Limiting two-Higgs-doublet models

We update the constraints on two-Higgs-doublet models (2HDMs) focusing on the parameter space relevant to explain the present muon g - 2 anomaly, Delta alpha(mu), in four different types of models, type I, II, ``lepton specific'' (or X) and ``flipped'' (or Y). We show that the strong constraints provided by the electroweak precision data on the mass of the pseudoscalar Higgs, whose contribution may account for Delta alpha(mu), are evaded in regions where the charged scalar is degenerate with the heavy neutral one and the mixing angles alpha and beta satisfy the Standard Model limit beta - alpha approximate to pi/2. We combine theoretical constraints from vacuum stability and perturbativity with direct and indirect bounds arising from collider and B physics. Possible future constraints from the electron g - 2 are also considered. If the 126 GeV resonance discovered at the LHC is interpreted as the light CP-even Higgs boson of the 2HDM, we find that only models of type X can satisfy all the considered theoretical and experimental constraints.

Common effect of chemical and external pressures on the magnetic properties of RCoPO (R = La, Pr, Nd, Sm). II.

We investigate the direct correspondence between Co band ferromagnetism and structural parameters in the pnictide oxides RCoPO for different rare-earth ions (R = La, Pr, Nd, Sm) by means of muon-spin spectroscopy and ab initio calculations, complementing our results published previously G. Prando et al., Common effect of chemical and external pressures on the magnetic properties of RCoPO (R = La, Pr), Phys. Rev. B 87, 064401 (2013)]. We find that both the transition temperature to the ferromagnetic phase T-C and the volume of the crystallographic unit cell V are conveniently tuned by the R ionic radius and/or external pressure. We report a linear correlation between T-C and V and our ab initio calculations unambiguously demonstrate a full equivalence of chemical and external pressures. As such, we show that R ions influence the ferromagnetic phase only via the induced structural shrinkage without involving any active role from the electronic f degrees of freedom, which are only giving a sizable magnetic contribution at much lower temperatures.

Experiments in Neutrino Mass and Mixing: Part I - New Limits on Heavy Neutrino Emission in Nuclear Beta Decay. Part II - Fast Neutron Backgrounds for the San Onofre Neutrino Detector

In Part I of this thesis, a new magnetic spectrometer experiment which measured the β spectrum of ^(35)S is described. New limits on heavy neutrino emission in nuclear β decay were set, for a heavy neutrino mass range between 12 and 22 keV. In particular, this measurement rejects the hypothesis that a 17 keV neutrino is emitted, with sin^2 θ = 0.0085, at the 6δ statistical level. In addition, an auxiliary experiment was performed, in which an artificial kink was induced in the β spectrum by means of an absorber foil which masked a fraction of the source area. In this measurement, the sensitivity of the magnetic spectrometer to the spectral features of heavy neutrino emission was demonstrated.

In Part II, a measurement of the neutron spallation yield and multiplicity by the Cosmic-ray Underground Background Experiment is described. The production of fast neutrons by muons was investigated at an underground depth of 20 meters water equivalent, with a 200 liter detector filled with 0.09% Gd-loaded liquid scintillator. We measured a neutron production yield of (3.4 ± 0.7) x 10^(-5) neutrons per muon-g/cm^2, in agreement with other experiments. A single-to-double neutron multiplicity ratio of 4:1 was observed. In addition, stopped π^+ decays to µ^+ and then e^+ were observed as was the associated production of pions and neutrons, by the muon spallation interaction. It was seen that practically all of the π^+ produced by muons were also accompanied by at least one neutron. These measurements serve as the basis for neutron background estimates for the San Onofre neutrino detector.

Studies of Zγ production and constraints on anomalous triple gauge couplings in pp collisions at √s = 7 TeV

In this thesis, we test the electroweak sector of the Standard Model of particle physics through the measurements of the cross section of the simultaneous production of the neutral weak boson Z and photon γ, and the limits on the anomalous Zγγ and ZZγ triple gauge couplings h3 and h4 with the Z decaying to leptons (electrons and muons). We analyze events collected in proton-proton collisions at center of mass energy of sqrt(s) = 7 TeV corresponding to an integrated luminosity of 5.0 inverse femtobarn. The analyzed events were recorded by the Compact Muon Solenoid detector at the Large Hadron Collider in 2011.

The production cross section has been measured for hard photons with transverse momentum greater than 15 GeV that are separated from the the final state leptons in the eta-phi plane by Delta R greater than 0.7, whose sum of the transverse energy of hadrons over the transverse energy of the photon in a cone around the photon with Delta R less than 0.3 is less than 0.5, and with the invariant mass of the dilepton system greater than 50 GeV. The measured cross section value is 5.33 +/- 0.08 (stat.) +/- 0.25 (syst.) +/- 0.12 (lumi.) picobarn. This is compatible with the Standard Model prediction that includes next-to-leading-order QCD contributions: 5.45 +/- 0.27 picobarn.

The measured 95 % confidence-level upper limits on the absolute values of the anomalous couplings h3 and h4 are 0.01 and 8.8E-5 for the Zγγ interactions, and, 8.6E-3 and 8.0E-5 for the ZZγ interactions. These values are also compatible with the Standard Model where they vanish in the tree-level approximation. They extend the sensitivity of the 2012 results from the ATLAS collaboration based on 1.02 inverse femtobarn of data by a factor of 2.4 to 3.1.

Search for heavy neutral resonances in the dielectron channel with the CMS detector at the LHC

A search for dielectron decays of heavy neutral resonances has been performed using proton-proton collision data collected at √s = 7 TeV by the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC) in 2011. The data sample corresponds to an integrated luminosity of 5 fb⁻¹. The dielectron mass distribution is consistent with Standard Model (SM) predictions. An upper limit on the ratio of the cross section times branching fraction of new bosons, normalized to the cross section times branching fraction of the Z boson, is set at the 95 % confidence level. This result is translated into limits on the mass of new neutral particles at the level of 2120 GeV for the Z′ in the Sequential Standard Model, 1810 GeV for the superstring-inspired Z′_ψ resonance, and 1940 (1640) GeV for Kaluza-Klein gravitons with the coupling parameter k/M_Pl of 0.10 (0.05).

μ^-子催化核聚变中强脉冲激光对介原子μ^3He的电离

数值求解了一维含时的Schroedinger方程，研究了μ子催化核聚变反应中激光强度和波长对介原子μ^3He电离的影响．发现当激光强度为10^19-10^23W/cm^2量级时，介原子μ^3He有2．7％左右的电离率；当激光强度达到6．0×10^24W/cm^2时，对介原子μ^3He有显著的电离，并且电离率随着激光的强度、波长而递增，进而会有效提高μ子的催化效率．

The propagation and deposition of fast muons in dense DT mixture

The propagation of the fast muon population mainly due to collisional effect in a dense deuterium-tritium (DT for short) mixture is investigated and analysed within the framework of the relativistic Fokker-Planck equation. Without the approximation that the muons propagate straightly in the DT mixture, the muon penetration length, the straggling length, and the mean transverse dispersion radius are calculated for different initial energies, and especially for different densities of the densely compressed DT mixture in our suggested muon-driven fast ignition (FI). Unlike laser-driven FI requiring super-high temperature, muons can catalyze DT fusion at lower temperatures and may generate an ignition sparkle before the self-heating fusion follows. Our calculation is important for the feasibility and the experimental study of muon-driven FI.

Multi-model inference ranking and applications to physics at the Large Hadron Collider

In the measurement of the Higgs Boson decaying into two photons the parametrization of an appropriate background model is essential for fitting the Higgs signal mass peak over a continuous background. This diphoton background modeling is crucial in the statistical process of calculating exclusion limits and the significance of observations in comparison to a background-only hypothesis. It is therefore ideal to obtain knowledge of the physical shape for the background mass distribution as the use of an improper function can lead to biases in the observed limits. Using an Information-Theoretic (I-T) approach for valid inference we apply Akaike Information Criterion (AIC) as a measure of the separation for a fitting model from the data. We then implement a multi-model inference ranking method to build a fit-model that closest represents the Standard Model background in 2013 diphoton data recorded by the Compact Muon Solenoid (CMS) experiment at the Large Hadron Collider (LHC). Potential applications and extensions of this model-selection technique are discussed with reference to CMS detector performance measurements as well as in potential physics analyses at future detectors.

Radiative tau production and decay

A study of the muon decay channel of the τ lepton with the presence of a photon has been carried out to verify theoretical predictions for the production rate of e⁺e^- → τ⁺τ^-γ and for the branching ratio of τ^- → ν_τ µ^-ν_µγ. Included in this study is the first direct measurement of radiative tau decay. Using e⁺e^- annihilation data taken at 29 GeV center-of-mass energy with the Mark II detector, we find the ratio of the measured τ^- → ν_τ µ^-ν_µγ branching fraction to the expected value from QED to be 1.03 ± 0.42. The ratio of measured-to-predicted number of events from radiative T production, e⁺e^- → τ⁺τ^-γ, where one of the τ's decay to μνν is found to be 0.91 ± 0.20. We have not seen an indication of anomalous behavior in radiative tau events.

Estudo do comportamento de variáveis cinemáticas na produção difrativa de mésons D-+* em colisões próton-próton √s = 7TeV

Apresentamos um estudo preliminar da produção difrativa de mésons utilizando dados obtidos da colisão próton-próton, a energias de centro de massa de 7 TeV, com o experimento CMS-LHC. O trabalho inclui o desenvolvimento do algoritmo de reconstrução dos mésons D* através do canal de decaimento D*->D0 + pion (lento) ->K+pion, a medida da eficiência de detecção e reconstrução, e uma análise do comportamento de variáveis cinemáticas na produção difrativa dessas partículas, particularmente, das lacunas de rapidez. Para isso, foi utilizada uma luminosidade integrada de 3,171pb^(-1) de dados coletados no ano de 2010. As análises com os dados experimentais foram comparadas com os resultados obtidos com geradores de Monte Carlo PYTHIA6, PYTHIA8 e POMPYT.

Estudo da produção de multijatos em colisões próton-próton com √s= 7 TeV no detector CMS/LHC

O Compact Muon Solenoid (CMS) é um dos principais detectores instalados no LHC que possibilita o estudo de diferentes aspectos da Física, indo do Modelo Padrão à matéria escura. Esse detector de propósito geral, foi construído para ser capaz de medir múons com uma grande precisão e todos os seus subdetectores foram construídos com uma alta granularidade, tornando possível identificar e caracterizar as propriedades cinemáticas das partículas finais da colisão. O algoritmo de reconstrução de eventos inclui a identificação de jatos, ou seja, é possível identificar a assinatura da produção de pártons na colisão e a medida de seções de choque da produção de muitos jatos é um dos métodos para se explorar as contribuições da Cromodinâmica Quântica (Quantum Chromodynamics - QCD) perturbativa, permitindo avaliar as previsões implementadas nas simulações de eventos. Tendo em vista a caracterização de processos relacionados com a QCD em colisões de próton-próton a uma energia do centro de massa de 7 TeV, é apresentada a medida da seção de choque da produção inclusiva de multijatos no CMS. Para realizar essa medida foram utilizados dados reais coletados em 2010, onde não se apresentava muitas colisões por cruzamento de pacote, com uma luminosidade integrada de L = 2,869 pb-1 e utilizando jatos que estão em quase todo o espaço de fase acessível em pseudorapidez |n|≤ 4,8 e momentum transverso pT ≥ 30 GeV/ c2. Desse resultado foram removidos os efeitos de detecção comparado com predições simuladas.

Estudo dos processos de dijatos exclusivos a √s = 7 TeV no CMS/LHC

Este trabalho apresenta um estudo sobre a produção de dijatos exclusivos em interações pp, do tipo pp → p "+" dijatos "+" p, onde os prótons desta interação permanecem intactos, e o símbolo "+" indica uma lacuna na pseudorapidez, uma região com ausência de atividade hadrônica entre os prótons espalhados e o sistema central de dijatos; este processo é conhecido como produção central exclusiva. A análise utiliza uma amostra de dados que corresponde a uma luminosidade efetiva de 24;48 pb-1 coletados pelo experimento Compact Muon Solenoid (CMS) no Large Hadron Collider (LHC), no ano de 2010, com energia de centro de massa √s = 7 TeV. Este canal possui uma assinatura experimental única, caracterizada pelos prótons espalhados na região frontal, ou a baixos ângulos e duas grandes lacunas opostas. O processo da produção central exclusiva é útil para o entendimento das interações no contexto da QCD.

Development of a GEM Electronic Board (GEB) for triple-GEM detectors

Developed for use with triple GEM detectors, the GEM Electronic Board (GEB) forms a crucial part of the electronics readout system being developed as part of the CMS muon upgrade program. The objective of the GEB is threefold; to provide stable powering and ground for the VFAT3 front ends, to enable high-speed communication between 24 VFAT3 front ends and an optohybrid, and to shield the GEM detector from electromagnetic interference. The paper describes the concept and design of a large-size GEB in detail, highlighting the challenges in terms of design and feasibility of this deceptively difficult system component.

Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.

Sources of perceived support from friends in exercise : an application of self-determination theory /

Background: This study examined three social factors (i.e., autonomy support, structure, and involvement) and their relationship with the motivational processes proposed by Vallerand ( 1 997). This study explored sources of support for exercise participation. -~ ' Methods: Participants (N = 425) completed self-reported instruments which assessed variables outlined within Vallerand's ( 1 997) HMIEM. Results: Structural equation modeling analyses predicting the cognitive/affective and exercise behaviour accounted for 23 percent of variance in positive affect, 10 percent of variance in negative affect, 38 percent of variance in physical self-concept, and 4 percent of variance in exercise behaviour. Exploratory analyses revealed that friends, romantic partners, and educators to be consistent sources for providing autonomy support, structure, and involvement, f !,< r - r* Summary: This study is among the first to examine perceived sources oi autonomy support, structure, and involvement from friends in the exercise context and suggest such perceptions may contribute to motivating exercise behaviour in post-secondary students.