Mononuclear single helices of lanthanum(III) and europium(III). Metal dependent diastereomeric excess

Using the 1: 2 condensate of benzildihydrazone and 2-acetylpyridine as a tetradentate N donor ligand L, LaL(NO3)(3) (1) and EuL(NO3)(3) (2), which are pale yellow in colour, are synthesized. While single crystals of 1 could not be obtained, 2 crystallises as a monodichloromethane solvate, 2 center dot CH2Cl2 in the space group Cc with a = 11.7099(5) angstrom, b = 16.4872(5) angstrom, c = 17.9224(6) angstrom and beta = 104.048(4)degrees. From the X-ray crystal structure, 2 is found to be a rare example of monohelical complex of Eu(III). Complex 1 is diamagnetic. The magnetic moment of 2 at room temperature is 3.32 BM. Comparing the FT-IR spectra of 1 and 2, it is concluded that 1 also is a mononuclear single helix. H-1 NMR reveals that both 1 and 2 are mixtures of two diastereomers. In the case of the La(III) complex (1), the diastereomeric excess is only 10% but in the Eu(III) complex 2 it is 80%. The occurrence of diastereomerism is explained by the chiralities of the helical motif and the type of pentakis chelates present in 1 and 2.

Can adherence to dietary guidelines address excess caloric intake? An empirical assessment for the UK

The facilitation of healthier dietary choices by consumers is a key element of government strategies to combat the rising incidence of obesity in developed and developing countries. Public health campaigns to promote healthier eating often target compliance with recommended dietary guidelines for consumption of individual nutrients such as fats and added sugars. This paper examines the association between improved compliance with dietary guidelines for individual nutrients and excess calorie intake, the most proximate determinant of obesity risk. We apply quantile regressions and counterfactual decompositions to cross-sectional data from the National Diet and Nutrition Survey (2000-01) to assess how excess calorie consumption patterns in the UK are likely to change with improved compliance with dietary guidelines. We find that the effects of compliance vary significantly across different quantiles of calorie consumption. Our results show that compliance with dietary guidelines for individual nutrients, even if successfully achieved, is likely to be associated with only modest shifts in excess calorie consumption patterns. Consequently, public health campaigns that target compliance with dietary guidelines for specific nutrients in isolation are unlikely to have a significant effect on the obesity risk faced by the population.

Eye candy for the blind: re-introducing Lyotard's Acinema into discourses on excess, motion and spectacle in contemporary Hollywood

Jean-François Lyotard's 1973 essay ‘Acinema’ is explicitly concerned with the cinematic medium, but has received scant critical attention. Lyotard's acinema conceives of an experimental, excessive form of film-making that uses stillness and movement to shift away from the orderly process of meaning-making within mainstream cinema. What motivates this present paper is a striking link between Lyotard's writing and contemporary Hollywood production; both are concerned with a sense of excess, especially within moments of motion. Using Charlie's Angels (McG, 2000) as a case study – a film that has been critically dismissed as ‘eye candy for the blind’ – my methodology brings together two different discourses, high culture theory and mainstream film-making, to test out and propose the value of Lyotard's ideas for the study of contemporary film. Combining close textual analysis and engagement with key scholarship on film spectacle, I reflexively engage with the process of film analysis and re-direct attention to a neglected essay by a major theorist, in order to stimulate further engagement with his work.

Access and excess in The Texas Chain Saw Massacre

Much is made of the viscerally disturbing qualities embedded in The Texas Chain Saw Massacre - human bodies are traumatised, mutilated and distorted – and the way these are matched by close and often intense access to the performers involved. Graphic violence focused on the body specifically indicates the film as a key contemporary horror text. Yet, for all this closeness to the performers, it soon becomes clear in undertaking close-analysis of the film that access to them is equally characterised by extreme distance, both spatially and cognitively. The issue of distance is particularly striking, not least because of its ramifications on engagement, which throws up various aesthetic and methodological questions concerning performers’ expressive authenticity. This article considers the lack of access to performance in The Texas Chain Saw Massacre, paying particular attention to how this fits in with contemporaneous presentations of performance more generally, as seen in films such as Junior Bonner (Sam Peckinpah, 1972). As part of this investigation I consider the affect of such a severe disruption to access on engagement with, and discussion of, performance. At the heart of this investigation lie methodological considerations of the place of performance analysis in the post-studio period. How can we perceive anything of a character’s interior life, and therefore engage with performers who we fundamentally lack access to? Does such an apparently significant difference in the way performers and their embodiment is treated mean that they can even be thought of as delivering a performance?

Imagining multicultural London: containment and excess in snatch

Snatch (Guy Ritchie, 2000) is a comic-book gangster film that can be seen to represent the backlash against perceived notions of political correctness in what is effectively a public-schoolboy fantasy of working-class life in East London. However, the film also delineates the limits of this backlash in its depiction of minorities as either contained or excess. This is highlighted through the comic-book genre itself as well as the characterization. Thus this article explores the tension between the genre, representation and Jewish identity.

Climatic risks and impacts in South Asia: extremes of water scarcity and excess

This paper reviews the current knowledge of climatic risks and impacts in South Asia associated with anthropogenic warming levels of 1.5°C to 4°C above pre-industrial values in the 21st century. It is based on the World Bank Report “Turn Down the Heat, Climate Extremes, Regional Impacts and the Case for Resilience” (2013). Many of the climate change impacts in the region, which appear quite severe even with relatively modest warming of 1.5–2°C, pose significant hazards to development. For example, increased monsoon variability and loss or glacial meltwater will likely confront populations with ongoing and multiple challenges. The result is a significant risk to stable and reliable water resources for the region, with increases in peak flows potentially causing floods and dry season flow reductions threatening agriculture. Irrespective of the anticipated economic development and growth, climate projections indicate that large parts of South Asia’s growing population and especially the poor are likely to remain highly vulnerable to climate change.

Effect of polyol excess on the electrical property of vegetable-polyurethane film

Freestanding castor oil-based polyurethane (PU) film was obtained using spin-coating method. The effect of polyol content was analysed by means of thermally stimulated depolarisation current and AC dielectric measurements techniques. Two relaxation peaks were observed in the temperature range of -40 to 60 degrees C for PU with different polyol contents. The presence of polyol excess provides a shift to lower temperature of the a relaxation and the decrease in the activation energy of the transition in this region might be attributed to the plasticising effect of the polyol. The peak at higher temperature is due to the Maxwell-Wagner-Sillars relaxation, which also shifts in the low temperature direction as the polyol content is increased.

Do options contain information about excess bond returns ?

There is strong empirical evidence that risk premia in long-term interest rates are time-varying. These risk premia critically depend on interest rate volatility, yet existing research has not examined the im- pact of time-varying volatility on excess returns for long-term bonds. To address this issue, we incorporate interest rate option prices, which are very sensitive to interest rate volatility, into a dynamic model for the term structure of interest rates. We estimate three-factor affine term structure models using both swap rates and interest rate cap prices. When we incorporate option prices, the model better captures interest rate volatility and is better able to predict excess returns for long-term swaps over short-term swaps, both in- and out-of-sample. Our results indicate that interest rate options contain valuable infor- mation about risk premia and interest rate dynamics that cannot be extracted from interest rates alone.

Effect of polyol excess on the electrical property of vegetable-polyurethane film

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphology and bacterial colonisation of tooth/ceramic restoration interface after different cement excess removal techniques

Objectives: To evaluate the influence of different protocols for resin cement removal during cementation on biofilm formation.Methods: Twenty-eight ceramic blocks, which were injected under pressure, were placed over enamel blocks obtained from freshly extracted bovine incisors. The ceramic blocks were cemented to the enamel blocks using a dual-cured resin cement and the excess resin was removed according to the experimental group: TS: Teflon spatula; BR: brush; BR+: brush and polishing; SB+: scalpel blade and polishing. After autoclaving, the samples were colonised by incubation in a sucrose broth suspension standardised with Streptococcus mutans in microaerophilic stove. Specimens were quantitatively analysed for bacterial adherence at the adhesive interface using confocal laser scanning microscopy and counting the colony forming units, and qualitatively analysed using SEM. The roughness (Ra/Rz/RSm) was also analysed. Data were analysed by 1-way ANOVA and Tukey's test (5%).Results: The roughness values ranged from 0.96 to 1.69 mu m for Ra (p > 0.05), from 11.59 to 22.80 mu m for Rz (p = 0.02 < 0.05) and from 293.2 to 534.3 mu m for RSm (p = 0.00). Bacterial adhesion varied between 1,974,000 and 2,814,000 CFU/ml (p = 0.00). Biofilm mean thickness ranged from 0.477 and 0.556 mu m (p > 0.05), whilst the biovolume values were between 0.388 and 0.547 mu m(3)/mu m(2) (p = 0.04). Lower values for roughness, bacterial adhesion, biofilm thickness and biovolume were found with BR, whilst TS presented the highest values for most of the parameters. SEM images confirmed the quantitative values.Conclusions: The restoration margin morphology and interface roughness affects bacterial accumulation. The brush technique promoted less bacterial colonisation at the adhesive interface than did the other removal methods.Clinical significance: The brush technique seems to be a good option for removing the excess resin cement after adhesive cementation in clinical practice, as indicated by its better results with lower bacterial colonisation. (C) 2012 Elsevier Ltd. All rights reserved.

Effect of the excess of bismuth on the morphology and properties of the BaBi2Nb2O9 thin films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)