Preparação e caracterização de nanocompósitos de Fe@SiO2, Fe@Fe3O4 e Fe3O4@PNIPAM

Pós-graduação em Química - IQ

Lipases microbianas: produção, propriedades e aplicações biotecnológicas

Conselho Nacional de Desenvolvimento Científico e Tecnológico(CNPq)

Synthesis, spectroscopic characterization, photochemical and photophysical properties and biological activities of ruthenium complexes with mono- and bi-dentate histamine ligand

The monodentate cis-[Ru(phen)(2)(hist)(2)](2+) 1R and the bidentate cis-[Ru(phen)(2)(hist)](2+) 2A complexes were prepared and characterized using spectroscopic (H-1, (H-1-H-1) COSY and (H-1-C-13) HSQC NMR, UV-vis, luminescence) techniques. The complexes presented absorption and emission in the visible region, as well as a tri-exponential emission decay. The complexes are soluble in aqueous and non-aqueous solution with solubility in a buffer solution of pH 7.4 of 1.14 x 10(-3) mol L-1 for (1R + 2A) and 6.43 x 10(-4) mol L-1 for 2A and lipophilicity measured in an aqueous-octanol solution of -1.14 and -0.96, respectively. Photolysis in the visible region in CH3CN converted the starting complexes into cis-[Ru(phen)(2)(CH3CN)(2)](2+). Histamine photorelease was also observed in pure water and in the presence of BSA (1.0 x 10(-6) mol L-1). The bidentate coordination of the histamine to the ruthenium center in relation to the monodentate coordination increased the photosubstitution quantum yield by a factor of 3. Pharmacological studies showed that the complexes present a moderate inhibition of AChE with an IC50 of 21 mu mol L-1 (referred to risvagtini, IC50 181 mu mol L-1 and galantamine IC50 0.006 mu mol L-1) with no appreciable cytotoxicity toward to the HeLa cells (50% cell viability at 925 mu mol L-1). Cell uptake of the complexes into HeLa cells was detected by fluorescence confocal microscopy. Overall, the observation of a luminescent complex that penetrates the cell wall and has low cytotoxicity, but is reactive photochemically, releasing histamine when irradiated with visible light, are interesting features for application of these complexes as phototherapeutic agents.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Use of solvents and environmental friendly materials for applications in Green Chemistry

The present Thesis studies three alternative solvent groups as sustainable replacement of traditional organic solvents. Some aspects of fluorinated solvents, supercritical fluids and ionic liquids, have been analysed with a critical approach and their effective “greenness” has been evaluated from the points of view of the synthesis, the properties and the applications. In particular, the attention has been put on the environmental and human health issues, evaluating the eco-toxicity, the toxicity and the persistence, to underline that applicability and sustainability are subjects with equal importance. The “green” features of fluorous solvents and supercritical fluids are almost well-established; in particular supercritical carbon dioxide (scCO2) is probably the “greenest” solvent among the alternative solvent systems developed in the last years, enabling to combine numerous advantages both from the point of view of industrial/technological applications and eco-compatibility. In the Thesis the analysis of these two classes of alternative solvents has been mainly focused on their applicability, rather than the evaluation of their environmental impact. Specifically they have been evaluated as alternative media for non-aqueous biocatalysis. For this purpose, the hydrophobic ion pairing (HIP), which allows solubilising enzymes in apolar solvents by an ion pairing between the protein and a surfactant, has been investigated as effective enzymatic derivatisation technique to improve the catalytic activity under homogeneous conditions in non conventional media. The results showed that the complex enzyme-surfactant was much more active both in fluorous solvents and in supercritical carbon dioxide than the native form of the enzyme. Ionic liquids, especially imidazolium salts, have been proposed some years ago as “fully green” alternative solvents; however this epithet does not take into account several “brown” aspects such as their synthesis from petro-chemical starting materials, their considerable eco-toxicity, toxicity and resistance to biodegradation, and the difficulty of clearly outline applications in which ionic liquids are really more advantageous than traditional solvents. For all of these reasons in this Thesis a critical analysis of ionic liquids has been focused on three main topics: i) alternative synthesis by introducing structural moieties which could reduce the toxicity of the most known liquid salts, and by using starting materials from renewable resources; ii) on the evaluation of their environmental impact through eco-toxicological tests (Daphnia magna and Vibrio fischeri acute toxicity tests, and algal growth inhibition), toxicity tests (MTT test, AChE inhibition and LDH release tests) and fate and rate of aerobic biodegradation in soil and water; iii) and on the demonstration of their effectiveness as reaction media in organo-catalysis and as extractive solvents in the recovery of vegetable oil from terrestrial and aquatic biomass. The results about eco-toxicity tests with Daphnia magna, Vibrio fischeri and algae, and toxicity assay using cultured cell lines, clearly indicate that the difference in toxicity between alkyl and oxygenated cations relies in differences of polarity, according to the general trend of decreasing toxicity by decreasing the lipophilicity. Independently by the biological approach in fact, all the results are in agreement, showing a lower toxicity for compounds with oxygenated lateral chains than for those having purely alkyl lateral chains. These findings indicate that an appropriate choice of cation and anion structures is important not only to design the IL with improved and suitable chemico-physical properties but also to obtain safer and eco-friendly ILs. Moreover there is a clear indication that the composition of the abiotic environment has to be taken into account when the toxicity of ILs in various biological test systems is analysed, because, for example, the data reported in the Thesis indicate a significant influence of salinity variations on algal toxicity. Aerobic biodegradation of four imidazolium ionic liquids, two alkylated and two oxygenated, in soil was evaluated for the first time. Alkyl ionic liquids were shown to be biodegradable over the 6 months test period, and in contrast no significant mineralisation was observed with oxygenated derivatives. A different result was observed in the aerobic biodegradation of alkylated and oxygenated pyridinium ionic liquids in water because all the ionic liquids were almost completely degraded after 10 days, independently by the number of oxygen in the lateral chain of the cation. The synthesis of new ionic liquids by using renewable feedstock as starting materials, has been developed through the synthesis of furan-based ion pairs from furfural. The new ammonium salts were synthesised in very good yields, good purity of the products and wide versatility, combining low melting points with high decomposition temperatures and reduced viscosities. Regarding the possible applications as surfactants and biocides, furan-based salts could be a valuable alternative to benzyltributylammonium salts and benzalkonium chloride that are produced from non-renewable resources. A new procedure for the allylation of ketones and aldehydes with tetraallyltin in ionic liquids was developed. The reaction afforded high yields both in sulfonate-containing ILs and in ILs without sulfonate upon addition of a small amount of sulfonic acid. The checked reaction resulted in peculiar chemoselectivity favouring aliphatic substrates towards aromatic ketones and good stereoselectivity in the allylation of levoglucosenone. Finally ILs-based systems could be easily and successfully recycled, making the described procedure environmentally benign. The potential role of switchable polarity solvents as a green technology for the extraction of vegetable oil from terrestrial and aquatic biomass has been investigated. The extraction efficiency of terrestrial biomass rich in triacylglycerols, as soy bean flakes and sunflower seeds, was comparable to those of traditional organic solvents, being the yield of vegetable oils recovery very similar. Switchable polarity solvents as been also exploited for the first time in the extraction of hydrocarbons from the microalga Botryococcus braunii, demonstrating the efficiency of the process for the extraction of both dried microalgal biomass and directly of the aqueous growth medium. The switchable polarity solvents exhibited better extraction efficiency than conventional solvents, both with dried and liquid samples. This is an important issue considering that the harvest and the dewatering of algal biomass have a large impact on overall costs and energy balance.

Interpolyelektrolytkomplexe zylindrischer Bürstenpolymere

Die elektrostatische Wechselwirkung zwischen entgegengesetzt geladenen Polyelektrolyten führt zur spontanen Bildung von Interpolyelektrolytkomplexen. Besonders im Fokus des akademischen und biotechnologischen Interesses stehen derzeit Komplexe aus DNA und synthetischen Polykationen, da eine Anwendung dieser speziellen Interpolyelektrolytkomplexe in der nicht-viralen Gentherapie vielfältig diskutiert wird. Ziel der vorliegenden Arbeit war es, den Einfluss von Kettensteifheit auf die Bildung von Interpolyelektrolytkomplexen zu untersuchen und dabei Wege aufzuzeigen, die eine Kontrolle der Topologie von Interpolyelektrolytkomplexen ermöglichen. Neben dem topologischen Einfluss wurde untersucht, wie durch Komplexierung hochmolekularer Polyelektrolyte equilibrierbare Strukturen erhalten werden können. Als Modellsystem für diese Untersuchungen wurden zylindrische Bürstenpolymere verwendet, denen als topologischer „Kontrast“ das Komplexierungsverhalten kommerzieller PAMAM-G5-Dendrimere mit kugelförmiger Topologie gegenüber gestellt wurde. Um den Ladungsgrad des Bürstenpolymers beliebig variieren zu können, wurden Bürstenpolymere mit Poly(ethylenimin)-Seitenketten synthetisiert, deren Ladungsdichte über den Protonierungsgrad einstellbar ist. Die vorliegende Arbeit zeigt, wie diese mit Hilfe der Makromonomermethode hergestellt werden konnten. Die Komplexbildung von DNA mit semiflexiblen zylindrischen Bürstenpolymeren mit unterschiedlichen Seitenketten und Ladungsdichten in wässriger Lösung hat gezeigt, dass diese in allen untersuchten Fällen unter kinetischer Kontrolle verläuft und Nicht-Gleichgewichtsstrukturen gebildet werden. Sehr überraschend wurde festgestellt, dass die Größen der mit vorgelegter DNA gebildeten Komplexe ungeachtet des verwendeten Polykations identisch sind und DNA-Komplexe mit einem Radius von 30 bis 50 nm und einer kugelförmigen Topologie resultieren. Diese kinetisch kontrollierte Komplexbildung konnte in nicht-wässriger Lösung durch starke Reduktion der Anzahl wechselwirkender Ladungen verhindert werden, so dass eine thermodynamische Kontrolle möglich wurde. Unter diesen Bedingungen ist es gelungen, aus hochgeladenen Poly(styrolsulfonat)-Bürsten mit modifizierten Poly(ethylenimin)-Bürsten oder PAMAM-Dendrimeren Komplexe zylindrischer Topologie herzu-stellen. Für letztere konnte darüber hinaus postuliert werden, dass diese Komplexe eine dichteste Packung der PAMAM-Dendrimere darstellen, für deren Bildung das Polyanion mit seiner größeren Konturlänge und seiner zylindrischen Topologie als Templat dient.

Synthese von modifizierten anorganischen Nanopartikeln für polymere Nanokomposite

Die vorliegende Arbeit beschäftigt sich mit der Hydrophobisierung anorganischer Nanopartikel für die Herstellung von Nanokompositen. Aufgrund der großen, reaktiven Oberfläche neigen Nanopartikel zur Aggregation, besonders in hydrophoben Medien. Literaturbekannte Verfahren der nachträglichen Modifizierung bereits existierender Partikeln führen nur teilweise zu gut redispergierbaren Partikeln in hydrophoben Medien. Da die Hülle erst nach der Partikelbildung erzeugt wird, läßt sich die Entstehung von Primäraggregaten nicht vermeiden. Die Neuheit der in dieser Arbeit angewandten Methode ist die Bildung der Partikelhülle vor der Entstehung der Partikel. Die Fällung der Nanopartikel innerhalb wäßriger Emulsionströpfchen schließt eine vorzeitige Aggregation der Partikel aus. Eine große Anzahl unterschiedlicher anorganischer Nanopartikel wurde hergestellt, deren Größe durch Variation der Syntheseparameter beeinflußt werden konnte. Ferner war es möglich, eine breite Variationsmöglichkeit der Art der Partikelhülle darzustellen, die sich als maßgeblich für die Kompatibilität zu einer Polymermatrix herausstellte. Die Kompatibilität zur Matrix ermöglichte eine einwandfreie Dispergierung von unterschiedlichen anorganischen Nanopartikeln im Kompositmaterial. Je nach Auswahl des anorganischen Materials können verschiedene Kompositeigenschaften, wie beispielsweise optische, elektrische, magnetische oder mechanische, beeinflußt werden. In dieser Arbeit wurde der Schwerpunkt auf eine erhöhte UV-Absorption gelegt, wobei sich auch eine verbesserte Schlagzähigkeit der Nanokomposite zeigte. Durch die hervorragende Dispergierung der Nanopartikel in der Matrix waren diese Nanokomposite hochtransparent.

Sintesi e caratterizzazione di nanoparticelle di ossido di stagno dopate

In the last years, new materials have been developed in the broad area of nanoscience. Among them, an emergent class characterized by excellent electrical conductivity properties as well as high optical transmittance in the visible region are TCOs (Transparent Conducting Oxides). Due to their versatile properties, they have found many applications in a lot of optoelectronic devices, such as solar cells, liquid crystal displays, touch-panel displays, gas sensors, to cite a few examples. Different research groups have studied and characterized the TCOs. In this context, a new synthetic method has been developed to produce FTO nanocrystals (Fluorine-doped Tin Oxide NCs) in Prof. Pinna’s lab at the Humboldt University in Berlin. FTO belongs to the TCO category, and they have been studied as a promising alternative to ITO NCs (Indium Tin Oxide) which represent the standard TCO material in terms of properties and performances. In this work, FTO NCs have been synthesized using the “benzyl alcohol route” (a non-aqueous sol-gel method) via microwave, which permits to produce FTO particles with good properties as revealed by the characterizations performed, employing a cheap, fast and clean method.

Geological and hydrogeological features affecting migration, multi-phase partitioning and degradation of chlorinated hydrocarbons through unconsolidated porous media.

Chlorinated solvents are the most ubiquitous organic contaminants found in groundwater since the last five decades. They generally reach groundwater as Dense Non-Aqueous Phase Liquid (DNAPL). This phase can migrate through aquifers, and also through aquitards, in ways that aqueous contaminants cannot. The complex phase partitioning to which chlorinated solvent DNAPLs can undergo (i.e. to the dissolved, vapor or sorbed phase), as well as their transformations (e.g. degradation), depend on the physico-chemical properties of the contaminants themselves and on features of the hydrogeological system. The main goal of the thesis is to provide new knowledge for the future investigations of sites contaminated by DNAPLs in alluvial settings, proposing innovative investigative approaches and emphasizing some of the key issues and main criticalities of this kind of contaminants in such a setting. To achieve this goal, the hydrogeologic setting below the city of Ferrara (Po plain, northern Italy), which is affected by scattered contamination by chlorinated solvents, has been investigated at different scales (regional and site specific), both from an intrinsic (i.e. groundwater flow systems) and specific (i.e. chlorinated solvent DNAPL behavior) point of view. Detailed investigations were carried out in particular in one selected test-site, known as “Caretti site”, where high-resolution vertical profiling of different kind of data were collected by means of multilevel monitoring systems and other innovative sampling and analytical techniques. This allowed to achieve a deep geological and hydrogeological knowledge of the system and to reconstruct in detail the architecture of contaminants in relationship to the features of the hosting porous medium. The results achieved in this thesis are useful not only at local scale, e.g. employable to interpret the origin of contamination in other sites of the Ferrara area, but also at global scale, in order to address future remediation and protection actions of similar hydrogeologic settings.

Morphological ripening of fluid inclusions and coupled zone-refining in quartz crystals revealed by cathodoluminescence imaging: Implications for CL-petrography, fluid inclusion analysis and trace-element geothermometry

Cathodoluminescence (CL) studies have previously shown that some secondary fluid inclusions in luminescent quartz are surrounded by dark, non-luminescent patches, resulting from fracture-sealing by late, trace-element-poor quartz. This finding has led to the tacit generalization that all dark CL patches indicate influx of low temperature, late-stage fluids. In this study we have examined natural and synthetic hydrothermal quartz crystals using CL imaging supplemented by in-situ elemental analysis. The results lead us to propose that all natural, liquid-water-bearing inclusions in quartz, whether trapped on former crystal growth surfaces (i.e., of primary origin) or in healed fractures (i.e., of pseudosecondary or secondary origin), are surrounded by three-dimensional, non-luminescent patches. Cross-cutting relations show that the patches form after entrapment of the fluid inclusions and therefore they are not diagnostic of the timing of fluid entrapment. Instead, the dark patches reveal the mechanism by which fluid inclusions spontaneously approach morphological equilibrium and purify their host quartz over geological time. Fluid inclusions that contain solvent water perpetually dissolve and reprecipitate their walls, gradually adopting low-energy euhedral and equant shapes. Defects in the host quartz constitute solubility gradients that drive physical migration of the inclusions over distances of tens of μm (commonly) up to several mm (rarely). Inclusions thus sequester from their walls any trace elements (e.g., Li, Al, Na, Ti) present in excess of equilibrium concentrations, thereby chemically purifying their host crystals in a process analogous to industrial zone refining. Non-luminescent patches of quartz are left in their wake. Fluid inclusions that contain no liquid water as solvent (e.g., inclusions of low-density H2O vapor or other non-aqueous volatiles) do not undergo this process and therefore do not migrate, do not modify their shapes with time, and are not associated with dark-CL zone-refined patches. This new understanding has implications for the interpretation of solids within fluid inclusions (e.g., Ti- and Al-minerals) and for the elemental analysis of hydrothermal and metamorphic quartz and its fluid inclusions by microbeam methods such as LA-ICPMS and SIMS. As Ti is a common trace element in quartz, its sequestration by fluid inclusions and its depletion in zone-refined patches impacts on applications of the Ti-in-quartz geothermometer.

The promoting effect of water on the electroreduction of CO2 in acetonitrile

The promoting effect of water on the electrochemical reduction of carbon dioxide (CO2) from non-aqueous solvents has been studied by means of cyclic voltammetry and in-situ surface-enhanced infrared absorption spectroscopy (SEIRAS). CO2 electroreduction on gold is known to be highly selective towards CO formation in aqueous and in non-aqueous media. The use of non-aqueous solvents is advantageous due to the significantly increased solubility of CO2 compared to aqueous systems. However, in the absence of any proton source, extremely high overpotentials are required for the CO2 electroreduction. In this work, we demonstrate for the first time a tremendous accelerating effect of water additives on the electroreduction of CO2 taking place at gold/acetonitrile interfaces. Already moderate amounts of water, in the concentration range of 0.5 to 0.7 M, are sufficient to decrease significantly the overpotential of CO2 reduction while keeping the CO2 concentration as high as in the pure acetonitrile. The effect of water additives on the mechanism of CO2 electroreduction on gold is discussed on the basis of electrochemical and IR spectroscopic data. The results obtained from gold are compared to analogue experiments carried out on platinum.

Proceedings of the 23rd Annual Biochemical Engineering Symposium

The 23rd Annual Biochemical Engineering Symposium was held at the University of Oklahoma on April 17, 1993. The objectives of the symposium were to provide 1) a forum for informal discussion of biochemical engineering research being carried at the participating universities and 2) an opportunity for students to present and publish their work. Thirteen papers presented at the symposium are included in the proceedings. Because final publication usually takes place in refereed journals, the articles included here are typically brief and often cover work in progress. The program of the symposium and a list of participants are included in the proceedings. ContentsA Low-Cost Bioreactor Strategy for RNA Synthesis, H. Anthony Marble, Eleni Chrisikos, and Robert H. Davis Development of a CELSS Bioreactor: Oxygen Transfer and Micromixing in Parabolic Flight, P.E. Villeneuve, K.S. Wenger, B.G. Thompson, T. Kedar, and E.H. Dunlop Scale-up of Dexter Murine Bone Marrow Cultures Utilizing a Three-Dimensional Fiberglass Support Matrix, John G. Highfill, Paul Todd, Steve Haley, and Dhinaker Kompala Modeling and Estimation of States of Recombinant Fermentations Using Nonlinear Input/Output Models, Vicotr M. Saucedo and M. Nazmul Karim Deadent Microfiltration of Bovine Serum Albumin Suspension Through Yeast Cake Layers and Assymetric Polymeric Membranes, Naveen Arora and Robert H. Davis Monitoring the Fate of Toluene and Phenol in the Rhizosphere, N. Muralidharan, Lawrence C. Davis, and Larry E. Erickson Hydrodynamic Motions Associated with Bubble Coalescence and Breakup, T.Y. Yiin, L.A. Glasgow, and L.E. Erickson Expression and Purification of a-Human Atrial Natriuretic Peptide in Escherichia coli by Fusion with L-Asparaginase, Nien-Tung Ma and Roger G. Harrison High Pressure Crystallization of Proteins, Mungara V. Saikumar, Charles E. Glatz, and Maurice A. Larson Structure/Function Relationships in the Catalytic and Starch Binding Domains of Glucoamylase, Pedro M. Coutinho, Clark Ford, Peter J. Reilly Cellular Responses of Insect Cell Spodoptera frugiperda to Environmental Stresses, Paul Yeh, Grace Y. Sun, Gary A. Weisman, Rakesh Bajpai A Novel Approach to Understanding the Antimicrobial Activity of Peptides, Naveen Pathak, Marie-Helene Janna, Gael Ruche, David McCarthy, and Roger Harrison Mass Transfer in the Bioremediation of Soils Contaminated with Trapped Non-Aqueous Phase Liquids, Xiaoqing Yang, Larry E. Jacobson, and L.T. Fan

Proceedings of the Twenty-Fifth Annual Biochemical Engineering Symposium

The Annual Biochemical Engineering Symposium Series started in 1970 when Professors Larry E. Erickson (Kansas State University) and Peter J. Reilly (then with University of Nebraska-Lincoln) got together in Manhattan, KS along with their students for a half-day powwow and technical presentation by their students. Ever since then, it has been a forum for Biochemical Engineering students in the heartland of USA to present their research to their colleagues in the form of talks and posters. The institutions actively involved with this annual symposium include Colorado State University, Kansas State University, Iowa State University, University of Colorado, University of Kansas, University of Missouri-Columbia, and University of Oklahoma. The University of lowa and University of Nebraska-Lincoln have also participated in the conference in recent years. The host institutions for the different symposia have been: Kansas State University (1, 3, 5, 9, 12, 16, 20), Iowa State University (6, 7, 10, 13, 17, 22), University of Missouri-Columbia (8, 14, 19, 25), Colorado State University (II, 15, 21), University of Colorado (18, 24), University of Nebraska-Lincoln (2, 4), University of Oklahoma (23). The next symposium will be held at Kansas State University. Proceedings of the Symposium are edited by faculty of the host institution and include manuscripts written and submitted by the presenters (students). These often include works-in-progress and final publication usually takes place in refereed journals. ContentsPatrick C. Gilcrease and Vincent G. Murphy, Colorado State University. Use of 2,4,6-Trinitrotoluene (TNT) As A Nitrogen Source By A Pseudomonas florescens Species Under Aerobic Conditions. Marulidharan Narayanan, Lawrence C. Davis, and Larry E. Erickson, Kansas State University. Biodegradation Studies of Chlorinated Organic Pollutants in a Chamber in the Presence of Alfalfa Plants. S.K. Santharam, L.E. Erickson, and L.T. Fan, Kansas State University.Surfactant-Enhanced Remediation of a Non-Aqueous Phase Contaminant in Soil. Barry Vant-Hull, Larry Gold, and Robert H. Davis, University of Colorado.The Binding of T7 RNA Polymerase to Double-Stranded RNA. Jeffrey A. Kern and Robert H. Davis, University of Colorado.Improvement of RNA Transcription Yield Using a Fed-Batch Enzyme Reactor. G. Szakacs, M. Pecs, J. Sipocz, I. Kaszas, S.R. Deecker, J.C. Linden, R.P. Tengerdy, Colorado State University.Bioprocessing of Sweet Sorghum With In Situ Produced Enzymes. Brad Forlow and Matthias Nollert, University of Oklahoma.The Effect of Shear Stress ad P-selectin Site Density on the Rolling Velocity of White Blood Cells. Martin C. Heller and Theodore W. Randolph, University of Colorado.The Effects of Plyethylene Glycol and Dextran on the Lyophilization of Human Hemoglobin. LaToya S. Jones and Theodore W. Randolph, University of Colorado.Purification of Recombinant Hepatitis B Vaccine: Effect of Virus/Surfactant Interactions. Ching-Yuan Lee, Michael G. Sportiello, Stephen Cape, Sean Ferree, Paul Todd, Craig E. Kundrot, and Cindy Barnes, University of Colorado.Application of Osmotic Dewatering to the Crystallization of Oligonucleotides for Crystallography. Xueou Deng, L.E. Erickson, and D.Y.C. Fung, Kansas State University.Production of Protein-Rich Beverages from Cheese Whey and Soybean by rapid Hydration Hydrothermal Cooking. Pedro M. Coutinho, Michael K. Dowd, and Peter J. Reilly, Iowa State University.Automated Docking of Glucoamylase Substrates and Inhibitors. J. Johansson and R.K. Bajpai, University of Missouri.Adsorption of Albumin on Polymeric Microporous Membranes.

Soft solution fluorine-free synthesis of anatase nanoparticles with tailored morphology

TiO2 nanoparticles with tailored morphology have been synthesized under exceptionally soft conditions. The strategy is based on the use of a non-aqueous alcoholic reaction medium in which water traces, coming either from the air (atmospheric water) or from an ethanol–water azeotropic mixture (ethanol 96%), are incorporated in order to accelerate hydrolysis of the Ti–precursor. Moreover, organic surfactants have been used as capping agents so as to tailor crystal growth in certain preferential directions. Combinations of oleic acid and oleylamine, which lead to the formation of another surfactant, dioleamide, are employed instead of fluorine-based compounds, thus increasing the sustainability of the process. As a result, TiO2 nanostructured hierarchical microspheres and individual nanoparticles with exposed high-energy facets can be obtained at atmospheric pressure and temperatures as low as 78 °C.

Manufacturing DNA microarrays of high spot homogeneity and reduced background signal

Analyses on DNA microarrays depend considerably on spot quality and a low background signal of the glass support. By using betaine as an additive to a spotting solution made of saline sodium citrate, both the binding efficiency of spotted PCR products and the homogeneity of the DNA spots is improved significantly on aminated surfaces such as glass slides coated with the widely used poly-l-lysine or aminosilane. In addition, non-specific background signal is markedly diminished. Concomitantly, during the arraying procedure, the betaine reduces evaporation from the microtitre dish wells, which hold the PCR products. Subsequent blocking of the chip surface with succinic anhydride was improved considerably in the presence of the non-polar, non-aqueous solvent 1,2-dichloroethane and the acylating catalyst N-methylimidazole. This procedure prevents the overall background signal that occurs with the frequently applied aqueous solvent 1-methyl-2-pyrrolidone in borate buffer because of DNA that re-dissolves from spots during the blocking process, only to bind again across the entire glass surface.