Occupational risk in a glass manufacturing industry unit

Risk assessment is one of the main pillars of the framework directive and other directives in respect of health and safety. It is also the basis of an effective management of safety and health as it is essential to reduce work-related accidents and occupational diseases. To survey the hazards eventually present in the workplaces the usual procedures are i) gathering information about tasks/activities, employees, equipment, legislation and standards; ii) observation of the tasks and; iii) quantification of respective risks through the most adequate risk assessment among the methodologies available. From this preliminary evaluation of a welding plant and, from the different measurable parameters, noise was considered the most critical. This paper focus not only the usual way of risk assessment for noise but also another approach that may allow us to identify the technique with which a weld is being performed.

A case study undertaken recycling & reuse of glass fiber reinforced thermoset polumer wastes of composite materials industry

Glass fibre-reinforced plastics (GFRP) have been considered inherently difficult to recycle due to both: crosslinked nature of thermoset resins, which cannot be remoulded, and complex composition of the composite itself. Presently, most of the GFRP waste is landfilled leading to negative environmental impacts and supplementary added costs. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, efforts were made in order to recycle grinded GFRP waste, proceeding from pultrusion production scrap, into new and sustainable composite materials. For this purpose, GFRP waste recyclates, were incorporated into polyester based mortars as fine aggregate and filler replacements at different load contents and particle size distributions. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified polymer mortars. Results revealed that GFRP waste filled polymer mortars present improved flexural and compressive behaviour over unmodified polyester based mortars, thus indicating the feasibility of the GFRP industrial waste reuse into concrete-polymer composite materials.

Glass in Cultural Heritage – An Introduction

Proceedings of the Chemistry and Conservation Science

Real fábrica de vidros de Coina – Chemical analysis of archaeological glass fragments

Actas do 17º Congresso da Associação Internacional para a História do Vidro

Uranium glass in museum collections

Journal of Cultural Heritage, nº 9 (2008), p. 64-68

A disposable glass-based immunosensor for monitoring the cancer biomarker CEA in urine

NanoPT 2014 International Conference, in Portugal, on February 12-14. Poster presentation based on topic Nanobio/Nanomedicine

Dielectric study of triton X100: a glass-forming liquid

Dissertação para obtenção do grau de mestre em Engenharia de Materiais

Using glass-fibre reinforced polymer composites in the production of sustainable water storage vessels

The present work focuses on the use of the life cycle assessment (LCA) and life cycle costing (LCC)methodologies to evaluate environmental and economic impacts of polymers and polymer composites materials and products. Initially a literature review is performed in order to assess the scope and limitations of existing LCA and LCC studies on these topics. Then, a case study, based on the production of a water storage glass-fibre reinforced polymer (GFRP) composite storage tank, is presented. The storage tank was evaluated via a LCA/LCC integrated model, a novel way of analysing the life cycle (LC) environmental and economic performances of structural products. The overarching conclusion of the review is that the environmental and economic performances of polymers composites in non-mobile applications are seldom assessed and never in a combined integrated way.

Energy harvesting device based on a metallic glass/PVDF magnetoelectric laminated composite

A flexible and low cost energy harvester device based on the magnetoelectric (ME) effect has been designed using Fe64Co17Si7B12 as amorphous magnetostrictive ribbons and PVDF as the piezoelectric element. Sandwich-type laminated composite of 3 cm long has been fabricated by gluing these ribbons to the PVDF with the Devcon 5 minute epoxy. Good power output and power density of 6.4 μW and 1.5 mW/cm3, respectively, have been obtained through a multiplier circuit. All values have been measured at the magnetomechanical resonance of the laminate. The effect of the length of the ME laminate on the power output has been also studied, exhibiting a decay as the length of the ME laminate does. Nevertheless, good performance of such device has been obtained for a 0.5 cm long device, working already at 337 KHz, within the low radio frequency (LRF) range.

Metallic glass/PVDF magnetoelectric energy harvester working up to the radiofrequency range

Companies and researchers involved in developing miniaturized electronic devices face the basic problem of the needed batteries size, finite life of time and environmental pollution caused by their final deposition. The current trends to overcome this situation point towards Energy Harvesting technology. These harvesters (or scavengers) store the energy from sources present in the ambient (as wind, solar, electromagnetic, etc) and are costless for us. Piezoelectric devices are the ones that show a higher power density, and materials as ceramic PZT or polymeric PVDF have already demonstrated their ability to act as such energy harvester elements. Combinations between piezoelectric and electromagnetic mechanism have been also extensively investigated. Nevertheless, the power generated by these combinations is limited under the application of small magnetic fields, reducing the performance of the energy harvester [1]. In the last years the appearance of magnetoelectric (ME) devices, in which the piezoelectric deformation is driven by the magnetostrictive element, enables to extract the energy of very small electromagnetic signals through the generated magnetoelectric voltage at the piezoelectric element. However, very little work has been done testing PVDF polymer as piezoelectric constituent of the ME energy harvester device, and only to be proposed as a possibility of application [2]. Among the advantages of using piezopolymers for vibrational energy harvesting we can remember that they are ductile, resilient to shock, deformable and lightweight. In this work we demonstrate the feasibility of using magnetostrictive Fe-rich magnetic amorphous alloys/piezoelectric PVDF sandwich-type laminated ME devices as energy harvesters. A very simple experimental set-up will show how these laminates can extract energy, in amounts of μW, from an external AC field.

Mechanical properties of polypropylene/natural fiber composites: comparison with glass fiber

Natural Fiber Composites based on polypropylene have gained increasing interest over the past two decades, both in the scientific and industry communities. In this study, the mechanical properties of polypropylene (PP)/natural fiber composites were studied and compared with those of polypropylene reinforced by glass fiber. Flax and jute woven fabrics have been used. PP/glass fiber composites showed better performance in terms of tensile properties.

Estudo da ligação entre componentes estruturais de GFRP (glass fiber reinforced polymer) e componentes estruturais em betão

Dissertação de mestrado integrado em Engenharia Civil

Caracterización de biotipos ovinos en relación a su producción de carne y lana en dos áreas de la provincia de Córdoba . Characterization of sheep biotypes in relation to the mutton and wool production in two areas into province of Córdoba.

Si bien las existencias ovinas en Córdoba son solo un 15% menores que las caprinas, esta producción no ha tenido igual énfasis en el desarrollo de proyectos de investigación, desarrollo y/o extensión. No obstante, las nuevas circunstancias productivas y las leyes de promoción han generado el desarrollo de emprendimientos comerciales que incluyen esta producción. Siendo una población ovina residual, en su gran mayoría está compuesta de majadas con base criolla y cruzas diversas con razas estandarizadas, frente a lo cual parecería que la problemática productiva de carne y lana tiene una seria limitante. Sin embargo, las experiencias en otros lugares del país y en otros paises confirma una buena alternativa de producción de carne de corderos pesados y lana para tapicería con cruzas y poblaciones primarias. Esto plantea la hipótesis que el desarrollo de sistemas de producción ovina basada en corderos livianos y/o pesados se complementa con la producción de lana para tapicería. El objetivo general de este proyecto es: evaluar biológica y económicamente biotipos ovinos ya criados en dos áreas de la provincia, en relación a la producción de carne y lana a través de estudios de estructuras de poblaciones y ensayos específicos, con la finalidad de conocer la posible rentabilidad en cada caso. El proyecto se va a desarrollar en dos localidades con carcacterísticas agroecológicas distintas: llanura con producción agrícola (Grupo Cambio Rural Los Pecorinos, Villa María) y pastizales de altura (Asociación de Arrendatarios de Pampa de Olaen, La Falda). Inicialmente se van a desarrollar estudios de estructura productiva en carne y lana e identificación de biotipos específicos y luego se va a desarrollar un ensayo de engorde de corderos destetados, evaluación de la producción de lana, del crecimiento y faena para evaluar calidad de canal y calidad de carne para dos categorias: livianos(2 meses edad de faena) y pesados (5 meses). Este proyecto pretende demostrar la factibilidad de producir corderos pesados en las condiciones actuales y con los biotipos existentes, cumpliementando el ingreso con la producción de lana de excelente calidada para la confección de alfombras, lo cual no deberías de ser incompatible entre sí (carne-lana).

Caracterización zootécnica y genética de poblaciones primarias de ovinos productores de lana. Zoothechnical and genetic characterization of primary populations of producing wool ovines.

Desde el tiempo de la conquista y colonización en siglo XVI, el territorio argentino fue poblado por especies exóticas entre ellas ovinos. El tipo de animal introducido al territorio determinó la formación poblaciones locales del tipo criollo donde en el caso de los ovinos pertenecían al tipo lanero. Actualmente dichas poblaciones se encuentran relegadas y la mayoría en manos de pequeños productores. En base a estudios previos se puede afirmar que constituirían un material genético de importante variabilidad y de un potencial textil importante. El proyecto pretende realizar una caracterización zootécnica y genética mediante relevamientos poblacionales en regiones donde aún se conserva material autóctono o local del tipo criollo. El relevamiento comprende un posicionamiento geográfico y breve descripción del sistema de producción, la toma de información biológica, morfológica y zoométrica de los animales de la majada y la correspondiente obtención de muestras de lana. Estas muestras son remitidas al Laboratorio de Fibras Animales de la Red SUPPRAD para su evaluación. Para determinar la variabilidad zootécnica y genérica de las poblaciones se confeccionan Índices de arcaísmo o primariedad basados en marcadores fenotípicos, bioquímicos y moleculares. A ello se propone incorporar estudios sobre desempeño productivo y reproductivo de las poblaciones para poner analizar los factores que afectan la producción de lana y diseñar estrategias de manejo que la optimicen. Ello posibilitará evaluar la variabilidad de las poblaciones y proponer estrategias de conservación y/o mejoramiento. Paralelamente se podrá establecer el destino del producto textil producido por dichas poblaciones ovinas.

pressure resistance of hollow glass fibers at internal pressure load

Otto-von-Guericke-Universität Magdeburg, Fakultät für Maschinenbau, Univ., Dissertation, 2015