Coal combustion residues valorisation:Research and development on compressed brick production

This paper presents the results of an experimental investigation on compressive strength of unfired compressed brick obtained with coal combustion residues (CCRs) produced by the Niger Coal Society. Preliminary physical and optical (XRD and SEM) characterisation of coal slag, including lixiviation tests, have been carried out. Cement powder, lateritic clayey soil and sand have been chosen as stabilizing agents for bricks. 12 dosages have been tested and about 300 bricks have been produced with a hand-operated press. Results show uniaxial compressive strengths (UCSs) ranging from 4 MPa to 27 MPa for the highest cement stabilisation ratio. UCS higher than 7.5 MPa have been observed for stabilisation with 20% of laterite +10% cement after 45 days of curing. Obtained bricks showed good mechanical resistance and low weight. No health threat has been detected for the obtained samples. Study developments are oriented towards the analysis of Pozzolanic properties of CCRs, properties of hydrated lime stabilisation, thermal properties and durability assessment.© 2012 Elsevier Ltd. All rights reserved.

Coal Combustion Residuals valorisation through the production of compressed masonry brick

The Niger Coal Society (Societé Nigérienne de Charbon – SONICHAR) produces electricity for local consumption in Tefereyre, 75 km north-west from Agadez, Niger. The coal combustion residuals production is about 150,000 tons per year. In order to reduce this environmental burden and to valorize these by-products, a study focusing on their physical and chemical features as well as on the mechanical resistance of compressed brick has been undertaken. Physical characterization of coal slag, chemical and lixiviation tests have been carried out, assessing the material main parameters, verifying the presence of hazardous composites and elements and comparing the obtained results with the findings of an in-deep literary review. Cement powder has been chosen as stabilizing agent as a preliminary option. Four different dosages have been tested and bricks have been produced with a hand-operated press. Compressive strength has been tested at different days of curing. Results show remarkable uniaxial compressive strengths (UCS) for all the mixes after cure, ranging from 4MPa up to more than 20MPa for the highest stabilization ratio. UCS higher than 5MPa have been observed for 20% and 30% cement stabilization ratios after only 7 days of cure, reaching respectively about 11MPa and 13MPa after 45 days. In conclusion obtained bricks show good mechanical resistance and low weight. No health threat has been detected from the obtained sample. Study developments are oriented towards the feasibility of the utilization of low-cost, locally available stabilization means, notably clay and cohesive soils, and on thermal properties assessment.

Larval development of the pedunculate barnacles Octolasmis angulata Aurivillius 1894 and Octolasmis cor Aurivillius 1892 (Cirripedia: Thoracica: Poecilasmatidae) from the gills of the mud crab, Scylla tranquebarica Fabricius, 1798

Detailed studies of larval development of Octolasmis angulata and Octolasmis cor are pivotal in understanding the larval morphological evolution as well as enhancing the functional ecology. Six planktotrophic naupliar stages and one non-feeding cyprid stage are documented in details for the first time for the two species of Octolasmis. Morphologically, the larvae of O. angulata and O. cor are similar in body size, setation patterns on the naupliar appendages, labrum, dorsal setae-pores, frontal horns, cyprid carapace, fronto-lateral gland pores, and lattice organs. Numbers of peculiarities were observed on the gnathobases of the antennae and mandible throughout the naupliar life-cycle. The setation pattern on the naupliar appendages are classified based on the segmentation on the naupliar appendages. The nauplius VI of both species undergoes a conspicuous change before metamorphosis into cyprid stage. The cyprid structures begin to form and modify beneath the naupliar body towards the end of stage VI. This study emphasises the importance of the pedunculate barnacle larval developmental studies not only to comprehend the larval morphological evolution but also to fill in the gaps in understanding the modification of the naupliar structures to adapt into the cyprid life-style.

Macrofaunal assemblages from mud volcanoes in the Gulf of Cadiz

Desde a descoberta em 1999 do primeiro vulcão de lama no Golfo de Cádis, cerca de 40 locais, de profundidade variável entre os 200 e os 3900 m, com diferentes graus de emissão de hidrocarbonetos foram localizados e amostrados dentro do programa IOC-UNESCO “Training Through Research (TTR) “ e mais recentemente dentro do projecto europeu HERMES. Neste estudo investigamos as comunidades da macrofauna dos vulcões de lama do Golfo de Cádis utilizando uma diversidade de equipamento de amostragem quantitativo e não quantitativo. Mais de 14550 espécimes foram examinados e incluídos nos diferentes grupos taxonómicos, sendo fornecida uma lista taxonómica detalhada com o menor nível taxonómico possível. A biodiversidade, distribuição dos principais taxa, as espécies quimiossintéticas e a biodiversidade regional e substituição de espécies são apresentados e discutidos. Dentro da macrofauna, os bivalves (nomeadamente super-familia Thyasiroidea, espécies quimisimbióticos e comunidade de bivalves) e os ofiurideos são estudados em pormenor. Os Thyasiroidea colhidos nos vulcões de lama do Golfo de Cádis são revistos. Das sete espécies identificadas, apenas uma Thyasira vulcolutre. sp. nov se encontra associada a um ambiente quimiossintético. Esta espécie é restrita a locais activos, mas não se verificam padrões de distribuição para as outras espécies. Os bivalves quimiosimbióticos amostrados são revistos. Das 10 espécies fortemente associadas a ambientes quimiossintéticos duas Solemyidae, Petrasma elarraichensis sp. nov. e Acharax gadirae sp. nov., uma Lucinidae, Lucinoma asapheus sp. nov., e uma Vesicomyidae, Isorropodon megadesmus sp. nov. são descritas e comparadas com similares das respectivas famílias. As comunidades de bivalves foram analisadas em detalhe e do estudo de 759 espécimes (49 espécies em 21 familias) descreve-se a diversidade e padrões de distribuição. Os Ophiuroidea amostrados nos vulcões de lama e ambientes batiais adjacentes são revistos. Treze espécies são incluídas em 4 famílias, Ophiacanthidae, Ophiactidae, Amphiuridae e Ophiuridae e são identificadas, tendo sido descrita uma nova espécie Ophiopristis cadiza sp. nov. Rácios isotópicos (δ13C, δ15N, δ34S) foram determinados em várias espécies no intuito de investigar a ecologia trófica das comunidades bênticas dos vulcões do Golfo de Cádis. Os valores de δ13C para os bivalves Solemyidae, Lucinidae e Thyasiridae estão de acordo com os valores para outros bivalves conhecidos por possuírem simbiontes tiotróficos. Por outro lado os valores de δ13C e δ34S para Bathymodiolus mauritanicus sugerem a ocorrência de metanotrofia. A análise da fauna heterotrófica indica igualmente que as espécies habitantes da cratera dos vulcões de lama derivam a sua nutrição de fontes quimiossintéticas. A indicação pela análise isotópica que as bactérias autotróficas contribuem substancialmente para a nutrição dos bivalves hospedeiros, levou-nos a investigar os endossimbiontes e as suas relações filogenéticas relativamente a outros bivalves através da análise comparativa de análises de sequências de 16S ribossomal RNS. Análises moleculares PCR-DGGE (Denaturing Gradient Gel Electrophoresis) e clonagem de genes de bacterias 16S rRNA confirmaram a presença de simbiontes oxidantes de enxofre e colocam a possibilidade de uma simbiose dupla para o B. mauritanicus. A diversidade microbiana dentro dos Frenulata foi igualmente estudada recorrendo a métodos moleculares e revelou a não existência de padrão entre espécies, vulcões, profundidade e idade do animal sugerindo assim a não procura de simbiontes específicos.

Bauxite residue (Red mud) as a pulverised fuel ash substitute in the manufacture of lightweight aggregate

This study looked at the potential of bauxite residue or red mud to be used in the manufacture of lightweight aggregate in replacement of pulverised fuel ash (PFA), commonly used as a way of recycling problematic wastes. The percentage replacements of red mud with PFA were as follows: 25, 31, 38, 44 and 50%. These were blended in a mix with waste excavated clay and sewage sludge – all from the Chongqing municipality in China. Lightweight pellets were produced using a Trefoil rotary kiln and were sintered to 1200 °C. Results showed that 44 % bauxite residue replacement produced lightweight pellets with the highest compressive strength, highest density and largest water holding capacity. This would be expected in materials with a low level of silicates, which causes insufficient glass phase viscosity and therefore poor bloating during firing; producing an aggregate with a higher density but with open pores that allowed for larger water absorption. All ratios of red mud aggregates were significantly reduced in pH after firing to around pH 8, and this reduced the leachability of the aggregates to levels below those set by the European landfill directive (2003/33/EC).

Photograph - Unidentified Brick House

Black and white photographs, 19 cm x 24 cm of the exterior of an unidentified brick house. The photograph was taken by Wurts Brothers General Photographers of New York City (2 copies).

Photograph - Margaret Julia Band standing in front of a brick wall

A photograph of Margaret Julia Band standing in front of a brick wall with ivy or a tree growing in front. She is wearing a dress and gloves.

Sketch of John Gibson Brick Building

Sketch of John Gibson brick building and adjoining lots. This is a hand drawn sketch, n.d.