PS1-10afx at z = 1.388: Pan-STARRS1 Discovery of a New Type of Superluminous Supernova

We present the Pan-STARRS1 discovery of PS1-10afx, a unique hydrogen-deficient superluminous supernova (SLSN) at redshift z = 1.388. The light curve peaked at z P1 = 21.7 mag, making PS1-10afx comparable to the most luminous known SNe, with Mu = -22.3 mag. Our extensive optical and near-infrared observations indicate that the bolometric light curve of PS1-10afx rose on the unusually fast timescale of ~12 days to the extraordinary peak luminosity of 4.1 × 1044 erg s-1 (M bol = -22.8 mag) and subsequently faded rapidly. Equally important, the spectral energy distribution is unusually red for an SLSN, with a color temperature of ~6800 K near maximum light, in contrast to previous hydrogen-poor SLSNe, which are bright in the ultraviolet (UV). The spectra more closely resemble those of a normal SN Ic than any known SLSN, with a photospheric velocity of ~11, 000 km s-1 and evidence for line blanketing in the rest-frame UV. Despite the fast rise, these parameters imply a very large emitting radius (gsim 5 × 1015 cm). We demonstrate that no existing theoretical model can satisfactorily explain this combination of properties: (1) a nickel-powered light curve cannot match the combination of high peak luminosity with the fast timescale; (2) models powered by the spindown energy of a rapidly rotating magnetar predict significantly hotter and faster ejecta; and (3) models invoking shock breakout through a dense circumstellar medium cannot explain the observed spectra or color evolution. The host galaxy is well detected in pre-explosion imaging with a luminosity near L*, a star formation rate of ~15 M ⊙ yr-1, and is fairly massive (~2 × 1010 M ⊙), with a stellar population age of ~108 yr, also in contrast to the young dwarf hosts of known hydrogen-poor SLSNe. PS1-10afx is distinct from known examples of SLSNe in its spectra, colors, light-curve shape, and host galaxy properties, suggesting that it resulted from a different channel than other hydrogen-poor SLSNe.

Shape stabilised phase change materials based on a high melt viscosity HDPE and paraffin waxes

Shape stabilised phase change materials (SSPCMs) based on a high density poly(ethylene)(hv-HDPE) with high (H-PW, Tm = 56–58 °C) and low (L-PW, Tm = 18–23 °C) melting point paraffin waxes were readily prepared using twin-screw extrusion. The thermo-physical properties of these materials were assessed using a combination of techniques and their suitability for latent heat thermal energy storage (LHTES) assessed. The melt processing temperature (160 °C) of the HDPE used was well below the onset of thermal decomposition of H-PW (220 °C), but above that for L-PW (130 °C), although the decomposition process extended over a range of 120 °C and the residence time of L-PW in the extruder was <30 s. The SSPCMs prepared had latent heats up to 89 J/g and the enthalpy values for H-PW in the respective blends decreased with increasing H-PW loading, as a consequence of co-crystallisation of H-PW and hv-HDPE. Static and dynamic mechanical analysis confirmed both waxes have a plasticisation effect on this HDPE. Irrespective of the mode of deformation (tension, flexural, compression) modulus and stress decreased with increased wax loading in the blend, but the H-PW blends were mechanically superior to those with L-PW.

Emergence of a new type of porcine circovirus (PCV) in swine: a type 1 and type 2 PCV recombinant.

In late September 2008, tissue samples from piglets experiencing an acute outbreak of porcine reproductive and respiratory syndrome (PRRS) were submitted to the Veterinary diagnostic service of the University of Montreal. Several diagnostic assays were performed including a multiplex real-time quantitative PCR assay (mrtqPCR) for the detection and differentiation of porcine circovirus (PCV) type 2a and 2b genotypes in the lung and lymph nodes. The pig samples were found to be positive for PCV2a using the mrtqPCR but odd results were obtained. The Ct values obtained with mrtqPCR probes targeting the ORF1 and ORF2 of PCV2 were not as expected which suggested the presence of genomic variations in the PCV2 viral genome. Ultimately, a total of three diagnostic cases with mrtqPCR unusual results were investigated. After virus isolation and sequence analyses, a new type of PCV was identified in those three cases. Based on sequence analyses, this new PCV genome contains the ORF1 of PCV1 and the ORF2 of PCV2a and its entire viral genome nucleotide identity compared to PCV1, PCV2a and 2b are 86.4%, 88.7% and 86.5%, respectively. It is proposed to name this new PCV by taking into account the nomenclature of Segales et al. (2008) and by indicating the origin of the ORF1 at first and the origin of the ORF2 in second. Consequently, the name proposed for this new PCV is PCV1/2a. The prevalence of PCV1/2a seems to be very low in Quebec, Canada (2.5% of PCV positive cases), and its origin is now in debate.

Development of a new type of simulated scalar feed

This thesis presents the results of an investigation conducted for the development of a new type of feed horn antenna called "Simulated Scalar Feed". A schematic presentation of the work is given below. A review of the past important work done in the field of conventional/multimode electromagnetic horn antennas is presented in the first part of the second chapter. The work carried out on corrugated horns and surfaces are included in the second part of the review. In the third part, work on dielectric and dielectric loaded metal horns are reviewed. In all the parts of the review, special emphasis is given to theoretical design considerations. The methodology adopted for the experimental investigations is presented in the third chapter. The instrumentation utilized and thThis thesis presents the results of an investigation conducted for the development of a new type of feed horn antenna called "Simulated Scalar Feed". A schematic presentation of the work is given below. A review of the past important work done in the field of conventional/multimode electromagnetic horn antennas is presented in the first part of the second chapter. The work carried out on corrugated horns and surfaces are included in the second part of the review. In the third part, work on dielectric and dielectric loaded metal horns are reviewed. In all the parts of the review, special emphasis is given to theoretical design considerations. The methodology adopted for the experimental investigations is presented in the third chapter. The instrumentation utilized and the details of fabrication ofe details of fabrication of the new simulated scalar feed are described. The method of measurements of radiation characteristics of the antenna are also explained in this chapter. In the fourth chapter the outcome of the experimental results of the investigations carried out on horn antennas fabricated with different physical dimensions and different parameters for the E—plane boundary walls are highlighted. The theoretical explanation used to explain the experimental results is given in the fifth chapter of the thesis. A comparison between the experimental and the theoretical results is also presented in this chapter. In chapter six, the conclusions drawn from the experimental as well as the theoretical investigations are discussed. The advantages and features of the newly developed simulated scalar feed is examined in this chapter. Scope of further investigations in this field is also discussed at the end of this chapter.

A new feedback on climate change from the hydrological cycle

An intensification of the hydrological cycle is a likely consequence of global warming. But changes in the hydrological cycle could affect sea-surface temperature by modifying diffusive ocean heat transports. We investigate this mechanism by studying a coupled general circulation model sensitivity experiment in which the hydrological cycle is artificially amplified. We find that the amplified hydrological cycle depresses sea-surface temperature by enhancing ocean heat uptake in low latitudes. We estimate that a 10% increase in the hydrological cycle will contribute a basin-scale sea-surface temperature decrease of around 0.1°C away from high latitudes, with larger decreases locally. We conclude that an intensified hydrological cycle is likely to contribute a weak negative feedback to anthropogenic climate change.

Performance of phase change material boards under natural convection

The high thermal storage capacity of phase change material (PCM) can reduce energy consumption in buildings through energy storage and release when combined with renewable energy sources, night cooling, etc. PCM boards can be used to absorb heat gains during daytime and release heat at night. In this paper, the thermal performance of an environmental chamber fitted with phase change material boards has been investigated. During a full-cycle experiment, i.e. charging–releasing cycle, the PCM boards on a wall can reduce the interior wall surface temperature during the charging process, whereas the PCM wall surface temperature is higher than that of the other walls during the heat releasing process. It is found that the heat flux density of the PCM wall in the melting zone is almost twice as large as that of ordinary wall. Also, the heat-insulation performance of a PCM wall is better than that of an ordinary wall during the charging process, while during the heat discharging process, the PCM wall releases more heat energy. The convective heat transfer coefficient of PCM wall surface calculated using equations for a normal wall material produces an underestimation of this coefficient. The high convective heat transfer coefficient for a PCM wall is due to the increased energy exchange between the wall and indoor air.

A new theory of educational change - punctuated equilibrium: the case of the internationalisation of Higher Education institutions

This article argues for a new theoretical paradigm for the analysis of change in educational institutions that is able to deal with such issues as readiness for change, transformational change and the failure of change strategies. Punctuated equilibrium (Tushman and Romanelli, 1985) is a theory which has wide application. It envisages long-term change as being made up of a succession of long periods of relative stability interspersed by brief periods of rapid profound change. In the periods of stability only relatively small incremental changes are possible. The periods of transformational change may be triggered by external or internal influences. A recent study of the long-term process of internationalisation in higher education institutions shows evidence to support the theory: long periods of incremental change, events precipitating profound change and the failure of externally imposed attempts to change. Also, as the theory predicts, changes in collegial organisations are slower and more uncertain than changes in managed organisations.

A moving-mesh finite element method and its application to the numerical solution of phase-change problems

A distributed Lagrangian moving-mesh finite element method is applied to problems involving changes of phase. The algorithm uses a distributed conservation principle to determine nodal mesh velocities, which are then used to move the nodes. The nodal values are obtained from an ALE (Arbitrary Lagrangian-Eulerian) equation, which represents a generalization of the original algorithm presented in Applied Numerical Mathematics, 54:450--469 (2005). Having described the details of the generalized algorithm it is validated on two test cases from the original paper and is then applied to one-phase and, for the first time, two-phase Stefan problems in one and two space dimensions, paying particular attention to the implementation of the interface boundary conditions. Results are presented to demonstrate the accuracy and the effectiveness of the method, including comparisons against analytical solutions where available.

A new type of Brazilian propolis: Prenylated benzophenones in propolis from Amazon and effects against cariogenic bacteria

Ethanol extracts of four propolis samples (E1-E4) from Manaus (Brazilian Amazon) were analysed by HPLC/DAD/ESI-MS/MS and GC/EIMS. The major constituents of E2 and E4 were analysed by NMR ((1)H and (13)C) and ESI/MS/MS. The main constituents of E2 and E4 are polyprenylated benzophenones: 7-epi-nemorosone, 7-epi-clusianone (major E4 constituents), xanthochymol and gambogenone (major E2 constituents), making up a chemical profile so far unreported for Brazilian propolis. Aristhophenone, methyl insigninone, 18-ethyloxy-17-hydroxy-17,18-dihydroscrobiculatone B, and derivatives of dimethyl weddellianone A and B, propolones, and a scrobiculatone derivative, were detected as minor constituents. Triterpenoids (beta-amyrins, beta-amyrenone, lupeol and lupenone) were ubiquitous and predominant in El and E3. The extracts E2 and E4 were highly active against the cariogenic bacteria Streptococcus mitis, Streptococcus mutans and Streptococcus salivarius. E2 was more active than E4, probably due to a higher content of 2-epi-nemorosone, while the latter was richer in di-hydroxylated compounds. (C) 2010 Elsevier Ltd. All rights reserved.