Model of single-electron decay from a strongly isolated quantum dot

Recent measurements of electron escape from a nonequilibrium charged quantum dot are interpreted within a two-dimensional (2D) separable model. The confining potential is derived from 3D self-consistent Poisson-Thomas-Fermi calculations. It is found that the sequence of decay lifetimes provides a sensitive test of the confining potential and its dependence on electron occupation

Pauli distorted double folded potential

The enhancement in the production of even-Z nuclei observed in nuclear fission has also been observed in fragments produced from heavy ion collsions. Beams of 40Ar, 40Cl, and 40Ca at 25 MeV/nucleon were impinged on 58Fe and 58Ni targets. The resulting fragments were detected using the MSU 4pi detector array, which had additional silicon detectors for better isotopic resolution. Comparison of the ratios of yields for each element showed enhancement of even-Z fragment production. The enhancement was more pronounced for reactions with a greater difference in the N/Z of the compound system. However, this effect was less for systems that were more neutron rich. The average N/Z for fragments also displayed an odd-even effect with a lower average N/Z for the even-Z fragments. This is related to the greater availability of neutron-poor isotopes for even-Z nuclei

Correlations in hot asymmetric nuclear matter

Bulk and single-particle properties of hot hyperonic matter are studied within the Brueckner-Hartree-Fock approximation extended to finite temperature. The bare interaction in the nucleon sector is the Argonne V18 potential supplemented with an effective three-body force to reproduce the saturating properties of nuclear matter. The modern Nijmegen NSC97e potential is employed for the hyperon-nucleon and hyperon-hyperon interactions. The effect of temperature on the in-medium effective interaction is found to be, in general, very small and the single-particle potentials differ by at most 25% for temperatures in the range from 0 to 60 MeV. The bulk properties of infinite matter of baryons, either nuclear isospin symmetric or a Beta-stable composition that includes a nonzero fraction of hyperons, are obtained. It is found that the presence of hyperons can modify the thermodynamical properties of the system in a non-negligible way.

Distribution of single-particle strength due to short-range and tensor correlations

The distribution of single-particle strength in nuclear matter is calculated for a realistic nucleon-nucleon interaction. The influence of the short-range repulsion and the tensor component of the nuclear force on the spectral functions is to move approximately 13% of the total strength for all single-particle states beyond 100 MeV into the particle domain. This result is related to the abundantly observed quenching phenomena in nuclei which include the reduction of spectroscopic factors observed in (e,ep) reactions and the missing strength in low energy response functions.

Deuteron properties using a truncated one-piox exchange potential

Deuteron properties are studied using the one-pion exchange potential truncated at a radius R, with a constant interior potential. The spectrum of bound states and their properties are put in evidence. We discuss the relation of this model to more realistic models of the nucleon-nucleon interaction.

Toward synthetic combinatorial peptide libraries in positional scanning format (PS-SCL)-based identification of CD8+ Tumor-reactive T-Cell Ligands: a comparative analysis of PS-SCL recognition by a single tumor-reactive CD8+ cytolytic T-lymphocyte clone.

The use of synthetic combinatorial peptide libraries in positional scanning format (PS-SCL) has emerged recently as an alternative approach for the identification of peptides recognized by T lymphocytes. The choice of both the PS-SCL used for screening experiments and the method used for data analysis are crucial for implementing this approach. With this aim, we tested the recognition of different PS-SCL by a tyrosinase 368-376-specific CTL clone and analyzed the data obtained with a recently developed biometric data analysis based on a model of independent and additive contribution of individual amino acids to peptide antigen recognition. Mixtures defined with amino acids present at the corresponding positions in the native sequence were among the most active for all of the libraries. Somewhat surprisingly, a higher number of native amino acids were identifiable by using amidated COOH-terminal rather than free COOH-terminal PS-SCL. Also, our data clearly indicate that when using PS-SCL longer than optimal, frame shifts occur frequently and should be taken into account. Biometric analysis of the data obtained with the amidated COOH-terminal nonapeptide library allowed the identification of the native ligand as the sequence with the highest score in a public human protein database. However, the adequacy of the PS-SCL data for the identification for the peptide ligand varied depending on the PS-SCL used. Altogether these results provide insight into the potential of PS-SCL for the identification of CTL-defined tumor-derived antigenic sequences and may significantly implement our ability to interpret the results of these analyses.

Metastable liquid-liquid phase transition in a single-component system with only one crystal phase and no density anomaly

We investigate the phase behavior of a single-component system in three dimensions with spherically-symmetric, pairwise-additive, soft-core interactions with an attractive well at a long distance, a repulsive soft-core shoulder at an intermediate distance, and a hard-core repulsion at a short distance, similar to potentials used to describe liquid systems such as colloids, protein solutions, or liquid metals. We showed [Nature (London) 409, 692 (2001)] that, even with no evidence of the density anomaly, the phase diagram has two first-order fluid-fluid phase transitions, one ending in a gas¿low-density-liquid (LDL) critical point, and the other in a gas¿high-density-liquid (HDL) critical point, with a LDL-HDL phase transition at low temperatures. Here we use integral equation calculations to explore the three-parameter space of the soft-core potential and perform molecular dynamics simulations in the interesting region of parameters. For the equilibrium phase diagram, we analyze the structure of the crystal phase and find that, within the considered range of densities, the structure is independent of the density. Then, we analyze in detail the fluid metastable phases and, by explicit thermodynamic calculation in the supercooled phase, we show the absence of the density anomaly. We suggest that this absence is related to the presence of only one stable crystal structure.

Potential hosts number in cuckoo bees (Psithyrus subgen.) increases toward higher elevations

In severe and variable conditions, specialized resource selection strategies should be less fre‐ quent because extinction risks increase for species that depend on a single and unstable resource. Psithyrus (Bombus subgenus Psithyrus) are bumblebee parasites that usurp Bombus nests and display inter‐specific variation in the number of hosts they parasitize. Using a phylogenetic comparative frame‐ work, we show that Psithyrus species at higher elevations display a higher number of hosts species com‐ pared with species restricted to lower elevations. Species inhabiting high elevations also cover a larger temperature range, suggesting that species able to occur in colder conditions may benefit from recruit‐ ment from populations occurring in warmer conditions. Our results provide evidence for an 'altitudinal niche breadth hypothesis' in parasitic species, showing a decrease in the parasites' specialization along the elevational gradient, and also suggesting that Rapoport's rule might apply to Psithyrus.

Identification and potential origin of invasive clawed frogs Xenopus (Anura: Pipidae) in Sicily based on mitochondrial and nuclear DNA

African clawed frogs of the widespread polytypic species Xenopus laevis Daudin, 1802 (ranging large parts of sub-Saharan Africa) have been spreading since the 1940s, and have established reproductive populations in Europe, Asia and the Americas, where they can have negative impact as competitors of native amphibians and as disease vectors for chytridomycosis or ranaviruses. Here we use two mitochondrial (cytochrome b, 16S rDNA) and one nuclear (RAG 1: Recombination Associated Gene 1) DNA markers to infer the potential origin of invasive clawed frogs from Sicily that represent the largest invasive population in Europe. Identical mtDNA haplotypes match with those of Xenopus laevis, and Sicilian clawed frogs very probably belong to a lineage from the Cape Region of South Africa, most likely originating from a laboratory stock. Nuclear data support this conclusion. Identical mtDNA sequences (cyt b, 16S) of frogs sampled across their range in Sicily suggest the occurrence of a single source population and a potential bottleneck at their release, but faster evolving multilocus nuclear data (microsatellites, SNPs) on the population genetics would be important in the future to better support this hypothesis

Choosing among techniques for quantifying single-case intervention effectiveness

If single case experimental designs are to be used to establish guidelines for evidence-based interventions in clinical and educational settings, numerical values that reflect treatment effect sizes are required. The present study compares four recently developed procedures for quantifying the magnitude of intervention effect using data with known characteristics. Monte Carlo methods were used to generate AB designs data with potential confounding variables (serial dependence, linear and curvilinear trend, and heteroscedasticity between phases) and two types of treatment effect (level and slope change). The results suggest that data features are important for choosing the appropriate procedure and, thus, inspecting the graphed data visually is a necessary initial stage. In the presence of serial dependence or a change in data variability, the Nonoverlap of All Pairs (NAP) and the Slope and Level Change (SLC) were the only techniques of the four examined that performed adequately. Introducing a data correction step in NAP renders it unaffected by linear trend, as is also the case for the Percentage of Nonoverlapping Corrected Data and SLC. The performance of these techniques indicates that professionals" judgments concerning treatment effectiveness can be readily complemented by both visual and statistical analyses. A flowchart to guide selection of techniques according to the data characteristics identified by visual inspection is provided.

A two-phase composite in simple shear: Effective mechanical anisotropy development and localization potential

We present a combined shape and mechanical anisotropy evolution model for a two-phase inclusion-bearing rock subject to large deformation. A single elliptical inclusion embedded in a homogeneous but anisotropic matrix is used to represent a simplified shape evolution enforced on all inclusions. The mechanical anisotropy develops due to the alignment of elongated inclusions. The effective anisotropy is quantified using the differential effective medium (DEM) approach. The model can be run for any deformation path and an arbitrary viscosity ratio between the inclusion and host phase. We focus on the case of simple shear and weak inclusions. The shape evolution of the representative inclusion is largely insensitive to the anisotropy development and to parameter variations in the studied range. An initial hardening stage is observed up to a shear strain of gamma = 1 irrespective of the inclusion fraction. The hardening is followed by a softening stage related to the developing anisotropy and its progressive rotation toward the shear direction. The traction needed to maintain a constant shear rate exhibits a fivefold drop at gamma = 5 in the limiting case of an inviscid inclusion. Numerical simulations show that our analytical model provides a good approximation to the actual evolution of a two-phase inclusion-host composite. However, the inclusions develop complex sigmoidal shapes resulting in the formation of an S-C fabric. We attribute the observed drop in the effective normal viscosity to this structural development. We study the localization potential in a rock column bearing varying fraction of inclusions. In the inviscid inclusion case, a strain jump from gamma = 3 to gamma = 100 is observed for a change of the inclusion fraction from 20% to 33%.

Single cell analysis reveals similar functional competence of dominant and non-dominant CD8 T-cell clonotypes

The properties of CD8 T-cells requiredfor protection from infectiousdisease and cancer are only partiallycharacterized, and only limited data isavailable regarding T-cell clonotypes.It has been proposed that dominantT-cell clonotypes may have higherprotective potential than their nondominantcounterparts. Our objectiveswere to assess memory andeffector functions, stage of differentiationand clonotype selection of tumor-reactive T lymphocytes followingpeptide vaccination in melanomapatients.We also characterized dominantversus non-dominant clonotypesto further understand the in vivo functionof these T-cells based on theirprevalence. Using a novel single-cellapproach for simultaneous ex vivomolecular and functional analysis, wereport the preferential selection andexpansion of several tumor-specificco-dominant clonotypes of intermediateto high frequencies, irrespectiveof whether native or analog peptidewas used for vaccination. Theseclonotypes made up 40 - 95% of thedifferentiated "effector-like" T-cells,but only 25% of the less-differentiated"effector-memory" cells. Bothsubsets also contained non-dominantT-cell clonotypes, but these were significantlymore frequent in the lessdifferentiatedcells. Thus, cell differentiationwas clonotype-dependent.Surprisingly however, the acquisitionof memory and effector T-cell propertieswas clonotype independent, as wefound similar functional profiles indominant and low/ non-dominantT-cell clonotypes. In contrast to analogpeptide vaccination, native peptidevaccination induced T-cell functionsthat were more comprehensive,with more pronounced effector functionscombined with memory cellproperties. In summary, this study revealsthat T-cell functions are determinedprimarily by the antigen andthe stage of T-cell differentiation, butare similar in dominant and non-dominantclonotypes participating in aCD8 T-cell response. The identifiedclonotypic basis of T-cell responsescontributes to the rational developmentof vaccines.

A single dose of intravenous esomeprazole decreases gastric secretion in healthy volunteers.

BACKGROUND: Data suggest that esomeprazole decreases gastric secretion. AIMS: To assess the effect of a single i.v. esomeprazole dose on gastric secretion volume 3 h after drug administration, as a primary endpoint, and to evaluate, as secondary endpoints, the reduction 1 and 5 h after dosing; time when the gastric pH was <2.5 and esomeprazole's safety. METHODS: In all, 23 healthy Helicobacter pylori-negative volunteers (10 men, 13 women, mean age 28.2 +/- 6) participated in this single-centre, randomized, double-blind, placebo-controlled, 2-way, single-dose cross-over study. In different sessions, volunteers received i.v. either esomeprazole 40 mg or placebo. An inserted double-lumen nasogastric tube perfused and aspirated gastric liquid. Mechanical fractioned aspiration measured secretion volume; aliquot spectrophotometry assessed gastric secretion volume lost to the duodenum. RESULTS: Three hours post-i.v. esomeprazole, average gastric secretion decreased by 77.6% (vs. baseline) compared to placebo. Values 1 and 5 h after dosing were 73.5% and 74.5%. Five hours after esomeprazole, the gastric pH was <2.5 3.9% of the time and 73.3% after placebo (P < 0.002). Esomeprazole was well-tolerated. No serious adverse events occurred. CONCLUSIONS: Intravenous esomeprazole decreases gastric secretions. The potential clinical impact in averting bronchoaspiration during anaesthesia induction and in intensive care patients should be investigated in further studies.

Magnetism of isolated Mn12 single-molecule magnets detected by magnetic circular dichroism: Observation of spin tunneling with a magneto-optical technique

We report magnetic and magneto-optical measurements of two Mn12 single-molecule magnet derivatives isolated in organic glasses. Field-dependent magnetic circular dichroism (MCD) intensity curves (hysteresis cycles) are found to be essentially identical to superconducting quantum interference device magnetization results and provide experimental evidence for the potential of the optical technique for magnetic characterization. Optical observation of magnetic tunneling has been achieved by studying the decay of the MCD signal at weak applied magnetic field

Standards for Single Span Prefabricated Bridges, Phase I - Concept Development, TR-663, 2014

In coordination with a Technical Advisory Committee (TAC) consisting of County Engineers and Iowa DOT representatives, the Iowa DOT has proposed to develop a set of standards for a single span prefabricated bridge system for use on the local road system. The purpose of the bridge system is to improve bridge construction, accelerate project delivery, improve worker safety, be cost effective, reduce impacts to the travelling public by reducing traffic disruptions and the duration of detours, and allow local forces to construct the bridges. HDR Inc. was selected by the Iowa DOT to perform the initial concept screening of the bridge system. This Final Report summarizes the initial conceptual effort to investigate potential systems, make recommendations for a preferred system and propose initial details to be tested in the laboratory in Phase 2 of the project. The prefabricated bridge components were to be based on the following preliminary criteria set forth by the TAC. The criteria were to be verified and/ or modified as part of the conceptual development. - 24’ and 30’ roadway widths - Skews of 0o, 15o, and 30o - Span lengths of 30’ – 70’ in 10’ increments using precast concrete beams - Voided box beams could be considered - Limit precast element weight to 45,000 pounds for movement and placement of beams - Beams could be joined transversely with threaded rods - Abutment concepts may included precast as well as an option for cast-in-place abutments with pile foundations In addition to the above criteria, there was an interest to use a single-width prefabricated bridge component to simplify fabrication as well as a desire to utilize non-prestressed concrete systems where possible to allow for precasting of the beam modules by local forces or local precast plants. The SL-1 modular steel bridge rail was identified for use with this single span prefabricated bridge system.