Tuning chelation by the surfactant-like peptide A6H using predetermined pH values

We examine the self-assembly of a peptide A6H comprising a hexa-alanine sequence A6 with a histidine (H) “head group”, which chelates Zn2+ cations. We study the self assembly of A6H and binding of Zn2+ ions in ZnCl2 solutions, under acidic and neutral conditions. A6H self-assembles into nanotapes held together by a β-sheet structure in acidic aqueous solutions. By dissolving A6H in acidic ZnCl2 solutions, the carbonyl oxygen atoms in A6H chelate the Zn2+ ions and allow for β-sheet formation at lower concentrations, consequently reducing the onset concentration for nanotape formation. A6H mixed with water or ZnCl2 solutions under neutral conditions produces short sheets or pseudocrystalline tapes, respectively. The imidazole ring of A6H chelates Zn2+ ions in neutral solutions. The internal structure of nanosheets and pseudocrystalline sheets in neutral solutions is similar to the internal structure of A6H nanotapes in acidic solutions. Our results show that it is possible to induce dramatic changes in the self-assembly and chelation sites of A6H by changing the pH of the solution. However, it is likely that the amphiphilic nature of A6H determines the internal structure of the self-assembled aggregates independent from changes in chelation.

The science case for an orbital mission to Uranus: Exploring the origins and evolution of ice giant planets

Giant planets helped to shape the conditions we see in the Solar System today and they account for more than 99% of the mass of the Sun’s planetary system. They can be subdivided into the Ice Giants (Uranus and Neptune) and the Gas Giants (Jupiter and Saturn), which differ from each other in a number of fundamental ways. Uranus, in particular is the most challenging to our understanding of planetary formation and evolution, with its large obliquity, low self-luminosity, highly asymmetrical internal field, and puzzling internal structure. Uranus also has a rich planetary system consisting of a system of inner natural satellites and complex ring system, five major natural icy satellites, a system of irregular moons with varied dynamical histories, and a highly asymmetrical magnetosphere. Voyager 2 is the only spacecraft to have explored Uranus, with a flyby in 1986, and no mission is currently planned to this enigmatic system. However, a mission to the uranian system would open a new window on the origin and evolution of the Solar System and would provide crucial information on a wide variety of physicochemical processes in our Solar System. These have clear implications for understanding exoplanetary systems. In this paper we describe the science case for an orbital mission to Uranus with an atmospheric entry probe to sample the composition and atmospheric physics in Uranus’ atmosphere. The characteristics of such an orbiter and a strawman scientific payload are described and we discuss the technical challenges for such a mission. This paper is based on a white paper submitted to the European Space Agency’s call for science themes for its large-class mission programme in 2013.

Evaluation of water properties in HEA–HEMA hydrogels swollen in aqueous-PEG solutions using thermoanalytical techniques

Hydrogels are polymeric materials used in many pharmaceutical and biomedical applications due to their ability to form 3D hydrophilic polymeric networks, which can absorb large amounts of water. In the present work, polyethylene glycols (PEG) were introduced into the hydrogel liquid phase in order to improve the mechanical properties of hydrogels composed of 2-hydroxyethylacrylate and 2-hydroxyethylmethacrylate (HEA–HEMA) synthesized with different co-monomer compositions and equilibrated in water or in 20 % water–PEG 400 and 600 solutions. The thermoanalytical techniques [differential scanning calorimetry (DSC) and thermogravimetry (TG)] were used to evaluate the amount and properties of free and bound water in HEA–HEMA hydrogels. The internal structure and the mechanical properties of hydrogels were studied using scanning electron microscopy and friability assay. TG “loss-on-drying” experiments were applied to study the water-retention properties of hydrogels, whereas the combination of TG and DSC allowed estimating the total amount of freezable and non-freezing water in hydrogels. The results show that the addition of viscous co-solvent (PEG) to the liquid medium results in significant improvement of the mechanical properties of HEA–HEMA hydrogels and also slightly retards the water loss from the hydrogels. A redistribution of free and bound water in the hydrogels equilibrated in mixed solutions containing 20 vol% of PEGs takes place.

G band atmospheric radars: new frontiers in cloud physics

Clouds and associated precipitation are the largest source of uncertainty in current weather and future climate simulations. Observations of the microphysical, dynamical and radiative processes that act at cloud scales are needed to improve our understanding of clouds. The rapid expansion of ground-based super-sites and the availability of continuous profiling and scanning multi-frequency radar observations at 35 and 94 GHz have significantly improved our ability to probe the internal structure of clouds in high temporal-spatial resolution, and to retrieve quantitative cloud and precipitation properties. However, there are still gaps in our ability to probe clouds due to large uncertainties in the retrievals. The present work discusses the potential of G band (frequency between 110 and 300 GHz) Doppler radars in combination with lower frequencies to further improve the retrievals of microphysical properties. Our results show that, thanks to a larger dynamic range in dual-wavelength reflectivity, dual-wavelength attenuation and dual-wavelength Doppler velocity (with respect to a Rayleigh reference), the inclusion of frequencies in the G band can significantly improve current profiling capabilities in three key areas: boundary layer clouds, cirrus and mid-level ice clouds, and precipitating snow.

Equation for the microwave backscatter cross section of aggregate snowflakes using the self-similar Rayleigh–Gans approximation

In this paper an equation is derived for the mean backscatter cross section of an ensemble of snowflakes at centimeter and millimeter wavelengths. It uses the Rayleigh–Gans approximation, which has previously been found to be applicable at these wavelengths due to the low density of snow aggregates. Although the internal structure of an individual snowflake is random and unpredictable, the authors find from simulations of the aggregation process that their structure is “self-similar” and can be described by a power law. This enables an analytic expression to be derived for the backscatter cross section of an ensemble of particles as a function of their maximum dimension in the direction of propagation of the radiation, the volume of ice they contain, a variable describing their mean shape, and two variables describing the shape of the power spectrum. The exponent of the power law is found to be −. In the case of 1-cm snowflakes observed by a 3.2-mm-wavelength radar, the backscatter is 40–100 times larger than that of a homogeneous ice–air spheroid with the same mass, size, and aspect ratio.

Earth hummocks in north-east Okstindan, northern Norway: morphology, distribution and environmental constraints

Earth hummocks (also termed pounus or thúfur) are a common form of periglacial non-sorted patterned ground. The study objectives were to determine the morphology, distribution and development on slopes of earth hummocks in north-east Okstindan, Norway, an area with many hummocks but few documented accounts. The methodology involved detailed geomorphological mapping and precise measurement with a profileometer. The internal structure of the hummocks was investigated through excavations and sediment sample analyses. Fourteen sites with well-developed earth hummocks (accounting for over 650 individual hummock forms) were investigated. The sites have an average altitude of 750 m and occur on slopes with an average gradient of 7°. The hummock heights are in the range 0.11–0.52 m and their diameters 0.7–1.5 m, although coalescent forms are up to 5 m in length. The hummock morphology is characterised by a variable plan form, asymmetry with respect to upslope and downslope forms, downslope elongation, coalescence, and superimposed microtopography. The hummocks’ distribution appeared to have been controlled by the existence of a frost-susceptible ‘host’ sediment, but moisture availability and topographic position played a role. The authors conclude that differential frost heave and vegetation cover stability are critical for the hummocks’ longevity in the studied landscape.

Self-assembled arginine-capped peptide bolaamphiphile nanosheets for cell culture and controlled wettability surfaces

The spontaneous assembly of a peptide bolaamphiphile in water, namely, RFL4FR (R, arginine; F, phenylalanine; L, leucine) is investigated, along with its novel properties in surface modification and usage as substrates for cell culture. RFL4FR self-assembles into nanosheets through lateral association of the peptide backbone. The L4 sequence is located within the core of the nanosheets, whereas the R moieties are exposed to the water at the surface of the nanosheets. Kinetic assays indicate that the self-assembly is driven by a remarkable two-step process, where a nucleation phase is followed by fast growth of nanosheets with an autocatalysis process. The internal structure of the nanosheets is formed from ultrathin bolaamphiphile monolayers with a crystalline orthorhombic symmetry with cross-β organization. We show that human corneal stromal fibroblast (hCSF) cells can grow on polystyrene films coated with films dried from RFL4FR solutions. For the first time, this type of amphiphilic peptide is used as a substrate to modulate the wettability of solid surfaces for cell culture applications.

A prospectus for future geomorphological investigation of the Namib sand sea

The Namib Sand Sea in southern Africa offers an ideal location in which to consider general questions about the evolution of sand seas, about the fluxes of sand through contemporary dune fields and about the patterns of dune form that are created. This paper aims to provide a concise account of the approaches and techniques that are currently being used and will be used in the future to address these questions. The paper considers the techniques employed to investigate wind climate, the morphometry of the dunes, the internal structure of dune sediments, the age of the dunes and the potential to model dune development

A METHOD FOR THE STUDY OF ACCRETION DISK EMISSION IN CATACLYSMIC VARIABLES. I. THE MODEL

We have developed a spectrum synthesis method for modeling the ultraviolet (UV) emission from the accretion disk from cataclysmic variables (CVs). The disk is separated into concentric rings, with an internal structure from the Wade & Hubeny disk-atmosphere models. For each ring, a wind atmosphere is calculated in the comoving frame with a vertical velocity structure obtained from a solution of the Euler equation. Using simple assumptions, regarding rotation and the wind streamlines, these one-dimensional models are combined into a single 2.5-dimensional model for which we compute synthetic spectra. We find that the resulting line and continuum behavior as a function of the orbital inclination is consistent with the observations, and verify that the accretion rate affects the wind temperature, leading to corresponding trends in the intensity of UV lines. In general, we also find that the primary mass has a strong effect on the P Cygni absorption profiles, the synthetic emission line profiles are strongly sensitive to the wind temperature structure, and an increase in the mass-loss rate enhances the resonance line intensities. Synthetic spectra were compared with UV data for two high orbital inclination nova-like CVs-RW Tri and V347 Pup. We needed to include disk regions with arbitrary enhanced mass loss to reproduce reasonably well widths and line profiles. This fact and a lack of flux in some high ionization lines may be the signature of the presence of density-enhanced regions in the wind, or alternatively, may result from inadequacies in some of our simplifying assumptions.

DENSITY PROFILE, VELOCITY ANISOTROPY, AND LINE-OF-SIGHT EXTERNAL CONVERGENCE OF SLACS GRAVITATIONAL LENSES

Data from 58 strong-lensing events surveyed by the Sloan Lens ACS Survey are used to estimate the projected galaxy mass inside their Einstein radii by two independent methods: stellar dynamics and strong gravitational lensing. We perform a joint analysis of these two estimates inside models with up to three degrees of freedom with respect to the lens density profile, stellar velocity anisotropy, and line-of-sight (LOS) external convergence, which incorporates the effect of the large-scale structure on strong lensing. A Bayesian analysis is employed to estimate the model parameters, evaluate their significance, and compare models. We find that the data favor Jaffe`s light profile over Hernquist`s, but that any particular choice between these two does not change the qualitative conclusions with respect to the features of the system that we investigate. The density profile is compatible with an isothermal, being sightly steeper and having an uncertainty in the logarithmic slope of the order of 5% in models that take into account a prior ignorance on anisotropy and external convergence. We identify a considerable degeneracy between the density profile slope and the anisotropy parameter, which largely increases the uncertainties in the estimates of these parameters, but we encounter no evidence in favor of an anisotropic velocity distribution on average for the whole sample. An LOS external convergence following a prior probability distribution given by cosmology has a small effect on the estimation of the lens density profile, but can increase the dispersion of its value by nearly 40%.

Logística : análise dos serviços ao cliente e do perfil do pedido - o caso Plaything S.A.

A logística é, atualmente, um dos mais importantes diferenciais competitivos existentes em empresas do mundo inteiro. Ela envolve todas as áreas da empresa, o que dificulta o esgotamento de uma discussão profunda sobre este tema. Este estudo de caso se propõe a analisar alguns aspectos deste conceito, mais precisamente aqueles voltados para o serviço ao cliente e seu reflexo no sistema de distribuição de uma empresa. O objetivo deste trabalho é fornecer informações que possibilitem definir uma estrutura de distribuição que seja capaz de adicionar valor para seus clientes e vantagem competitiva para a empresa. Nesta discussão, através de uma pesquisa bibliográfica, ficou claro que as necessidades do cliente definem os serviços a serem oferecidos pela empresa, e, através de uma pesquisa de campo, ficaram estabelecidos quais são estes serviços. Para este estudo de caso, foi escolhida uma empresa de brinquedos, a Plaything S/A Ind. e Com., com marcante atuação nacional, em que se discute seu conjunto de serviços sob o aspecto externo e interno. No aspecto externo, através de uma pesquisa, estabelece-se uma hierarquização de necessidades dos clientes e verifica-se se os serviços oferecidos por esta empresa estão de acordo com estas necessidades. Ao mesmo tempo, esta pesquisa posiciona a empresa em relação a seus concorrentes quanto à satisfação das necessidades de seus clientes, ou seja, define gaps existentes entre necessidades e serviços oferecidos. No aspecto interno, busca definir o perfil do pedido desta empresa como forma de adequar sua estrutura e processo de armazenagem. Através desta análise, constata-se que a empresa estudada oferece um nível de serviço cuja satisfação está de acordo com seus concorrentes, porém aquém do que esperam seus clientes. Conclui-se ainda que o perfil do cliente provoca diferenças de percepção quanto à importância e à satisfação dos atributos pesquisados. O estudo do perfil do pedido revela que esta empresa tem pedidos de pequeno valor, pouco freqüentes e com poucos itens. Este perfil obriga a empresa a maximizar sua estrutura interna de distribuição física, tanto em termos de processos de armazenagem como de separação e manuseio dos produtos. Na conclusão do trabalho, são apresentas algumas recomendações à empresa pesquisada, levando-se em consideração os resultados da pesquisa e a necessidade de optar-se por estratégias que sejam inovadoras, adequadas ao rápido processo de mudanças de conceitos da época atual.

Essays on industrial organization

Esta tese compõe-se de três ensaios que versam sobre o formato, em termos de estrutura de governança, das indústrias e como a estrutura interna das mesmas in fluenciam esses formatos e seus produtos. O primeiro capítulo apresenta um modelo de como a qualidade institucional, confiança e incompleteza contratual afetam as decisiões das firmas sobre a melhor forma de se organizarem internacionalmente. O segundo capítulo vai na mesma direcão de explicar a organização das indústrias, mas com foco no efeito da transmissão de informação entre as unidades constituintes das organizações sobre o formato ótimo das mesmas. Ambos trabalhos usam modelos dinâmicos. O terceiro capítulo se utiliza da modelagem de organização industrial para mostrar como a estrutura interna de uma indústria in fluencia no risco de crédito consignado.

Categorias no pensamento humano: conceitos ou protótipos?

Este trabalho representa urna tentativa de recolocar, à luz das mais recentes contribuições teóricas e verificações empíricas, o terna da obtenção de conceitos e de sua atual alternativa, expressa através da teoria dos protótipos. Para a consecução de tal objetivo, fez-se inicialmente urna revisão dos principais aspectos que caracterizam a abordagem clássica na obtenção de conceitos. Nessa abordagem, define-se um conceito por um pequeno conjunto de propriedades comuns a todos os seus exemplares, que são necessárias e suficientes para este fim. A análise dos resultados obtidos confirmou plenamente a hipótese em questão, indicando que a estrutura interna das categorias de ambientes possuía uma realidade psicológica e que tal estrutura afetava o processamento cognitivo destas categorias. As evidências reunidas nos três estudos possibilitaram uma confirmação e extensão de algumas das formulações teóricas subjacentes ã abordagem de protótipos na formação de categorias e possibilitaram o desenvolvimento de sugestões úteis ã Psicologia Ambiental, ã Psicologia Instrucional e ã elaboração de modelos sobre o processo de for mação de categorias.

O processo de institucionalização do curso de administração a distância da UFRN

This work aims to describe how is occurring through the process of institutionalizing the Administration distance course of UFRN. To this end, structured into two parts: through research and analysis of content, sought to impound as if gave historic process of creation, as well as identify variables isomórficas, proposed by Powell and DiMaggio (1991), on the actions undertaken, and still present, institutional actors-having been found three typologies; then investigated the process itself, analyzing the factors of institutionalization suggested Esman (1966-1972), internal structure doctrine, leadership programme, resources, links and exchanges, from the political plan educational course. As the research methodology was defined as qualitative, even though I used survey to collect, reviewed the second ANOVA. The results found in this step pointed out that only the doctrine and internal structure variables are consistent with the assumptions of model; we found for other, discharged indicated a gap between the political acts contemplated in teaching and the actions taken so far, unfavourable element to its legitimacy. However, although the implications found in the analysis of these factors suggest that this course can derive one more discontinuous Government proposal of distance course, this study believes that are still reasonable assistance to facilitate and promote the process aimed at strengthening the progress achieved so far in the success of its institutionalization

Transferência de calor transiente na agitação linear intermitente de latas

Foi estudada a transferência de calor transiente na agitação linear e intermitente (ALI) de embalagens metálicas contendo simulantes de alimentos, objetivando-se sua aplicação em processos de pasteurização ou esterilização e conseqüentes tratamentos térmicos mais eficientes, homogêneos e com produto de melhor qualidade. Foram utilizados quatro meios fluidos simulantes de alimentos de diferentes viscosidades e massas específicas: três óleos e água. Foram combinados efeitos de cinco tratamentos, sendo: meio simulante (4 níveis), espaço livre (3 níveis), freqüência de agitação (4 níveis), amplitude de agitação (2 níveis) e posição das latas (4 níveis). Os ensaios de aquecimento e resfriamento foram feitos em tanque com água à temperatura de 98 °C e 17-20 °C, respectivamente. Com os dados de penetração de calor em cada experimento, foram calculados os parâmetros de penetração de calor fh, jh, fc e jc. Os resultados foram modelados utilizando-se grupos de números adimensionais e expressos em termos de Nusselt, Prandtl, Reynolds e funções trigonométricas (com medidas de amplitude e freqüência de agitação, espaço livre e dimensões da embalagem). Foram estabelecidas as duas Equações gerais para as fases de aquecimento e resfriamento: Nu = ReA 0,199.Pr 0,288.sen(xa/AM)0,406.cos(xf/FA) 1,039.cos((xf/FA).(EL/H).p) 4,556 Aquecimento Nu = 0,1295.ReA 0,047.Pr 0,193.sen(xa/AM)0,114.cos(xf/FA) 0,641.cos((xf/FA).(EL/H).p) 2,476 Resfriamento O processo de ALI pode ser aplicado em pasteurizadores ou autoclaves estáticas horizontais e verticais, com modificações simples. Concluiu-se que a ALI aumenta significativamente a taxa de transferência de calor, tanto no aquecimento como no resfriamento.