Comparative cytogenetics in different populations of the cavernicolous diplopod Pseudonannolene strinatii (Diplopoda, Pseudonannolenidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Manutenção da qualidade e aumento da longevidade floral de crisântemo cv. White polaris

0 objetivo do trabalho foi determinar o melhor tratamento pós-colheita para manutenção floral e aumento da longevidade de crisântemo de maço do tipo pompom (Dendranthema grandiflorum (Ramat.) S. Kitamura) cv. White Polaris. Estabeleceu-se como ponto de colheita o momento em que as hastes apresentavam três inflorescências apicais com as pétalas externas em ângulo de 45° em relação à horizontal. Durante o ensaio em laboratório, as hastes, colhidas em estufa de produção comercial, após totalmente imersas em água de torneira, à sombra, durante três horas, foram cortadas sob água na base do caule entre 50 e 60 cm. As hastes foram distribuídas nos diferentes tratamentos de pulsing durante 24 horas, com luz contínua de 1.500 lux, 60 a 90% de umidade relativa do ar e temperatura ambiente de 25 ± 2°C. No primeiro experimento, testou-se a eficiência de 8-hidroxiquinolina (8-HQ) e tiabendazole (TBZ) como germicidas de manutenção da qualidade na solução de pulsing; testaram-se, também, dois reguladores de crescimento, a saber: ácido giberélico (GA3), 6-benzilaminopurina (6-BA) ou a mistura dos dois, com o objetivo de preservar a cor e a turgidez da folhagem. Os melhores resultados foram com 8-HQ (0,69 mol/m³) e GA3 (0,058 mo1/m³). No segundo experimento, avaliaram-se os seguintes inibidores de etileno: tiossulfato de prata (STS), nitrato de prata (AgNO3) e cloreto de cobalto (COC1(2)). A melhor resposta foi obtida com AgNO3 (2,9 e 4,4 mo1/m³).

Soluções conservantes em sorvetão pós-colheita

O objetivo deste trabalho foi estudar alguns aspectos da fisiologia pós-colheita de inflorescências de sorvetão cultivadas no Submédio São Francisco. Hastes florais recém-colhidas foram submetidas a diferentes tratamentos (água destilada; 75mg L-1 de nitrato de prata - AgNO3; 1000mg L-1 de cloreto de cobalto - CoCl2; 5mg L-1 de ácido giberélico - GA3 - Progibb® e 10mg L-1 de 6-Benzilaminopurina - BAP), em ambiente com temperatura e umidade controlada por 15 dias. A vida pós-colheita foi acompanhada a partir da escala de notas, da massa da matéria fresca e do consumo da solução conservante. O tratamento com AgNO3 em hastes de sorvetão, foi o mais eficiente na manutenção da vida de vaso de sorvetão, porém, devido a sua toxidez, recomenda-se o uso de GA3.

Karyotype characterization, constitutive heterochromatin and nucleolus organizer regions of Paranaita opima (Coleoptera, Chrysomelidae, Alticinae)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Astylus variegatus (Coleoptera, Melyridae): Cytogenetic study of a population exposed to agrochemical products

In this work we describe the cytogenetic analyses performed in specimens of Astylus variegatus (Germar, 1824) collected in two localities: one area of natural vegetation and one of agricultural crops, where agrochemical products were used. Astylus variegatus had karyotypes with 2n(male) = 16+Xy p and 2n (female) = 16+XXp, with exclusively metacentric chromosomes. Pachytene spermatocytes showed synapsed autosomal bivalents and non-associated sex chromosomes. In diplotene, the autosomal bivalents exhibited one or two terminal chiasmata and the Xy p had a typical parachute configuration. In meiotic cells of some specimens, an extra chromosome, interpreted as a B chromosome, was observed. C-banding showed constitutive heterochromatin in the pericentromeric region of all chromosomes, with the exception of the y p. Silver nitrate staining revealed one nucleolus organizer region (NOR) on the terminal region of the short arm of the second autosome pair. Silver staining of meiotic cells confirmed the NOR pattern detected in mitotic cells and revealed an argentophilous material on the Xy p. A cytogenetic comparison between the two populations of A. variegatus showed a statistically significant divergence (chi2 = 117.10; df = 1) in the number of aneuploid cells and a higher frequency of B chromosome in the population exposed to agrochemicals.

Effect of the composite surface sealant application moment on marginal sealing of compactable composite resin restoration

An analysis was carried out to observe whether the application or not of a composite surface sealant (CSS), as well the moment for CSS application were able to reduce marginal microleakage in compactable composite resin restoration. All the preparations were restored with a compactable composite resin. The restored teeth were randomly assessed. G1 (control group): finished and polished; G2: finished, polished, etched and cover with CSS; G3: immediately after the restoration done the CSS was applied, then finished and polished; G4: CSS applied immediately after the restoration was done, the finished and polished, etched, and covered with CSS. The specimens were isolated with nail polish, thermocycled, immersed in aqueous solution of silver nitrate, and followed in a photo developing solution. The microleakage scores obtained from the occlusal and cervical walls were analyzed with the Kruskall-Wallis nonparametric test. No microleakage was found at the enamel margins. Comparing the microleakage scores at dentin/cementum margins (p < 0.05) it was found that G3 (p = 0.0162) and G4 (p = 0.0187) were able to reduce microleakage when compared with group G2. However the results were not statistically different from the control group. The application of CSS was not able to completely eliminate marginal microleakage at the dentin/cementum margins.

A natural triploid in Trichomycterus davisi (Siluriformes, Trichomycteridae): mitotic and meiotic characterization by chromosome banding and synaptonemal complex analyses

Within a total of 50 analyzed specimens a male individual of Trichomycterus davisi has been recorded with 81 chromosomes including 60 metacentric, 18 submetacentric and three subtelocentric chromosomes. When compared with diploid individuals (2n = 54) and the morphological standard of chromosomes, this male is a triploid with 3 = 81 chromosomes. Since staining with silver nitrate indicates three active nucleolar organizer regions (NORs), the three NOR- bearing chromosomes in this individual are genetically active. Analysis of the synaptonemal complex (SC) by electronic microscopy shows that there is an incomplete pairing of the third set of chromosomes in the triploid individual.

X chromosome heterochromatic pattern and nucleolar synthesis in pupal ovaries of Aedes aegypti

C-banding and silver-staining techniques were used to examine pupal ovaries of Aedes aegypti from Sao Jose do Rio Preto (Brazil). Silver staining in ovary cystocytes showed two basic patterns relative to the nucleolar morphology: viz (1) a single, compact small body; and (2) multiple bodies encompassing large nuclear areas. These two types of cystocytes were present in the ratio of 7:1, which is the same as the number of nurse cells and oocytes, respectively, in each follicle. This suggests the possibility of eventually using such a nucleolar morphological difference to recognize both cell types in developmental stages before emergence. Silver nitrate staining in metaphase chromosomes revealed centromeric bands on all six chromosomes. The C-banding pattern in metaphase chromosomes showed an intercalary band in one of the X arms, as described previously in other populations. In ovary cystocytes (pachytene stage) this C-positive band seemed to consist of two chromomeres. Phase contrast microscopy showed that the nucleolus was associated with the distal chromomere of this intercalary C-band, indicating that the nucleolus organizer region was located in that part of the heterochromatic band.

Microleakage and nanoleakage: Influence of laser in cavity preparation and dentin pretreatment

Objective: the purpose of this study was to verify if the application of the Nd:YAG laser following pretreatment of dentin with adhesive systems that were not light cured in class V cavities and were prepared with Er:YAG laser would promote better sealing of the gingival margins when compared to cavities prepared the conventional way. Background Data: Previous studies had shown that the pretreatment of dentin with laser irradiation after the application of an adhesive system is efficient in achieving higher shear bond and tensile bond strength. Materials and Methods: Er:YAG laser (Kavo-Key, Germany) with 350 mJ, 4 Hz, and 116.7 J/cm(2) was used for cavity preparation. The conventional preparation was made with diamond bur mounted in high-speed turbine. Dentin treatment was accomplished using an Nd:YAG laser (Pulse Master 1000, ADT. USA) at 60 mJ, 10 Hz, and 74.65/cm(2) following application of the adhesive system. The cavities were stored with Single Bond/Z100 and Prime & Bond NT/TPH. Eighty bovine incisors were used, and class V preparations were done at buccal and lingual surfaces divided into eight groups: (1) Er:YAG preparation + Prime & Bond NT + TPH; (2) Er:YAG preparation + Single Bond + Z100; (3) Er:YAG preparation + Single Bond + Nd:YAG + Z100; (4) Er:YAG preparation + Prime & Bond NT + Nd:YAG + TPH; (5) conventional preparation + Prime & Bond NT + TPH; (6) conventional preparation + Single Bond + Z100; (7) conventional preparation + Single Bond + Nd:YAG + Z100; (8) conventional preparation + Prime & Bond NT + Nd:YAG + TPH. All specimens were thermocycled for 300 full cycles between 5 degreesC +/- 2 degreesC and 55 degreesC +/- 2 degreesC (dwell time of 30 sec), and stored in 50% silver nitrate solution for 24 h soaked in photodeveloping solution and exposed to fluorescent light for 6 h. After this procedure, the specimens were sectioned longitudinally in 3 portions and the extension of microleakage at the gingival wall was determined following a criteria ranging from 0 to 4 using scanning electron microscopy (SEM). The medium portion sectioned of each specimen was polished and prepared for nanoleakage avaliation by SEM. Results: Kruskall-Wallis and Miller statistical tests determined that group 3 presented less microleakage and nanoleakage. Conclusion: Application of the Nd:YAG laser following pretreatment of dentin with adhesive Single Bond non-photocured Single Bond adhesive in cavities prepared with Er:YAG promote better sealing of the gingival margins.

Efetividade do Argirol e do Povidine no pre-operatorio da catarata

Purpose: The purpose of this study was to evaluate the effectiveness of the Silver Vitelinate and Povidine as antiseptics used before the cataract surgery. Place: Faculdade de Medicina de Botucatu - UNESP. Method: Cultures were taken from the conjuntiva of 30 patients after the use of Silver Vitelinate (15 patients) and Povidine (15 patients) immediately before the cataract surgery. Result: Positive culture was observed in 8 patients that received Silver Vitelinate and 8 that received Povidine. Conclusion: The both antiseptics have the same effectiveness in reducing the microorganisms of the conjunctiva in the cataract preoperative preparation.

Use of one-bottle adhesive as an intermediate bonding layer to reduce sealant microleakage on saliva-contaminated enamel

Purpose: To evaluate the influence of three different adhesives, each used as an intermediary layer, on microleakage of sealants applied under condition of salivary contamination. Materials and Methods: Six different experimental conditions were compared, 3 with adhesives and 3 without. After prophylaxis and acid etching of enamel, salivary contamination was placed for 10 s. In Group SC the sealant was applied after saliva without bonding agent and then light-cured. In Group SCA, after saliva, the surface was air dried, and then the sealant was applied and cured. In Groups ScB, SB and PB, a bonding agent (Scotchbond Dual Cure/3M, Single Bond/3M and Prime & Bond 2.1/Dentsply, respectively) was applied after the saliva and prior to the sealant application and curing. After storage in distilled water at 37°C for 24 hrs, the teeth were submitted to 500 thermal cycles (5°C and 55°C), and silver nitrate was used as a leakage tracer. Leakage data were collected on cross sections as percentage of total enamel-sealant interface length. Representative samples were evaluated under SEM. Results: Sealants placed on contaminated enamel with no bonding agent showed extensive microleakage (94.27% in SC; 42.65% in SCA). The SEM revealed gaps as wide as 20 μm in areas where silver nitrate leakage could be visualized. In contrast, all bonding agent groups showed leakage less than 6.9%. Placement of sealant with a dentin-bonding agent on contaminated enamel significantly reduced microleakage (P< 0.0001). The use of a bonding agent as an intermediary layer between enamel and sealant significantly reduced saliva's effect on sealant microleakage.

Nucleotide sequence of 5S rDNA and localization of the ribosomal RNA genes to metaphase chromosomes of the Tilapiine cichlid fish, Oreochromis niloticus

In this study, we report the cloning and nucleotide sequence of PCR-generated 5S rDNA from the Tilapiine cichlid fish, Oreochromis niloticus. Two types of 5S rDNA were detected that differed by insertions and/or deletions and base substitutions within the non-transcribed spacer (NTS). Two 5S rDNA loci were observed by fluorescent in situ hybridization (FISH) in metaphase spreads of tilapia chromosomes. FISH using an 18S rDNA probe and silver nitrate sequential staining of 5S-FISH slides showed three 18S rDNA loci that are not syntenic to the 5S rDNA loci.

Evaluation of marginal microleakage in Class II cavities: Effect of microhybrid, flowable, and compactable resins

Objective: The goal of the present study was to evaluate the microleakage on the cementum/dentin and enamel surfaces in Class II restorations, using different kinds of resin composite (microhybrid, flowable, and compactable). Method and materials: Forty human caries-free molars were extracted and selected. Eighty Class II standardized cavities were made in the cervical wall at the cementoenamel junction (CEJ) and at the mesial and distal surfaces. The teeth were divided into four groups: G1 - adhesive system + microhybrid resin composite Z100; G2 - adhesive system + compactable resin composite Prodigy Condensable; G3 - adhesive system + flowable resin composite Revolution + Z100 resin composite; G4 - adhesive system + Revolution fluid resin + compactable resin composite Prodigy Condensable. The adhesive system used in this study was Scotchbond Multi-Purpose Plus. The specimens were thermocycled in baths of 5°C and 55°C for 1,000 cycles and immersed in 50% silver nitrate solution. The specimens then were sectioned and evaluated on degree of dye penetration. Results: The results were evaluated using the nonparametric Kruskall-Wallis test, which showed a statistically significant difference between groups G1 and G4, G2 and G4, and G3 and G4. Conclusions: None of the materials was able to eliminate the marginal microleakage at the cervical wall; the application of a low-viscosity resin composite combined with a compactable resin composite significantly decreased the microleakage.

Effects of dentin collagen removal on microleakage of bonded restorations

Purpose: To evaluate the effects of removing dentin collagen exposed by acid etching on the microleakage of bonded restorations with and without flowable composite application and submitted to thermocycling and long-term water storage. Materials and Methods: Standardized Class V cavities were prepared in 180 bovine incisors. They were randomly assigned to three groups according to the adhesive technique used. Conventional group (C): Single Bond was applied according to the manufacturer's instructions and Z250 composite was placed. Hypochlorite group (H): After acid etching a 10% NaOCl aqueous solution was applied for 1 min, then Single Bond and Z250 were applied. Hypochlorite and Flowable group (HF): Similar to group H, but following adhesive application, a thin layer of Natural Flow flowable composite was applied before the Z250. Each group was divided into three subgroups (0, 6, 12), which remained immersed in distilled water for 24 h or 6 or 12 months and underwent 500, 1500 or 2500 thermal cycles, respectively. At the end of each storage time, the specimes were stained with silver nitrate, decalcified, immersed in methyl salicylate for clearing and observed under a stereomicroscope to determine microleakage (scores 0 to 4). The data were analyzed using the Kruskal-Wallis and the Multiple Comparison Tests (α = 0.05). Results: After 12 months, every group showed significant increases in microleakage. There was no significant difference between Groups H and HF for the three different periods of time, but they showed statistically less microleakage than Group C. Conclusion: The removal of dentinal collagen reduced the marginal microleakage when compared to the conventional technique. The use of the flowable composite did not produce significant effects. No technique was completely effective in preventing microleakage.

Influence of cavity preparation and curing method on the marginal seal of resin composite restorations: an in vitro evaluation.

OBJECTIVE: To evaluate the influence of cavity design and photocuring method on the marginal seal of resin composite restorations. METHOD AND MATERIALS: Seventy-two bovine teeth were divided into 2 groups: group 1 received box-type cavity preparations, and group 2 received plate-type preparations. Each group was divided into 3 subgroups. After etching and bonding, Z250 resin composite (3M Espe) was applied in 2 equal increments and cured with 1 of 3 techniques: (1) conventional curing for 30 seconds at 650 mW/cm2; (2) 2-step photocuring, in which the first step was performed 14 mm from the restoration for 10 seconds at 180 mW/cm2 and the second step was performed in direct contact for 20 seconds at 650 mW/cm2; or (3) progressive curing using Jetlite 4000 (J. Morita) for 8 seconds at 125 mW/cm2 and then 22 seconds at 125 mW/cm2 up to 500 mW/cm2. The specimens were thermocycled for 500 cycles and then submitted to dye penetration with a 50% silver nitrate solution. Microleakage was assessed using a stereomicroscope. Data were analyzed using analysis of variance and Tukey test (5% level of significance). RESULTS: A statistically significant difference was found between groups when a double interaction between photocuring and cavity preparation was considered (P = .029). CONCLUSIONS: No one type of cavity preparation or photocuring method prevented micro-leakage. The plate-type preparation showed the worst dye penetration when conventional and progressive photocuring methods were used. The best results were found using the 2-step photocuring with the plate-type preparation.