Bromeliad-living spiders improve host plant nutrition and growth

Although bromeliads are believed to obtain nutrients from debris deposited by animals in their rosettes, there is little evidence to support this assumption. Using stable isotope methods, we found that the Neotropical jumping spider Psecas chapoda (Salticidae), which lives strictly associated with the terrestrial bromeliad Bromelia balansae, contributed 18% of the total nitrogen of its host plant in a greenhouse experiment. In a one-year field experiment, plants with spiders produced leaves 15% longer than plants from which the spiders were excluded. This is the first study to show nutrient provisioning in a spider-plant system. Because several animal species live strictly associated with bromeliad rosettes, this type of facultative mutualism involving the Bromeliaceac may be more common than previously thought.

Condutividade hidráulica e resistência à penetraçao do solo influenciada por diferentes sistemas de manejo

Soil management measures that increase the efficiency of organic matter cycling and maintain favorable soil structure are needed for improving soil quality. On the other hand, soil structure degradation due to inadequate soil management systems is widespread. Among the indicators of soil physical quality, saturated hydraulic conductivity and penetration resistance are thought to be sensitive to soil management system. The aim of this work was to study the influence of soil tillage system and organic fertilization on selected soil physical properties after the first year of treatment. The field work was conducted in Selviria, MS, Brazil on an Oxisol. The experimental design was randomized complete blocks with split-plots, with 12 treatments and 4 repetitions. Tillage treatments included conventional ploughing (CT) and direct drilling (DD). Fertilizer treatments were: 1) manure, 2) manure plus mineral, 3) traditional mineral 4) plant residues of Crotalaria juncea, 5) plant residues of Pennisetum americanum and 6) control plot. The plots were cropped to bean in winter and to cotton in summer, and both cultures were irrigated. After one year no significant differences between treatments in mechanical resistance and porosity were found. However, saturated hydraulic conductivity and infiltration were higher in the conventional tillage treatment at the 0.00-0.10 m depth. Moreover, an improvement in soil physical condition by organic fertilizers was shown.

Developing a system for down-hole seismic testing together with the CPTU

This paper presents a system for performing down-hole seismic test together with the piezocone test in order to determine the shear wave velocity (Vs) and for calculating the maximum shear modulus (Go); a basic parameter for analyzing the dynamic soil behavior and a reference value of the soil stiffness. The system components are described and tests results for checking the geophone response are also presented, both before and after installation into the probe. The system was used in down-hole tests carried out at three experimental research sites located in the interior of Sao Paulo State, Brazil, where in situ seismic test results are available. The Vs values measured in down-hole tests carried out with this system were consistent with those determined in cross-hole tests and with a commercial seismic piezocone, which enabled to validate the developed system.

Produção do arroz em função da adubação com silício e nitrogênio no sistema de sequeiro e irrigado por aspersão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adubação de pré-semeadura na cultura do milho em diferentes manejo do solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Perdas na colheita e qualidade da fibra de cultivares de algodão adensado em função de sistemas de colheita

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Distribuição do sistema radicular da aceroleira (Malpighia spp), uniformidade da irrigação e dinâmica de nutrientes do solo na região da Nova Alta Paulista

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Variabilidade espacial de atributos do solo e da cultura do milho (Zea mays L.) em dois sistemas de manejo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Coberturas vegetais, manejo do solo e doses de nitrogênio em cobertura na cultura do milho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Disponibilidade de n e k no solo e sua absorção pela videira de vinho fertirrigada no semiárido

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Emissão de gases de efeito estufa e estoque de carbono no solo em função do manejo e correção de acidez

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nitrogen fertilizer (15N) leaching in a central pivot fertigated coffee crop

Nitrogen has a complex dynamics in the soil-plant-atmosphere system. N fertilizers are subject to chemical and microbial transformations in soils that can result in significant losses. Considering the cost of fertilizers, the adoption of good management practices like fertigation could improve the N use efficiency by crops. Water balances (WB) were applied to evaluate fertilizer N leaching using 15N labeled urea in west Bahia, Brazil. Three scenarios (2008/2009) were established: i) rainfall + irrigation the full year, ii) rainfall only; and iii) rainfall + irrigation only in the dry season. The water excess was considered equal to the deep drainage for the very flat area (runoff = 0) with a water table located several meters below soil surface (capillary rise = 0). The control volume for water balance calculations was the 0 - 1 m soil layer, considering that it involves the active root system. The water drained below 1 m was used to estimate fertilizer N leaching losses. WB calculations used the mathematic model of Penman-Monteith for evapotranspiration, considering the crop coefficient equal to unity. The high N application rate associated to the high rainfall plus irrigation was found to be the main cause for leaching, which values were 14.7 and 104.5 kg ha-1 for the rates 400 and 800 kg ha-1 of N, corresponding to 3.7 and 13.1 % of the applied fertilizer, respectively.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Stable isotope fractionation of selenium by biomethylation in soil

Selen ist in geringen Mengen ein essentielles Nährelement, das aber in höheren Gehalten toxisch wird. Der Se-Kreislauf in der Umwelt ist eng mit Redoxreaktionen wie der Reduktion von Se-Oxyanionen zu Methylselenid verknüpft. Flüchtige Methylselenide sind weit verbreitet und stellen einen wichtigen Se-Fluss in der Umwelt dar. Das übergeordnete Ziel meiner Dissertation war, die Stabilisotopenfraktionierung von Se durch Biomethylierung verschiedener oxidierter Se-Spezies (Se[IV] und Se[VI]) im Boden aufzuklären. Zunächst wurde eine Methode entwickelt, die es erlaubte flüchte Methylselenide quantitativ zurückzuhalten. Es zeigte sich, dass alkalische Peroxid-Lösung dafür geeignet war. Mit alkalischer Peroxid-Lösung wurde eine Wiederfindung von 95,6 ± Standardabweichung 5,4% in Verflüchtigungsexperimenten mit Methylselenid-Standards erreicht. Bei Einsatz von alkalischer Peroxid-Lösung in geschlossenen Mikrokosmos-Experimenten kam es zu keinen Se-Verlusten und ausgeglichenen Se-Isotopenbilanzen. Die massengewichteten δ82/76Se-Werte lagen für Se(IV) und Se(VI) am Ende der Mikrokosmos-Inkubationen bei -0,31 ± 0,05‰ (n = 3) und -0,76 ± 0,07‰ (n = 3) verglichen mit -0,20 ± 0,05‰ und -0,69 ± 0,07‰ im jeweils zugegebenen Se. Im zweiten Teil meiner Dissertation wurde die Pilzart Alternaria alternata mit Se(VI) und Se(IV) in geschlossenen Mikrokosmen für 11-15 und Se(IV) zusätzlich für 3-5 Tage bei 30°C inkubiert. In 11-15 Tagen wurden 2,9-11% des Se(VI) und 21-29% des Se(IV) und in 3-5 Tagen, 3-5% des Se(IV) methyliert. Die anfänglichen δ82/76Se-Werte von Se(VI) und Se(IV) lagen bei -0,69 ± 0,07‰, und -0,20 ± 0,05‰. Die δ82/76Se-Werte der Methylselenide unterschieden sich nach 11-15 Tagen Inkubation signifikant zwischen Se(VI) (-3,97 bis -3,25 ‰) und Se(IV) (-1,44 bis -0,16‰) als Quellen. Die δ82/76Se-Werte der Methylselenide zeigen also die Quellen der Biomethylierung von Se an. Die kürzere Inkubation von Se(IV) für 3-5 Tage führte zu einer ausgeprägten Se-Isotopenfraktonierung von mindestens -6‰, bevor ein Fließgleichgewicht erreicht wurde. Im dritten Teil bestimmte ich die Bindungsformen von Se mit drei operativ definierten sequentiellen Extraktionen und die δ82/76S-Werte des gesamten Selens in zehn urbanen Oberböden mit 0,09-0,52 mg/kg Se, die fünf verschiedene Landnutzungstypen repräsentierten (Überschwemmungsgrünland, Garten, Park, Straßenrand und Wald). Nur ein kleiner Teil des Seleniums lag in austauschbarer und damit direkt bioverfügbarer und in residualer, wenig reaktiver Form vor. Das meiste Se war an die organische Substanz und Fe-(Hydr-)Oxide gebunden (42-77% des gesamten Selens). Der mittlere δ82/76Se-Wert des gesamten Selens in den Oberböden lag mit -0,03 ± 0,38‰ nahe beim Mittelwert der gesamten Erde. Geringfügig niedrigere Se-Isotopensignale von -0,59 bis -0,35‰ v.a. in Waldböden und geringfügig höhere von 0,26 to 0,45‰ in Überschwemmungsgrünland wurden vermutlich durch Boden-Pflanze-Recycling und Se-Kontaminationen durch das Flusswasser verursacht. Der vierte Teil umfasste ein “Natural Attenuation”-Experiment und Mikrokosmos-Inkubationen von Bodenproben mit A. alternata. Die Equilibrierung von zum Boden gegebenem Se(IV) und Se(VI) für drei Tage führte zu abnehmenden wasserlöslichen Se-Gehalten um 32-44% bzw. 8-14, die mit kleinen Isotopenfraktionierung (ε = -0,045 bis -0,12 ‰ and -0,05 to -0,07‰ verbunden waren. In zwei der inkubierten Böden mit mäßig sauren pH-Werten wurden zwischen 9,1 und 30% des zugefügten Se(IV) und 1,7% des zugefügten Se(VI) methyliert während in einem stark sauren Boden keine Methylierung auftrat. Das aus Se(IV) entstandene Methylselenid war deutlich gegenüber dem zugegebenen Se-Standard (0,20‰) an 82Se verarmt (δ82/76Se = -3,3 bis -4,5‰). Meine Ergebnisse zeigen, dass die stabilen Isotopenverhältnisse von Se neue Einblicke in Se-Transformationsprozesse erlauben.rn

Physical land degradation and loss of soil fertility: soil structural stability and bio-physical indicators

This study investigates the changes in soil fertility due to the different aggregate breakdown mechanisms and it analyses their relationships in different soil-plant systems, using physical aggregates behavior and organic matter (OM) changes as indicators. Three case studies were investigated: i) an organic agricultural soil, where a combined method, aimed to couple aggregate stability to nutrients loss, were tested; ii) a soil biosequence, where OM chemical characterisation and fractionation of aggregates on the basis of their physical behaviour were coupled and iii) a soils sequence in different phytoclimatic conditions, where isotopic C signature of separated aggregates was analysed. In agricultural soils the proposed combined method allows to identify that the severity of aggregate breakdown affected the quantity of nutrients lost more than nutrients availability, and that P, K and Mg were the most susceptible elements to water abrasion, while C and N were mainly susceptible to wetting. In the studied Chestnut-Douglas fir biosequence, OM chemical properties affected the relative importance of OM direct and indirect mechanisms (i.e., organic and organic-metallic cements, respectively) involved in aggregate stability and nutrient losses: under Douglas fir, high presence of carboxylate groups enhanced OM-metal interactions and stabilised aggregates; whereas under Chestnut, OM directly acted and fresh, more C-rich OM was preserved. OM direct mechanism seemed to be more efficient in C preservation in aggregates. The 13C natural abundance approach showed that, according to phytoclimatic conditions, stable macroaggregates can form both around partially decomposed OM and by organic-mineral interactions. In topsoils, aggregate resistance enhanced 13C-rich OM preservation, but in subsoils C preservation was due to other mechanisms, likely OM-mineral interactions. The proposed combined approach seems to be useful in the understanding of C and nutrients fate relates to water stresses, and in future research it could provide new insights into the complexity of soil biophysical processes.