been the unprecedented proliferation of airline bankruptcies,” Von Kornfeld informs. “Prior to the deregulation of the U.S. airline industry in 1978, U.S. air carriers operated in a business environment that was insulated from the normal stresses and strains of open competition. They were restricted from actively competing with fares and routings by the Civil Aeronautics Board (CAB),” Von Kornfeld says. In leveling the playing field, Von Kornfeld offers, “Each carrier was restricted to specific geographic routes, with those routes limited to two or three competing carriers. The only thing that set carriers apart in this CAB defined atmosphere was their ability to either advertise, or to enhance their level of service; or both. “…ultimately paid for by the passenger through fare increases sanctioned by the CAB,” Von Kornfeld states. “Airline service standards were unquestionably superior during the regulated environment,” Von Kornfeld renders an interesting observation. He does mention, however, that carrier safety was also considered a concern immediately prior to, and then after deregulation. “The major controversy focused on the allegation that safety and maintenance standards would be compromised due to the financial pressures brought about by an openly competitive environment,” Von Kornfeld says. Pricing, as well as labor unions are important factors in the equation, and Von Kornfeld addresses their relevance in the deregulated environment. “The primary rationalization for deregulation was to facilitate a more openly competitive environment. The increased competition was to ultimately have benefitted the consumer. Ironically, that’s not entirely the case, Von Kornfeld elaborates. In addressing some of the negative aspects of airline deregulation, Von Kornfeld suggests that some sort of federal re-regulation may be in order.

Responses of the Emiliania huxleyi Proteome to Ocean Acidification

Ocean acidification due to rising atmospheric CO2 is expected to affect the physiology of important calcifying marine organisms, but the nature and magnitude of change is yet to be established. In coccolithophores, different species and strains display varying calcification responses to ocean acidification, but the underlying biochemical properties remain unknown. We employed an approach combining tandem mass-spectrometry with isobaric tagging (iTRAQ) and multiple database searching to identify proteins that were differentially expressed in cells of the marine coccolithophore species Emiliania huxleyi (strain NZEH) between two CO2 conditions: 395 (~current day) and ~1340 p.p.m.v. CO2. Cells exposed to the higher CO2 condition contained more cellular particulate inorganic carbon (CaCO3) and particulate organic nitrogen and carbon than those maintained in present-day conditions. These results are linked with the observation that cells grew slower under elevated CO2, indicating cell cycle disruption. Under high CO2 conditions, coccospheres were larger and cells possessed bigger coccoliths that did not show any signs of malformation compared to those from cells grown under present-day CO2 levels. No differences in calcification rate, particulate organic carbon production or cellular organic carbon: nitrogen ratios were observed. Results were not related to nutrient limitation or acclimation status of cells. At least 46 homologous protein groups from a variety of functional processes were quantified in these experiments, of which four (histones H2A, H3, H4 and a chloroplastic 30S ribosomal protein S7) showed down-regulation in all replicates exposed to high CO2, perhaps reflecting the decrease in growth rate. We present evidence of cellular stress responses but proteins associated with many key metabolic processes remained unaltered. Our results therefore suggest that this E. huxleyi strain possesses some acclimation mechanisms to tolerate future CO2 scenarios, although the observed decline in growth rate may be an overriding factor affecting the success of this ecotype in future oceans.

Aplicação do método de Elementos Finitos eXtendido (MEFX) para a previsão da resistência de juntas adesivas de sobreposição dupla

As ligações adesivas têm sido utilizadas em diversas áreas de aplicação. A utilização das juntas adesivas em aplicações industriais tem vindo a aumentar nos últimos anos, por causa das vantagens significativas que apresentam comparativamente com os métodos tradicionais de ligação tais como soldadura, ligações aparafusadas e rebitadas. A redução de peso, redução de concentrações de tensões e facilidade de fabrico são algumas das principais vantagens das ligações adesivas. Devido à crescente utilização das ligações adesivas, torna-se necessário a existência de ferramentas que permitam prever a resistência das juntas com elevada precisão. Assim, para a análise de juntas adesivas, está a ser cada vez mais utilizado o método de Elementos Finitos. Neste âmbito o Método de Elementos Finitos eXtendido (MEFX) perfila-se como um método capaz de prever o comportamento da junta, embora este ainda não esteja convenientemente estudado no que diz respeito à aplicação a juntas adesivas. Neste trabalho é apresentado um estudo experimental e numérico pelo MEFX de juntas de sobreposição dupla, nas quais são aplicados adesivos que variam desde frágeis e rígidos, como o caso do Araldite® AV138, até adesivos mais dúcteis, como o Araldite® 2015 e o Sikaforce® 7888. Foram considerados substratos de alumínio (AW6082-T651) em juntas com diferentes comprimentos de sobreposição, sendo sujeitos a esforços de tração de forma a avaliar o seu desempenho. Na análise numérica foi realizada uma análise da distribuição de tensões na camada adesiva, a previsão da resistência das juntas pelo MEFX segundo critérios de iniciação de dano baseados em tensões e deformações, e ainda um estudo sobre o critério energético de propagação de dano. A análise por MEFX revelou que este método é bastante preciso quando usados os critérios de iniciação de dano MAXS e QUADS, e parâmetro com valor de 1 no critério energético de propagação de dano. Apesar de ser um método pouco estudado na literatura comparativamente com outros, o MEFX apresentou resultados muito satisfatórios.

Trypanosoma Cruzi Strains From Triatomine Collected In Bahia And Rio Grande Do Sul, Brazil.

Collection of triatomines in domestic, peridomestic and sylvatic environments in states of Bahia and Rio Grande do Sul, Northeastern and Southern Brazil respectively, and isolation of Trypanosoma cruzi strains. First, the captured triatomines were identified using insect identification keys, then their intestinal content was examined by abdominal compression, and the samples containing trypanosomatid forms were inoculated in LIT medium and Swiss mice. Six triatomine species were collected in cities in Bahia, namely Panstrongylus geniculatus (01), Triatoma melanocephala (11), T. lenti (94), T. pseudomaculata (02), T. sherlocki (26) and T. sordida (460), and two in cities in Rio Grande do Sul, namely T. circummaculata (11) and T. rubrovaria (115). Out of the specimens examined, T. cruzi was isolated from 28 triatomine divided into four different species: T. melanocephala (one), T. lenti (one), T. rubrovaria (16) and T. sordida (10). Their index of natural infection by T. cruzi was 6.4%. The isolation of T. cruzi strains from triatomines found in domestic and peridomestic areas shows the potential risk of transmission of Chagas disease in the studied cities. The maintenance of those T. cruzi strains in laboratory is intended to promote studies that facilitate the understanding of the parasite-vector-host relationship.

Isolation of Pseudomonas aeruginosa strains from dental office environments and units in Barretos, state of São Paulo, Brazil, and analysis of their susceptibility to antimicrobial drugs

A wide variety of opportunistic pathogens has been detected in the tubing supplying water to odontological equipment, in special in the biofilm lining of these tubes. Among these pathogens, Pseudomonas aeruginosa, one of the leading causes of nosocomial infections, is frequently found in water lines supplying dental units. In the present work, 160 samples of water, and 200 fomite samples from forty dental units were collected in the city of Barretos, State of São Paulo, Brazil and evaluated between January and July, 2005. Seventy-six P. aeruginosa strains, isolated from the dental environment (5 strains) and water system (71 strains), were tested for susceptibility to six antimicrobial drugs most frequently used against P. aeruginosa infections. Susceptibility to ciprofloxacin, followed by meropenem was the predominant profile. The need for effective means of reducing the microbial burden within dental unit water lines is emphasized, and the risk of exposure and cross-infection in dental practice, in special when caused by opportunistic pathogens like P. aeruginosa, are highlighted.

Effects of nitrate and phosphate availabilities on growth, photosynthesis and pigment and protein contents in colour strains of Hypnea musciformis (Wulfen in Jacqu.) J.V. Lamour. (Gigartinales, Rhodophyta)

In Brazil, Hypnea musciformis is the main raw material for carrageenan production and the knowledge of nitrogen and phosphorus metabolism in algae is critical for the success of cultivation because these elements can limit seaweed productivity. Thus, the objective of this study was to evaluate the effects of nitrate (zero to 100 μM) and nitrate plus phosphate (zero to 25 μM) availabilities on the growth, the contents of photosynthetic pigments (phycobiliproteins and chlorophyll a) and proteins, and the photosynthesis and respiration of the brown (BR) and light green (LG) strains of H. musciformis. The results revealed metabolic differences between the colour strains of H. musciformis for nitrogen metabolism: upon nitrate addition, the LG strain stored nitrogen mainly as proteins, while the BR strain stored it as proteins and pigments. Moreover, the respiration of the LG strain and the photosynthesis of the BR strain increased with nitrate concentrations, indicating that the BR strain fixed more photosynthetic carbon than the LG strain.