Age, growth, and mortality of the Mayan cichlid (Cichlasoma urophthalmus) from the southeastern Everglades

Mayan cichlids (Cichlasoma urophthalmus) were collected monthly from March 1996 to October 1997 with hook-and-line gear at Taylor River, Florida, an area within the Crocodile Sanctuary of Everglades National Park, where human activities such as fishing are prohibited. Fish were aged by examining thin-sectioned otoliths, and past size-at-age information was generated by using back-calculation techniques. Marginal increment analysis showed that opaque growth zones were annuli deposited between January and May. The size of age-1 fish was estimated to be 33–66 mm standard length (mean=45.5 mm) and was supported by monthly length-frequency data of young-of-year fish collected with drop traps over a seven-year period. Mayan cichlids up to seven years old were observed. Male cichlids grew slower but achieved a larger size than females. Growth was asymptotic and was modeled by the von Bertalanffy growth equation Lt=263.6(1–exp[–0.166(t–0.001)]) for males (r2=0.82, n=581) and Lt=215.6 (1–exp[–0.197(t–0.058)]) for females (r2= 0.77, n=639). Separate estimates of total annual mortality were relatively consistent (0.44–0.60) and indicated moderate mortality at higher age classes, even in the absence of fishing mortality. Our data indicated that Mayan cichlids grow slower and live longer in Florida than previously reported from native Mexican habitats. Because the growth of Mayan cichlids in Florida periodically slowed and thus produced visible annuli, it may be possible to age introduced populations of other subtropical and tropical cichlids in a similar way.

Estimated ages of red porgy (Pagrus pagrus) from fishery-dependent and fishery-independent data and a comparison of growth parameters

The red porgy, Pagrus pagrus, is an important reef fish in several offshore fisheries along the southeastern United States. We examined samples from North Carolina through southeast Florida from recreational (headboat) and commercial (hook and line) fisheries, as well as samples from a fishery-independent source. Red porgy attain a maximum age of at least 18 years and 733 mm total length. The weight-length relationship is represented by the ln-ln transformed equation: W = 8.85 × 10–6(L)3.06, where W = whole weight in grams, and L = total length in mm. The von Bertalanffy growth equation fitted to the most recent, back-calculated lengths from all the samples is Lt = 644(1 – e –0.15(t + 0.76)). Our study revealed a difference in mean length at age of red porgy from the three sources. Red porgy in fishery-independent collections were smaller at age than specimens examined from fishery-dependent sources. The difference in length-at-age may be related to gear selectivity and have important consequences in the assessment of fish stocks.

Preliminary report on experimental fishing with purse seine and lampara nets for small pelagic fish varieties around Sri Lanka

Government of Sri Lanka initiated a project for conducting a experimental skipjack fishery using modern pole and line method and an experimental fishery for live bait and small pelagic fish using purse seine and lampara nets, with the, assistance of UNDP and FAO. Accordingly, the survey for small pelagic fish varieties using the purse seine and lampara nets commenced in April, 1972 and will continue until the end of 1975. This paper is a preliminary report on the results of the survey carried out between Septernber 1972 to October 1978.

Pelagic fishery resources of Sri Lanka and its present level of exploitation with special reference to off-shore and deep-sea waters

Pelagic resources around Sri Lanka may be categorized into three major groups: (1) the small pelagic varieties such as the sprats, halmessa, sardines (salaya, soodaya), and herrings (hurulla). (2) the medium size pelagic species such as the mackerel (kumbala and bolla), barracuda (jeela), seer Spanish mackerel (thora), frigate mackeral (alagoduwa), mackerel tuna (atawalla) and the skipjack (balaya). (3) the large size fishes such as yellow fin tuna (kelawalla), big eye tuna, marlins (koppora and gappara), sail fish (thalapath), sharks (mora) and rays (maduwa). Production levels of exploited resources are noted, and seasonal patterns and annual in their abundance are considered. On the basis of observations and estimations of the existing fisheries, and the results of experimental fishing, figures are presented of the potential yield of those species already exploited. The development of that potential depends on the development of modern techniques of pole and line fishing, application of tuna longline and shark longline, increasing the number of units of drift nets and the introduction of a bait fishery for the longline and pole line fishery. Some features upon which the successes of any venture to exploit such resources are noted, particularly those which relate to the nature of the fishing vessels used.

Fishing gear and methods for off-shore fishing in Sri Lanka

The author describes the commercial viable off-shore fishing methods for catching known commercial resources available around Sri Lanka. He also describes the in-shore fishing methods such as bait fishery which are related and of prime importance for carrying out certain off-shore methods. The paper is intended as a background for the description of fishing methods. The methods discussed are: (1) Longlining for large pelagic species such as large tuna (yellow fin, big eye), shark, spearfish and others; (2) Drift-netting for small and large tuna species (skipjack, yellow fin and others), shark, spearfish, etc.; (3) Pole and line for all deep-sea pelagic species such as skipjack, yellow fin, frigate mackerel, etc.; and (4) Purse seining (small scale) for small pelagic species suitable as bait fish for pole and line and longline fisheries.

The use of object oriented modelling and simulation tools in constraint satisfaction for embodiment design

The software package Dymola, which implements the new, vendor-independent standard modelling language Modelica, exemplifies the emerging generation of object-oriented modelling and simulation tools. This paper shows how, in addition to its simulation capabilities, it may be used as an embodiment design tool, to size automatically a design assembled from a library of generic parametric components. The example used is a miniature model aircraft diesel engine. To this end, the component classes contain extra algebraic equations calculating the overload factor (or its reciprocal, the safety factor) for all the different modes of failure, such as buckling or tensile yield. Thus the simulation results contain the maximum overload or minimum safety factor for each failure mode along with the critical instant and the device state at which it occurs. The Dymola "Initial Conditions Calculation" function, controlled by a simple software script, may then be used to perform automatic component sizing. Each component is minimised in mass, subject to a chosen safety factor against failure, over a given operating cycle. Whilst the example is in the realm of mechanical design, it must be emphasised that the approach is equally applicable to the electrical or mechatronic domains, indeed to any design problem requiring numerical constraint satisfaction.

Red-Green-Blue 2D tuneable liquid crystal laser devices

In this paper, we review our recent experimental work on coherent and blue phase liquid crystal lasers.We will present results on thin-film photonic band edge lasing devices using dye-doped low molar mass liquid crystals in self-organised chiral nematic and blue phases. We show that high Q-factor lasers can be achieved in these materials and demonstrate that a single mode output with a very narrow line width can be readily achievable in well-aligned mono-domain samples. Further, we have found that the performance of the laser, i.e. the slope efficiency and the excitation threshold, are dependent upon the physical parameters of the low molar mass chiral nematic liquid crystals. Specifically, slope efficiencies greater than 60% could be achieved depending upon the materials used and the device geometry employed. We will discuss the important parameters of the liquid crystal host/dye guest materials and device configuration that are needed to achieve such high slope efficiencies. Further we demonstrate how the wavelength of the laser can be tuned using an in-plane electric field in a direction perpendicular to the helix axis via a flexoelectric mechanism as well as thermally using thermochromic effects. We will then briefly outline data on room temperature blue phase lasers and further show how liquid crystal/lenslet arrays have been used to demonstrate 2D laser emission of any desired wavelength. Finally, we present preliminary data on LED/incoherent pumping of RG liquid crystal lasers leading to a continuous wave output. © 2009 SPIE.

Present status of harvesting, transportation and marketing of freshwater Small Indigenous Species of Fish (SIS) of Bangladesh

A survey conducted to evaluate the present status of harvesting, transportation and marketing of freshwater SIS of Bangladesh showed that among the 56 to 73 species of small indigenous fish species (SIS), mola (Amblypharyngodon mola), dhela (Osteobrama cotio cotio), puti (Barbodes sarana), tit puti (Puntius ticto), tengra (Mystus vitatus), chapila ( Gudusia chapra), batashi (Pseudotropius atherinoides), buzuri tengra (Mystus tengra), katchki (Corika soborna), gol chanda (Chanda ranga), lamba chanda (Chanda nama), phul chela (Chela phulo) and lata (Channa punctatus) are the most common. But the abundance of the mola, puti, tengra, batashi and chapila are higher than the other SIS species. Puti was at the top of the list in percentage abundance (7-9%), followed by mola (7-8%), tengra 6-7% and chapila 5-6% in all the investigated areas. Three levels of market or marketing systems were observed in the distribution channel of fish trade: primary, secondary/higher secondary and final consuming markets. Primary market is the catching point in the rural area. In secondary market, the collectors bring the fish from primary market to the landing ghats, usually to the nearest thana market or at a place well linked by rivers, road and rail transport. On purchasing the fish from the higher secondary market, the paikars sell the fish to the retailers who take it to the final consumer market. Different types of crafts and gears are used for catching the SIS in Bangladesh. Monofilament gill nets (20%), traps and line nets (25%) and seine nets (25%) are the dominant gears in respect of the total catch followed by lift net (10%) and cast net (20%). A total of 10 types of gear are listed according to their mode of operation which used for catching SIS. The processors in consumer market received higher marketing profit followed by primary market and secondary market, respectively.

Studies on thermal deffusivity [i.e. diffusivity] and conductivity of fresh and dry fish

Thermal diffusivity (α) and conductivity (K) of fresh and dry cured fish at different moisture levels were investigated by a calorimeter (regular regime) method and transient line source technique. Thermal conductivity has a linear correlation with packing density and percentage water content. K values calculated from formula method and line source technique are comparable.

Study on the genus Euops Schoenherr (Coleoptera : Attelabidae) from China, with descriptions of a new subgenus and six new species

The present paper deals with 19 species in four subgenera of the attelabid genus Euops from China (including Taiwan), of which six species and a subgenus are new to science. The subgenus Synaptops is newly divided into three species-groups. A key to species, with photographs and line illustrations of important features of new species is provided.

On the fishes and fisheries of Lake Baringo

Six fish species are known to occur in Lake Baringo. Tilapia nilotica Linnaeus 1757, Barbus gregorii Boulenger 1902, Clarias mossambicus Peters 1852 and Labeo cylindricus Peters 1852 were recorded in 1930-31. In 1969, two more fish species were identified: Aplocheilichthys sp. and Barbus lineomaculatus Boulenger 1903. T. nilotica is the only fish species commercially exploited. But the catches, catch per unit effort and the mean size of fish caught in commercial gillnets have declined since 1968. B. gregorii is important in the subsistence rod-and-line fishery. L. cylindricus, C. mossambicus, B. lineomaculatus and Aplochelichthys sp. are not commercially exploited.

Red-Green-Blue 2D tuneable liquid crystal laser devices

In this paper, we review our recent experimental work on coherent and blue phase liquid crystal lasers.We will present results on thin-film photonic band edge lasing devices using dye-doped low molar mass liquid crystals in self-organised chiral nematic and blue phases. We show that high Q-factor lasers can be achieved in these materials and demonstrate that a single mode output with a very narrow line width can be readily achievable in well-aligned mono-domain samples. Further, we have found that the performance of the laser, i.e. the slope efficiency and the excitation threshold, are dependent upon the physical parameters of the low molar mass chiral nematic liquid crystals. Specifically, slope efficiencies greater than 60% could be achieved depending upon the materials used and the device geometry employed. We will discuss the important parameters of the liquid crystal host/dye guest materials and device configuration that are needed to achieve such high slope efficiencies. Further we demonstrate how the wavelength of the laser can be tuned using an in-plane electric field in a direction perpendicular to the helix axis via a flexoelectric mechanism as well as thermally using thermochromic effects. We will then briefly outline data on room temperature blue phase lasers and further show how liquid crystal/lenslet arrays have been used to demonstrate 2D laser emission of any desired wavelength. Finally, we present preliminary data on LED/incoherent pumping of RG liquid crystal lasers leading to a continuous wave output. © 2009 SPIE.

Heat source modelling and natural ventilation efficiency

We compare natural ventilation flows established by a range of heat source distributions at floor level. Both evenly distributed and highly localised line and point source distributions are considered. We demonstrate that modelling the ventilation flow driven by a uniformly distributed heat source is equivalent to the flow driven by a large number of localised sources. A model is developed for the transient flow development in a room with a uniform heat distribution and is compared with existing models for localised buoyancy inputs. For large vent areas the flow driven by localised heat sources reaches a steady state more rapidly than the uniformly distributed case. For small vent areas there is little difference in the transient development times. Our transient model is then extended to consider the time taken to flush a neutrally buoyant pollutant from a naturally ventilated room. Again comparisons are drawn between uniform and localised (point and line) heat source geometries. It is demonstrated that for large vent areas a uniform heat distribution provides the fastest flushing. However, for smaller vent areas, localised heat sources produce the fastest flushing. These results are used to suggest a definition for the term 'natural ventilation efficiency', and a model is developed to estimate this efficiency as a function of the room and heat source geometries. © 2006 Elsevier Ltd. All rights reserved.

Abundance and conservation status of the Yangtze finless porpoise in the Yangtze River, China

middle and lower reaches of the Yangtze River, China. It is the only freshwater population of porpoises in the world and is currently listed as Endangered by IUCN. In November and December 2006 we used two boats and line transect methods to survey the entire current range of the population, except for two lakes (Poyang and Dongting). Sighting results were similar for both boats, so we pooled all data and analyzed them using two line transect models and a strip transect model. All models produced similar estimates of abundance (1111, 1225 and 1000). We then added independent estimates of the number of porpoises from the two lakes for a total estimate of approximately 1800 porpoises. Our findings indicate that the population continues to decline and that its distribution is becoming more fragmented. Our current estimate in the main river is slightly less than half the estimate from surveys between 1984 and 1991 (which was probably an underestimate). We also found an apparent gap in the distribution of porpoises between Yueyang and Shishou (similar to 150 km), where sightings had previously been common. Continued threats to Yangtze finless porpoises include bycatch in unregulated and unselective fishing, habitat degradation through dredging, pollution and noise, vessel strikes and water development. Immediate protective measures are urgently needed to ensure the persistence of finless porpoises in the Yangtze River. The survey design and analytical methods developed in this study might be appropriate for surveys of cetaceans in other river systems. (c) 2008 Elsevier Ltd. All rights reserved.

Two-electron-one-photon M1 and E2 transitions between the states of the 2p(3) and 2s(2)2p odd configurations for B-like ions with 18 <= Z <= 92

Two-electron-one-photon (TEOP) M1 and E2 transition energies, line strengths and transition probabilities between the states of the 2p(3) and 2s(2)2p odd configurations for B-like ions with 18 <= Z <= 92 have been calculated using the GRASP2K package based on the multiconfiguration Dirac-Hartree-Fock (MCDHF) method. Employing active-space techniques to expand the configuration list, we have systematically considered the valence, core-valence and core-core electron correlation effects. Breit interaction and quantum electrodynamical (QED) effects were also included to correct atomic state wavefunctions and the corresponding energies. Influences of electron correlation, Breit interaction and QED effects on transition energies and line strengths of the TEOP M1 and E2 transitions were analysed in detail. The present results were also compared with other theoretical and experimental values.