Uso de cloridrato de zilpaterol em dietas para bovinos nelore confinados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito agudo de diferentes intensidades de exercícios com pesos sobre o volume e a contração voluntária máxima isométrica, em idosas treinadas

The prescription of strength training intensity (ST) by maximum repetition (RM) is characterized by a decrease in the number of repetitions in multiple series. Some studies have shown that reductions in the intensity of exercise can optimize the volume of training with similar acute neuromuscular behaviors. The objective of the study was to investigate the acute effect of two different ST intensities on the training volume, maximum voluntary contraction (MVC) and rate of force development (RFD) in elderly women. The study included eight trained women (66.7 ± 6.7 years; 7.6 ± 17.8 kg; 159 cm; 29.33 ± 5.80 kg/m²). They underwent to three experimental conditions: two different intensities of ST (100% and 80% of 15-RM) on a chair for Leg Extension and a control condition. In the condition to 100% of 15 RM, all participants performed three sets to the concentric muscle fatigue, whereas in the condition to 80% involved the use of two sets of 15 repetitions and only the third to the concentric muscle fatigue. The order of experimental conditions was randomized. The MVC and RFD were determined on the basis of the isometric forcetime curve analysis which was obtained by a force transducer fixed on the unit Bonnet Chair, in the pre and after four and ten minutes for each experimental conditions. The total volume was calculated by multiplying the number of repetitions in three sets by the load in kg. Descriptive statistical analysis procedures were employed (mean ± standard deviation) in addition to two-way ANOVA. The level of significance was set at p <0.05. It was neither main effect of moment or condition, nor condition x moment interaction for MVC and RFD. For the total volume, no significant difference was noted between the conditions (100 and 80% of 15-RM). For sustainability of ...(Complete abstract click electronic access below)

Melhoria da qualidade de um processo de usinagem utilizando as técnicas de avaliação de Taguchi

Delivering to the customers a product or service with the expected quality associated to the huge competitiveness that exists in the market nowadays, has been making organizations increasingly focus on quality planning using techniques which are directed towards the continuous improvement process and production optimization. Thus, this paper aims to improve a machining process using the techniques of experimental design to the optimization and this also includes the analysis of the measurement system. For this purpose, the alloy Nimonic 80A, a nickel base superalloy, was used in the process due to its widespread use for high temperatures, applying this study the robust method proposed by Genichi Taguchi, determining the influence of the factors considered input variables, cutting speed, feed rate, depth of cut, type of tool, lubrication, and material hardness, in the output or response variable, surface roughness, concluding with the use of Taguchi orthogonal array L16 and by analysis of ANOVA that the factor feed rate is significant and offers greater effect on the response variable studied, should be set to 0,12mm/rev. Moreover, the factor type of tool has more influence on the process when compared to other factors, being CP250 the one more suitable to the process. Lastly, the interaction feed rate x cutting speed provides greater significance in the process regarding to surface roughness variable, being the best match between them 0,12mm/rev to the feed rate and 90m/min to the cutting speed. In order to evaluate the measurement system, it was applied the repeatability and reproducibility method (R&R), through which we saw that the system needs improvement (R & R = 88.04% >>> 30%) as the value found in the study was well above compared to the one that classifies the system as inappropriate

Uso de microarray para determinação da expressão gênica diferencial em oócitos Bos Taurus Indicus e Bos Taurus Taurus submetidos ao estresse térmico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Performance and parasite control of different genetic groups of lambs finished in irrigated pasture

The aim of this study was to compare the following four genetic groups of hair sheep: Santa Inês (SI), Morada Nova (MN), Brazilian Somali (BS), and the F1 1/2Dorper x 1/2Morada Nova crossbreed on traits related to growth and parasitic infection. Thirty-three male lambs of the same age and of simple birth, under the same pre-weaning management conditions were used in the experiment. After weaning the animals were housed in a completely randomized design in paddocks made of Panicum maximum cv. Tanzania. Along the course of the research, the performance of the four groups of sheep was observed to be negatively affected by gastrointestinal parasites, but there was a genotype effect to the average daily weight gain (ADWG), where the SI and F1 genotypes presented higher values. The effects of genotype, time and genotype x time interaction were significant in weight and corporal score (CS) measurements. The BS lambs had the highest CS values throughout the experiment despite not presenting greater weight gain when compared to the SI and F1 breeds. There were also significant effects of time and genotype x time interaction for packed cell volume (PCV) and FAMACHA© score (FAM) and only the time effect was significant in the total number of eggs per gram (EPG) and total plasma protein (TPP). The MN lambs showed higher PCV values and unlike the other groups, presented a FAMACHA© score below 3 and PCV above 23% even having a higher EPG tendency, especially in the initial phase, indicating a possible higher resilience to infection caused by gastrointestinal parasites.

Modelagem das trajetórias médias do peso vivo e do rendimento de carcaça de tilápias do Nilo (Oreochromis niloticus) por meio de funções B-spline

Employing the method of least squares and quadratic B-spline polynomials, different statistical models were tested to identify the most appropriate to model the mean trajectories of live weight and carcass yield of Nile tilapia (Oreochromis niloticus). Data of live weight (8,758) and carcass yield (2,042) of tilapias with ages between 106 and 245 days were obtained from 72 families derived from 36 males and 72 females. The sex and tank variables were considered as classificatory and the coefficients of quadratic polynomials B-spline of two to five intervals of the same size were used as covariables. According to most fit criteria used, the models with quadratic B-spline polynomial with five intervals of the same size presented the best adjustments. The increase in number of intervals of B-spline polynomial improved the fit of the polynomials to the data. The inclusion of classificatory effects from sex, tank, the interaction of these effects and the quadratic polynomial B-spline nested in this interaction indicated that, over time, each sex, grown in different tank, presented different mean trajectory, necessitating the inclusion of nesting time in the interaction sex x tank in order to avoid the under or overestimation of breeding values of the selection candidates in breeding programs of this species.

Seed quality, chlorophyll content index and leaf nitrogen levels in maize inoculated with Azospirillum brasilense

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Adubação nitrogenada e potássica em goiabeiras ‘paluma’: I. efeito na produtividade e na qualidade dos frutos para industrialização

The nutrition of the orchards is the major factor of productivity, being necessary to know the proper doses of fertilizers and their influence on fruit quality attributes for industrialization. This study evaluated the effects of different doses of nitrogen and potassium on the productivity of guava trees and also on the values of pH, soluble solids (SS), titratable acidity (TA) and pulp/kernel ratio of guavas. The experiment was conducted at Vista Alegre do Alto, SP in an irrigated 'Paluma'guava orchard, 7 years old, managed with pruning during three consecutive cycles of production. The soil of the area was dystrophic Ultisol. The experimental design was the randomized blocks, in factorial, with four nitrogen doses (0, 0.5, 1 and 2 kg of N plant(-1)) and four of potassium (0, 0.55, 1.1 and 2.2 kg of K2O plant(-1)), with three replications. Nitrogen fertilization increased productivity and the pH of the fruit, being explained by the quadratic polynomial regression models; reduced linearly the pulp/kernel ratio and do not influenced the SS and TA values. On the other hand, potassium fertilization and N x K interaction had no significant effects on productivity and the other characteristics evaluated.

Adesivos multi-uso-avaliação da resistência adesiva a dentina frente a teste de cisalhamento, estereomicroscopia e microscopia eletrônica de varredura

Recent bonding systems have been advocated as multi-purpose bonding agents. The aim of this study was to determine if some of these bonding systems could be associated to composite resins from different manufacturers. This investigation was conducted to test lhe shear bond strength of three bonding systems: Scotchbond Multi-Purpose (3M Dental Products), Optibond Light Cure (Kerr) and Optibond Dual Cure (Kerr), when each of them was associated to lhe composite resins: Z1 00 (3M Dental Products), Prisma - APH (Dentsply) and Herculite XRV (Kerr). Seventy-two flat dentin bonding sites were prepared to 600 grit on human premolars mounted using acrilic resins. The teeth were assigned at random to 9 groups of 8 samples each. A split die with a 3mm diameter was placed over lhe surface of lhe dentin treated with one of lhe adhesive systems, and lhe selected composite resin was inserted and light cured. The split mold was removed and all samples were termocycled and stored in 37ºC water for 24 hours before testing. Shear bond strength was determined using an lnstron Universal testing machine. Some failures were examined under lhe S.E.M. Data was analysed by one-way analysis of variance, that demonstrated a significant difference (p<0,05) in the mean shear bond strength among Optibond Light Cure (15,446 MPa), Scotchbond Multi-Purpose (13,339 MPa) and Optibond Dual Cure (10,019 MPa). These values did not depend on the composite resin used. The association between bonding system/composite resin was statistycally significant (p<0,05) and the best results were obtained when the composite resins Z100 and Herculite were used with the adhesive system Optibond Light Cure, and when the composite resin APH was used with the adhesive system Scotchbond Multi-Purpose

Comportamento ingestivo, desempenho e características de carcaça de cordeiros semi-confinados em sistema integrado de produção

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ergonomics and interfaces of traditional information systems: packaging

The contemporary world is characterized, among other factors, by the influence of the new computer information systems on the behavior of individuals. However, traditional information systems still have interaction problems with users. The aim of this study was to determine whether the interaction aspects between user versus traditional information systems (particularly the graphics) have been fully studied. To do so, the ergonomic aspects and usability of such systems were reviewed, with emphasis on the problems of visibility, legibility and readability. From that criteria, the evolution of ergonomic studies of information systems was reviewed (bibliometrics technique); and examples of ergonomic and usability problems in packaging were demonstrated (case study). The results confirm that traditional information systems still have problems of interaction between human X system, hindering the effective perception of information.

Valor nutritivo do capim Piatã adubado com diferentes doses de biofertilizante

The aim of this study was to verify the influence of different doses of biofertilizers made from waste produced by cattle and pigs at growing-finishing on nutritive value of Piatã grass. The experiment was carried out at green house using a split plot design with a completely randomized factorial. Plots were divided into eight treatments: four doses of two biofertilizers, and four different periods of subplots cut. Biofertilizers were applied at a single dose, after the cut to standardize the plots, using doses of Nitrogen of 0, 100, 200 and 300 kg ha-1 . The results showed no significant difference among types of biofertilizer and also, the biofertilizer x dose interaction was not significant, making possible to recommend both of biofertilizers, with no risk of plant injure. Contents of neutral detergent fiber, acid detergent fiber, cellulose, hemicellulose and lignin showed negative linear behavior as a function of increasing doses of nitrogen. Contents of crude protein and “in vitro” dry matter digestibility coefficients replied linearly and positively to nitrogen doses. It also observed the effect of cut periods, since plants that were cut in summer showed nutritive value superior to those plants that were cut in autumn.

Desempenho, mortalidade e escore fecal de bezerros aleitados com diferentes dietas líquidas e terapias de reidratação quando acometidos por diarreias

O objetivo deste trabalho foi avaliar o efeito da utilização de sucedâneo lácteo com alto conteúdo proteico de origem vegetal no desempenho e saúde de bezerros, e avaliar métodos de reidratação para o tratamento de diarreias. No primeiro estudo foram utilizados 33 bezerros da raça Holandês distribuídos nos tratamentos: 1) Alto volume e baixa proteína (AV/BP): 8 litros, 21,4% PB; 2) Alto volume e alta proteína (AV/AP): 8 litros, 23,7% PB e 3) Baixo volume e alta proteína (BV/AP): 6 litros, 23,7% PB. Os bezerros foram alojados em abrigos individuais, com livre acesso a água e concentrado. Não houve efeito dos tratamentos para o desempenho animal (P>0,05). Os tratamentos AV/BP e AV/AP resultaram em maior consumo de sucedâneo (P<0,05), mas não afetaram o consumo de concentrado nem o consumo total (P>0,05). O escore fecal foi maior (P>0,05) para animais nos tratamentos AV/AP e BV/AP. Os animais nos tratamentos AV/BP permaneceram maior número de dias em diarreia (P<0,05), em comparação aqueles aleitados com BV/AP, os quais tiveram menos dias com vida (P<0,05). A concentração de lactato foi maior (P<0,05) para animais nos tratamentos AV/BP e AV/AP enquanto a concentração de proteína total foi maior (P<0,05) nos tratamentos AV/BP e BV/AP. Sucedâneos com elevado conteúdo de proteína de origem vegetal afetam negativamente o desempenho de bezerros podendo levar o animal a morte. No segundo estudo foram comparados três soluções de hidratação oral quanto a sua eficiência em repor eletrólitos e água, além de manter o desempenho de bezerros. Foram utilizados 42 bezerros mestiços Holandês-Jersey, distribuídos nos tratamentos: 1) Soro comum, 2) Glutellac® e 3) Soro comum + Aminogut®. Os animais foram aleitados com 4 L/d de sucedâneo lácteo até a oitava semana de vida quando foram desaleitados de forma abrupta. As terapias de reidratação foram oferecidas quando os animais apresentavam escore fecal >= 3 na escala de 1 a 5. Não houve efeito das terapias de reidratação no desempenho nem em metabólitos sanguíneos (P>0,05). O consumo voluntário de água foi maior para os animais reidratados com Glutellac®, mas o consumo total maior para os animais reidratados com Soro comum. As concentrações de HCO3 e Na+ foram maiores para os animais no tratamento Glutellac® (P=0,088 e P=0,073 respectivamente), sendo a concentração de glicose também afetada pelo protocolo de hidratação (P<0,05). A concentração de HCO3 aumentou do primeiro para o segundo dia, a de K+ e glicose diminuíram do primeiro para o segundo dia, enquanto que o Beecf teve um comportamento variável segundo a terapia de reidratação utilizada. Houve efeito da interação tratamento x dia de avaliação apenas para a concentração de BUN (P<0,05). O pH, a concentração de Na+ e Beecf foram maiores em animais mais velhos, enquanto K+, hematócrito e hemoglobina, foram menores (P<0,05). O consumo voluntário de água foi maior em animais reidratados com Glutellac®, o que junto com a simplicidade de uso, representam as principais vantagens deste método de reidratação.

Adubação nitrogenada no milho em sucessão à plantas de cobertura sob sistemas de cultivo do solo

To achieve high yields the corn crop is dependent on nitrogen. Systems of cover crops preceding corn and form of land cultivation are essential for the best use of nitrogen by corn. This study aimed to evaluate the use or not of nitrogen fertilization in corn in succession to cover crops, planted in three cropping systems. The experimental design was randomized blocks with sub-divided portion where the main plots consisted of three cultivation systems (tillage, conventional tillage and minimum tillage), the subplots by four plant cover in monocrop (oat, hairy vetch, field peas and turnip) and sub-subplots by nitrogen fertilization (0 and 160 kg ha-1 N). Evaluations were performed, the cover crops, soil cover rate, dry matter, content and accumulation of nutrients. In corn we evaluated yield components, yield, chlorophyll and nutrient levels in leaves. Among the species coverage studied the oat showed hardiness in the experiment, covering ground faster and showing more dry matter, however vetch hairy showed higher concentrations of N, P and K and higher accumulation of N ha-1. The soil tillage system influenced the K leaf content. The interaction cultivation x coverage showed significance for the total chlorophyll of corn. In the absence of N, N content and chlorophyll were higher where the corn was sown on the pea and hairy vetch. The corn production, despite a higher average in the presence of nitrogen fertilization, did not differ significantly when used the pea and hairy vetch as a cover crop.

Eficácia e seletividade do iodossulfurão-metilo-sódio +mesossulfurão-metilo na cevada dística (Hordeum distichum L.)

Nos anos agrícolas de 2012/2013 e 2013/2014, realizaram-se na Herdade Experimental da Almocreva (Beja) quatro ensaios de campo (dois em cada ano) com o objetivo de estudar a eficácia e seletividade na cultura da cevada dística do herbicida iodossulfurão-metilo-sódio (50 g L-1) + mesossulfurão-metilo (7,5 g L-1). Em cada um dos ensaios, aplicaram-se três doses (5,0 + 0,75; 7,5 + 1,125 e 10,0 + 1,5 g s.a ha-1) do herbicida, em duas fases distintas do desenvolvimento das infestantes e da cultura. No ano de 2012/2013, o herbicida foi aplicado quando as infestantes se encontravam na fase de desenvolvimento de três a quatro pares de folhas e, a cultura, no início do afilhamento, a que correspondeu o estádio 20 da escala de Zadoks (primeira época de aplicação). A segunda época de aplicação realizou-se quando as infestantes estavam na fase de desenvolvimento de seis a sete pares de folhas e, a cultura, no afilhamento completo (estádio 29 da escala de Zadoks). No ano de 2013/2014, a primeira época de aplicação teve lugar quando as infestantes estavam na fase de desenvolvimento de cinco a seis pares de folhas e, a cultura, na fase de colmo principal (estádio 24 da escala de Zadoks). A segunda época de aplicação efetuou-se quando as infestantes estavam na fase de desenvolvimento de sete a oito pares de folhas e, a cultura, no 3º nó visível (estádio 33 da escala de Zadoks). Os resultados obtidos demonstraram, que a antecipação da aplicação para fases mais precoces do desenvolvimento das infestantes e da cultura não conduziu a um aumento da eficácia em relação a aplicações mais tardias, para todas as doses de herbicida. Com as doses recomendadas (7,5 + 1,125 e 10,0 + 1,5 g s.a ha-1) a eficácia foi maior em ambos os anos de ensaios e épocas de aplicação, relativamente à dose inferior (5,0 + 0,75 g s.a ha-1), mas a interação doses x épocas não foi significativa. No ano de 2012/2013 e contrariamente ao sucedido no ano de 2013/2014, verificou-se uma redução significativa da produtividade da cultura com a antecipação da aplicação, consequência da fitotoxidade causada pelo herbicida, quando esta se encontrava no início do afilhamento.