Characteristics of sediments from Amvrakikos Gulf, Greece

The evolution of environmental changes during the last decades and the impact on the living biomass in the western part of Amvrakikos Gulf was investigated using abundances and species distributions of benthic foraminifera and lipid biomarker concentrations. These proxies indicated that the gulf has markedly changed due to eutrophication. Eutrophication has led to a higher productivity, a higher bacterial biomass, shifts towards opportunistic and tolerant benthic foraminifera species (e.g. Bulimina elongata, Nonionella turgida, Textularia agglutinans, Ammonia tepida) and a lower benthic species density. Close to the Preveza Strait (connection between the gulf and the Ionian Sea), the benthic assemblages were more diversified under more oxygenated conditions. Sea grass meadows largely contributed to the organic matter at this sampling site. The occurrence of isorenieratane, chlorobactane and lycopane supported by oxygen monitoring data indicated that anoxic (and partly euxinic) conditions prevailed seasonally throughout the western part of the gulf with more severe oxygen depletion towards the east. Increased surface water temperatures have led to a higher stratification, which reduced oxygen resupply to bottom waters. Altogether, these developments led to mass mortality events and ecosystem decline in Amvrakikos Gulf.

Radiolarian fauna of sediment core MD96-2089 off Lüderitz, Namibia

The study of radiolarian assemblages from Core MD 962086 provides new information on the variability in the upwelling intensity and origin of upwelled water masses over the past 350 ky in one of the major filamentous regions of the Benguela Upwelling System (BUS), located off Lüderitz, Namibia. The use of key radiolarian species to trace the source of upwelled waters, and the use of a radiolarian-based upwelling index (URI) to reconstruct the upwelling intensity represent the first use of radiolarians for paleoceanographic reconstructions in the BUS. These radiolarian-based proxies indicate strongest upwelling during Marine Isotope Stages (MIS) 3, 5, and 8, which compares well with other studies. While during MIS 3 and 8, the radiolarian-based proxies indicate the influx of waters of Southern Ocean origin, they also point to the increased influence of tropical waters during the lower portion of MIS 5. During MIS 2, 4 and 6 the radiolarian assemblages indicate generally lower upwelling intensities, although this signal is complicated by the increased occurrence of organic carbon in the sediments during these intervals. During MIS 2 there appears to be less of an input of Southern Ocean waters to the BUS, although during the also glacial MIS 4 and 6, there is evidence for an increased influence of cold Antarctic waters. The comparison of the results from Core MD 962086 with other studies in the BUS area indicates a non-uniform pattern of upwelling intensity and advection of cold, southern waters into this system during MIS 2. Weaker upwelling signaled by the radiolarian-based proxy in MIS 4 is in contrast to other studies that indicate higher productivity during this time period. In general, the data show that there is a strong spatiotemporal complexity in upwelling intensity in the BUS and that the advection of water into it is not strongly tied to glacial-interglacial variations in climate.

Miocene planktonic foraminifera of ODP Hole 130-806B

We document the waxing and waning of a "proto-warm pool" in the western equatorial Pacific (WEP) based on a study of multi-species planktic foraminiferal isotope ratios and census data spanning the 13.2-5.8 Ma interval at ODP Site 806. We hypothesize that the presence or absence of a proto-warm pool in the WEP, caused by the progressive tectonic constriction of the Indonesian Seaway and modulated by sea level fluctuations, created El Niño/La Niña-like alternations of hydrographic conditions across the equatorial Pacific during the late Miocene. This hypothesis is supported by the general antithetical relationship observed between carbonate productivity and preservation in the western and eastern equatorial Pacific, which we propose is caused by these alternating ocean-climate states. Warming of thermocline and surface waters, as well as a major change in planktic foraminferal assemblages record a two-step phase of proto-warm pool development ~11.6-10 Ma, which coincides with Miocene isotope events Mi5 and Mi6, and sea-level low stands. We suggest that these changes in the biota and structure of the upper water column in the WEP mark the initiation of a more modern equatorial current system, including the development of the Equatorial Undercurrent (EUC), as La Niña-like conditions became established across the tropical Pacific. This situation sustained carbonate and silica productivity in the eastern equatorial Pacific (EEP) at a time when carbonate preservation sharply declined in the Caribbean. Proto-warm pool weakening after ~10 Ma may have contributed to the nadir of a similar "carbonate crash" in the EEP. Cooling of the thermocline and increased abundances of thermocline taxa herald the decay of the proto-warm pool and higher productivity in the WEP, particularly ~ 9.0-8.8 Ma coincident with a major perturbation in tropical nannofossil assemblages. We suggest that this interval of increased productivity records El Niño-like conditions across the tropical Pacific and the initial phase of the widespread "biogenic bloom". Resurgence of a later proto-warm pool in the WEP ~6.5-6.1 Ma may have spurred renewed La Niña-like conditions, which contributed to a strong late phase of the "biogenic bloom" in the EEP.

Individual dinoflagellate cysts species of surface sediment samples from the Mediterranean Sea

To determine the relationship between the spatial dinoflagellate cyst distribution and oceanic environmental conditions, 34 surface sediments from the Eastern and Western Mediterranean Sea have been investigated for their dinoflagellate cyst content. Multivariate ordination analyses identified sea-surface temperature, chlorophyll-a , nitrate concentration, salinity, and bottom oxygen concentration as the main factors affecting dinoflagellate cyst distribution in the region. Based on the relative abundance data, two associations can be distinguished that can be linked with major oceanographic settings. (1) An offshore eastern Mediterranean regime where surface sediments are characterized by oligotrophic, warm, saline surface water, and high oxygen bottom water concentrations (Impagidinium species, Nematosphaeropsis labyrinthus, Pyxidinopsis reticulata and Operculodinium israelianum). Based on the absolute abundance, temperature is positively related to the cyst accumulation of Operculodinium israelianum. Temperature does not form a causal factor influencing the accumulation rate of the other species in this association. Impagidinium species and Nematosphaeropsis labyrinthus show a positive relationship between cyst accumulation and nitrate availability in the upper waters. (2) Species of association 2 have highest relative abundances in the Western Mediterranean Sea, Strait of Sicily/NW Ionian Sea, and/or the distal ends of the Po/Nile/Rhône River plumes. At these stations, surface waters are characterized by (relative to the other regime) higher productivity associated with lower sea-surface temperature, salinity, and lower bottom water oxygen concentrations (Selenopemphix nephroides, Echinidinium spp., Selenopemphix quanta, Quinquecuspis concreta, Brigantedinium spp. and Lingulodinium machaerophorum). Based on both the absolute and relative abundances, Selenopemphix nephroides is suggested to be a suitable indicator to trace changes in the trophic state of the upper waters. The distribution of Lingulodinium machaerophorum is related to the presence of river-influenced surface waters, notably the Nile River. We suggest that this species might form a suitable marker to trace past variations in river discharge, notably from the Nile.

Responses of three tropical seagrass species to CO2 enrichment

Increased atmospheric carbon dioxide leads to ocean acidification and carbon dioxide (CO2) enrichment of seawater. Given the important ecological functions of seagrass meadows, understanding their responses to CO2 will be critical for the management of coastal ecosystems. This study examined the physiological responses of three tropical seagrasses to a range of seawater pCO2 levels in a laboratory. Cymodocea serrulata, Halodule uninervis and Thalassia hemprichii were exposed to four different pCO2 treatments (442-1204 µatm) for 2 weeks, approximating the range of end-of-century emission scenarios. Photosynthetic responses were quantified using optode-based oxygen flux measurements. Across all three species, net productivity and energetic surplus (PG:R) significantly increased with a rise in pCO2 (linear models, P < 0.05). Photosynthesis-irradiance curve-derived photosynthetic parameters-maximum photosynthetic rates (P max) and efficiency (alpha) also increased as pCO2 increased (linear models, P < 0.05). The response for productivity measures was similar across species, i.e. similar slopes in linear models. A decrease in compensation light requirement (Ec) with increasing pCO2 was evident in C. serrulata and H. uninervis, but not in T. hemprichii. Despite higher productivity with pCO2 enrichment, leaf growth rates in C. serrulata did not increase, while those in H. uninervis and T. hemprichii significantly increased with increasing pCO2 levels. While seagrasses can be carbon-limited and productivity can respond positively to CO2 enrichment, varying carbon allocation strategies amongst species suggest differential growth response between species. Thus, future increase in seawater CO2 concentration may lead to an overall increase in seagrass biomass and productivity, as well as community changes in seagrass meadows.

Complex Vertical FDI and Firm Heterogeneity: Evidence from East Asia

In this paper we statistically test the validity of the mechanics of complex VFDI in Japanese machinery FDI to East Asia; we do this by estimating a multiple-spatial lag model. From the theoretical point of view, in complex VFDI, the production activity of affiliates in a given country is positively related to that in neighboring countries which have large differences in factor prices with the given country. Our empirical results show that such mechanics of complex VFDI work in Japanese FDI to East Asia, and that they work more strongly in the MNEs with higher productivity. These results have an important implication for the policies of developing countries in attracting FDI.

Chapter 8 Location Choice of Japanese Multinationals: Country Characteristics or Region Characteristics?

In the present global era in which firms choose the location of their plants beyond national borders, location characteristics are important for attracting multinational enterprises (MNEs). The better access to countries with large market is clearly attractive for MNEs. For example, special treatments on tariffs such as the Generalized System of Preferences (GSP) are beneficial for MNEs whose home country does not have such treatments. Not only such country characteristics but also region characteristics (i.e. province-level or city-level ones) matter, particularly in the case that location characteristics differ widely between a nation's regions. The existence of industrial concentration, that is, agglomeration, is a typical regional characteristic. It is with consideration of these country-level and region-level characteristics that MNEs decide their location abroad. A large number of academic studies have investigated in what kinds of countries MNEs locate, i.e. location choice analysis. Employing the usual new economic geography model (i.e. constant elasticity of substitution (CES) utility function, Dixit-Stiglitz monopolistic competition, and ice-berg trade costs), the literature derives the profit function, of which coefficients are estimated using maximum likelihood procedures. Recent studies are as follows: Head, Rise, and Swenson (1999) for Japanese MNEs in the US; Belderbos and Carree (2002) for Japanese MNEs in China; Head and Mayer (2004) for Japanese MNEs in Europe; Disdier and Mayer (2004) for French MNEs in Europe; Castellani and Zanfei (2004) for large MNEs worldwide; Mayer, Mejean, and Nefussi (2007) for French MNEs worldwide; Crozet, Mayer, and Mucchielli (2004) for MNEs in France; and Basile, Castellani, and Zanfei (2008) for MNEs in Europe. At the present time, three main topics can be found in this literature. The first introduces various location elements as independent variables. The above-mentioned new economic geography model usually yields the profit function, which is a function of market size, productive factor prices, price of intermediate goods, and trade costs. As a proxy for the price of intermediate goods, the measure of agglomeration is often used, particularly the number of manufacturing firms. Some studies employ more disaggregated numbers of manufacturing firms, such as the number of manufacturing firms with the same nationality as the firms choosing the location (e.g., Head et al., 1999; Crozet et al., 2004) or the number of firms belonging to the same firm group (e.g., Belderbos and Carree, 2002). As part of trade costs, some investment climate measures have been examined: free trade zones in the US (Head et al., 1999), special economic zones and opening coastal cities in China (Belderbos and Carree, 2002), and Objective 1 structural funds and cohesion funds in Europe (Basile et al., 2008). Second, the validity of proxy variables for location elements is further examined. Head and Mayer (2004) examine the validity of market potential on location choice. They propose the use of two measures: the Harris market potential index (Harris, 1954) and the Krugman-type index used in Redding and Venables (2004). The Harris-type index is simply the sum of distance-weighted real GDP. They employ the Krugman-type market potential index, which is directly derived from the new economic geography model, as it takes into account the extent of competition (i.e. price index) and is constructed using estimators of importing country dummy variables in the well-known gravity equation, as in Redding and Venables (2004). They find that "theory does not pay", in the sense that the Harris market potential outperforms Krugman's market potential in both the magnitude of its coefficient and the fit of the model to be estimated. The third topic explores the substitution of location by examining inclusive values in the nested-logit model. For example, using firm-level data on French investments both in France and abroad over the 1992-2002 period, Mayer et al. (2007) investigate the determinants of location choice and assess empirically whether the domestic economy has been losing attractiveness over the recent period or not. The estimated coefficient for inclusive value is strongly significant and near unity, indicating that the national economy is not different from the rest of the world in terms of substitution patterns. Similarly, Disdier and Mayer (2004) investigate whether French MNEs consider Western and Eastern Europe as two distinct groups of potential host countries by examining the coefficient for the inclusive value in nested-logit estimation. They confirm the relevance of an East-West structure in the country location decision and furthermore show that this relevance decreases over time. The purpose of this paper is to investigate the location choice of Japanese MNEs in Thailand, Cambodia, Laos, Myanmar, and Vietnam, and is closely related to the third topic mentioned above. By examining region-level location choice with the nested-logit model, I investigate the relative importance of not only country characteristics but also region characteristics. Such investigation is invaluable particularly in the case of location choice in those five countries: industrialization remains immature in those countries which have not yet succeeded in attracting enough MNEs, and as a result, it is expected that there are not yet crucial regional variations for MNEs within such a nation, meaning the country characteristics are still relatively important to attract MNEs. To illustrate, in the case of Cambodia and Laos, one of the crucial elements for Japanese MNEs would be that LDC preferential tariff schemes are available for exports from Cambodia and Laos. On the other hand, in the case of Thailand and Vietnam, which have accepted a relatively large number of MNEs and thus raised the extent of regional inequality, regional characteristics such as the existence of agglomeration would become important elements in location choice. Our sample countries seem, therefore, to offer rich variations for analyzing the relative importance between country characteristics and region characteristics. Our empirical strategy has a further advantage. As in the third topic in the location choice literature, the use of the nested-logit model enables us to examine substitution patterns between country-based and region-based location decisions by MNEs in the concerned countries. For example, it is possible to investigate empirically whether Japanese multinational firms consider Thailand/Vietnam and the other three countries as two distinct groups of potential host countries, by examining the inclusive value parameters in nested-logit estimation. In particular, our sample countries all experienced dramatic changes in, for example, economic growth or trade costs reduction during the sample period. Thus, we will find the dramatic dynamics of such substitution patterns. Our rigorous analysis of the relative importance between country characteristics and region characteristics is invaluable from the viewpoint of policy implications. First, while the former characteristics should be improved mainly by central government in each country, there is sometimes room for the improvement of the latter characteristics by even local governments or smaller institutions such as private agencies. Consequently, it becomes important for these smaller institutions to know just how crucial the improvement of region characteristics is for attracting foreign companies. Second, as economies grow, country characteristics become similar among countries. For example, the LCD preferential tariff schemes are available only when a country is less developed. Therefore, it is important particularly for the least developed countries to know what kinds of regional characteristics become important following economic growth; in other words, after their country characteristics become similar to those of the more developed countries. I also incorporate one important characteristic of MNEs, namely, productivity. The well-known Helpman-Melitz-Yeaple model indicates that only firms with higher productivity can afford overseas entry (Helpman et al., 2004). Beyond this argument, there may be some differences in MNEs' productivity among our sample countries and regions. Such differences are important from the viewpoint of "spillover effects" from MNEs, which are one of the most important results for host countries in accepting their entry. The spillover effects are that the presence of inward foreign direct investment (FDI) aises domestic firms' productivity through various channels such as imitation. Such positive effects might be larger in areas with more productive MNEs. Therefore, it becomes important for host countries to know how much productive firms are likely to invest in them. The rest of this paper is organized as follows. Section 2 takes a brief look at the worldwide distribution of Japanese overseas affiliates. Section 3 provides an empirical model to examine their location choice, and lastly, we discuss future works to estimate our model.

Análisis de la aplicación de Soldadura de acero de calidad "A" mediante láser de Neodimio-YAG en construcción naval

El proceso de soldadura por láser desarrollado en los últimos años ha puesto de manifiesto las posibilidades de aplicación de esta tecnología en diferentes sectores productivos, principalmente en la industria automovilística, en la cual se han demostrado sus ventajas en términos de productividad, eficiencia y calidad. El uso de la tecnología láser, ya sea híbrida o pura, reduce el input térmico al limitar la zona afectada por el calor, sin crear deformaciones y, por tanto, disminuye los re-trabajos post-soldadura necesarios para eliminarlas. Asimismo, se aumenta la velocidad de soldadura, incrementando la productividad y calidad de las uniones. En la última década, el uso de láseres híbridos, (láser + arco) de gran potencia de Neodimio YAG, (Nd: YAG) ha sido cada vez más importante. La instalación de este tipo de fuentes de láser sólido de gran potencia ha sido posible en construcción naval debido a sus ventajas con respecto a las instalaciones de láser de C02 existentes en los astilleros que actualmente utilizan esta tecnología. Los láseres de C02 están caracterizados por su gran potencia y la transmisión del haz a través de espejos. En el caso de las fuentes de Nd:YAG, debido a la longitud de onda a la cual se genera el haz láser, su transmisión pueden ser realizada a través de fibra óptica , haciendo posible la utilización del cabezal láser a gran distancia de la fuente, aparte de la alternativa de integrar el cabezal en unidades robotizadas. El proceso láser distribuye el calor aportado de manera uniforme. Las características mecánicas de dichas uniones ponen de manifiesto la adecuación de la soldadura por láser para su uso en construcción naval, cumpliendo los requerimientos exigidos por las Sociedades de Clasificación. La eficiencia energética de los láseres de C02, con porcentajes superiores al 20%, aparte de las ya estudiadas técnicas de su instalación constituyen las razones por las cuales este tipo de láser es el más usado en el ámbito industrial. El láser de gran potencia de Nd: YAG está presente en el mercado desde hace poco tiempo, y por tanto, su precio es relativamente mayor que el de C02, siendo sus costes de mantenimiento, tanto de lámparas como de diodos necesarios para el bombeo del sólido, igualmente mayores que en el caso del C02. En cambio, el efecto de absorción de parte de la energía en el plasma generado durante el proceso no se produce en el caso del láser de Nd: YAG, utilizando parte de esa energía en estabilizar el arco, siendo necesaria menos potencia de la fuente, reduciendo el coste de la inversión. En función de la aplicación industrial, se deberá realizar el análisis de viabilidad económica correspondiente. Dependiendo de la potencia de la fuente y del tipo de láser utilizado, y por tanto de la longitud de onda a la que se propaga la radiación electromagnética, pueden existen riesgos para la salud. El láser de neodimio se propaga en una longitud de onda, relativamente cercana al rango visible, en la cual se pueden producir daños en los ojos de los operadores. Se deberán establecer las medidas preventivas para evitar los riesgos a los que están expuestos dichos operadores en la utilización de este tipo de energía. La utilización del láser de neodimio: YAG ofrece posibilidades de utilización en construcción naval económicamente rentables, debido su productividad y las buenas características mecánicas de las uniones. Abstract The laser welding process development of the last years shows broad application possibilities in many sectors of industry, mostly in automobile production. The advantages of the laser beam process produce higher productivity, increasing the quality and thermal efficiency. Laser technology, arc-hybrid or pure laser welding, reduces thermal input and thus a smaller heat-affected zone at the work piece. This means less weldment distortion which reduces the amount of subsequent post-weld straightening work that needs to be done. A higher welding speed is achieved by use of the arc and the laser beam, increasing productivity and quality of the joining process. In the last decade use of hybrid technology (laser-GMA hybrid method) with high power sources Nd:YAG lasers, gained in importance. The installation of this type of higher power solid state laser is possible in shipbuilding industrial applications due to its advantages compare with the C02 laser sources installed in the shipyards which use this technology. C02 lasers are characterised by high power output and its beam guidance is via inelastic system of mirrors. In the case of Nd:YAG laser, due to its wavelength, the laser beam can be led by means of a flexible optical fibre even across large distances, which allows three dimensional welding jobs by using of robots. Laser beam welding is a process during which the heat is transferred to the welded material uniformly and the features of the process fulfilled the requirements by Classification Societies. So that, its application to the shipbuilding industry should be possible. The high quantum efficiency of C02 laser, which enabled efficiency factors up to 20%, and relative simple technical possibilities of implementation are the reasons for the fact that it is the most important laser in industrial material machining. High power Nd: YAG laser is established on the market since short time, so that its price is relatively high compared with the C02 laser source and its maintenance cost, lamp or diode pumped solid state laser, is also higher than in the case of C02 lasers. Nevertheless effect of plasma shielding does not exist with Nd:YAG lasers, so that for the gas-shielding welding process the optimal gases can be used regarding arc stability, thus power source are saved and the costs can be optimised. Each industrial application carried out needs its cost efficiency analysis. Depending on the power output and laser type, the dangerousness of reflected irradiation, which even in some meters distance, affects for the healthy operators. For the YAG laser process safety arrangements must be set up in order to avoid the laser radiation being absorbed by the human eye. Due to its wavelength of radiation, being relatively close to the visible range, severe damage to the retina of the eye is possible if sufficient precautions are not taken. Safety aspects are of vital importance to be able to shield the operator as well as other personal. The use of Nd:YAG lasers offers interesting and economically attractive applications in shipbuilding industry. Higher joining rates are possible, and very good mechanical/technological parameters can be achieved.

Changes in rumen microbes in sheep in response to dietary forage quality and relationships with fermentation characteristics

An in vitro experiment was carried out using the Hohenheim gas production technique to evaluate 24-h gas production, apparently and truly degraded dry matter (DM), partitioning factor (PF), short chain fatty acids, crude protein (CP) and carbohydrate (CHO) fractionation of grass and multipurpose tree species (MPTS) foliage diets. Four grasses and three MPTS were used to formulate 12 diets of equal mixtures (0.5:0.5 on DM basis) of each grass with each MPTS. In vitro gas production was terminated after 24 h for each diet. True DM degradability was measured from incubated samples and combined with gas volume to estimate PF. Diets had greater (P<0.001) CP (102–183 g/kg DM) content than sole grasses (66–131 g/kg DM) and lower (P<0.001) concentrations of fibre fractions. Contrary to in vitro apparently degraded DM, in vitro truly degraded DM coefficient was greater (P<0.001) in diets (0.63–0.77) than in sole grasses (0.48–0.68). The PF was on average higher in diets than in sole grasses. The proportion of potentially degradable CP fractions (A1, B1, B2 and B3, based on the Cornell Net Carbohydrate and Protein System) in the diets ranged from 971 to 989 g/kg CP. Crude protein fractions, A and B2 were greater in diets but B1 and B3 fractions were less in diets than in sole grasses. A similar trend was also observed in the CHO fractions. Results showed that the nutritive value of the four grasses was improved when MPTS leaves were incorporated into the diet and this could ensure higher productivity of the animals.

Extratos de Ascophyllum nodosum no tratamento de sementes de milho e soja: avaliações fisiológicas e moleculares

A obtenção de uma lavoura com população adequada de plantas depende da utilização de diferentes práticas agronômicas, estando o sucesso condicionado ao uso de sementes de boa qualidade. No entanto, a semeadura dificilmente é realizada em condições ideais o que resulta em problemas na emergência das plantas. Grande é a procura por alternativas que melhorem a germinação e o desenvolvimento inicial dos cultivos resultando em uniformidade de emergência, garantindo o estande e culminando em produção. O tratamento de sementes com agroquímicos fitossanitários é uma solução parcial no combate de agentes fitopatológicos e pragas, mas poucas são as soluções adotadas para melhorar o desenvolvimento vegetal inicial, que pode levar a desuniformidade e falhas no estande gerando prejuízos econômicos. Os extratos de algas já demonstraram em diversos estudos sua eficiência no desenvolvimento vegetal quando aplicados em plantas. Porém poucos são os estudos voltados para os efeitos dos extratos de algas na germinação e emergência. Assim, o intuito deste trabalho foi testar o extrato comercial de Ascophyllum nodosum, e diferentes fracionamentos do mesmo, no tratamento de sementes de soja e milho. Avaliou-se o efeito de diferentes doses no desenvolvimento das plântulas e as doses de melhor resposta foram utilizadas no tratamento de sementes de soja a fim de associar as respostas obtidas à expressão gênica de 9 genes relacionados ao processo germinativo em 24 e 48h de embebição. Sementes de soja tratadas com o extrato comercial resultaram em plântulas menos desenvolvidas o que pode estar relacionado ao alto teor de sais contidos no produto. O tratamento com as demais frações favoreceu o desenvolvimento das plântulas, principalmente o desenvolvimento radicular. Sementes de milho tratadas não apresentaram desenvolvimento tão satisfatório quanto as sementes de soja tratadas. A análise da expressão gênica relativa demonstrou que o tratamento com frações do extrato comercial é capaz de regular algumas vias do metabolismo hormonal, como a isopentenil transferase e a GA20 oxidase 2, e do catabolismo de reservas, como a acil-CoA oxidase. Em condições ótimas, o tratamento de sementes de soja com frações do extrato comercial de A. nodosum favoreceu o desenvolvimento inicial das plântulas de soja, no entanto não ocasionou grandes alterações no desenvolvimento de milho. Este estudo demonstrou a possibilidade de utilização de frações do extrato de A. nodosum no favorecimento do desenvolvimento inicial de plântulas de soja. Maiores estudos são necessários quanto às respostas em campo e na atenuação de estresses para viabilizar seu uso como um bioestimulante em sementes.

Suplementação luminosa no tomateiro cultivado em diferentes sistemas de condução em ambiente protegido

O auto sombreamento das folhas posicionadas nas porções inferiores do dossel de plantas pode limitar a produtividade em cultivos tutorados. Assim, a produtividade do tomateiro pode ser aumentada por meio da suplementação luminosa posicionada no interior do dossel, técnica conhecida como interlighting. O sistema de condução do tomateiro também interfere na distribuição da radiação solar, além de afetar os tratos culturais, a competição intra e entre plantas e a relação entre as partes vegetativas e reprodutivas. Desta forma, o objetivo deste trabalho foi avaliar a influência do sistema de condução de minitomate cultivar \'Sweet Grape\' em diferentes números de hastes por planta (duas, três e quatro hastes) e da suplementação luminosa com módulos de LED na produtividade e qualidade dos frutos, na eficiência do uso de água e nutrientes, além da morfologia das plantas e fatores relacionados ao manejo cultural, em ambiente protegido nas condições climáticas do sudeste brasileiro. Ao longo do ciclo de cultivo foram avaliados os seguintes parâmetros: volume irrigado, pH, condutividade elétrica, porcentagem e volume da solução drenada pelos vasos. As colheitas foram realizadas semanalmente, a partir de 90 dias após o transplante. Os frutos colhidos foram classificados, contados e pesados para a obtenção do número e massa de frutos grandes, médios, pequenos, comercial, não comercial e total. Amostras de frutos e tecidos foliares foram coletadas em cinco períodos e avaliadas quanto ao teor de sólidos solúveis, pH, acidez titulável e concentração de ácido ascórbico nos frutos e teor de nutrientes nas folhas. Além disso, ao final do ciclo cultural, foram realizadas as medições dos seguintes parâmetros morfológicos nas plantas: comprimento de hastes, número de cachos normais e bifurcados por hastes e diâmetro apical, mediano e basal das hastes. A suplementação luminosa apresentou aumento no número e na massa de frutos grandes e médios, elevando a produtividade total em 12%. Plantas com duas e três hastes apresentaram maior acúmulo de massa total de frutos, porém plantas com três hastes apresentaram maior massa de frutos não comerciais, com redução na massa de frutos comerciais. A maior eficiência no uso de água e nutrientes foi alcançada em plantas cultivadas com duas hastes. Plantas com quatro hastes demandaram mais solução nutritiva comparada às plantas com duas e três hastes. Esta maior demanda de solução, acarretou em aumento da condutividade elétrica da solução drenada. Plantas com quatro hastes apresentaram maiores teores de sólidos solúveis nos frutos. A suplementação luminosa também resultou em aumento do teor de sólidos solúveis e ligeiro aumento no teor de ácido ascórbico nos frutos. A suplementação luminosa favoreceu o acúmulo de nitrogênio, fósforo e potássio nas folhas do tomateiro. Desta forma, conclui-se que a suplementação luminosa é uma estratégia de manejo tecnicamente viável nas condições climática estudada. O sistema de condução de haste afeta a produtividade e qualidade dos frutos do tomateiro. Plantas com duas hastes além de apresentar maior produtividade de frutos comerciais, mostrou-se a estratégia mais eficiente no uso da água e nutrientes.

Manufacturing Europe's Future. Bruegel Blueprint 21, 2 October 2013

‘Industrial policy is back!’ This is the message given in the European Commission’s October 2012 communication on industrial policy (COM (2012) 582 final), which seeks to reverse the declining role of the manufacturing industry, and increase its share of European Union GDP from about 16 percent currently to above 20 percent. Historical evidence suggests that the goal is unlikely to be achieved. Manufacturing’s share of GDP has decreased around the world over the last 30 years. Paradoxically, this relative decline has been a reflection of manufacturing’s strength. Higher productivity growth in manufacturing than in the economy overall resulted in relative decline. A strategy to reverse this trend and move to an industrial share of above 20 percent might therefore risk undermining the original strength of industry – higher productivity growth. This Blueprint therefore takes a different approach. It starts by looking in depth into the manufacturing sector and how it is developing. It emphasises the extent to which European industry has become integrated with other parts of the economy, in particular with the increasingly specialised services sector, and how both sectors depend on each other. It convincingly argues that industrial activity is increasingly spread through global value chains. As a result, employment in the sector has increasingly become highly skilled, while those parts of production for which high skill levels are not needed have been shifted to regions with lower labour costs.

(Table 1) Geochemistry of sediment core NS93-5

The biogenic-related elements Ca, Sr, Ba, P, Cd, scavenged Al, and Ti were analyzed by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) for Core NS93-5 from the west slope of the South China Sea. Terrestrial input as estimated from the accumulation of Ti was higher during glacials than during interglacials. Carbonate accumulation rates are inversely related to those of terrestrial input, suggesting higher production of calcareous phytoplankton during interglacials. The accumulation patterns of authigenic Sr, Ba, P, and Cd match that of carbonate, further indicating higher calcareous phytoplankton production during interglacials. Scavenged Al and excess SiO2, which is related to biogenic opal, exhibit higher accumulation rates during glacials and correspond with changes in terrestrial input. This indicates that terrestrial input driven is important to siliceous phytoplankton production but not for calcareous phytoplankton production. As calcareous phytoplankton is the dominant component of the biogenic sediments in the South China Sea, particularly during interglacials, previous inference of higher productivity in the South China Sea during glacials based on only the biogenic opal proxy needs to be reconsidered.

Stable carbon and nitrogen isotope composition of organic matter in sediments of the Oman Margin

Stable isotopic compositions of carbon and nitrogen and organic carbon content of sediments ranging from the Pliocene to the Pleistocene-Holocene in age from the Oman Margin (ODP Sites 724 and 725) are reported. In general, the organic carbon content is greater than 2% at Site 724. Prior to the Pleistocene-Holocene at this site, sediments with higher content of organic matter were deposited owing to favorable preservation conditions and/or higher productivity. In the Pleistocene, lower amounts of organic matter have been preserved; this material generally has more enriched nitrogen isotopic compositions. This may indicate intensification of the Oxygen Minimum Zone and denitrification with the onset of the Pleistocene. A correlation of carbon isotope content of these sediments with oxygen isotope stages at Site 724 indicates an enrichment in 13C during glacial events. Based on the stable isotope evidence of both carbon and nitrogen, there does not appear to be major input of terrigenous-derived allochthonous material in this marine environment. The timing and extent of monsoon winds on the productivity of this region are not evident, but require further studies for collaborative interpretation of small-scale features in the isotopic and carbon content of this environment.

Geochemistry of sediments from the upwelling off Morocco

The high-productive upwelling area off Morocco is part of one of the four major trade-wind driven continental margin upwelling zones in the world oceans. While coastal upwelling occurs mostly on the shelf, biogenic particles derived from upwelling are deposited mostly at the upper continental slope. Nutrient-rich coastal water is transported within the Cape Ghir filament region at 30°N up to several hundreds of kilometers offshore. Both upwelling intensity and filament activity are dependent on the strength of the summer Trades. This study is aimed to reconstruct changes in trade wind intensity over the last 250,000 years by the analysis of the productivity signal contained in the sedimentary biogenic particles of the continental slope and beneath the Cape Ghir filament. Detailed geochemical and geophysical analyses (TOC, carbonate, C/N, delta13Corg, delta15N, delta13C of benthic foraminifera, delta18O of benthic and planktic foraminifera, magnetic susceptibility) have been carried out at two sites on the upper continental slope and one site located further offshore influenced by the Cape Ghir filament. A second offshore site south of the filament was analyzed (TOC, magnetic susceptibility) to distinguish the productivity signal related to the filament signal from the general offshore variability. Higher productivity during glacial times was observed at all four sites. However, the variability of productivity during glacial times was remarkably different at the filament-influenced site compared to the upwelling-influenced continental slope sites. In addition to climate-related changes in upwelling intensity, zonal shifts of the upwelling area due to sea-level changes have impacted the sedimentary productivity record, especially at the continental slope sites. By comparison with other proxies related to the strength and direction of the prevailing winds (Si/Al ratio as grain-size indicator, pollen) the productivity record at the filament-influenced site reflects mainly changes in trade-wind intensity. Our reconstruction reveals that especially during glacial times trade-wind intensity was increased and showed a strong variability with frequencies related to precession.