On the occurrence of cyanolipids In Paullinia carpopodea cambess And P. cupana Kunth seed oils

Paullinia carpopodea seed oil contains 70% type Icyanolipids with cyanogenetic properties, as proven by chemical and spectrometric techniques. P. cupana seed oil also contains cyanogenic type I cyanolipids, according to its 1Ή-NMR spectrum. The existing controversy in the literature about the presence and/or type of cyanolipids in P. cupana seed oil is probably due to the low amount of these compounds (0.2%) in the seeds.

Bacterial cellulose as a novel substrate for retinal pigment epithelium cells transplantation in age-related macular degeneration

Tese de Doutoramento em Engenharia Química e Biológica.

Removal of Erythrosine B dye from water effluents using crop waste pumpkin seed hulls as adsorbent

Erythrosine B is widely used for coloring in various applications, especially in the food industry, despite its already proved toxicity and carcinogenicity. The agrowaste pumpkin seed hulls were applied as potential adsorbent for the removal of Erythrosine from aqueous solutions. Adsorption mechanism and kinetics were analyzed for design purposes. The seed hulls were characterized by specific techniques before and after dye retention. It was found that the attachment of Erythrosine B molecules on adsorbent surface may be attributed to the interactions between carboxyl and/or carbonyl groups of both dye and agrowaste wall components. A univariate approach followed by a factorial design was applied to study and analyze the experimental results as well as to estimate the combined effects of the process factors on the removal efficiency and dye uptake. Adsorption mechanism may be predominantly due to intraparticle diffusion, dependent on pore size. The four equilibrium models applied fitted the data well; the maximum adsorption capacity for Erythrosine was 16.4 mg/g. The results showed that adsorbent is effective for Erythrosine B removal for a large concentration range in aqueous solutions (5400 mg/L) in batch systems.

Taxonomic relevance of seed and seedling morphology in two Amazonian species of Entada (Leguminosae)

We carried out a comparative morphological study to evaluate the taxonomic value of seed and seedling traits of Entada polystachya and E. simplicata (Leguminosae, Mimosoideae, Mimoseae). Seeds of both species were collected from wild populations in Roraima State, Brazil. Our results show consistent quantitative and qualitative differences between these species regarding their seeds and seedlings. Testa fracture lines, funiculus impression, lens characters, radicle shape and length, and cotyledon lobes length, seedling morphology group, number of pinnae at first node, and hypocotyl length permit a straightforward distinction of E. polystachya from E. simplicata, supporting a recent treatment of the latter taxon as a distinct species, endemic to Roraima State, northern Amazonia, Brazil.

A novel small-caliber bacterial cellulose vascular prosthesis: production, characterization, and preliminary in vivo testing

Vascular grafts are used to bypass damaged or diseased blood vessels. Bacterial cellulose (BC) has been studied for use as an off-the-shelf graft. Herein, we present a novel, cost-effective, method for the production of small caliber BC grafts with minimal processing or requirements. The morphology of the graft wall produced a tensile strength above that of native vessels, performing similarly to the current commercial alternatives. As a result of the production method, the luminal surface of the graft presents similar topography to that of native vessels. We have also studied the in vivo behavior of these BC graft in order to further demonstrate their viability. In these preliminary studies, 1 month patency was achieved, with the presence of neo-vessels and endothelial cells on the luminal surface of the graft.

Investigation on the homogeneity and stability of aqueous nano cellulose suspensions prepared using pluronic F-127

This paper presents the results of experimental investigation on the aqueous dispersion behaviour of micro crystalline cellulose (MCC) prepared using Pluronic F-127. For this purpose, different concentrations (0.5-3.0 wt.%) of MCC were dispersed in water with the help of ultrasonication technique using various concentrations of Pluronic F-127. The homogeneity of the suspensions and agglomerations were characterized by optical and transmission electron microscopy and the concentration of well dispersed MCC was measured using UV-Vis spectroscopy. Also, the suspensions were subjected to high speed ultracentrifugation at 3000 rpm and observed visually for sedimentation and subsequently, concentration was calculated using UV-Vis, in order to assess the long term stability of the suspensions. Based on these experiments, optimum concentration of Pluronic to disperse different MCC concentrations has been suggested.

Acetylated bacterial cellulose coated with urinary bladder matrix as a substrate for retinal pigment epithelium

This work evaluated the effect of acetylated bacterial cellulose (ABC) substrates coated with urinary bladder matrix (UBM) on the behavior of Retinal Pigment Epithelium (RPE), as assessed by cell adhesion, proliferation and development of cell polarity exhibiting transepithelial resistance and polygonal shaped-cells with microvilli. Acetylation of bacterial cellulose (BC) generated a moderate hydrophobic surface (around 65°) while the adsorption of UBM onto these acetylated substrates did not affect significantly the surface hydrophobicity. The ABS substrates coated with UBM enabled the development of a cell phenotype closer to that of native RPE cells. These cells were able to express proteins essential for their cytoskeletal organization and metabolic function (ZO-1 and RPE65), while showing a polygonal shaped morphology with microvilli and a monolayer configuration. The coated ABC substrates were also characterized, exhibiting low swelling effect (between 1.52.0 swelling/mm3), high mechanical strength (2048 MPa) and non-pyrogenicity (2.12 EU/L). Therefore, the ABC substrates coated with UBM exhibit interesting features as potential cell carriers in RPE transplantation that ought to be further explored.

Removal of tetracycline from contaminated water by Moringa oleifera seed preparations

The aim of this study was to evaluate tetracycline antibiotic (TA) removal from contaminated water by Moringa oleifera seed preparations. The composition of synthetic water approximate river natural contaminated water and TA simulated its presence as an emerging pollutant. Interactions between TA and protein preparations (extract; fraction and lectin) were also evaluated. TA was determined by solid phase extraction followed by high performance liquid chromatography - mass spectrometry. Moringa extract and flour removed TA from water. Extract removed TA in all concentrations and better removal (40%) was obtained with 40 mg L1; seed flour (particles < 5mm), 1.25 g L1 and 2.50 g L1 removed 28 and 29% of tetracycline, respectively; particles > 5 mm (0.50 g L1) removed 55% of antibiotic. Interactions between TA and seed preparations were assayed by haemagglutinating activity (HA). Specific HA (SHA) of extract (pH 7) was abolished with tetracycline (5 mg L1); fraction (75%) and lectin HA (97%) were inhibited with TA. Extract SHA decreased by 75% at pH 8. Zeta potential (ZP) of extract 700 mg L1 and tetracycline 50 mg L1 , pH range 5 to 8, showed different results. Extract ZP was more negative (10.73 mV to 16.00 mV) than tetracycline ZP (0.27 mV to 20.15 mV); ZP difference was greater in pH 8. The focus of this study was achieved since moringa preparations removed TA from water and compounds interacting with tetracycline involved at least lectin binding sites. This is a natural process, which do not promote environmental damage.

A spin-offs journey into achieving marketable products from bacterial cellulose

[Excerpt] Academic spin-offs, technological ventures born inside Universities, have increasingly strengthen the connections between the scholarship and the economy, by fostering the role of technology transfer and knowledge commercialization. This presentation will outline the major steps in taking an idea or a technology to market, growing the venture and aiming at securing a successful exit. Also, it will present BCTechnologies (Bacterial Cellulose Technologies), a spin-off from the University of Minho (Portugal). (...)

Cutinase promotes dry esterification of cotton cellulose

Cutinase from Thermobifida fusca was used to esterify the hydroxyl groups of cellulose with the fatty acids from triolein. Cutinase and triolein were pre-adsorbed on cotton and the reaction proceeded in a dry state during 48 hours at 35ºC. The cutinase-catalyzed esterification of the surface of cotton fabric resulted in the linkage of the oleate groups to the glycoside units of cotton cellulose. The superficial modification was confirmed by performing ATR-FTIR on treated cotton samples and by MALDI-TOF analysis of the liquors from the treatment of the esterified cotton with a crude cellulase mixture. Modified cotton fabric also showed a significant increase of hydrophobicity. This work proposes a novel bio-based approach to obtain hydrophobic cotton. This article is protected by copyright. All rights reserved.

Bacterial cellulose surface modification

The unique properties of bacterial nanocellulose (BNC) provide the basis for a wide range of applications in human and veterinary medicine, odontology, pharmaceuticals, acoustic and filter membranes, biotechnological devices, and in the food and paper industry. In this chapter, an overview of surface modifications of bacterial cellulose is presented. Depending on the envisaged applications, chemical modifications, incorporation of bioactive molecules, modification of the porosity, crystallinity, and biodegradability may be obtained, further enlarging the potential of BNC.

Bacterial cellulose-lactoferrin as an antimicrobial edible packaging

Bacterial cellulose (BC) films from two distinct sources (obtained by static culture with Gluconacetobacter xylinus ATCC 53582 (BC1) and from a commercial source (BC2)) were modified by bovine lactoferrin (bLF) adsorption. The functionalized films (BC+bLF) were assessed as edible antimicrobial packaging, for use in direct contact with highly perishable foods, specifically fresh sausage as a model of meat products. BC+bLF films and sausage casings were characterized regarding their water vapour permeability (WVP), mechanical properties, and bactericidal efficiency against two food pathogens, Escherichia coli and Staphylococcus aureus. Considering their edibility, an in vitro gastrointestinal tract model was used to study the changes occurring in the BC films during passage through the gastrointestinal tract. Moreover, the cytotoxicity of the BC films against 3T3 mouse embryo fibroblasts was evaluated. BC1 and BC2 showed equivalent density, WVP and maximum tensile strength. The percentage of bactericidal efficiency of BC1 and BC2 with adsorbed bLF (BC1+bLF and BC2+bLF, respectively) in the standalone films and in inoculated fresh sausages, was similar against E. coli (mean reduction 69 % in the films per se versus 94 % in the sausages) and S. aureus (mean reduction 97 % in the films per se versus 36 % in the case sausages). Moreover, the BC1+bLF and BC2+bLF films significantly hindered the specific growth rate of both bacteria. Finally, no relevant cytotoxicity against 3T3 fibroblasts was found for the films before and after the simulated digestion. BC films with adsorbed bLF may constitute an approach in the development of bio-based edible antimicrobial packaging systems.

Caracterización, procesamiento e industrialización del grano de quinoa, cultivado en la provincia de Córdoba - Argentina. Characterization, processing and industrialization of quinoa seed harvested in the province of Córdoba - Argentina

La quinoa (Chenopodium quinoa Willd), es un pseudocereal originario de la región Andina. Fue utilizada como alimento básico por los pueblos nativos. La quinoa, la papa y el maíz constituyeron el trinomio base de la alimentación indígena de este continente. La colonización española fue desplazando su cultivo a favor del trigo europeo y otros cereales, quedando reducida a las zonas altas de la región andina. La Quínoa ha adquirido una considerable atención en los últimos tiempos, principalmente por la calidad de sus proteínas y la ausencia de gluten en ella. Su empleo está ampliamente difundido en los países andinos, especialmente Bolivia y Perú, con un notable crecimiento de la superficie sembrada. En nuestro país la explotación de este cultivo se ubica principalmente en las provincias norteñas de Salta y Jujuy. En estos últimos años se ha reivindicado su cultivo y los granos privados de saponinas son considerados como un excelente alimento, reconocido por la OMS, la FAO y la NASA. Además de la calidad de sus lípidos y vitaminas, y al elevado contenido en almidón, la quinoa posee una proteína de excelente calidad nutricional y libre de gluten, lo que hace a este grano especialmente indicado para la alimentación de personas que sufren de la enfermedad celíaca o del síndrome de intestino irritado. El presente proyecto está orientado al aprovechamiento integral del grano de quinoa. Es nuestra intensión aquí, demostrar que dicho grano, cultivado en la provincia de Córdoba, permitirá elaborar productos alimenticios asi como también derivados de su industrialización. Para este objetivo se cuenta con las instalaciones de la Planta Piloto del Instituto de Ciencia y Tecnología de los Alimentos (ICTA), de la UNC, así como de intrumental moderno y acorde, como HPLC, GC, Espectrofotómetro UV-Vis, rotavapores de laboratorio e industrial, cámara fría, balanzas analíticas y de precisión, muflas, estufas, molinos y tamices, así como también, contamos con profesionales, algunos de ellos realizando su tesis doctoral en este tema. En cuanto a los objetivos que se persiguen, se espera obtener productos tales como sopas, papillas, productos para panadería y galletería y salsas. En el plano industrial, se pretende elaborar concentrados proteicos, almidón y saponinas. Como se dijo más arriba, a nivel internacional la quinoa ha comenzado a extender sus fronteras, y es así que hoy el principal productor mundial de este grano, Bolivia, destina un porcentaje importante de su producción a la exportación. La creciente demanda mundial de quinoa a hecho que se constituya en un cultivo estratégico y de alto valor, con precios internacionales que rondan los U$S 1200 la tonelada. Si a esto unimos que la planta presenta una gran resistencia a la sequía, que se adapta bien a terrenos salitrosos, arenosos y pobres, podemos comprender la importancia que adquiere para nuestra provincia, toda vez que en la misma existen zonas geográficas potencialmente aptas para su cultivo. Quinoa (Chenopodium quinoa Willd) is a pseudocereal originating in the Andean region. It was used as a staple food by native peoples. Quinoa, potatoes and corn were the tree most important indigenous staple food to this part of South America. Spanish colonization was marginalized cultivation in favor of European wheat and other grains, displacing it to the highlands of the Andean region. Quinoa has recently gained considerable attention, mainly by its protein quality and lack of gluten. Its use is widespread in the Andean countries, especially Bolivia and Peru, with a notable increase in plantings. In our country, the exploitation of this crop is located mainly in the northern provinces of Salta and Jujuy. In recent years its cultivation has been promoted, and the grains once free of saponins are considered an excellent food, recognized by WHO, FAO and NASA. In addition to its lipid and vitamins, and high starch contain, quinoa protein has an excellent nutritional value and it is free of gluten, making it particularly suitable for this grain to feed people with celiac disease or irritable bowel syndrome. This project aims at an integral development of quinoa grain. It is our intention here to demonstrate that this grain grown in the province of Córdoba, can produce food products resulting from local industrialization. This team has access to the facilities of the Pilot Plant of the Institute of Science and Food Technology (ICTA) of the UNC, and the modern equipments in it, as HPLC, GC, UV-Vis spectrophotometer, laboratory and industrial rotary evaporators, cold storage, analytical and precision balances, flasks, ovens, grinders and screens. Also, we have an important professional staff, some of them doing their thesis on this subject. With regard to the objectives pursued, we expect to obtain products such as soups, baby food, bakery products and biscuits and sauces. At the industrial level, it aims at producing protein concentrates, starch and saponins.