HSP65 DNA as therapeutic strategy to treat experimental paracoccidioidomycosis

The conventional treatment for paracoccidioidomycosis, the most prevalent mycosis in Latin America, involves long periods of therapy resulting in sequels and high frequency of relapses. The search for new alternatives of treatment is necessary. Previously, we have demonstrated that the hsp65 gene from Mycobacterium leprae shows prophylactic effects against murine paracoccidioidomycosis. Here, we tested the DNAhsp65 immunotherapy in BALB/c mice infected with Paracoccidioides brasiliensis, the agent of paracoccidioidomycosis. We observed an increase of Th1 cytokines accompanied by a reduction in fungal burden and pulmonary injury. These results provide new prospects for immunotherapy of paracoccidioidomycosis and other mycoses. (C) 2009 Elsevier Ltd. All rights reserved.

In vitro antifungal drug susceptibilities of dermatophytes microconidia and arthroconidia

Objectives: Arthroconidia have been considered as the primary cause of infection by dermatophytes. However, the in vitro antifungal testing evaluates the responses mainly of microconidia or hyphae, and dermatophytes in vivo often produce arthroconidia, a cellular structure presumably more resistant to antifungals. The aim of this study was to compare the in vitro susceptibility of microconidia and arthroconidia of Trichophyton rubrum, Trichophyton tonsurans and Trichophyton equinum to griseofulvin, itraconazole, terbinafine, fluconazole, amphotericin B and hygromycin B. Methods: Microconidia and arthroconidia were produced in vitro, and their susceptibility to each drug was evaluated by assessing the CLSI M38-A broth microdilution method. Results: Arthroconidia of all strains analysed appeared to be more resistant to fluconazole, griseofulvin and itraconazole than microconidia. The MIC of terbinafine was the same for microconidia and arthroconidia for all strains, and the MIC of amphotericin B for microconidia and arthroconidia was the same for isolates of T. equinum and T. tonsurans, but differed for T. rubrum. Finally, the level of resistance of microconidia for all strains towards the antibiotic hygromycin B was from 25 to 400 mg/L. Conclusions: The difference in the susceptibility between microconidia and arthroconidia depends on the drug and on the strain, and may be one of the causes of therapeutic failure. Also, the level of resistance to the antibiotic hygromycin B presented by microconidia of these isolates will allow the use of hygromycin resistance as a dominant marker in fungal transformation procedures in future studies of gene function.

Visceral leishmaniasis and pregnancy: analysis of cases reported in a central-western region of Brazil

Objectives Because of the large number of cases of visceral leishmaniasis (VL) recorded in Brazil over the last few years, this disease has been showing characteristics different from previously known ones. We report cases of pregnant women treated for VL, describing their course and outcome and the chemotherapeutic medication used according to the clinical signs and symptoms of each patient. Study design We report five cases of pregnant women treated for VL in a central-western region of Brazil. Results No case of vertical transmission was observed, even in patients who were treated after delivery. One of the patients with a late diagnosis made after the onset of symptoms died. Thus, the treatment of VL during pregnancy reduces maternal mortality and the rate of vertical transmission of the disease, being safe and effective as long as the disease is diagnosed early. Conclusion At present, amphotericin B and its derivatives appear to be the best therapeutic option for the mother-child binomial.

Effects of adhesive temperature on the early and 6-month dentin bonding

Objectives: The aim of this study was to test the effect of adhesive temperature on the bond strength to dentin (mu TBS) and silver nitrate uptake (SNU) of an ethanol/water (Adper Single Bond 2 [SB]) and an acetone-based (Prime&Bond 2.1 [PB]) etch-and-rinse adhesive system. Methods: The bottles of each adhesive were kept in various temperatures (5 degrees C, 20 degrees C, 37 degrees C and 50 degrees C) for 1 h previously to its application in the occlusal demineralized dentin of 40 molars. Bonded sticks (0.8 mm(2)) were tested in tension (0.5 mm/min) immediately (IM) or after 6 months (6 M) of water storage. Two bonded sticks from each hemi-tooth were immersed in silver nitrate and analyzed by SEM. Data were analyzed by two-way repeated measures ANOVA and Tukey`s test (alpha = 0.05). Results: No significant difference in mu TBS was detected for both adhesives at 5 degrees C and 20 degrees C. The highest bond strength for PB was observed in the 37 degrees C group while for SB it was in the 50 degrees C. Significant reductions of bond strengths were observed for PB at 37 degrees C and SB at 50 degrees C after 6 M of water storage. Silver nitrate deposition was seen in all hybrid layers, irrespective of the group. Lower silver nitrate deposition (water trees) in the adhesive layer was seen for PB and SB at higher temperatures. Conclusions: The heating or refrigeration of the adhesives did not improve their resin-dentin bond resistance to water degradation over time. (C) 2009 Elsevier Ltd. All rights reserved.

Influence of irradiant energy on degree of conversion, polymerization rate and shrinkage stress in an experimental resin composite system

Objective. This study evaluated the degree of conversion (DC), maximum rate of cure (R(p)(max)), and polymerization stress (PS) developed by an experimental dental composite subjected to different irradiant energies (3,6,12, 24, or 48J/cm(2)) under constant irradiance (500 mw/cm(2)). Methods. DC and R(p)(max) were monitored for 10 min on the bottom surface of 2-mm thick disks and on 150-mu m thick films (representing the top of the specimen) using ATR-FTIR. PS was monitored for 10 min in 2-mm thick disks bonded to two glass rods (O = 5 mm) attached to a universal testing machine. One-way ANOVA/Tukey tests were used and differences in DC and R(p)(max) between top and bottom surfaces were examined using Student`s t-test. Statistical testing was performed at a pre-set alpha of 0.05. Results. For a given surface, DC showed differences among all groups, except at the top between 24 and 48 J/cm(2). R(p)(max) was similar among all groups at the same surface and statistically higher at the top surface. PS also showed significant differences among all groups. Data for 48 J/cm(2) were not obtained due to specimen failure at the glass/composite interface. Significance. Increases in irradiant exposure led to significant increases in DC and PS, but had no effect on R(p)(max) (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Adhesive Temperature: Effects on Adhesive Properties and Resin-Dentin Bond Strength

Objectives: To evaluate the effect of adhesive temperature on the resin-dentin bond strength (mu TBS), nanoleakage (NL), adhesive layer thickness (AL), and degree of conversion (DC) of ethanol/water- (SB) and acetone-based (PB) etch-and-rinse adhesive systems. Methods: The bottles of the two adhesives were kept at each temperature (5 degrees C, 20 degrees C, 37 degrees C, and 50 degrees C) for 2 hours before application to demineralized dentin surfaces of 40 molars. Specimens were prepared for mu TBS testing. Bonded sticks (0.8 mm(2)) were tested under tension (0.5 mm/min). Three bonded sticks from each tooth were immersed in silver nitrate and analyzed by scanning electron microscopy. The DC of the adhesives was evaluated by Fourier transformed infrared spectroscopy. Results: Lower mu TBS was observed for PB at 50 degrees C. For SB, the mu TBS values were similar for all temperatures. DC was higher at 50 degrees C for PB. Higher NL and thicker AL were observed for both adhesives in the 5 degrees C and 20 degrees C groups compared to the 37 degrees C and 50 degrees C groups. The higher temperatures (37 degrees C or 50 degrees C) reduced the number of pores within the adhesive layer of both adhesive systems. Conclusions: It could be useful to use an ethanol/water-based adhesive at 37 degrees C or 50 degrees C and an acetone-based adhesive at 37 degrees C to improve adhesive performance.

Development and biological evaluation of API-ILs based on anti-bacterial and anti-fungal drugs

In recent years Ionic Liquids (ILs) are being applied in life sciences. ILs are being produce with active pharmaceutical drugs (API) as they can reduce polymorphism and drug solubility problems [1] Also ILs are being applied as a drug delivery device in innovative therapies What is appealing in ILs is the ILs building up platform, the counter-ion can be carefully chosen in order to avoid undesirable side effects or to give innovative therapies in which two active ions are paired. This work shows ILs based on ampicillin (an anti-bacterial agent) and ILs based on Amphotericin B. Also we show studies that indicate that ILs based on Ampicillin could reverse resistance in some bacteria. The ILs produced in this work were synthetized by the neutralization method described in Ferraz et. al. [2] Ampicillin anion was combined with the following organic cations 1-ethyl-3-methylimidazolium, [EMIM]; 1-hydroxy-ethyl-3-methylimidazolium, [C2OHMIM]; choline, [cholin]; tetraethylammonium, [TEA]; cetylpyridinium, [C16pyr] and trihexyltetradecylphosphonium, [P6,6,6,14]. Amphotericin B was combined with [C16pyr], [cholin] and 1-metohyethyl-3-methylimidazolium, [C3OMIM]. The ILs-APIs based on ampicillin[2] were tested against sensitive Gram-negative bacteria Escherichia coli ATCC 25922 and Klebsiella pneumonia (clinical isolated), as well as on Gram positive Staphylococcus Aureus ATCC 25923, Staphylococcus epidermidis and Enterococcus faecalis. The arising resistance developed by bacteria to antibiotics is a serious public health threat and needs new and urgent measures. We study the bacterial activity of these compounds against a panel of resistant bacteria (clinical isolated strains): E. coli CTX M9, E. coli TEM CTX M9, E. coli TEM1, E. coli CTX M2, E. coli AmpC Mox2. In this work we demonstrate that is possible to produce ILs from anti-bacterial and anti-fungal compounds. We show here that the new ILs can reverse the bacteria resistance. With the careful choice of the organic cation, it is possible to create important biological and physic-chemical properties. This work also shows that the ion-pair is fundamental in ampicillin mechanism of action.

In vitro susceptibility of Paracoccidioides brasiliensis yeast form to antifungal agents

A study was conducted to determine the susceptibility of P. brasiliensis yeast form to amphotericin B (A), ketoconazole (K), 5-fluorocytosine (5-FC) and rifampin (R). The three isolates tested produced minimal inhibitory concentrations (MICs) (mcg/ml) in the following range: A: 0.09-0.18; K: 0.001-0.007; 5-FC: 62.5-250 and R: 40-80. The minimal fungicidal concentrations (MFC) were several times higher than the corresponding MICs. Precise MFC for 5-FC were not obtained (> 500 mcg/ml). Combination of K plus A proved synergic, with the fractional inhibitory concentration (FIC) indices revealing synergy when the drugs were combined at the 1 to 1 and 1 to 5 MIC ratios. R (40 mcg/ml) appeared to antagonize K. These results indicate promise for the combined use of K plus A as a therapeutical regimen.

Blood culture as a parameter of treatment effectiveness in experimental histoplasmosis of the hamster

The aim of this study was to determine the value of blood culture as a parameter of treatment effectiveness in experimental histoplasmosis. A total of thirty five hamsters, weighing approximately 120g, were inoculated intracardiacly with 0.1 ml of a suspension containing 4 x 10(7) cells/ml of the yeast phase of H. capsulatum. Treatments were started one week after the infection and lasted for 3 weeks. The azoles, (itraconazole, saperconazole and fluconazole) were administered once a day by gavage, at a dose of 8 mg/kg; Amphotericin B was given intraperitonealy every other day at a dose of 6mg/kg. Blood samples (1 ml) were obtained by heart punction from the 4th day after infection and were seeded in Sabouraud honey-agar and BHI-agar. The hamsters that survived were killed one week after treatment completion and the following criteria were considered for treatment evaluation: 1) rate of spontaneous death, at the end of the experience; 2) microscopic examination of Giemsa smears from liver and spleen and 3) determination of CFU in spleen cultures. Amphotericin B was the most effective drug, with negative blood cultures at day 20, negative spleen cultures in all cases and all the animals survived until the end of the study. Fluconazole was the less effective drug, blood cultures were positive during the whole experience, spleen cultures showed a similar average of CFU when compared with the control animals and 42.8% of these animals died. Saperconazole and itraconazole showed a similar activity, with survival of all hamsters and negative blood cultures at 23 and 26 days respectively. Blood culture seems to be valuable parameter for treatments' evaluation in experimental histoplasmosis of the hamster.

SUBCUTANEOUS PHEOHYPHOMYCOSIS CAUSED BY Phoma cava: REPORT OF A CASE AND REVIEW OF THE LITERATURE

We report a case of subcutaneous pheohyphomycosis observed in a male patient presenting pulmonary sarcoidosis and submitted to corticosteroid treatment. He presented nodular erythematous-violaceous skin lesions in the dorsum of the right hand. Histopathological examination of the biopsied lesion revealed dematiaceous hyphae and yeast-like cells, with a granulomatous tissual reaction. The isolated fungus was identified as Phoma cava. A review of the literature on fungal infection caused by different Phoma species, is presented. The patient healed after therapy with amphotericin B, followed by itraconazole

In vitro susceptibility testing of Fonsecaea pedrosoi to antifungals

Based on the difficulties experienced in the treatment of chromoblastomycosis, 12 primary human isolates of F. pedrosoi, were tested for their in vitro susceptibility to various antimycotics. We adapted the recommendations of the NCCLS for yeasts and followed the indications for mold testing from other authors in order to determine their MIC’s and the MLC’s. It was found that a significant proportion of the isolates were resistant to 3 of the 4 antimycotics tested, as revealed by high MIC values, as follows: 33% were resistant to amphotericin B (AMB), 58.3% to 5 fluocytosine (5 FC) and 66.7% to fluconazole (FLU). Contrarywise, none of the isolates proved resistant to itraconazole (ITZ). Determination of the MLC’s revealed that a larger proportion of the isolates were not killed by AMB, 5 FC (91.7%), FLU (100%) or even, ITZ (41.7%). These data indicate that it would be desirable to determine the susceptibility of F. pedrosoi before initiating therapy, in order to choose the more effective antifungal and avoid clinical failure

Development of Secondary Resistance to Fluconazole in Cryptococcus neoformans Isolated from a Patient with AIDS

Cryptococcus neoformans is the fifth most common opportunistic agent of infection in patients with AIDS in the USA, exceeded only by Candida species, Pneumocystis carinii, cytomegalovirus and Mycobacterium avium1, 2, 6, 10, 11. In Brazil is the sixth, exceeded by Candida species, P. carinii, Mycobacterium species, Toxoplasma gondii, and herpes simplex virus (AIDS, Boletim Epidemiológico, set/nov 96, Ministério da Saúde, Brasil). During 30 years, the treatment of C. neoformans meningitis was based on the use of amphotericin B with or without flucytosine13. Nowadays, with the immunodepression caused by human immunodeficiency virus (HIV) infection and the availability of new antifungal drugs as the triazoles, the concept related to cure and relapses of cryptococcosis has been altered7, 20. Patients are treated with amphotericin B with or without flucytosine as initial therapy, but maintenance therapy is always necessary in AIDS patients with C. neoformans infections

Acute disseminated histoplasmosis and endocarditis

Acute disseminated histoplasmosis is a frequent condition in HIV carriers. Thirty-five cases of endocarditis caused by Histoplasma capsulatum have been reported in international literature, and all these descriptions correspond to a context of subacute disseminated histoplasmosis. This paper presents the case of a HIV-positive patient with fever, dyspnea, weight loss, vomiting and polyadenopathies to whom histoplasmosis was diagnosed following blood-cultures and isolation of the agent responsible for cutaneous lesions, and in whom aortic-valve vegetations were found during an echocardiogram. The patient was treated with amphotericin B and had a good outcome; subsequent echocardiograms showed no vegetations. Literature on the subject is reviewed, with special emphasis on diagnosis and treatment of previously described cases.

Phialemonium curvatum infection after bone marrow transplantation

We report a case of cutaneous infection caused by Phialemonium curvatum GAMS et COOKE, 1983, after bone marrow transplantation. The genus Phialemonium was created by GAMS & MCGINNIS in 1983 including three new species: Ph. obovatum, Ph. curvatum and Ph. dimorphosporum, and represents an intermediate genus between Acremonium and Phialophora. Nowadays, the genus Phialemonium is considered to be a pheoid fungus which may cause the eventual lesions observed in pheo- and hyalohyphomycosis. Species of this genus have been described as opportunistic agents in humans and animals, mainly as a result of immunosuppression. In the present case, the patient had multiple myeloma and received an allogenic bone marrow transplant from his HLA-compatible brother. Two months after transplantation, he developed purplish and painful nodular lesions on the right ankle. Some of these lesions drained spontaneously and apparently hyaline mycelial filaments were observed, whose culture was initially identified as Acremonium sp. Subsequent studies showed that the fungus was Phialemonium curvatum. The infection was treated with amphotericin B, followed by ketoconazole. The patient was submitted to surgical debridement followed by two skin grafts to repair the bloody area. The duration of the treatment was 4 months and secondary prophylaxis with ketoconazole alone was maintained for one additional month. No recurrence was observed after discontinuation of treatment. The authors comment on the pathogenicity of the genus Phialemonium.

Entomophthoramycosis by Conidiobolus coronatus. Report of a case successfully treated with the combination of itraconazole and fluconazole

Rhinoentomophthoramycosis caused by Conidiobolus coronatus in a 61-year old woman was unsuccessfully treated during 8 years with all the antifungals available in the Brazilian market, including potassium iodide for 1 month, sulfamethoxazole plus trimethoprim for 2 months, amphotericin B, total dose of 1130 mg, cetoconazole, 400 mg/day for 6 months, fluconazole, 200 mg/day, for at least 2 months and, itraconazole, 400 mg/day for 2 months, followed by 200 mg/day for 4 more months. Complete clinical and mycological cure was achieved using itraconazol 400 mg/day in association with fluconazol 200 mg/day during 24 months. After cure she was submitted to plastic surgery to repair her facial deformation. Today she remains clinically and mycologically cured after 59/60 months (5 years!) without any specific antifungal. We thus suggest the use of the combination of itraconazole and fluconazole as an additional option for the treatment of this mycosis.