Movimento da massa cozida no interior de um tacho de cozimento

Curso de Tecnologia Sucroalcooleira. Disciplina de Tecnologia de Produção de Açúcar. Ilustração. Dimensão: 663x1024. tamanho: 80Kb.

Balanços de massa e energia na análise dos processos químicos

O item não apresenta o texto completo, pois está passando por revisão editorial

Avaliação da percentagem de massa gorda numa população pediátrica: comparação entre os métodos DXA e antropometria

Objectivo: Proceder à validação da equação de Slaugther e col., (1988), na estimação da percentagem de massa gorda (%MG), em crianças com 9 anos de idade, tendo a DXA como método de referência. Metodologia: A avaliação da composição corporal foi realizada em 450 crianças, das quais 219 eram raparigas (idade: 9.74 ± 0.33 anos; altura: 136.88 ± 6.8 cm; peso: 33.77 ± 8.16 kg; índice de massa corporal (IMC): 17.85 ± 3.16 kg/m2) e 231 eram rapazes (idade: 9.75 ± 0.33 anos; altura: 137.17 ± 6.97cm; peso: 34.3 ± 8.09 kg; IMC: 18.09 ± 3.17 kg/m2), pela DXA (QDR – 1500: Hologic, Waltham, MA, pencil beam mode, software version 5.67 anhanced whole body analisis) e pelas pregas adiposas subcutâneas, cujo os valores das pregas adiposas tricipital e geminal foram utilizados na equação desenvolvida por Slaugther e col., (1988). Na análise estatística, foram utilizadas a comparação de médias, a regressão linear e a concordância entre os métodos. Resultados: A %MG obtida por ambos os métodos apresentou diferenças significativas (p<0.05) entre os géneros, sendo as raparigas as que apresentam, em média, maiores valores de gordura corporal. Tanto para os rapazes como para as raparigas a %MGDXA é superior à %MGSKF. Na predição dos valores de %MG, a equação de Slaugther e col., (1988) tem para ambos os sexos (raparigas: r=0.94; EPE=3.2 e rapazes: r=0.96; EPE=2.7) uma correlação elevada com reduzido erro padrão de estimação com a DXA. Na análise de concordância entre os métodos, os rapazes parecem apresentar uma maior concordância entre o método alternativo e o método de referência, com os limites de concordância a variarem entre -9.26 e 1.57, enquanto nas raparigas variam entre -11.19 e 3.16. Em ambos os sexos é visível a subestimação, em valor médio, do método de referência, com uma média da diferença a situar-se nos -3.8% e -4.0%, respectivamente para rapazes e raparigas. Discussão: A equação de Slaugther e col., (1988) explica, para as raparigas, 87.5% da variância do método de referência, enquanto nos rapazes, 91.3% da variância é explicada.A diferença entre os métodos alternativo e de referência está dependente do nível de adiposidade, sendo que o método alternativo tende a sobrestimar a %MG nas crianças mais magras e a subestimar nas mais gordas. A equação de Slaugther e col., (1988) apresentou uma validade aceitável na avaliação da composição corporal num grupo de crianças, constituindo uma alternativa rápida na estimação da composição corporal numa avaliação inicial em escolas, clubes e estudos de larga escala. Contudo a sua utilidade, para uma correcta intervenção na saúde da criança, pode apresentar uma validade limitada, pelo que pode ser justificada a utilização de um método mais válido em termos clínicos, como a DXA.

Relação entre a actividade física e inactividade física, envolvimento físico, comportamentos alimentares e percentagem de massa gorda: um estudo comparativo entre duas amostras da R.A.M. e da R.A.A.

Os padrões baixos de Actividade Física (AF), com aumento de tempo em actividades sedentárias (ActSed), num envolvimento natural (EnvN) desafiador e um elevado consumo de alimentos processados (AliPro) e de bebidas açucaradas (BeAçu), são factores responsáveis pelo aumento da obesidade nos jovens. Este trabalho tem por objectivo caracterizar os alunos do 7º ano de escolaridade, de duas escolas: Região Autónoma da Madeira (R.A.M.) e outra nos Açores (R.A.A.), bem como estudar as relações entre as variáveis AFg, ActSed, EnvN, o consumo dos AliPro e de BeAçu, e os indicadores de adiposidade. O total da amostra consistiu em 337 alunos (164 rapazes e 173 raparigas), sendo 123 da escola da R.A.A. e 214 da escola da R.A.M., ambas de um meio medianamente urbano. Os participantes preencheram questionários acerca da AF (Crocker, Bailey, Faulkner, Kowalski & McGrath, 1997), percepção de envolvimento físico (Evenson et al., 2006), ActSed e consumo alimentar (Wilson, Magarey & Mastersson, 2008). Foi efectuada a avaliação ao nível do peso, altura e pregas de adiposidade tricipital e geminal (Cooper, 2007). A %MG foi calculada segundo a fórmula de Slaughter et al.(1988) e os participantes classificados segundo as categorias de Lohman (1987). Os alunos reportaram resultados baixos nos níveis de AF, e em média um dispêndio de 3 horas por dia em ActSed. Cada participante afirma consumir aproximadamente 3 AliPro e 1 BeAçu por dia. No parâmetro da %MG, os resultados de ambas as escolas foram considerados alarmantes. Foram encontradas diferenças não significativas, entre as duas escolas, nos parâmetros de AF, ActSed, consumo de AliPro e BeAçu, EnvN e %MG (p> 0,05). Correlações moderadas entre as ActSed e o consumo de BeAçu; e fracas entre o EnvN, BeAçu e AliPro, e AliPro com o IMC e %MG. Em suma, ocorrem necessidades de hábitos de AF para a prevenção da obesidade.

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

Ação Sacietogênica de um inibidor de tripsina da semente de tamarindo (Tamarindus indica L.)

The seeds are excellent sources of proteinase inhibitors and have been highlighted owing to various applications. Among these applications are those in effect on food intake and weight gain that stand out because of the increasing number of obese individuals. This study evaluated the effects of trypsin inhibitor present in the seed of tamarind (Tamarindus indica L.) reduction in weight gain, biochemical and morphological alterations in Wistar rats. For this, we partially purified a trypsin inhibitor tamarind seed. This inhibitor, ITT2 at a concentration of 25 mg / kg body weight, over a period of 14 days was able to reduce food intake in rats (n = 6) by approximately 47%, causing a reduction in weight gain approximately 70% when compared with the control group. With the evaluation of the in vivo digestibility was demonstrated that the animals lost weight due to satiety, presented by the reduction of food intake, since there were significant differences between true digestibility for the control group (90.7%) and the group treated with inhibitor (89.88%). Additionally, we checked the deeds of ITT2 on biochemical parameters (glucose, triglycerides, total cholesterol, high-density lipoprotein, low-density lipoprotein, glutamic-pyruvic transaminase, glutamic oxaloacetic transaminase, gamma glutamyl transferase albumin, globulin, total protein and C-reactive protein) and these, when assessed in the study groups showed no statistically significant variations. We also evaluate the histology of some organs, liver, stomach, intestine, and pancreas, and showed no changes. And to evaluate the effect of trypsin inhibitor on food intake due to the satiety is regulated by cholecystokinin (CCK) were measured plasma levels, and it was observed that the levels of CCK in animals receiving ITT2 were significantly higher ( 20 + 1.22) than in animals receiving only solution with casein (10.14 + 2.9) or water (5.92 + 1.15). Thus, the results indicate that the effect caused ITT2 satiety, reducing food intake, which in turn caused a reduction in weight gain in animals without causing morphological and biochemical changes, this effect caused by the elevation of plasma levels CCK

Influência do lodo de ETE na massa para fabricação de cerâmica vermelha

The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible

Efeito da adição de carbonatos em formulação de massa para revestimento cerâmico utilizando matérias-primas do Piauí

Piauí state is a major producer of traditional red ceramic burning as bricks, tiles and ceramic tiles, with its main production center located in the city of Teresina. The state has large reserves of raw materials that can be used in the ceramic coating as clays, quartz, talc and carbonates. However, in the preparation of ceramic bodies using only a mixture of clays with different characteristics. The study aims to evaluate the effect of adding two types of carbonates in the ceramic semiporous mass coating produced in Piauí and then to verify the potential use of these carbonates as supplementary raw material product manufactured or the feasibility of obtaining a ceramic plate that meets the specifications for the porous coating. For this, were characterized the ceramic Piauí coating mass, a calcitic carbonate and a dolomitic, were made in the levels of 2, 4, 8, 16, and 32%. The masses were formed by pressing and burneds in two environments: a laboratory furnace (1080°C, 1120°C, 1140°C, and 1160°C) and an industrial furnace (1140°C). Then, following tests of linear shrinkage water absorption, apparent porosity, bulk density and flexural strength. Furthermore, the fired specimens were tested for their macrostructure and microstructure. The results showed the possibility of using the carbonate in ceramic mass flooring produced in Piauí, as added in small proportions improved dimensional stability and increased mechanical strength of ceramics pieces. It also proved itself possible to produce porous coating when added in higher levels

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Análise fractal da vasculatura arteriolar e venular da retina em pessoas sem doença ocular

Although it has been suggested that retinal vasculature is a diffusion-limited aggregation (DLA) fractal, no study has been dedicated to standardizing its fractal analysis . The aims of this project was to standardize a method to estimate the fractal dimensions of retinal vasculature and to characterize their normal values; to determine if this estimation is dependent on skeletization and on segmentation and calculation methods; to assess the suitability of the DLA model and to determine the usefulness of log-log graphs in characterizing vasculature fractality . To achieve these aims, the information, mass-radius and box counting dimensions of 20 eyes vasculatures were compared when the vessels were manually or computationally segmented; the fractal dimensions of the vasculatures of 60 eyes of healthy volunteers were compared with those of 40 DLA models and the log-log graphs obtained were compared with those of known fractals and those of non-fractals. The main results were: the fractal dimensions of vascular trees were dependent on segmentation methods and dimension calculation methods, but there was no difference between manual segmentation and scale-space, multithreshold and wavelet computational methods; the means of the information and box dimensions for arteriolar trees were 1.29. against 1.34 and 1.35 for the venular trees; the dimension for the DLA models were higher than that for vessels; the log-log graphs were straight, but with varying local slopes, both for vascular trees and for fractals and non-fractals. This results leads to the following conclusions: the estimation of the fractal dimensions for retinal vasculature is dependent on its skeletization and on the segmentation and calculation methods; log-log graphs are not suitable as a fractality test; the means of the information and box counting dimensions for the normal eyes were 1.47 and 1.43, respectively, and the DLA model with optic disc seeding is not sufficient for retinal vascularization modeling

Caracterização morfológica de três genótipos de umezeiro selecionados como porta-enxertos para pessegueiro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Acúmulo de massa seca e de macronutrientes por plantas de Glycine max e Solanum americanum

A soja é uma das principais culturas agrícolas do Brasil, sendo a sua produtividade muito influenciada pela competição exercida pelas plantas daninhas. Foram realizados dois experimentos em casa de vegetação, em Jaboticabal, SP, objetivando determinar o acúmulo de massa seca, assim como a distribuição e o acúmulo de macronutrientes em plantas de soja, no período de outubro de 2000 a fevereiro de 2001, e de Solanum americanum, no período de janeiro a maio de 1995. As plantas cresceram em vasos com capacidade de 7 litros, preenchidos com areia de rio lavada e peneirada; elas foram irrigadas diariamente com solução nutritiva. Os tratamentos foram representados pelas épocas de amostragem, realizada a intervalos de 14 dias, iniciando-se 21 dias após a emergência (DAE), até 161 DAE para S. americanum e 119 DAE para soja cv. BR-16 (precoce). O ponto de máximo acúmulo teórico de massa seca deu-se aos 104 DAE para a soja (35,0 g por planta) e 143 DAE para S. americanum (179,62 g por planta). da emergência até 49 e 63 DAE, as folhas apresentaram maior participação no acúmulo de massa seca para soja e S. americanum, respectivamente. Após esses períodos, verificou-se, em ambas as espécies, inversão na representatividade das folhas por caules para a espécie daninha e por caules e, posteriormente, por estruturas reprodutivas, para a cultura. A taxa de absorção diária dos macronutrientes atingiu maiores valores entre 69 e 87 DAE para a soja e entre 105 e 119 DAE para a planta daninha. Considerando a média dos valores de pontos de inflexão observados para a cultura da soja, tem-se que aos 75 DAE uma planta de soja acumula teoricamente 23,9 g de massa seca, 564,4 mg de N, 7,1 mg de P, 490,8 mg de K, 487,0 mg de Ca, 156,6 mg de Mg e 36,0 mg de S. Para o mesmo período, uma planta de S. americanum acumula teoricamente 33,75 g de massa seca, 875,96 mg de N, 88,46 mg de P, 983,54 mg de K, 647,60 mg de Ca, 100,93 mg de Mg e 42,15 mg de S.

Aspectos morfológicos do fruto, da semente e desenvolvimento pós-seminal de faveira (Clitoria fairchildiana R. A. Howard. - Fabaceae)

O presente trabalho teve por objetivo descrever a morfologia dos frutos, das sementes e o desenvolvimento pós-seminal de faveira (Clitoria fairchildiana R. A. Howard. - Fabaceae). Os frutos e as sementes foram caracterizados quanto à forma e dimensões. Periodicamente, unidades representativas de cada fase de germinação foram retiradas para as descrições morfológicas. Os frutos são do tipo legume, deiscentes e de coloração marrom. As sementes são exalbuminosas, de forma orbicular e achatada, com tegumento de coloração castanho-esverdeada. O hilo tem forma elíptica, homocromo e de tamanho pequeno em relação à semente. Os cotilédones são livres, de coloração verde, maciços e plano-convexos e o embrião é invaginado. O início do desenvolvimento pós-seminal é marcado pelo rompimento do tegumento e emissão da raiz primária, glabra, de coloração amarelo-esverdeada e de forma cilíndrica. Posteriormente, observa-se o desenvolvimento das raízes secundárias, levemente esbranquiçadas, curtas e filiformes. em seguida, o crescimento do hipocótilo proporciona a emergência dos cotilédones e da plúmula acima do substrato. O epicótilo alonga-se e, em seguida, observa-se a expansão dos eófilos, simples, opostos, com tricomas simples e esparsos, pecíolos curtos com estípulas em sua base. Posteriormente ao desenvolvimento dos eófilos, ocorre a formação do segundo par de folhas, alternas, trifolioladas, estipuladas e com estipelas na base dos peciólulos.