Mapeamento digital de análogos a reservatórios petrolíferos: exemplos para depósitos fluviais da Unidade Açu-3 - Bacia Potiguar

In the current work are presented the results about the study of digital mapping of analogs referents the fluvial oil reservoirs in the Açu Formation. With the regional recognizing in the south corner of Potiguar Basin was selected a area of 150 Km square in the west of Assu city. In this area was chosen the outcrops for the digital mapping and from the data fields and remote sensors were done the depositional architectural for the fluvial deposits, which it was named coarse meandering fluvial systems. In the deposits were individualized 3 (three) fluvial cycles, which they was separated by bounding surface of fifth order. Such cycles are preferentially sandy, with fining-upward sequence finished in flood plain deposits. Inner of the sandy levels of the filling channels were characterized least cycles, normaly incomplete, constituted by braided sandy bodies and bounding surfaces of fourth order. In the mapped area was chosen a outcrop with great exposition, where it was possible to see tipical deposits of filling channel and was in this outcrop that was done the digital mapping. In this outcrop was used diverse technics and tools, which they integrated sedimentological, altimetric (GPS, Total Station), LIDAR (Light Detection and Ranging), digital photomosaic of high resolution and of the inner geometries (Ground Penetration Radar) data sets. For the integrating, interpretation and visualization of data was used software GoCAD®. The final product of the outcrop digital mapping was the photorealistic model of part of the cliff (or slope) because the observed reflectors in the radargrams were absents. A part of bar oblique accretion was modeled according to GPR gride of 200x200 meters in the alluvial Assu river probable recent analog. With the data of inner geometries was developed the three-dimentional sedimentary architectural, where it was possible characterize sand sheet deposits and many hierarchy of braided channels. At last, simulations of sedimentary geometries and architectures of the Potiguar Basin Fluvial Reservoirs were done with PetBool software, in order to understand the capacity of this program in simulations with a lot of numbers of conditioning wells. In total, 45 simulations was acquired, where the time and the channel numbers increase in relation of the conditioning wells quantity. The deformation of the meanders was detected from the change of simulated dominion dimensions. The presence of this problem was because the relationship between the simulated dominion and the width of the meander

Mapeamento da zona costeria protegida por arenitos de praia (Beachrocks) em Nísia Floresta - RN

The goal of this work comprises the detailed mapping of the coastal zone of the south coast of the State of Rio Grande do Norte. The emphasis of the study is the units of beachrocks and the features of the physical environment associated. The mapping of the beachrocks and of the adjacent coastal features is justified, among other aspects, by the fact that the beachrocks constitute an important protection agent against the sea erosion. By one side, they dissipate the energy of the sea waves and make possible the imprisonment of sediments in the foreshore. The beachrocks in the studied area are constituted of discontinuous strips, parallel to the coast line presenting emerged in some places, even in the highest tides, entirely submerged or partially buried by coastal sediments. These sandstones compose the landscape of big part of the coast and they are responsible for the partial dissipation of the energy of the waves on the studied coast. The methodology used in this work consisted of different techniques were used, as the use of aerial pictures of small format (FAPEFs), acquisition of data of system of global positioning (GPS) and later elaboration of thematic maps and of digital models of soil (MDTs). The results obtained in the mapping of the use and occupation of the soil, demonstrate the existence of strong human pressure in the coastal area (built lots and no built), occupying about 54,74% of built areas. This problem has been taking to degradation risks due to the inconsequent expansion of divisions into lots and tourist enterprises. The MDT came as an excellent resource, as visual as functional, being possible to visualize several angles and to act in three dimensions the relief of the area in study, as well as to identify the present features in the coastal area. By the importance of the bodies of beachrocks as a protection agent against the coastal erosion, faces were delimited in the sandstones based in geometric criteria, classifying them in, central face, outside face, inside face, break and undermiming. These last two associates to the erosion and washout in the base of these bodies. Field data indicate clearly that the most important process in the fracturing of the bodies is associated with mechanisms related to the gravity, being the joints formed by processes of gravitational sliding. Finally, the mapping of the coastal zone starting from aerial pictures of small format it made possible the identification of the elements that compose the beach strip, for accomplishing with larger detailed level and by presenting a better monitoring of the dynamics of the coastal zone

Ecologia da paisagem: mapeamento da vegetação da Reserva Biológica da Serra do Japi, Jundiaí, SP, Brasil

Foi realizado o mapeamento da vegetação da Reserva Biológica (REBIO) Municipal da Serra do Japi, Jundiaí, SP, por meio de fotointerpretação analógica, em escala 1:30.000. O mapa foi digitalizado e transferido para computador pelo sistema de informação geográfica (Idrisi) e posteriormente para o programa Corel Draw. Foram identificadas, mapeadas e descritas oito unidades de paisagem (UP) sendo três antrópicas (solo exposto, campo antrópico e reflorestamento homogêneo) e cinco naturais (floresta estacional semidecidual montana dossel uniforme - microfanerófitos; floresta estacional semidecidual montana dossel uniforme - mesofanerófitos; floresta estacional semidecidual montana dossel emergente; floresta estacional semidecidual aluvial dossel emergente e refúgio montano arbustivo). As unidades naturais somaram 98,46% do total dos 2.071,20 ha da área, indicando que a Reserva vem cumprindo seu papel na preservação do ecossistema em questão. No entanto, como algumas unidades não tem expressiva representatividade na área, e como existe grande extensão de floresta no entorno da Reserva, sugere-se a ampliação e a transformação da mesma em uma unidade que contemple inclusive a visitação pública como forma de auxiliar no processo de conservação. Sugere-se que a área seja transformada em parque estadual, cujo nome poderia ser Parque Estadual da Serra do Japi.

Metodologia integrada para mapeamento de falhas: uma proposta de utilização conjunta do mapeamento de processos com as técnicas FTA, FMEA e a análise crítica de especialistas

As falhas representam não conformidades nas atividades produtivas, de tal modo que pesquisas para seu controle e prevenção são, no mínimo, desejáveis. Na literatura sobre o assunto, observa-se uma gama variada de técnicas, porém, quase sempre, usadas isoladamente e, em poucos casos, no setor de serviços. Observando essa lacuna, propõe-se uma metodologia de Mapeamento de Falhas que integra diferentes abordagens que se complementam, aproveitando-se o potencial e o benefício de cada técnica para análise e controle de falhas. Para a consecução dessa proposta, efetuou-se uma pesquisa bibliográfica para conceituação e entendimento das técnicas utilizadas, um estudo e análise de integração dessas técnicas e, por fim, um exemplo real de aplicação em processo notarial de serviço, tema este ainda não explorado na literatura pertinente e, portanto, bastante auspicioso. Como resultado, observa-se uma ferramenta que permite uma visualização completa e objetiva das atividades desencadeadas pelos processos, seus pontos críticos e suas potenciais falhas, podendo ser aplicada com propriedade em empresas de prestação de serviços.

Análise de textos didáticos de Matemática: um mapeamento e uma proposta metodológica fundada numa perspectiva hermenêutica

This article discusses some methodological possibilities for analyzing textbooks in Mathematics Education. Its starting point was a review - which allowed us to build a general map - of the production developed by consolidated Research Groups that deal with this theme in Brazil. This map allowed us to propose a complementary/alternative guide to analyse textbooks according to a hermeneutical approach.

Mapeamento das formacoes superficiais da Regiao de Sao Pedro- Piracicaba (SP, Brasil).

As criteria in photointerpretation slope features, tonality, texture, structure, vegetation density and gullies were utilized. The origin of the surficial formations is related to the weathering, erosion and deposition processes and little diagenesis.-after English summary

Similaridade geometrica de bacias hidrograficas e o mapeamento de solos.

The following soil classes were identified in the studied area: Quartz Sands (AQ), Yellow Red Podzolic, Dusky Red Latosol (LR), 'Terra Roxa estruturada' (TE), Lithosol substrate sandstone (Lia) and Hidromorphic (Hi). The dimensional analysis method allowed: a) to group the watershed whose percentage (60%) are showing predominance of the same soil (Quartz Sands) and which located in the same relief; b) to group watersheds with different soil classes, but with similar percentages. -from English summary

Mapeamento de solos atraves de imagens de radar e de satelite.

The objective of the present work was the improvement of the methodology for soil mapping through the drainage network with the aid of Landsat data. The drainage network of the area studied was delineated and the soils identified. The main problem of the method has been the characterization of the contact between soil units when it is not abrupt, and in this case field trips and the analysis of the relief has been used to solve doubts.-from English summary

Identificacao e mapeamento de areas de maior eficiencia fotossintetica para a cana-de-acucar

The objective was the study of better areas for sugar cane exploitation, using variables related to the classes and exposition of slopes, edaphic and climatic variables. Data were analysed with the aid of a Geographic Information System supported by 8 bit microcomputer, and maps of North exposition, photosynthetically the most efficient, were produced for different gradients of slope. These maps combined with traditional maps can be a very helpful tool to planners. -from English summary

Identificacao e mapeamento de areas de desertificacao sob clima umido no Brasil

Environmental management mistakes are now strongly affecting some areas such as the agricultural areas of the southwest of the State of Rio Grande do Sul. The sandy soils in this region are adequate for the beefcattle activity, but ignoring technical reports great incentive was given to the soybean culture. The result was a very fast degradation of the arable layer and several places are considered real small deserts. The objective of this work is the mapping of these areas as well instable areas and gathering all the technical measures which were suggest for the land reclamation. -from English summary

Mapeamento do contorno estrutural do embasamento da bacia sedimentar de Curitiba - PR

The sedimentary Curitiba basin is located in the Central-Southern part of the first Parananense plateau, and comprises Curitiba (PR), and part of the neighbour Municipalities (fig.1). It is supposed to be of Plio-Pleistocene age. It has a shallow sedimentary fulfillment, represented by the Guabirotuba formation (BIGARELLA and SALAMUNI, 1962) which is dristributed over a large area of about 3.000km2. The internal geometry, not entirely known yet, is actually object of detailed research, that shows its geological evolution to Cenozoic tectonic movements. For the purpose of this study the definition of the structural contour of the basement and their depo-centers is fundamental. This paper presents the results of the integration of surface and subsurface data, processed by statistical methods, which allowed a more precise definition of the morphostructural framework of the basement. For the analysis of the geological spacial data, specific softwares were used for statistical processing for trend surfaces analysis. The data used in this study are of following types: a) drilling logs for ground water; b) description of surface points of geological maps (CRPM, 1977); c) description of points of geotechnical drillings and down geological survey. The data of 223 drilling logs for ground water were selected out of 770 wells. The description files of 700 outcrops, as well as planialtimetric field data, were used for the localization of the basement outcrop. Thus, a matrix with five columns was set up: utm E-W (x) and utm N-S (y); surface altitude (z); altimetric cote of the contact between sedimentary rocks and the basement (k); isopachs (l). For the study of the basement limits, the analysis of surface trends of 2(nd) and 3(rd) degree polinomial for the altimetric data (figs. 2 and 3) were used. For the residuals the method of the inverse of the square of the distance (fig.4) was used. The adjustments and the explanations of the surfaces were made with the aid of multiple linear regressions. The analysis of 3rd degree polinomial trend surface (fig.3) confirmed that the basement tends to be more exposed towards NNW-SSE explaining better the data trend through an ellipse, which striking NE-SW and dipping SW axis coincides with the trough of the basin observed in the trending surface of the basement. The performed analysis and the respective images offer a good degree of certainty of the geometric model of the Curitiba Basin and of the morphostructure of its basement. The surface trend allows to sketch with a greater degree of confidence the structural contour of the topgraphic surface (figs. 5 and 6) and of the basement (figs. 7 and 8), as well as the delimitation of intermediate structural heights, which were responsible for isolated and assymmetric depocenters. These details are shown in the map of figures 9 and 10. Thus, the Curitiba Basin is made up by a structural trough stretching NE-SW, with maximum preserved depths of about 80m, which are separated by heights and depocenters striking NW-SE (fig. 11). These structural features seems to have been controlled by tectonic reactivation during the Tertiary (HASUI, 1990) and which younger dissection was conditioned by neotectonic processes (SALAMUNI and EBERT, 1994).

Sistema de Informações Geográficas para o Mapeamento e Controle do Crime: Proposta para o Município de Feira de Santana, Bahia

The mapping crime using a Geographical Information System (SIG), besides a scientific activity, is an intelligent strategy of violence figthing, constituted in a base of information for discerning analysis of data, for better understanding and control of criminal action. This proposal of a GIS, for the region of Feira de Santana, State of Bahia - Brazil, shows how the mapping crime can be carried through a set of computational tools composed of hardware and software, through space information, in the study of its causes, consequences and ways for its control.

Mapeamento do uso da terra, vegetação e impactos ambientais por meio de sensoriamento remoto e geoprocessamento

The mapping of the land use, vegetation and environmental impacts using remote sensing ana geoprocessmg allow detection, spatial representation and quantification of the alterations caused by the human action on the nature, contributing to the monitoring and planning of those activities that may cause damages to the environment. This study apply methodologies based on digital processing of orbital images for the mapping of the land use, vegetation and anthropic activities that cause impacts in the environment. It was considered a test area in the district of Assistência and surroundings, in Rio Claro (SP) region. The methodology proposed was checked through the crossing of maps in the software GIS - Idrisi. These maps either obtained with conventional interpretation of aerial photos of 1995, digitized in the software CAD Overlay and geo-referenced in the AutoCAD Map, or with the application of digital classification systems on SPOT-XS and PAN orbital images of 1995, followed by field observations. The crossing of conventional and digital maps of a same area with the CIS allows to verify the overall results obtained through the computational handling of orbital images. With the use of digital processing techniques, specially multiespectral classification, it is possible to detect automatically and visually the impacts related to the mineral extraction, as well as to survey the land use, vegetation and environmental impacts.

Mapeamento da produtividade e perímetro do tronco de clones de seringueira em argissolo vermelho amarelo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Variabilidade temporal e mapeamento dos dados climáticos de Botucatu-SP

O trabalho teve objetivo estudar a variabilidade temporal da temperatura do ar, precipitação pluviométrica e umidade relativa do ar na cidade de Botucatu-SP, Brasil, utilizando técnicas geoestatísticas. Os dados de precipitação pluviométrica, temperatura do ar e umidade relativa do ar utilizados no presente estudo são provenientes da Estação Meteorológica da Fazenda Lageado, da Faculdade de Ciências Agronômicas-UNESP. As observações foram realizadas no período de 1988 a 2007, referem-se ao total mensal de precipitação pluvial expressa em altura de lâmina d'água (mm), médias mensais de temperatura em ºC e umidade relativa em %. Os dados foram avaliados por meio da estatística clássica e geoestatística. As variáveis climáticas tiveram sua dependência verificada por variogramas, apresentando dependência temporal maior que 76%. A série temporal de umidade relativa do ar foi a que apresentou maior alcance (8,67 meses) e, conseqüentemente, maior estabilidade climática. O conhecimento da distribuição temporal das variáveis climáticas é importante para o estudo e realização do zoneamento agroclimático, bem como para o dimensionamento do sistema de irrigação das culturas.