Intern pharmacists as change agents to improve the practice of nonprescription medication supply: provision of salbutamol to patients with asthma

BACKGROUND: Earlier work established an evidence practice gap during provision of nonprescription salbutamol (albuterol). Pharmacist interns are hypothesized to be in a position to improve professional practice in the community pharmacy setting. OBJECTIVE: To explore the potential of intern pharmacists to improve the professional practice of community pharmacy staff in the provision of nonprescription salbutamol. METHODS: Intern pharmacists (n = 157) delivered an asthma intervention in 136 pharmacies consisting of an educational activity to pharmacy staff and a health promotion campaign to consumers. Post-intervention, simulated patients presented to 100 intervention and 100 control community pharmacies with a request for salbutamol. The appropriate outcome was medical referral for poor asthma control and correction of poor inhaler technique. Incidence and quantity of patient assessment and counseling provided during the visit were also assessed. Logistic regression was used to determine the predictors of medical referral. RESULTS: A doubling in the rate of medical referral was seen in the intervention group (19% vs 40%; p = 0.001). Assessment of reliever use frequency was the main predictor of medical referral (OR = 22.7; 95% CI 9.06 to 56.9). Correction of poor inhaler technique did not improve; however, a reduction in salbutamol supplied without patient assessment (23% vs 8%; p = 0.009) or counseling (75% vs 48%; p < 0.001) was noted. CONCLUSIONS: A doubling in the rate of medical referral showed a clear improvement in professional practice during the provision of nonprescription salbutamol. The improved patient outcome in the intervention group was due to increased assessment of reliever use frequency. Identification of poor inhaler technique remained near zero in both groups, which suggests that intern pharmacists were able to improve the current practice of community pharmacies yet were unable to establish a new practice behavior. This study provides evidence that intern pharmacists can act as change agents to improve pharmacy practice.

Proof in the pedagogic pudding? The challenges of promoting evidence-based teaching practice in a research-focused institution

Drawing upon the findings of a mixed methodological study, this paper critically analyses the cultural, pedagogical, and organisational issues encountered by academics and support staff working within a newly established Centre for Learning Innovation and Professional Practice tasked with facilitating a new teaching-focused policy in a previously research-led institution. The aim of this policy is to assure that, across the institution, teaching is given the same priority and kudos as research. Focusing specifically staff perceptions of the impact of the new policy on various aspects of academic life including, pedagogic practice, student support, staff training, and organisational management, the paper critically addresses the cultural and attitudinal challenges of change management (Kotter, 1996) within a ‘grey-brick’ university. In doing so it makes a significant contribution to current academic theory and debate in the areas of pedagogic practice and organisational management.

A matter of professionalism? Reflection and reflexivity in continuing engineering education and practice

The argument that this paper sets out to critique is that in order to promote professionalism in Engineering Education and Practice, graduate level engineering programmes need to introduce the concepts of reflection and reflexivity into the curriculum right from the onset. By focusing upon the delivery of a newly developed „Work Based‟ Master’s level programme in Professional Engineering, this paper provides an overview of the first part of an empirical study which sets out to investigate the challenges associated with embedding reflection and reflexivity into Engineering Education. The paper concludes by noting that whilst student engineers may struggle with the concepts of reflection and reflexivity, with support and encouragement such difficulties can be overcome. Moreover, by encouraging students to reflect upon their Professional Practice, the programme not only enables students to consider how they may apply what they have learnt to their Professional Practice, but also encourages them to think about how they can link their experiences as Professional Engineers to what and how they learn both whilst on the programme but also as lifelong learners.

The spiritual and professional impact of stillbirth

Stillbirth is without question one of the most devastating experiences of grief for parents and families. The death of a baby is also a distressing experience for healthcare professionals who share hopes of a live healthy baby at the end of pregnancy. It is a sad reality however, that in Ireland one in 238 babies will die before birth. The creation and nurture of new life in pregnancy is a spiritual experience as a new baby is at the same time experienced and anticipated. There is little in the published literature concerning the spiritual impact of stillbirth on healthcare chaplains who are the main providers of spiritual care for parents and staff colleagues in Irish maternity units. In addition there are few qualitative studies that explore the impact of stillbirth on consultant obstetricians and no published studies on the spiritual impact of stillbirth on bereaved parents. This study explored the spiritual and professional impact of stillbirth on Irish maternity healthcare chaplains, consultant obstetricians and bereaved parents. Following an overall review of spiritual care provision following stillbirth in the Irish maternity services, thematic analysis was used in the first phase of the study following in-depth interviews with maternity healthcare chaplains. Interpretative Phenomenological Analysis was used in the second and third phases with consultant obstetricians and bereaved parents respectively. The data from both maternity healthcare chaplains and consultant obstetricians revealed that stillbirth posed immense personal, spiritual and professional challenges. Chaplains expressed the spiritual and professional impact of stillbirth in terms of perception of their role, suffering, doubt and presence as they provided care for bereaved parents. A review of spiritual care provision in the Irish maternity services revealed a diversity of practice. The data from consultant obstetricians identified considerable personal, professional and spiritual impact following stillbirth that was identified in superordinate themes of human response to stillbirth, weight of professional responsibility, conflict of personal faith and incongruence between personal faith and professional practice. Data from bereaved parents revealed that stillbirth was spiritually challenging and all parents expressed that stillbirth posed considerable challenge to their faith/ belief structure. The parents of only three babies felt that their spiritual needs were adequately addressed while in hospital. The data had six superordinate themes of searching for meaning, maintaining hope, importance of personhood, protective care, questioning core beliefs and relationships. Other findings from the data from bereaved parents outlined the importance of environment of care and communication. This study has revealed the immense impact of stillbirth on healthcare chaplains, consultant obstetricians and most especially the spiritual impact for bereaved parents. Recommendations are made for improvements in clinical and spiritual care for bereaved parents following stillbirth and for staff wellbeing and support initiatives. Further research areas are recommended in the areas of spiritual care, theological reflection, bereavement care, post-mortem consent procedures and staff wellbeing.

Occupational therapists’ perceptions of occupation in practice : an exploratory study

Building mentoring capacities in experienced teachers

While teacher education equips beginning teachers with critical knowledge and skills about teaching and fosters an understanding of learning in and from teaching some of the most critical elements of teaching are only learned in the workplace when beginning teachers commence their professional teaching careers. This transition to professional practice may be facilitated by mentoring from a more experienced teacher. Expert mentoring assists beginning teachers to build their teaching capacities more quickly and also lays the foundation for innovative professional practice. However, the presence of a mentor alone is not sufficient with the success of mentoring reliant on the skills and knowledge of mentors. Mentoring relationships are most effective when mentors are trained for their roles. While mentor preparation is the single most important factor in contributing to mentoring success, few teachers receive formal training to prepare them adequately for mentoring roles. The purpose of this paper is to report on the implementation of a mentoring development program designed to build mentoring capacities in experienced teachers. The program was trialled in a school in rural Australia. A range of qualitative data was collected from participants over the duration of the mentoring program and follow up data collected six months subsequent to the conclusion of the program.

BIM – implications for government

As ‘The Architect’s Handbook of Professional Practice’ (cited by Riskus (2007) suggests, Building Information Modelling, or BIM, is “the use of virtual building information models to develop building design solutions, design documentation, and to analyse construction processes”. We would suggest such a definition, while useful, should be extended to include the operational phases of built assets (such as maintenance and decommissioning), and also be applied to the whole area of infrastructure. As a set of technologies, BIM holds promise to deliver benefits for the property, construction, and infrastructure management industries – particularly improved efficiencies and effectiveness through enhanced collaboration at all stages of the construction cycle. There are several important qualifiers, barriers, enablers, and some disadvantages with this suite of technologies. This report outlines the costs and benefits enablers and barriers associated with BIM, and makes suggestions about how these issues may be addressed.

The criminalisation of medical mistakes in Canada : a review

The issue of health professionals facing criminal charges of manslaughter or criminal negligence causing death or grievous bodily harm as a result of alleged negligence in their professional practice was thrown into stark relief by the recent acquittal of four physicians accused of mismanaging Canada’s blood system in the early 1980s. Stories like these, as well as international reports detailing an increase in the numbers of physicians being charged with (and in some cases convicted of) serious criminal offences as the result of alleged negligence in their professional practice, have resulted in some anxiety about the apparent increase in the incidence of such charges and their appropriateness in the healthcare context. Whilst research has focused on the incidence, nature and appropriateness of criminal charges against health professionals, particularly physicians, for alleged negligence in their professional practice in the United Kingdom, the United States, Japan, and New Zealand, the Canadian context has yet to be examined. This article examines the Canadian context and how the criminal law is used to regulate the negligent acts or omissions of a health care professional in the course of their professional practice. It also assesses the appropriateness of such use. It is important at this point to state that the analysis in this article does not focus on those, fortunately few, cases where a health professional has intentionally killed his or her patients but rather when patients’ deaths or grievous injuries were allegedly as a result of that health professional’s negligent acts or omissions when providing health services to that patient.

Automated code checking

Most buildings constructed in Australia must comply with the Building Code of Australia (BCA). Checking for compliance against the BCA is a major task for both designers and building surveyors. This project carries out a prototype research using the EDM Model Checker and the SMC Model Checker for automated design checking against the Building Codes of Australia for use in professional practice. In this project, we develop a means of encoding design requirements and domain specific knowledge for building codes and investigate the flexibility of building models to contain design information. After assessing two implementations of EDM and SMC that check compliance against deemed-to-satisfy provision of building codes relevant to access by people with disabilities, an approach to automated code checking using a shared object-oriented database is established. This project can be applied in other potential areas – including checking a building design for non-compliance of many types of design requirements. Recommendations for future development and use in other potential areas in construction industries are discussed

A collaborative model for learning and assessment of legal placements

This paper will report on the evaluation of a new undergraduate legal workplace unit, LWB421 Learning in Professional Practice. LWB421 was developed in response to the QUT’s strategic planning and a growing view that work experience is essential to developing the skills that law graduates need in order to be effective legal practitioners (Stuckey, 2007). Work integrated learning provides a context for students to develop their skills, to see the link between theory and practice and support students in making the transition from university to practice (Shirley, 2006). The literature in Australian legal education has given little consideration to the design of legal internship subjects (as distinct from legal clinic programs). Accordingly the design of placement subjects needs to be carefully considered to ensure alignment of learning objectives, learning tasks and assessment. Legal placements offer students the opportunity to develop their professional skills in practice, reflect on their own learning and job performance and take responsibility for their career development and planning. This paper will examine the literature relating to the design of placement subjects, particularly in a legal context. It will propose a collaborative model to facilitate learning and assessment of legal work placement subjects. The basis of the model is a negotiated learning contract between the student, workplace supervisor and academic supervisor. Finally the paper will evaluate the model in the context of LWB421. The evaluation will be based on data from surveys of students and supervisors and focus group sessions.

Automated code checking

Most buildings constructed in Australia must comply with the Building Code of Australia (BCA). Checking for compliance against the BCA is a major task for both designers and building surveyors. This project carries out a prototype research using the EDM Model Checker and the SMC Model Checker for automated design checking against the Building Codes of Australia for use in professional practice. In this project, we develop a means of encoding design requirements and domain specific knowledge for building codes and investigate the flexibility of building models to contain design information. After assessing two implementations of EDM and SMC that check compliance against deemed-to-satisfy provision of building codes relevant to access by people with disabilities, an approach to automated code checking using a shared object-oriented database is established. This project can be applied in other potential areas – including checking a building design for non-compliance of many types of design requirements. Recommendations for future development and use in other potential areas in construction industries are discussed.

Stability of the learning and development survey : findings for mature aged local government and private healthcare organisations.

This article investigates work related learning and development amongst mature aged workers from a lifespan developmental psychology perspective. The current study follows on from research regarding the construction and revision of the Learning and Development Survey (LDS; Tones & Pillay, 2008). Designed to measure adaptive development for work related learning, the revised LDS (R-LDS) encompasses goal selection, engagement and disengagement from individual and organisational perspectives. Previous survey findings from a mixed age sample of local government workers suggest that mature aged workers aged over 45 years are less likely to report engagement in learning and development goals than younger workers, which is partly due to insufficient opportunities at work. In the current paper, exploratory factor analysis was used to investigate responses to the R-LDS amongst two groups of mature aged workers from a local government (LG) and private healthcare (PH) organisation to determine the stability of the R-LDS. Organisational constraints to development accounted for almost a quarter of the variance in R-LDS scores for both samples, while remaining factors emerged in different orders for each data set. Organisational opportunities for development explained about 17% of the variance in R-LDS scores in the LG sample, while the individual goal disengagement factor contributed a comparable proportion of variance to R-LDS scores for the PH sample. Findings from the current study indicate that opportunities for learning and development at work may be age structured and biased towards younger workers. Implications for professional practice are discussed and focus on improving the engagement of mature aged workers.

An extended CDIO syllabus framework with preparatory engineering proficiencies

The CDIO Initiative has been globally recognised as an enabler for engineering education reform. With the CDIO process, the CDIO Standards and the CDIO Syllabus, many scholarly contributions have been made around cultural change, curriculum reform and learning environments. In the Australasian region, reform is gaining significant momentum within the engineering education community, the profession, and higher education institutions. This paper presents the CDIO Syllabus cast into the Australian context by mapping it to the Engineers Australia Graduate Attributes, the Washington Accord Graduate Attributes and the Queensland University of Technology Graduate Capabilities. Furthermore, in recognition that many secondary schools and technical training institutions offer introductory engineering technology subjects, this paper presents an extended self-rating framework suited for recognising developing levels of proficiency at a preparatory level. The framework is consistent with conventional application to undergraduate programs and professional practice, but adapted for the preparatory context. As with the original CDIO framework with proficiency levels, this extended framework is informed by Bloom’s Educational Objectives. A proficiency evaluation of Queensland Study Authority’s Engineering Technology senior syllabus is demonstrated indicating proficiency levels embedded within this secondary school subject within a preparatory scope. Through this extended CDIO framework, students and faculty have greater awareness and access to tools to promote (i) student engagement in their own graduate capability development, (ii) faculty engagement in course and program design, through greater transparency and utility of the continuum of graduate capability development with associate levels of proficiency, and the context in which they exist in terms of pre-tertiary engineering studies; and (iii) course maintenance and quality audit methodology for the purpose of continuous improvement processes and program accreditation.

A comparison of international occupational therapy competencies : implications for Australian standards in the new millennium

Background/aim: A timely evaluation of the Australian Competency Standards for Entry-Level Occupational Therapists© (1994) was conducted. This thorough investigation comprised a literature review exploring the concept of competence and the applications of competency standards; systematic benchmarking of the Australian Occupational Therapy Competency Standards (OT AUSTRALIA, 1994) against other national and international competency standards and other affiliated documents, from occupational therapy and other cognate disciplines; and extensive nationwide consultation with the professional community. This paper explores and examines the similarities and disparities between occupational therapy competency standards documents available in English from Australia and other countries.----- Methods: An online search for national occupational therapy competency standards located 10 documents, including the Australian competencies.----- Results: Four 'frameworks' were created to categorise the documents according to their conceptual underpinnings: Technical-Prescriptive, Enabling, Educational and Meta-Cognitive. Other characteristics that appeared to impact the design, content and implementation of competency standards, including definitions of key concepts, authorship, national and cultural priorities, scope of services, intended use and review mechanisms, were revealed.----- Conclusion: The proposed 'frameworks' and identification of influential characteristics provided a 'lens' through which to understand and evaluate competency standards. While consistent application of and attention to some of these characteristics appear to consolidate and affirm the authority of competency standards, it is suggested that the national context should be a critical determinant of the design and content of the final document. The Australian Occupational Therapy Competency Standards (OT AUSTRALIA, 1994) are critiqued accordingly, and preliminary recommendations for revision are proposed.

Empowerment for lifelong learning : embedding information literacy into the business curriculum

Success in modern business demands effective information literacy to address the ever-changing business context. This context includes changes in Government policy reflected through legislation and regulations, developments in case law and expectations of professional associations and the public. Students require the skills to continue their own learning beyond the completion of their degree, since learning the subject content of a course alone sufficient. This paper considers the methods utilised to embed information literacy, in the context of generic skills and graduate attributes, into a Business degree’s curriculum. The paper describes how information literacy has been embedded in two sequential third-year Taxation Law courses, allowing for the explicit development of information literacy. Through the development of legal reasoning and research skills, students are empowered to continue their lifelong learning, which successful professional practice demands. The study will draw upon the experience of the course convener in designing, teaching and evaluating the courses, and on students’ experiences as illustrated through evaluation questionnaire responses and interviews. The findings of this study could be relevant to other business courses, especially company law and auditing.