Nonparametric Measures of Capacity Utilization: A Dual Approach

This paper develops a nonparametric method of obtaining the minimum of the long run average cost curve of a firm to define its capacity output. This provides a benchmark for measuring of capacity utilization at the observed output level of the firm. In the case of long run constant returns to scale, the minimum of the short run average cost curve is determined to measure short run capacity utilization. An empirical application measures yearly rates of capacity utilization in U.S. manufacturing over the period 1968-1998. Nonparametric determination of the short run average cost curve under variable returns to scale using an iterative search procedure is described in an appendix to this paper.

Are Some Indian Bank Too Large? A Examination of Size Efficiency in Indian Banking

In this paper we use data from the years 1997 through 2003 to evaluate the size efficiency of Indian banks. Following Maindiratta (1990) we consider a bank to be too large if breaking it up into a number of smaller units would result in a larger output bundle than what could be produced from the same input by a single bank. When this is the case, the bank is not size efficient. Our analysis shows that many of the banks are, in deed, too large in various years. We also find that often a bank is operating in the region of diminishing returns to scale but is not a candidate for break up.

Behavioral characteristics of applied general equilibrium models with an Armington-Krugman-Melitz encompassing module

This paper explore how simulation results change with different choice of trade specification, and the strength of preference for traded variety by economic agent differs, utilizing two types of three-region, three-sector AGE model that includes the Armington-Krugman-Melitz Encompassing module based on Dixon and Rimmer (2012). Simulation experiments reveal that: (1) the Melitz-type specification does not always enhance effectiveness of a certain policy change more than the one obtained with the Krugman-type, especially when economic agents' preference for traded variety is not so strong; (2) there are likely to be points where the volumes of effects obtained with the Melitz-type exceed the ones with the Krugman-type; and (3) the preference of the producers, those who are in the sectors that exhibit increasing returns to scale, for traded variety might be the engine of explosive effects as suggested by Fujita, et al. (2000).

Eficiencia en la distribución: una aplicación en el sector de agencias de viajes

El objetivo de este trabajo consiste en estimar la eficiencia productiva y de escala con la que operan los intermediarios del sector minorista español de distribución turístico. Adicionalmente, se pretende examinar los determinantes de la eficiencia en términos de la integración vertical, concentración horizontal, tamaño y resultados de las entidades. La metodología aplicada se apoya en diversas técnicas de medición de eficiencia (paramétrica de naturaleza estocástica y no paramétrica del Análisis Envolvente de Datos, DEA), así como en modelos tobit para conocer el impacto de los factores del mercado y de la empresa sobre los niveles de eficiencia. La aplicación empírica realizada en una muestra de 50 agencias de viaje de nuestro país evidencia, por un lado, unos elevados índices de ineficiencia técnica y de escala, destacando en el último caso los rendimientos decrecientes; y por otro, que el tamaño y el ROA son los factores determinante de la eficiencia de escala, mientras que la concentración del mercado explica la eficiencia técnica.

Malmquist indexes using a geometric distance function (GDF)

Traditional approaches to calculate total factor productivity change through Malmquist indexes rely on distance functions. In this paper we show that the use of distance functions as a means to calculate total factor productivity change may introduce some bias in the analysis, and therefore we propose a procedure that calculates total factor productivity change through observed values only. Our total factor productivity change is then decomposed into efficiency change, technological change, and a residual effect. This decomposition makes use of a non-oriented measure in order to avoid problems associated with the traditional use of radial oriented measures, especially when variable returns to scale technologies are to be compared.

An analysis of costs in institutions of higher education in England

Cost functions are estimated, using random effects and stochastic frontier methods, for English higher education institutions. The article advances on existing literature by employing finer disaggregation by subject, institution type and location, and by introducing consideration of quality effects. Estimates are provided of average incremental costs attached to each output type, and of returns to scale and scope. Implications for the policy of expansion of higher education are discussed.

Improving envelopment in data envelopment analysis

Data envelopment analysis defines the relative efficiency of a decision making unit (DMU) as the ratio of the sum of its weighted outputs to the sum of its weighted inputs allowing the DMUs to freely allocate weights to their inputs/outputs. However, this measure may not reflect a DMU's true efficiency as some inputs/outputs may not contribute reasonably to the efficiency measure. Traditionally, to overcome this problem weights restrictions have been imposed. This paper offers a new approach to this problem where DMUs operate a constant returns to scale technology in a single input multi-output context. The approach is based on introducing unobserved DMUs, created by adjusting the output levels of certain observed relatively efficient DMUs, reflecting a combination of technical information of feasible production levels and the DM's value judgments. Its main advantage is that the information conveyed by the DM is local, with reference to a specific observed DMU. The approach is illustrated on a real life application. © 2003 Elsevier B.V. All rights reserved.

Efficiency in Islamic and conventional banking:an international comparison

The paper investigates the efficiency of a sample of Islamic and conventional banks in 10 countries that operate Islamic banking for the period 1996–2002, using an output distance function approach. We obtain measures of efficiency after allowing for environmental influences such as country macroeconomic conditions, accessibility of banking services and bank type. While these factors are assumed to directly influence the shape of the technology, we assume that country dummies and bank size directly influence technical inefficiency. The parameter estimates highlight that during the sample period, Islamic banking appears to be associated with higher input usage. Furthermore, by allowing for bank size and international differences in the underlying inefficiency distributions, we are also able to demonstrate statistically significant differences in inefficiency related to these factors even after controlling for specific environmental characteristics and Islamic banking. Thus, for example, our results suggest that Sudan and Yemen have relatively higher inefficiency while Bahrain and Bangladesh have lower estimated inefficiency. Except for Sudan, where banks exhibits relatively strong returns to scale, most sample banks exhibit very slight returns to scale, although Islamic banks are found to have moderately higher returns to scale than conventional banks. While this suggests that Islamic banks may benefit from increased scale, we would emphasize that our results suggest that identifying and overcoming the factors that cause Islamic banks to have relatively low potential outputs for given input usage levels will be the key challenge for Islamic banking in the coming decades.

Efficiency and total factor productivity changes of Malaysian commercial banks

This paper analyses the efficiency of Malaysian commercial banks between 1996 and 2002 and finds that while the East Asian financial crisis caused a short-term increase in efficiency in 1998 primarily due to cost-cutting, increases in non-performing loans after the crisis caused a more sustained decline in bank efficiency. It is also found that mergers, fully Islamic banks, and conventional banks operating Islamic banking windows are all associated with lower efficiency. The paper estimates suggest mild decreasing returns to scale, and an average productivity change of 2.37% that is primarily attributable to technical change, which has nonetheless declined over time. Finally, while Islamic banks have been moderately successful in developing new products and technologies, the results suggest that the potential for Islamic banks to overcome their relative inefficiency is limited.

Efficiency in Islamic and conventional banking:an international comparison

The paper investigates the efficiency of a sample of Islamic and conventional banks in 10 countries that operate Islamic banking for the period 1996 to 2002, using an output distance function approach. We obtain measures of efficiency after allowing for environmental influences such as country macroeconomic conditions, accessibility of banking services and bank type. While these factors are assumed to directly influence the shape of the technology, we assume that country dummies directly influence technical inefficiency. The parameter estimates highlight that during the sample period, Islamic banking appear to be associated with higher input usage. Furthermore, by allowing for international differences in the underlying inefficiency distributions, we are also able to demonstrate statistically significant differences in efficiency across countries even after controlling for specific environmental characteristics and Islamic banking. Thus, for example, our results suggest that Sudan and Yemen have relatively higher inefficiency while Iran and Malaysia have lower estimated inefficiency. Except for Sudan, where banks exhibits relatively strong returns to scale, most sample banks exhibit very slight returns to scale, although Islamic banks are found to have moderately higher returns to scale than conventional banks. However while this suggests that Islamic banks may benefit from increased scale, we would emphasize that our results suggest that identifying and overcoming the factors that cause Islamic banks to have relatively high input requirements will be the key challenge for Islamic banking in the coming decades.

An integer-valued data envelopment analysis model with bounded outputs

Integer-valued data envelopment analysis (DEA) with alternative returns to scale technology has been introduced and developed recently by Kuosmanen and Kazemi Matin. The proportionality assumption of their introduced "natural augmentability" axiom in constant and nondecreasing returns to scale technologies makes it possible to achieve feasible decision-making units (DMUs) of arbitrary large size. In many real world applications it is not possible to achieve such production plans since some of the input and output variables are bounded above. In this paper, we extend the axiomatic foundation of integer-valuedDEAmodels for including bounded output variables. Some model variants are achieved by introducing a new axiom of "boundedness" over the selected output variables. A mixed integer linear programming (MILP) formulation is also introduced for computing efficiency scores in the associated production set. © 2011 The Authors. International Transactions in Operational Research © 2011 International Federation of Operational Research Societies.

Assessment of national health systems performance in the WHO African region

There is growing peer and donor pressure on African countries to utilize available resources more efficiently in a bid to support the ongoing efforts to expand coverage of health interventions with a view to achieving the health-related Millennium Development Goals. The purpose of this study was to estimate the technical and scale efficiency of national health systems in African continent. Methods The study applied the Data Envelopment Analysis approach to estimate the technical efficiency and scale efficiency among the 53 countries of the African Continent. Results Out of the 38 low-income African countries, 12 countries national health systems manifested a constant returns to scale technical efficiency (CRSTE) score of 100%; 15 countries had a VRSTE score of 100%; and 12 countries had a SE score of one. The average variable returns to scale technical efficiency (VRSTE) score was 95% and the mean scale efficiency (SE) score was 59%; meaning that while on average the degree of inefficiency was only 5%, the magnitude of scale inefficiency was 41%. Of the 15 middle-income countries, 5 countries, 9 countries and 5 countries had CRSTE, VRSTE and SE scores of 100%. Ten countries, six countries and 10 countries had CRSTE, VRSTE and SE scores of less than 100%; and thus, they were deemed inefficient. The average VRSTE (i.e. pure efficiency) score was 97.6%. The average SE score was 49.9%. Conclusion There are large unmet need for health and health-related services among countries of the African Continent. Thus, it would not be advisable for health policy-makers address NHS inefficiencies through reduction in excess human resources for health. Instead, it would be more prudent for them to leverage health promotion approaches and universal access prepaid (tax-based, insurance-based or mixtures) health financing systems to create demand for under utilised health services/interventions with a view to increasing ultimate health outputs to efficient target levels.

Managing performance of organisational units with PIMsoft:a new DEA software

DEA literature continues apace but software has lagged behind. This session uses suitably selected data to present newly developed software which includes many of the most recent DEA models. The software enables the user to address a variety of issues not frequently found in existing DEA software such as: -Assessments under a variety of possible assumptions of returns to scale including NIRS and NDRS; -Scale elasticity computations; -Numerous Input/Output variables and truly unlimited number of assessment units (DMUs) -Panel data analysis -Analysis of categorical data (multiple categories) -Malmquist Index and its decompositions -Computations of Supper efficiency -Automated removal of super-efficient outliers under user-specified criteria; -Graphical presentation of results -Integrated statistical tests

Advances in data envelopment analysis

Since its introduction in 1978, data envelopment analysis (DEA) has become one of the preeminent nonparametric methods for measuring efficiency and productivity of decision making units (DMUs). Charnes et al. (1978) provided the original DEA constant returns to scale (CRS) model, later extended to variable returns to scale (VRS) by Banker et al. (1984). These ‘standard’ models are known by the acronyms CCR and BCC, respectively, and are now employed routinely in areas that range from assessment of public sectors, such as hospitals and health care systems, schools, and universities, to private sectors, such as banks and financial institutions (Emrouznejad et al. 2008; Emrouznejad and De Witte 2010). The main objective of this volume is to publish original studies that are beyond the two standard CCR and BCC models with both theoretical and practical applications using advanced models in DEA.

Non -traded goods, product differentiation and integration of factor markets

This research sought to determine the implications of a non-traded differentiated commodity produced with increasing returns to scale, for the welfare of countries that allowed free international migration. We developed two- and three-country Ricardian models in which labor was the only factor of production. The countries traded freely in homogeneous goods produced with constant returns to scale. Each also had a non-traded differentiated good sector where production took place using increasing returns to scale technology. Then we allowed for free international migration between two of the countries and observed what happened to welfare in both countries as indicated by their per capita utilities in the new equilibrium relative to their pre-migration utilities. ^ Preferences of consumers were represented by a two-tier utility function [Dixit and Stiglitz 1977]. As migration took place it impacted utility in two ways. The expanding country enjoyed the positive effect of increased product diversity in the non-traded good sector. However, it also suffered adverse terms-of-trade as its production cost declined. The converse was true for the contracting country. To determine the net impact on welfare we derived indirect per capita utility functions of the countries algebraically and graphically. Then we juxtaposed the graphs of the utility functions to obtain possible general equilibria. These we used to observe the welfare outcomes. ^ We found that the most likely outcomes were either that both countries gained, or one country lost while the other gained. We were, however, able to generate cases where both countries lost as a result of allowing free inter-country migration. This was most likely to happen when the shares of income spent on each country's export good differed significantly. In the three country world when we allowed two of the countries to engage in preferential trading arrangements while imposing a prohibitive tariff on imports from the third country welfare of the partner countries declined. When inter-union migration was permitted welfare declined even further. This we showed was due to the presence of the non-traded good sector. ^