Riding a mile in their shoes : understanding Australian metropolitan rail passenger perceptions and experiences of crowdedness using mixed-methods research

Metrics such as passengers per square metre have been developed to define optimum or crowded rail passenger density. Whilst such metrics are important to operational procedures, service evaluation and reporting, they fail to fully capture and convey the ways in which passengers experience crowded situations. This paper reports findings from a two year study of rail passenger crowding in five Australian capital cities which involved a novel mixed-methodology including ethnography, focus groups and an online stated preference choice experiment. The resulting data address the following four fundamental research questions: 1) to what extent are Australian rail passengers concerned by crowding, 2) what conditions exacerbate feelings of crowdedness, 3) what conditions mitigate feelings of crowdedness, and 4) how can we usefully understand passengers’ experiences of crowdedness? It concludes with some observations on the significance and implications of these findings for customer service provision. The findings outlined in this paper demonstrate that the experience of crowdedness (including its tolerance) cannot be understood in isolation from other customer services issues such as interior design, quality of environment, safety and public health concerns. It is hypothesised that tolerance of crowding will increase alongside improvements to overall customer service. This was the first comprehensive study of crowding in the Australian rail industry.

A method for mapping the distribution and density of rabbits and other vertebrate pests in Australia

The European wild rabbit has been considered Australia’s worst vertebrate pest and yet little effort appears to have gone into producing maps of rabbit distribution and density. Mapping the distribution and density of pests is an important step in effective management. A map is essential for estimating the extent of damage caused and for efficiently planning and monitoring the success of pest control operations. This paper describes the use of soil type and point data to prepare a map showing the distribution and density of rabbits in Australia. The potential for the method to be used for mapping other vertebrate pests is explored. The approach used to prepare the map is based on that used for rabbits in Queensland (Berman et al. 1998). An index of rabbit density was determined using the number of Spanish rabbit fleas released per square kilometre for each Soil Map Unit (Atlas of Australian Soils). Spanish rabbit fleas were released into active rabbit warrens at 1606 sites in the early 1990s as an additional vector for myxoma virus and the locations of the releases were recorded using a Global Positioning System (GPS). Releases were predominantly in arid areas but some fleas were released in south east Queensland and the New England Tablelands of New South Wales. The map produced appears to reflect well the distribution and density of rabbits, at least in the areas where Spanish fleas were released. Rabbit pellet counts conducted in 2007 at 54 sites across an area of south east South Australia, south eastern Queensland, and parts of New South Wales (New England Tablelands and south west) in soil Map Units where Spanish fleas were released, provided a preliminary means to ground truth the map. There was a good relationship between mean pellet count score and the index of abundance for soil Map Units. Rabbit pellet counts may allow extension of the map into other parts of Australia where there were no Spanish rabbit fleas released and where there may be no other consistent information on rabbit location and density. The recent Equine Influenza outbreak provided a further test of the value of this mapping method. The distribution and density of domestic horses were mapped to provide estimates of the number of horses in various regions. These estimates were close to the actual numbers of horses subsequently determined from vaccination records and registrations. The soil Map Units are not simply soil types they contain information on landuse and vegetation and the soil classification is relatively localised. These properties make this mapping method useful, not only for rabbits, but also for other species that are not so dependent on soil type for survival.

Competition of sorghum cultivars and densities with Japanese millet (Echinochloa esculenta).

Field studies were conducted at two locations in southern Queensland, Australia during the 2003-2004 and 2004-2005 growing seasons to determine the differential competitiveness of sorghum (Sorghum bicolor L. Moench) cultivars and crop densities against weeds and the sorghum yield loss due to weeds. Weed competition was investigated by growing sorghum in the presence or absence of a model grass weed, Japanese millet (Echinochloa esculenta). The correlation analyses showed that the early growth traits (height, shoot biomass, and daily growth rate of the shoot biomass) of sorghum adversely affected the height, biomass, and seed production of millet, as measured at maturity. "MR Goldrush" and "Bonus MR" were the most competitive cultivars, resulting in reduced weed biomass, weed density, and weed seed production. The density of sorghum also had a significant effect on the crop's ability to compete with millet. When compared to the density of 4.5 plants per m2, sorghum that was planted at 7.5 plants per m2 suppressed the density, biomass, and seed production of millet by 22%, 27% and 38%, respectively. Millet caused a significant yield loss in comparison with the weed-free plots. The combined weed-suppressive effects of the competitive cultivars, such as MR Goldrush, and high crop densities minimized the yield losses from the weeds. These results indicate that sorghum competition against grass weeds can be improved by choosing competitive cultivars and by using a high crop density of > 7.5 plants per m2. These non-chemical options should be included in an integrated weed management program for better weed management, particularly where the control options are limited by the evolution of herbicide resistance.

Effects of light conditions and plant density on growth and reproductive biology of Cascabela thevetia (L.) Lippold

Cascabela thevetia (L.) Lippold (Apocynaceae) is an invasive woody weed that has formed large infestations at several locations in northern Australia. Understanding the reproductive biology of C. thevetia is vital to its management. This paper reports results of a shade house experiment that determined the effects of light conditions (100% or 30% of natural light) and plant densities (one, two, four or eight plants per plot) on the growth, time to flowering and seed formation, and monthly pod production of two C. thevetia biotypes (peach and yellow). Shaded plants were significantly larger when they reached reproductive maturity than plants grown under natural light. However, plants grown under natural light flowered earlier (268 days compared with 369 days) and produced 488 more pods per pot (a 5-fold increase) over 3 years. The yellow biotype was slightly taller at reproductive maturity but significantly taller and with significantly greater aboveground biomass at the end of the study. Both biotypes flowered at a similar time under natural light and low plant densities but the yellow biotype was quicker to seed (478 versus 498 days), produced significantly more pods (364 versus 203 pods) and more shoot growth (577 g versus 550 g) than the peach biotype over 3 years. Higher densities of C. thevetia tended to significantly reduce the shoot and root growth by 981 g and 714 g per plant across all light conditions and biotypes over 3 years and increase the time taken to flower by 140 days and produce seeds by 184 days. For land managers trying to prevent establishment of C. thevetia or to control seedling regrowth once initial infestations have been treated, this study indicates that young plants have the potential to flower and produce seeds within 268 and 353 days, respectively. However, with plant growth and reproduction most likely to be slower under field conditions, annual surveillance and control activities should be sufficient to find and treat plants before they produce seeds and replenish soil seed banks. The most at-risk part of the landscape may be open areas that receive maximum sunlight, particularly within riparian habitats where plants would consistently have more favourable soil moisture conditions.

Water addition, evaporation and water holding capacity of poultry litter

Litter moisture content has been related to ammonia, dust and odour emissions as well as bird health and welfare. Improved understanding of the water holding properties of poultry litter as well as water additions to litter and evaporation from litter will contribute to improved litter moisture management during the meat chicken grow-out. The purpose of this paper is to demonstrate how management and environmental conditions over the course of a grow-out affect the volume of water A) applied to litter, B) able to be stored in litter, and C) evaporated from litter on a daily basis. The same unit of measurement has been used to enable direct comparison—litres of water per square metre of poultry shed floor area, L/m2, assuming a litter depth of 5 cm. An equation was developed to estimate the amount of water added to litter from bird excretion and drinking spillage, which are sources of regular water application to the litter. Using this equation showed that water applied to litter from these sources changes over the course of a grow-out, and can be as much as 3.2 L/m2/day. Over a 56 day grow-out, the total quantity of water added to the litter was estimated to be 104 L/m2. Litter porosity, water holding capacity and water evaporation rates from litter were measured experimentally. Litter porosity decreased and water holding capacity increased over the course of a grow-out due to manure addition. Water evaporation rates at 25 °C and 50% relative humidity ranged from 0.5 to 10 L/m2/day. Evaporation rates increased with litter moisture content and air speed. Maintaining dry litter at the peak of a grow-out is likely to be challenging because evaporation rates from dry litter may be insufficient to remove the quantity of water added to the litter on a daily basis.

Bactrocera frauenfeldi (Diptera: Tephritidae), an invasive fruit fly in Australia that may have reached the extent of its spread due to environmental variables

Bactrocera frauenfeldi (Schiner), the ‘mango fruit fly’, is a horticultural pest originating from the Papua New Guinea region. It was first detected in Australia on Cape York Peninsula in north Queensland in 1974 and had spread to Cairns by 1994 and Townsville by 1997. Bactrocera frauenfeldi has not been recorded further south since then despite its invasive potential, an absence of any controls and an abundance of hosts in southern areas. Analysis of cue-lure trapping data from 1997 to 2012 in relation to environmental variables shows that the distribution of B. frauenfeldi in Queensland correlates to locations with a minimum temperature for the coldest month >13.2°C, annual temperature range <19.3°C, mean temperature of the driest quarter >20.2°C, precipitation of the wettest month >268 mm, precipitation of the wettest quarter >697 mm, temperature seasonality <30.9°C (i.e. lower temperature variability) and areas with higher human population per square kilometre. Annual temperature range was the most important variable in predicting this species' distribution. Predictive distribution maps based on an uncorrelated subset of these variables reasonably reflected the current distribution of this species in northern Australia and predicted other areas in the world potentially at risk from invasion by this species. This analysis shows that the distribution of B. frauenfeldi in Australia is correlated to certain environmental variables that have most likely limited this species' spread southward in Queensland. This is of importance to Australian horticulture in demonstrating that B. frauenfeldi is unlikely to establish in horticultural production areas further south than Townsville.

Polybridge Technical Report

This study examined the physical and chemical properties of a novel, fully-recirculated prawn and polychaete production system that incorporated polychaete-assisted sand filters (PASF). The aims were to assess and demonstrate the potential of this system for industrialisation, and to provide optimisations for wastewater treatment by PASF. Two successive seasons were studied at commercially-relevant scales in a prototype system constructed at the Bribie Island Research Centre in Southeast Queensland. The project produced over 5.4 tonnes of high quality black tiger prawns at rates up to 9.9 tonnes per hectare, with feed conversion of up to 1.1. Additionally, the project produced about 930 kg of high value polychaete biomass at rates up to 1.5 kg per square metre of PASF, with the worms feeding predominantly on waste nutrients. Importantly, this closed production system demonstrated rapid growth of healthy prawns at commercially relevant production levels, using methods that appear feasible for application at large scale. Deeper (23 cm) PASF beds provided similar but more reliable wastewater treatment efficacies compared with shallower (13 cm) beds, but did not demonstrate significantly greater polychaete productivity than (easier to harvest) shallow beds. The nutrient dynamics associated with seasonal and tidal operations of the system were studied in detail, providing technical and practical insights into how PASF could be optimised for the mitigation of nutrient discharge. The study also highlighted some of the other important advantages of this integrated system, including low sludge production, no water discharge during the culture phase, high ecosystem health, good prospects for biosecurity controls, and the sustainable production of a fishery-limited resource (polychaetes) that may be essential for the expansion of prawn farming industries throughout the world. Regarding nutrient discharge from this prototype mariculture system, when PASF was operating correctly it proved feasible to have no water (or nutrient) discharge during the entire prawn growing season. However, the final drain harvest and emptying of ponds that is necessary at the end of the prawn farming season released 58.4 kg ha-1 of nitrogen and 6 kg ha-1 of phosphorus (in Season 2). Whilst this is well below (i.e., one-third to one-half of) the current load-based licencing conditions for many prawn farms in Australia, the levels of nitrogen and chlorophyll a in the ponds remained higher than the more-stringent maximum limits at the Bribie Island study site. Zero-net-nutrient discharge was not achieved, but waste nutrients were low where 5.91 kg of nitrogen and 0.61 kg of phosphorus was discharged per tonne of prawns produced. This was from a system that deployed PASF at 14.4% of total ponded farm area which treated an average of 5.8% of pond water daily and did not use settlement ponds or other natural or artificial water remediation systems. Four supplemental appendices complement this research by studying several additional aspects that are central to the industrialisation of PASF. The first details an economic model and decision tool which allows potential users to interactively assess construction and operational variables of PASF at different scales. The second provides the qualitative results of a prawn maturation trial conducted collaboratively with the Commonwealth Scientific and Industrial Research Organisation (CSIRO) to assess dietary inclusions of PASF-produced worms. The third provides the reproductive results from industry-based assessments of prawn broodstock produced using PASF. And the fourth appendix provides detailed elemental and nutritional analyses of bacterial biofilm produced by PASF and assesses its potential to improve the growth of prawns in recirculated culture systems.

Recent Advances in Low CTE and High Density System-on-a-Package (SOP) Substrate with Thin Film Component Integration

The Packaging Research Center has been developing next generation system-on-a-package (SOP) technology with digital, RF, optical, and sensor functions integrated in a single package/module. The goal of this effort is to develop a platform substrate technology providing very high wiring density and embedded thin film passive and active components using PWB compatible materials and processes. The latest SOP baseline process test vehicle has been fabricated on novel Si-matched CTE, high modulus C-SiC composite core substrates using 10mum thick BCB dielectric films with loss tangent of 0.0008 and dielectric constant of 2.65. A semi-additive plating process has been developed for multilayer microvia build-up using BCB without the use of any vacuum deposition or polishing/CMP processes. PWB and package substrate compatible processes such as plasma surface treatment/desmear and electroless/electrolytic pulse reverse plating was used. The smallest line width and space demonstrated in this paper is 6mum with microvia diameters in the 15-30mum range. This build-up process has also been developed on medium CTE organic laminates including MCL-E-679F from Hitachi Chemical and PTFE laminates with Cu-Invar-Cu core. Embedded decoupling capacitors with capacitance density of >500nF/cm2 have been integrated into the build-up layers using sol-gel synthesized BaTiO3 thin films (200-300nm film thickness) deposited on copper foils and integrated using vacuum lamination and subtractive etch processes. Thin metal alloy resistor films have been integrated into the SOP substrate using two methods: (a) NiCrAlSi thin films (25ohms per square) deposited on copper foils (Gould Electronics) laminated on the build-up layers and two step etch process for resistor definition, and (b) electroless plated Ni-W-P thin films (70 ohms to few Kohms per square) on the BCB dielectric by plasma surface treatment and activation. The electrical design and build-up layer structure along- - with key materials and processes used in the fabrication of the SOP4 test vehicle were presented in this paper. Initial results from the high density wiring and embedded thin film components were also presented. The focus of this paper is on integration of materials, processes and structures in a single package substrate for system-on-a-package (SOP) implementation

Flood of September 20-23, 1969 in the Gadsden County area, Florida

The center of low pressure of a tropical disturbance which moved northward in the Gulf of Mexico, reached land between Panama City and Port St. Joe, Florida, on September 20, 1969. This system was nearly stationary for 48 hours producing heavy rainfall in the Quincy-Havana area, 70-80 miles northeast of the center. Rainfall associated with the tropical disturbance exceeded 20 inches over a part of Gadsden County, Florida, during September 20 through 23, 1969, and the maximum rainfall of record occurred at Quincy with 10.87 inches during a 6-hour period on September 21. The 48-hour maximum of 17.71 inches exceeded the 1 in 100-year probability of 16 inches for a 7-day period. The previous maximum rainfall of record at Quincy (more than 12 inches) was on September 14-15, 1924. The characteristics of this historical storm were similar in path and effect to the September 1969 tropical disturbance. Peak runoff from a 1.4-square mile area near Midway, Florida, was 1,540 cfs (cubic feet per second) per square mile. A peak discharge of 45,600 cfs on September 22 at the gaging station on the Little River near Quincy exceeded the previous peak of 25,400 cfs which occurred on December 4, 1964. The peak discharge of 89,400 cfs at Ochlockonee River near Bloxham exceeded the April 1948 peak of 50,200 cfs, which was the previous maximum of record, by 1.8 times. Many flood-measurement sites had peak discharges in excess of that of a 50-year flood. Nearly $200,000 was spent on emergency repairs to roads. An additional $520,000 in contractual work was required to replace four bridges that were destroyed. Agricultural losses were estimated at $1,000,000. (44 page document)

Improved fisheries technologies and approaches for their dissemination: a case study of Niger State

Technology generation and dissemination are important components of rural transformation programmes. Nigerian fisheries sub-sector is still hampered by low productivity (especially in aquaculture) and low output (capture fisheries and post-harvest technologies). Research institutions and the Universities have made efforts in developing improved technologies to find solution to these problems, yet the level of adoption of the technologies remain low. This is due to a combination of various factors among which are faulty agricultural policies; institutional framework and unfavourable socio-economic environment. Niger State plays an important role in production in Nigeria and host the only research institute with the mandate in inland fisheries. It is important therefore to know the effectiveness of various extension approaches used in disseminating the technologies developed and their impact on adopters. Forty fishers were randomly selected in Shiroro L.G.A. of the Niger State and interviewed. The study probed into their socio-economic characteristics, traditional practices, extent of awareness and adoption for fisheries technologies and the effectiveness and impact of various approaches used by the extension organizations to disseminate the technologies. The results show that the economically active age group of the fishers was in the range of 20-50 years (87.5%). Males (95%) dominate the fisher population. 47.5% of the respondents have average household size of 6-10 and 57.5% were below primary school in educational attainment. Only 57.5% belonged to cooperative societies, while 90.0% of the fishers have no access to credit other than personal finance. Majority of fish-farmers (60%) operate at homestead level with pond size less than 50 square meter, stock under polyculture fishing methods are at subsistence level, while 67.5% of processors use mud-oven to cure, by smoking, freshly caught fish. Disseminated aquaculture technologies have low level of awareness (5-20%) and adoption (2.5-22.5%). For capture fisheries and post-harvest technologies awareness levels of 47.5-72.5% and adoption levels of 27.5-50.0% were recorded. Method demonstration (87.5%), result demonstration (75.0%) and field days (47.5%) are the major approaches used by the ADP. Respondents were of the opinion that method demonstration (65%), result demonstration (57.5%) and field day (30.0%) are effective. 62.5% of respondents had enhanced income due impact of extension activities

Encouraging sustainable development in a coastal community: New Hanover County, North Carolina's exceptional design zoning district

While New Hanover County is the second smallest county in North Carolina, it is also the second most densely populated with approximately 850 people per square mile. Nestled between the Cape Fear River and Atlantic Ocean with surrounding barrier island beach communities, the County’s geographic location provides a prime vacation destination, as well as an ideal location for residents who wish to live at the water’s edge. Wilmington is the largest city in the County with a population just under 200,000. Most of the Wilmington metropolitan area is developed, creating intense development pressures for the remaining undeveloped land in the unincorporated County. In order to provide development opportunities for mixed use or high density projects within unincorporated New Hanover County where appropriate urban features are in place to support such projects without the negative effects of urban sprawl, County Planning Staff recently developed an Exceptional Design Zoning District (EDZD). Largely based on the LEED for Neighborhood Development program, the EDZD standards were scaled to fit the unique conditions of the County with the goal of encouraging sustainable development while providing density incentives to entice the use of the voluntary district. The incentive for the voluntary zoning district is increased density in areas where the density may not be allowed under normal circumstances. The rationale behind allowing for higher density projects is that development can be concentrated in areas where appropriate urban features are in place to support such projects, and the tendency toward urban sprawl can be minimized. With water quality being of high importance, it is perceived that higher density development will better protect water quality then lower density projects. (PDF contains 4 pages)

Design of a timber Howe truss highway bridge

The span of the bridge was assumed as 100 feet. The type of bridge used is the timber Howe Truss. The height of truss was taken as 20 feet between center lines of top and bottom chords. The width was taken as 18 feet center to center of trusses. The truss was divided up into five panels 20 feet long.

It was designed according to the "General Specifications for Steel Highway Bridges" by Ketchum. For the live load for the floor and its supports, a load of 80 pounds per square foot of total floor surface or a 15 ton traction engine with axles 10 feet centers and 6 feet gage, two thirds of load to be carried by rear axles.

For the truss a load of 75 pounds per square foot of floor surface.

For the wind load the bottom lateral bracing is to be designed to resist a lateral wind load of 300 pounds per foot of span; 150 pounds of this to be treated as a moving load.

The top lateral bracing is to be designed to resist a lateral wind force of 150 pounds per foot of span.

The timber to be used in the bridge is to be Douglas fir.

The unit stresses used for timber are those of the American Railway Engineering Association.

Micropropagação e avaliação da potencialidade genotóxica de Petiveria alliacea L.

Petiveria alliacea L. é uma planta pertencente à família Phytolaccaceae, conhecida popularmente no país como guiné, erva-de-alho, erva-tipi ou amansa-senhor. Nativa da Região Amazônica tem sido cultivada em muitas áreas tropicais com propósito medicinal ou ritualístico. O objetivo desse trabalho foi (i) o desenvolvimento e a multiplicação de plantas de P. alliacea L. através de métodos de cultura de tecidos, e monitoramento fitoquímico das culturas, e (ii) avaliação comparativa das potencialidades genotóxica e antigenotóxica entre plantas coletadas no campo e produzidas in vitro. Exemplares de diferentes populações ocorrentes no estado do Rio de Janeiro foram utilizados como matrizes para a cultura. Foi estabelecido um protocolo para multiplicação das plantas em meio MS suplementado com BAP e ANA em diferentes concentrações e combinações, que forneceu como melhor resultado em média 8 plantas por explante na concentração de BAP 4,4 μM + ANA 0,54 μM. A análise fitoquímica foi baseada em métodos cromatográficos de diferentes extratos de plantas de campo e plantas in vitro das populações estudadas resultando em diferentes substâncias identificadas nas amostras analisadas por cromatografia em camada delgada. Os extratos foram também avaliados por cromatografia gasosa acoplada á espectrometria de massas, sendo identificadas diferentes substâncias, entre as quais o dibenzil dissulfeto, um produto de degradação de tiosulfinatos com importantes atividades biológicas na defesa das plantas. Os extratos aquosos das plantas de campo e daquelas estabelecidas in vitro foram submetidos à avaliação da potencialidade genotóxica e antigenotóxica, usando-se como modelo o DNA plasmidial pUC 9.1. Os resultados demonstraram que as concentrações utilizadas do extrato aquoso foram capazes de induzir alterações na conformação estrutural do DNA, indicando a ocorrência de quebras simples e duplas nesta molécula. Observou-se também que as lesões aumentaram, proporcionalmente ao aumento da concentração dos extratos, caracterizando-se, assim, um efeito dose-resposta. Os dados também apontaram para um efeito protetor do extrato aquoso, em relação aos danos oxidativos causados pelo cloreto estanoso, indicando, também, uma potencialidade antigenotóxica do extrato aquoso.

Mono- and polyculture of silver barb (Puntius gonionotus) in deepwater rice systems in Bangladesh

Experiments with fish enclosures were conducted at the Deepwater Rice Farming Systems Research Site at Shuvullah, Mirzapur, Bangladesh. The objective was to study the performance of silver barb (Puntius gonionotus) called Thai sharputi or rajputi in Bangladesh in mono-and-polyculture with grass carp (Ctenopharyngodon idella), common carp (Cyprinus carpio), catla (Catla catla) and rohu (Labeo rohita). Each enclosure measured 21 m x 21 m with an approximate net height of 3.5 m. The stocking densities per cubic meter were 1 fingerling for Thai sharputi monoculture (enclosure 1), and 2 fingerlings for the polyculture systems (enclosure 2 and 3). The species ratio for enclosure 2 was 0.37:0.27:0.02:0.34 (grass carp:Thai sharputi:common carp:catla) and for enclosure 3, 0.4:0.4:0.2 (catla:rohu:Thai sharputi). In monoculture (enclosure 1), Thai sharputi performed well. This relatively good production was mainly attributed to the use of appropriately sized fingerlings and rapid growth from consumption of an abundant supply of azolla in addition to feed given. For the polyculture in enclosure 2, the average weight gain of common carp was the highest (673 g) followed by grass carp (475 g) and Thai sharputi (286 g). For the polyculture in enclosure 3, the length and weight gains for Thai sharputi were almost the same as for the monoculture.

Development of low cost feed using local ingredients for culture of freshwater prawn, Macrobrachium rosenbergii in ponds

Two experiments were conducted to formulate and evaluate test diets using locally available ingredients to find out suitable diets for mono and polyculture of Macrobrachium rosenbergii in ponds. The first experiment was conducted from 1 July 2003 to 29 September 2003 in 12 experimental ponds each measuring 30 square meters behind the Fisheries Faculty Building, BAU campus, Mymensingh. Three experimental diets containing 30% protein were formulated using fish meal, meat and bone meal, mustard oilcake, sesame meal and rice bran and assigned to treatments 1, 2 and 3, respectively. A special shrimp feed (Starter-II) from Saudi-Bangla Fish Feed Ltd. was assigned to treatment 4 (Control). Each treatment had three replications. Juveniles of M. rosenbergii (2.90±0.81g) were stocked at the rate of 4/square meter. Prawns were fed three times daily at the rate of 15% of their body weight at the beginning, which was gradually reduced to 10% and 5% for the last two months. There was no significant (P>0.05) difference between the weight gains of prawns fed diets 1 and 4 (control), but they were significantly (P<0.05) higher than those of diets 2 and 3. The FCR values of diets ranged between 2.61 to 3.36 with diets 1 and 4 showing significantly (P<0.05) lower FCR values. The survival rate of prawns ranged between 68 to 78% with prawns fed diets 1 and 4 showing significantly higher survival rate. The production of prawn ranged from 921 to 1,428 kg/ha/90 days and diet 1 gave the highest production. Treatment 1 gave the highest net profit ofTk. 161,980/ha/90 days. The second experiment was conducted from December, 2003 to April, 2004 to see the growth of over wintered M. rosenbergii juveniles in polyculture with indigenous major carps (catla and rohu) in ponds using formulated diets. Three isoenergetic experimental diets formulated using fish meal, meat and bone meal, mustard oil cake, rice bran, wheat bran and molasses, and a shrimp feed 'Golda special feed' from Saudi-Bangla Fish Feed Ltd. were assigned to treatments 1, 2, 3 and 4 (control), respectively, each treatment had two replications. Eight experimental ponds each measuring 80 square meters in the Field Laboratory Complex of the Faculty of Fisheries, BAU campus, Mymensingh were used. The mean initial weights of M. rosenbergii, catla and rohu were 1.60±0.01, 30.0±0.09 and 25.0±0.08 g, respectively. A total of 160 fish and prawn (20,000/ha) were stocked in each pond at the ratio of 2:1:1 (prawn: catla: rohu). Fish were fed at the rate of 3-5% of their body weight. Prawns fed diet 1, 2 and 4 showed higher weight gains compared to diet 3. The weight gain of catla was significantly higher in T1 while in case of rohu was higher in T1 and T4, respectively. There were no significant differences (P>0.05) in the survival rate of fish as obtained from different treatments. The overall total fish production ranged from 2196 to 2679 kg/ha/5 months. The highest production and the highest profit (Tk. 56,531/ha/5 months) was obtained from T1 and the lowest (Tk. 24,932/ha/5 months) from T4.