Metal oxide nanofibres membranes assembled by spin-coating method

Ceramic membranes are of particular interest in many industrial processes due to their ability to function under extreme conditions while maintaining their chemical and thermal stability. Major structural deficiencies under conventional fabrication approach are pin-holes and cracks, and the dramatic losses of flux when pore sizes are reduced to enhance selectivity. We overcome these structural deficiencies by constructing hierarchically structured separation layer on a porous substrate using larger titanate nanofibres and smaller boehmite nanofibres. This yields a radical change in membrane texture. The differences in the porous supports have no substantial influences on the texture of resulting membranes. The membranes with top layer of nanofibres coated on different porous supports by spin-coating method have similar size of the filtration pores, which is in a range of 10–100 nm. These membranes are able to effectively filter out species larger than 60 nm at flow rates orders of magnitude greater than conventional membranes. The retention can attain more than 95%, while maintaining a high flux rate about 900 L m-2 h. The calcination after spin-coating creates solid linkages between the fibres and between fibres and substrate, in addition to convert boehmite into -alumina nanofibres. This reveals a new direction in membrane fabrication.

Chemical and thermal properties of fractionated bagasse soda lignin

A major challenge of the 21st century will be to generate transportation fuels using feedstocks such as lignocellulosic waste materials as a substitute for existing fossil and nuclear fuels. The advantages of lignocellulosics as a feedstock material are that they are abundant, sustainable and carbon-neutral. To improve the economics of producing liquid transportation fuels from lignocellulosic biomass, the development of value-added products from lignin, a major component of lignocellulosics, is necessary. Lignins produced from black liquor through the fractionation of sugarcane bagasse with soda and organic solvents have been characterised by physical, chemical and thermal means. The soda lignin fractions have different physico-chemical and thermal properties from one another. Some of these properties have been compared to bagasse lignin extracted with aqueous ethanol.

Non-covalent surface modification of boron nitride nanotubes for enhanced catalysis

Boron nitride nanotubes were functionalized by microperoxidase-11 in aqueous media, showing improved catalytic performance due to a strong electron coupling 10 between the active centre of microperoxidase-11 and boron nitride nanotubes. One main application challenge of enzymes as biocatalysts is molecular aggregation in the aqueous solution. This issue is addressed by immobilization of enzymes on solid supports which 15 can enhance enzyme stability and facilitate separation, and recovery for reuse while maintaining catalytic activity and selectivity. The protein-nanoparticle interactions play a key role in bio-nanotechnology and emerge with the development of nanoparticle-protein “corona”. Bio-molecular coronas provide a 20 unique biological identity of nanosized materials.1, 2 As a structural analogue to carbon nanotubes (CNTs), Boron nitride nanotubes have boron and nitrogen atoms distributed equally in hexagonal rings and exhibit excellent mechanical strength, unique physical properties, and chemical stability at high-temperatures. 25 The chemical inertness of BN materials suits to work in hazardous environments, making them an optimal candidate in practical applications in biological and medical field.3, 4

Stability of Fe3+ -VO defect pairs in polycrystalline Pb(Ti,Zr)O3

The intensity of the EPR signal with g = 5.985 arising from a ferric ion â oxygen vacancy defect pair (Fe3+ â VO) in PbTiO3, varies with the extent of PbO nonstoichiometry at constant Fe3+ content due to an increased oxygen vacancy concentration. In PZT solid solutions, the signal intensity decreases with an increase in Zr. A lower intensity is also noticed for Fe3+ â VO signals in PbZrO3. This behaviour is explained on the basis of PbO nonstoichiometry arising from independent Pb- and O-vacancies as well as the randomly distributed crystallographic shear (CS) plane defects. The contribution to PbO nonstoichiometry from CS planes is larger in high zirconium compositions of PZT.

Complex permittivity measurements of RF plasma polymerized polyterpenol organic thin films employing split post dielectric resonator

In the fields of organic electronics and biotechnology, applications for organic polymer thin films fabricated using low-temperature non-equilibrium plasma techniques are gaining significant attention because of the physical and chemical stability of thin films and the low cost of production. Polymer thin films were fabricated from non-synthetic terpinen-4-ol using radiofrequency polymerization (13.56 MHz) on low loss dielectric substrates and their permittivity properties were ascertained to determine potential applications for these organic films. Real and imaginary parts of permittivity as a function of frequency were measured using the variable angle spectroscopic ellipsometer. The real part of permittivity (k) was found to be between 2.34 and 2.65 in the wavelength region of 400–1100 nm, indicating a potential low-k material. These permittivity values were confirmed at microwave frequencies. Dielectric properties of polyterpenol films were measured by means of split post dielectric resonators (SPDRs) operating at frequencies of 10 GHz and 20 GHz. Permittivity increased for samples deposited at higher RF energy – from 2.65 (25 W) to 2.83 (75 W) measured by a 20-GHz SPDR and from 2.32 (25 W) to 2.53 (100 W) obtained using a 10-GHz SPDR. The error in permittivity measurement was predominantly attributed to the uncertainty in film thickness measurement.

Biocompatible Bacterial Cellulose-Poly(2-hydroxyethyl methacrylate) Nanocomposite Films

A series of bacterial cellulose-poly(2-hydroxyethyl methacrylate) nanocomposite films was prepared by in situ radical polymerization of 2-hydroxyethyl methacrylate (HEMA), using variable amounts of poly(ethylene glycol) diacrylate (PEGDA) as crosslinker. Thin films were obtained, and their physical, chemical, thermal, and mechanical properties were evaluated. The films showed improved translucency compared to BC and enhanced thermal stability and mechanical performance when compared to poly(2-hydroxyethyl methacrylate) (PHEMA). Finally, BC/PHEMA nanocomposites proved to be nontoxic to human adipose-derived mesenchymal stem cells (ADSCs) and thus are pointed as potential dry dressings for biomedical applications.

Propiedades básicas de materiales soporte y parámetros de control en biofiltración.

[ES]En la problemática medioambiental generada por la contaminación atmosférica hay tres aspectos que marcan las directrices de actuación institucional: la presión social, la legislación vigente y la tecnología disponible. En cuanto a este último aspecto, la biofiltración es una tecnología eficaz, asequible y sostenible basada en la actividad biodegradadora de microorganismos específicos adheridos a la superficie de un material soporte que constituye el lecho del biofiltro. La elección de un material soporte adecuado es de especial importancia para asegurar el correcto funcionamiento de los biofiltros. Esta decisión está basada en las propiedades intrínsecas del material que deben ser analizadas previamente a su uso. En este proyecto se ha seleccionado cuales son estas propiedades básicas a partir de una revisión bibliográfica, destacando la capacidad de retención de humedad, superficie específica, porosidad, y estabilidad física y química del material. En este trabajo, también se han fijado los parámetros de control que deben ser medidos de forma rutinaria en un biofiltro para asegurar la eficacia del tratamiento de descontaminación. En base a la información bibliográfica recopilada, se ha concluido que los parámetros básicos son pH, temperatura, contenido de humedad del lecho y pérdidas de carga. A nivel experimental, se han medido las pérdidas de carga generadas en biofiltros empacados con tres materiales soportes que son de especial interés para una investigación posterior a desarrollar por el grupo Biofiltración de la Universidad del País Vasco (UPV/EHU). Durante el período de arranque inicial de los tres biofiltros, las pérdidas de carga medidas fueron muy bajas en los tres casos, aunque algo superiores cuando la alimentación era en sentido ascendente frente al flujo descendente. Sin embargo, cuando se midieron las pérdidas de carga bajo condiciones de encharcamiento del lecho, que es una de las situaciones más problemáticas en un biofiltro, todos los soportes presentaron un aumento puntual de la pérdida de carga aunque la tendencia en los días posteriores fue claramente descendente, recuperando valores de operación habituales. La comparativa del comportamiento frente a las pérdidas de carga permitió seleccionar el soporte más idóneo de los tres analizados, aunque los otros dos podrían ser alternativas viables en caso de sustitución.

Investigation into the factors associated with poor water quality in intensively cultured prawn ponds

Water quality problems are reported to be the factor limiting prawn production in the local prawn farm. This investigation was carried out to monitor water quality and its relationship to physical, chemical and biological conditions in the ponds in order to establish what factors should be monitored in order to predict problems. Pond collapse was found to be associated with high concentrations of ammonium, high pH and blue-green algae dominated phytoplankton populations. There was no easy means of predicting the imminent collapse of ponds as the phenomenon was never associated with the extreme of any of the conditions monitored. Rather it seemed to be related to the stability of the pond's algal population, which was largely unaccounted for. Recommendations toward improving water quality are proposed.

Caracterização do estado trófico e da qualidade da água de um sistema lagunar costeiro urbano: estudo de caso da Lagoa Rodrigo de Freitas, RJ.

O estudo da dinâmica dos parâmetros físicos, químicos e biológicos da água em lagoas costeiras é essencial para entender o funcionamento destes ecossistemas; o que por sua vez permite o desenvolvimento de estratégias adequadas de gerenciamento e conservação de seus recursos. Neste estudo, analisou-se a qualidade da água da Lagoa Rodrigo de Freitas (Rio de Janeiro/RJ) e dos seus principais tributários. Foram utilizados os dados oriundos do projeto de monitoramento da qualidade da água realizado pela SMAC/RJ, entre dezembro de 2011 e dezembro de 2012. O objetivo precípuo foi compreender a dinâmica espacial e temporal da variação do estado trófico e da qualidade da água, assim como avaliar a exequibilidade e aplicabilidade de índices multimétricos (IQA, IET, ICE, IC, TRIX) ao projeto de monitoramento ambiental da LRF. Para tanto, foram realizadas coletas mensais e semanais da água superficial em cinco pontos amostrais, na LRF, e cinco pontos nos rios/canais. Em seguida, análises físico-químicas e biológicas foram realizadas. Os resultados obtidos mostraram relativa homogeneidade espacial e elevada variação sazonal da qualidade da água superficial. Os índices aplicados aos dados indicaram uma variação temporal representativa do estado trófico e da qualidade da água, sendo as classificações para os rios e canais diferentes às verificadas na LRF. Esta apresentou variação entre supereutrófica e hipereutrófica, já os primeiros foram mesotróficos. A qualidade da água da LRF apresentou majoritariamente entre moderada a boa. Os rios e canais foram classificados ruins e médios. Concluiu-se que diferentes modelos podem resultar em diferentes classificações de níveis de trofia e qualidade da água. Análises estatísticas de tendência indicaram estabilidade da qualidade da água, sem uma projeção representativa de melhoria da qualidade hídrica. Já análises multivariadas (RDA, PCA BEST, SIMPER, ANOSIM, MDS e CLUSTER) mostraram um elevado dinamismo da comunidade fitoplanctônica com nítida resposta às oscilações de variáveis físico-químicas específicas, apesar da dominância recorrente por cianobactérias.

Avaliação da influência do manejo agrícola no uso e cobertura das terras através de ferramentas de geoprocessamento e indicadores de qualidade dos solos na bacia hidrográfica do Córrego da Caçada - Paraty/RJ

A avaliação da qualidade dos solos e a redução da Mata Atlântica tem sido alvo de diversas pesquisas no Brasil e no mundo, principalmente quando estes estão atrelados ao recorte espacial de Unidades de Conservação. No entanto, tem sido difícil para os gestores dessas unidades a avaliação dos impactos ambientais gerados ao longo dos anos nas bacias hidrográficas, principalmente pela falta de investimentos. Esta dissertação teve por objetivo geral avaliar o atual estágio de degradação da bacia hidrográfica do Córrego da Caçada pertencente à Área de Proteção Ambiental Federal de Cairuçu, no município de Paraty RJ, analisando quantitativamente e qualitativamente a redução dos fragmentos de Mata Atlântica e estabelecendo relações com a degradação física e química dos solos dentro e fora dos fragmentos florestais. A metodologia utilizada para a redução ou avanço dos fragmentos de Mata Atlântica baseou-se no uso de fotografias aéreas do ano de 1956 e imagens de satélite de 2012, onde possibilitou a avaliação espaço-temporal do uso e cobertura das terras, através da produção de um mapa temático final. Além disso, foram elaborados mapas temáticos de reconhecimento da área de estudo, como o de hipsometria, de declividade, de orientação e forma das encostas, além da geração de perfis topográficos. Para a avaliação da qualidade física, química e biológica dos solos foram determinadas as curvas de distribuição granulométrica, a densidade relativa dos grãos sólidos e a densidade aparente, porosidade total, os limites de liquidez e plasticidade, a estabilidade dos agregados em água, análises morfológicas, a saturação de bases, a capacidade de troca catiônica (CTC), a saturação por alumínio, fósforo, pH e o carbono orgânico. Para tal, foi realizada a abertura de três perfis, sendo um em área de fragmento florestal e dois em áreas de pasto. O resultado das análises permitiu, segundo a Sociedade Brasileira de Ciência do solo, a classificação de dois tipos de solos na bacia, sendo: Cambissolo Háplico Tb Distrófico Típico em área fragmento florestal e em área de pasto, e um Latossolo Amarelo Tb Distrófico Típico em área de pasto. Os resultados de laboratório mostraram que os solos avaliados têm baixa fertilidade e valores variados nos resultados de física do solo. No entanto, além do histórico de uso do solo caracterizado pelas práticas rudimentares do manejo empregado pelos Caiçaras, o clima predominante na região possibilita um regime pluviométrico anual que passa dos 2.000mm de chuva/ano, caracterizando solos muito lixiviados e pobres quimicamente. Portanto, conclui-se que a relação das propriedades físicas e químicas avaliadas junto ao manejo inadequado ao longo dos anos tem apresentado um cenário de grandes dificuldades para a recuperação florestal na bacia hidrográfica do Córrego da Caçada, o que mostra a importância da avaliação dos impactos ambientais não só pelo recorte de bacias hidrográficas, como contextualizar seu posicionamento dentro de Unidades de Conservação, com legislações e objetivos específicos.

A critical review of Glucose biosensors based on Carbon nanomaterials: Carbon nanotubes and graphene

There has been an explosion of research into the physical and chemical properties of carbon-based nanomaterials, since the discovery of carbon nanotubes (CNTs) by Iijima in 1991. Carbon nanomaterials offer unique advantages in several areas, like high surface-volume ratio, high electrical conductivity, chemical stability and strong mechanical strength, and are thus frequently being incorporated into sensing elements. Carbon nanomaterial-based sensors generally have higher sensitivities and a lower detection limit than conventional ones. In this review, a brief history of glucose biosensors is firstly presented. The carbon nanotube and grapheme-based biosensors, are introduced in Sections 3 and 4, respectively, which cover synthesis methods, up-to-date sensing approaches and nonenzymatic hybrid sensors. Finally, we briefly outline the current status and future direction for carbon nanomaterials to be used in the sensing area. © 2012 by the authors; licensee MDPI, Basel, Switzerland.

Carbon nanostructure-based field-effect transistors for label-free chemical/biological sensors.

Over the past decade, electrical detection of chemical and biological species using novel nanostructure-based devices has attracted significant attention for chemical, genomics, biomedical diagnostics, and drug discovery applications. The use of nanostructured devices in chemical/biological sensors in place of conventional sensing technologies has advantages of high sensitivity, low decreased energy consumption and potentially highly miniaturized integration. Owing to their particular structure, excellent electrical properties and high chemical stability, carbon nanotube and graphene based electrical devices have been widely developed for high performance label-free chemical/biological sensors. Here, we review the latest developments of carbon nanostructure-based transistor sensors in ultrasensitive detection of chemical/biological entities, such as poisonous gases, nucleic acids, proteins and cells.

Advanced carbon nanotubes and carbon nanotube fibers for biosensing applications

Since the discovery of Carbon Nanotubes (CNTs) by Iijima in 1991[1, 2], there has been an explosion of research into the physical and chemical properties of this novel material. CNT based biosensors can play an important role in amperometric, immunosensor and nucleic-acid sensing devices, e.g. for detection of life threatening biological agents in time of war or in terrorist attacks, saving life and money for the NHS. CNTs offer unique advantages in several areas, like high surfacevolume ratio, high electrical conductivity, chemical stability and strong mechanical strength, and CNT based sensors generally have higher sensitivities and lower detection limit than conventional ones. In this review, recent advances in biosensors utilising carbon nanotubes and carbon nanotube fibres will be discussed. The synthesis methods, nanostructure approaches and current developments in biosensors using CNTs will be introduced in the first part. In the second part, the synthesis methods and up-to-date progress in CNT fibre biosensors will be reviewed. Finally, we briefly outline some exciting applications for CNT and CNT fibres which are being targeted. By harnessing the continual advancements in micro and nano- technology, the functionality and capability of CNT-based biosensors will be enhanced, thus expanding and enriching the possible applications that can be delivered by these devices. © 2012 Bentham Science Publishers. All rights reserved.

Thermal stability of double-ceramic-layer thermal barrier coatings with various coating thickness

Double-ceramic-layer (DCL) coatings with various thickness ratios composed of YSZ (6-8 wt.% Y2O3 + ZrO2) and lanthanum zirconate (LZ, La2Zr2O7) were produced by the atmospheric plasma spraying. Chemical stability of LZ in contact with YSZ in DCL coatings was investigated by calcining powder blends at different temperatures. No obvious reaction was observed when the calcination temperature was lower than 1250 degrees C, implying that LZ and YSZ had good chemical applicability for producing DCL coating. The thermal cycling test indicate that the cycling lives of the DCL coatings are strongly dependent on the thickness ratio of LZ and YSZ, and the coatings with YSZ thickness between 150 and 200 mu m have even longer lives than the single-layer YSZ coating. When the YSZ layer is thinner than 100 mu m, the DCL coatings failed in the LZ layer close to the interface of YSZ layer and LZ layer. For the coatings with the YSZ thickness above 150 mu m, the failure mainly occurs at the interface of the YSZ layer and the bond coat.

Sugar matrices in stabilization of bioactives by dehydration

Development of functional foods with bioactive components requires component stability in foods and ingredients. Stabilization of sensitive bioactive components can be achieved by entrapment or encapsulation of these components in solid food matrices. Lactose or trehalose was used as the structure-forming material for the entrapment of hydrophilic ascorbic acid and thiamine hydrochloride or the encapsulation of oil particles containing hydrophobic α-tocopherol. In the delivery of hydrophobic components, milk protein isolate, soy protein isolate, or whey protein isolate were used as emulsifiers and, in some cases, applied in excess amount to form matrices together with sugars. Dehydrated amorphous structures with bioactives were produced by freezing and freeze-drying. Experimental results indicated that: (i) lactose and trehalose showed similar water sorption and glass transition but very different crystallization behavior as pure sugars; (ii) the glass transition of sugar-based systems was slightly affected by the presence of other components in anhydrous systems but followed closely that of sugar after water plasticization; (iii) sugar crystallization in mixture systems was composition-dependent; (iv) the stability of bioactives was better retained in the amorphous matrices, although small losses of stability were observed for hydrophilic components above glass transition and for hydrophobic components as a function of water activity; (v) sugar crystallization caused significant loss of hydrophilic bioactives as a result of the exclusion from the continuous crystalline phase; (vi) loss of hydrophobic bioactives upon sugar crystallization was a result of dramatic change of emulsion properties and the exclusion of oil particles from the protecting structure; (vii) the double layers at the hydrophilic-hydrophobic interfaces improved the stability of hydrophobic bioactives in dehydrated systems. The present study provides information on the physical and chemical stability of sugar-based dehydrated delivery systems, which could be helpful in designing foods and ingredients containing bioactive components with improved storage stability.