A química dos ésteres de fosfato

This work summarizes important aspects of the chemistry of phosphate esters, with special emphasis on: i) advances in the design of enzymatic models for phosphatases; and ii) nerve agents and currently used strategies for detoxification. The physical organic chemical aspects that are responsible by the reactivity of phosphate esters are also discussed.

Síntese e caracterização de alfa-fosfato de zircônio(IV) contendo agregados de cobre metálico

The alpha-zirconium (IV) hydrogenphosphate (alpha-ZrP) has received great attention in the last years due to its properties like ion exchange, intercalation, ionic conductivity and catalytic activity. This work reports a method to produce metallic copper clusters on alpha-ZrP to be used as catalysts in petrochemical processes. It was found that the solids were non-crystalline regardless of the uptake of copper and the reduction. The specific surface area increased as a consequence of the increase of the interlayer distance to accept the copper ions between the layers. During the reduction, big clusters of copper (0,5-11µ) with different sizes and shapes were produced.

A plasticidade dos amorfos: fazendo pigmentos brancos com fosfato de alumínio

A new white pigment made out of nano-structured non-crystalline aluminum phosphate was recently launched as an industrial product. Pigment opacifying properties are not intrinsic to aluminum phosphate but they arise as the result of a rare hollow particle nano-structure. This is in turn derived from the core-and-shell structure of amorphous aluminum phosphate precipitated under well-defined conditions. The new pigment is a product of the often neglected chemistry of non-crystalline ionic solids that can probably be a rich source of new successful products. The text describes a short account of the R&D activities, from the initial ideas to the present.

Estudo da influência dos íons K+, Mg2+, SO4(2-) e CO3(2-) na cristalização biomimética de fosfato de cálcio amorfo (ACP) e conversão a fosfato octacálcico (OCP)

The crystallization of hydroxyapatite (HA) in aqueous solution can be described by the mechanism ACP -> OCP -> HA. In this work, it was studied the influence of K+, Mg2+, SO4(2-) and CO3(2-) ions in the formation of ACP and in its conversion to OCP, using biomimetic coatings on metallic substrates of commercially pure titanium (Ti c.p.). The results showed that Mg2+ and CO3(2-) ions favored both the formation of ACP and its conversion to OCP. Differently, K+ and SO4(2-) ions did not influence the formation of ACP and, consequently, interfered in the conversion to OCP.

Inativação fotodinâmica de microrganismos

Photodynamic Therapy uses photosensitive dyes and visible light that, combined in the presence of oxygen, produce cytotoxic species that cause tumor death. Microorganisms such as bacteria, fungi, yeasts and viruses (including HIV) can also be inactivated by visible light after treatment with an appropriate photosensitizer as an alternative low cost treatment for localized infections, viral lesions such as acnes, and fungical skin lesions for example. Besides, Photodynamic Inactivation can be used for sterilization of blood and its subproducts for clinical use, in the treatment of drinking water as well as in antimicrobial detoxification of foods.

Síntese e modificações de derivados heterocíclicos de D-arabinose: potenciais inibidores de glicose-6-fosfato isomerase e de glicosamina-6-fosfato sintase

The synthesis of -5-(D-arabino-1,2,3,4-tetrahydroxybutyl)tetrazole and -2-(D-arabino-1,2,3,4-tetra-acetoxybutyl)-5-methyl-1,3,4-oxadiazole from D-arabinose is described. Attempts at removing the protecting groups of the oxadiazole derivative were unsuccessful, leading to products resulting from the opening of the oxadiazole ring. The unprotected tetrazole derivative was selectively phosphorylated at the primary hydroxyl group with diethylphosphoryl chloride. The resulting 5-[D-arabino-4-(diethylphosphoryloxy)-1,2,3-trihydroxybutyl]tetrazole is a protected form of a potential inhibitor of the enzymes glucose-6-phosphate isomerase and glucosamine synthase.

Estudo da adsorção de surfactante catiônico na matriz inorgânica fosfato de nióbio hidratado

This work describes the study the adsorption of a cationic surfactant, cetyl trimethyl ammonium bromide (CTAB) in the hydrous niobium phosphate matrix. The matrix was characterized by powder X-ray diffraction (DRX), thermal analysis (TG), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and surface area measurements (BET). The Langmuir and Freundlich isothermal models were used in the CTAB adsorption study. The adsorption process wasn`t favorable for the NbOPO4.nH2O in both studied models.

Adsorção de íons fosfato em óxido de nióbio hidratado

The adsorption kinetics of phosphate on Nb2O5.nH2O was investigated at initial phosphate concentrations 0.25, 0.50 and 1.00 mg.L-1. The kinetic process was described by a pseudo-second-order rate model very well. The adsorption thermodynamics was carried out at 298, 308, 318, 328 and 338 K. The positive values of both ΔH and ΔS suggest an endothermic reaction and increase in randomness at the solid-liquid interface during the adsorption. ΔG values obtained were negative indicating a spontaneous adsorption process. The Langmuir model described the data better than the Freundlich isotherm model. The effective desorption could be achieved using water at pH 12.

Sorção do inseticida tiametoxam em latossolos sob efeito de fosfato e vinhaça

Little information is available on the behavior of thiamethoxam in soils, whereas many studies show the effect of phosphate and vinasse in soils in Brazil. This study evaluated the sorption, desorption and retention of thiamethoxam in vinasse- and phosphate-amended samples of a dystrophic Red-Yellow Latosol (LVAd) and a distroferric Red Latosol (LVdf). The LVAd presented higher sorption of thiamethoxam. Phosphate did not affect the sorption or retention and vinasse increased the interaction of the compound with the soil particles, reducing desorption to the soil solution.

Tribocorrosão da liga TI6AL4V em solução salina tamponada com fosfato

The tribocorrosion behavior of Ti6Al4V alloy was investigated in a Phosphate Buffered Saline (PBS) solution by a reciprocating wear, using alumina ball as the counterface material, at different normal forces and sliding velocities. Dry wear experiments were performed in order to compare with the tribocorrosion experiments at open circuit potential and under anodic polarization. Dry wear induced a superior damage on the counterface, forming larger and shallower wear tracks compared with those experiments performed in PBS solution. The anodic current was increased by wear; however the volume of oxidized metal in tribocorrosion experiments correspond to a relative low percentage of the wear track volume.

Desenvolvimento e validação de método analítico por CLAE para a quantificação simultânea de dipropionato de betametasona e fosfato sódico de betametasona em suspensão injetável

A reversed-phase HPLC method was developed and validated to separate and simultaneously quantify the association of betamethasone sodium phosphate (BP) and betamethasone dipropionate (BD) in injectable suspensions. Chromatographic conditions were ternary gradient elution at 1.6 mL/min on a C18 column with 254 nm. The linearity of the method was established in the range 120 to 280 mg/mL BD, and 48 to 112 mg/mL BP. The RSD of intermediate precision of the method was <1% and recoveries were 99-101% for both drugs. The method proved selective, linear, precise, accurate and robust for quantifying BP and BD in commercial injectable suspensions.

Produção de biossurfactantes por microrganismos isolados de solo contaminado com óleo diesel

The aim of this work was to produce biosurfactants through submerged fermentation using microorganisms isolated from soil contaminated with diesel. Microorganisms were isolated, characterized by the production of biosurfactants, and used to study the influence of type, induction and concentration of ammonium sulfate as a nitrogen source in the culture medium. The microorganisms that showed best results, in terms of production of biosurfactants, were identified as being of the genus Pseudomonas and Bacillus. The biosurfactants produced proved capable of reducing the surface tension of the media to 39 mN/m and 34 mN/m, respectively. Higher biosurfactant production was obtained in the medium containing 1% soybean oil without ammonium sulfate.

Estudo de estabilidade do fosfato dissódico de prednisolona em condições de estresse oxidativo e térmico, em formulação oral

Este trabalho consistiu em investigar o processo de degradação do fármaco Fosfato Sódico de Prednisolona (FSP) na forma farmacêutica de solução oral por meio de ensaios de degradação, avaliando-se os parâmetros de acordo com a Resolução nº. 899/2003 da ANVISA e o processo de degradação do fármaco. O método por cromatografia líquida de alta eficiência (CLAE), desenvolvido para o doseamento do fármaco, foi validado a fim de comprovar sua aplicabilidade como indicativo de estabilidade, assegurando a confiabilidade do mesmo. Após o método ser validado no estudo da degradação do fármaco, comprovou-se que em condições drásticas de estresse oxidativo (H2O2 30%) e temperatura a 60°C, a degradação do fármaco é dependente de sua concentração (cinética de primeira ordem). Os resultados apresentaram-se satisfatórios, demonstrando que este método é adequado para investigação da formação de produtos de degradação na forma farmacêutica solução oral.

Atividade antagônica a microrganismos patogênicos por bactérias endofíticas isoladas de Echinodorus scaber Rataj

Os objetivos desse trabalho foram identificar e avaliar o potencial antagônico in vitro de bactérias endofíticas isoladas de Echinodorus scaber (chapéu de couro) sobre alguns patógenos e verificar sua capacidade de controlar o desenvolvimento de fungos em grãos de soja. Um total de 113 linhagens foi confrontado com cinco fungos patogênicos (método de cultura dupla), e quatro bactérias patogênicas (método de sobrecamada). O controle de crescimento de fungo em grãos de soja foi realizado por microbiolização e avaliado pelo método de papel de filtro. As bactérias antagonistas foram submetidas a teste de antibiose contra quatro bactérias patógenas. Duas linhagens inibiram os fungos Colletotrichum lindemunthianum, C. gloeosporioides, Corynespora cassiicula, Fusarium solani, Microsporum canis. No teste de antibiose contra as bactérias patogênicas somente (BREIII-107) apresentou atividade antagônica. As duas linhagens e foram identificadas como Bacillus sp (BREI-92) e Bacillus subitilis (BREIII-107). Quando inoculadas em grãos de soja, Bacillus sp (BREI-92) e Bacillus subitilis (BREIII-107) inibiram aproximadamente 100% do desenvolvimento de fungos sobre os grãos.

Pressurização da calda de pulverização na viabilidade de microrganismos entomopatogênicos

Avaliou-se a influência da pressurização da calda de pulverização na viabilidade dos seguintes microrganismos entomopatogênicos: o fungo Metarhizium anisopliae, a bactéria Bacillus thuringiensis var. kurstaki, o nucleopoliedrovirus de Anticarsia gemmatalis (AgMNPV) e o nematóide Steinernema glaseri. Utilizou-se do sistema hidráulico de um pulverizador, sem filtros, equipado com ponta de pulverização de jato cônico JA-2. O delineamento experimental adotado foi o inteiramente casualizado, com sete tratamentos: pressurização da calda em 172; 345; 517; 689; 1.034 e 1.379 MPa, e a testemunha (calda não submetida à pressurização). A avaliação da viabilidade de M. anisopliae foi realizada por meio da porcentagem de germinação dos conídios. Para B. thuringiensis, foi considerado o número de colônias. A eficácia do AgMNPV foi estimada indiretamente, pela mortalidade causada às lagartas de A. gemmatalis no início do terceiro instar, alimentadas com dieta artificial impregnada com suspensão viral. No caso do S. glaseri, foi calculada a porcentagem de indivíduos vivos em lâmina de Peters. Conclui-se que se podem pulverizar os entomopatógenos M. anisopliae, B. thuringiensis, AgMNPV e S. glaseri, até a pressão de 1.379 MPa, sem que haja perda na viabilidade desses organismos utilizados como agentes de controle biológico.