Design of sway frames

The aim of the work presented in this thesis is to produce a direct method to design structures subject to deflection constraints at the working loads. The work carried out can be divided into four main parts. In the first part, a direct design procedure for plane steel frames subjected to sway limitations is proposed. The stiffness equations are modified so that the sway in each storey is equal to some specified values. The modified equations are then solved by iteration to calculate the cross-sectional properties of the columns as well as the other joint displacements. The beam sections are selected initially and then altered in an effort to reduce the total material cost of the frame. A linear extrapolation technique is used to reduce this cost. In this design, stability functions are used so that the effect of axial loads in the members are taken into consideration. The final reduced cost design is checked for strength requirements and the members are altered accordingly. In the second part, the design method is applied to the design of reinforced concrete frames in which the sway in the columns play an active part in the design criteria. The second moment of area of each column is obtained by solving the modified stiffness equations and then used to calculate the mlnlmum column depth required. Again the frame has to be checked for all the ultimate limit state load cases. In the third part, the method is generalised to design pin-jointed space frames for deflection limitatlions. In these the member areas are calculated so that the deflection at a specified joint is equal to its specified value. In the final part, the Lagrange multiplier technique is employed to obtain an optimum design for plane rigidly jointed steel frames. The iteration technique is used here to solve the modified stiffness equations as well as derivative equations obtained in accordance to the requirements of the optimisation method.

Early visual detection of oriented line targets: spatial characteristics,and reference frames of early visual orientation-processing

The orientations of lines and edges are important in defining the structure of the visual environment, and observers can detect differences in line orientation within the first few hundred milliseconds of scene viewing. The present work is a psychophysical investigation of the mechanisms of early visual orientation-processing. In experiments with briefly presented displays of line elements, observers indicated whether all the elements were uniformly oriented or whether a uniquely oriented target was present among uniformly oriented nontargets. The minimum difference between nontarget and target orientations that was required for effective target-detection (the orientation increment threshold) varied little with the number of elements and their spatial density, but the percentage of correct responses in detection of a large orientation-difference increased with increasing element density. The differing variations with element density of thresholds and percent-correct scores may indicate the operation of more than one mechanism in early visual orientation-processIng. Reducing element length caused threshold to increase with increasing number of elements, showing that the effectiveness of rapid, spatially parallel orientation-processing depends on element length. Orientational anisotropy in line-target detection has been reported previously: a coarse periodic variation and some finer variations in orientation increment threshold with nontarget orientation have been found. In the present work, the prominence of the coarse variation in relation to finer variations decreased with increasing effective viewing duration, as if the operation of coarse orientation-processing mechanisms precedes the operation of finer ones. Orientational anisotropy was prominent even when observers lay horizontally and viewed displays by looking upwards through a black cylinder that excluded all possible visual references for orientation. So, gravitational and visual cues are not essential to the definition of an orientational reference frame for early vision, and such a reference can be well defined by retinocentric neural coding, awareness of body-axis orientation, or both.

Identifying frames:a comparison of research methods

Framing plays an important role in public policy. Interest groups strategically highlight some aspects of a policy proposal while downplaying others in order to steer the policy debate in a favorable direction. Despite the importance of framing, we still know relatively little about the framing strategies of interest groups due to methodological difficulties that have prevented scholars from systematically studying interest group framing across a large number of interest groups and multiple policy debates. This article therefore provides an overview of three novel research methods that allow researchers to systematically measure interest group frames. More specifically, this article introduces a word-based quantitative text analysis technique, a manual, computer-assisted content analysis approach and face-to-face interviews designed to systematically identify interest group frames. The results generated by all three techniques are compared on the basis of a case study of interest group framing in an environmental policy debate in the European Union.

Africa through Chinese eyes: new frames or the same old lens? African news in English from China Central Television, compared with the BBC

[No abstract as this is a book chapter: the following represents the first 2 paragraphs.] The screen fills with close-ups of smiling African faces against a black-and-orange background: the carefree child, the gap-toothed man with smoke curling from his pipe. The faces retreat into an outline of a map of Africa as the saccharine background music dissolves into birdsong. The silhouette of an acacia tree appears. This is not the much-derided Western romantic stereotype of the continent: it is an extract from a promotional trailer on CCTV Africa, the embodiment of China’s “soft power” drive and a spearhead of Chinese state television’s overseas expansion. Yet this image is at variance with the English-language channel’s professed ambitions. The Chinese premier, Li Keqiang, himself declared that “CCTV embraces the vision of seeing Africa from an African perspective and reporting Africa from the viewpoint of Africa”. These contradictory messages prompt fundamental questions about CCTV’s expansion into Africa. Are the channel’s English-language news bulletins aimed at African or Chinese viewers? What kind of Africa – and indeed China – do they represent, and could the framing of African events by CCTV News provide an alternative to the perspective of international rivals? Is CCTV’s main mission in Africa to provide news or to act as mouthpiece of the Chinese Communist Party and state? This chapter addresses these questions by applying a cross-cultural variant of framing theory to the news content of CCTV’s Africa Live and that of its closest direct competitor, Focus on Africa from BBC World News TV.

Investigating Social Mobility: Cultural Frames and Cultural Frame Switching in First-Generation College Students

Thesis (Ph.D.)--University of Washington, 2016-08

Interactions between Spider Silk and Cells - NIH/3T3 Fibroblasts Seeded on Miniature Weaving Frames

Background: Several materials have been used for tissue engineering purposes, since the ideal matrix depends on the desired tissue. Silk biomaterials have come to focus due to their great mechanical properties. As untreated silkworm silk has been found to be quite immunogenic, an alternative could be spider silk. Not only does it own unique mechanical properties, its biocompatibility has been shown already in vivo. In our study, we used native spider dragline silk which is known as the strongest fibre in nature. Methodology/Principal Findings: Steel frames were originally designed and manufactured and woven with spider silk, harvesting dragline silk directly out of the animal. After sterilization, scaffolds were seeded with fibroblasts to analyse cell proliferation and adhesion. Analysis of cell morphology and actin filament alignment clearly revealed adherence. Proliferation was measured by cell count as well as determination of relative fluorescence each after 1, 2, 3, and 5 days. Cell counts for native spider silk were also compared with those for trypsin-digested spider silk. Spider silk specimens displayed less proliferation than collagen-and fibronectin-coated cover slips, enzymatic treatment reduced adhesion and proliferation rates tendentially though not significantly. Nevertheless, proliferation could be proven with high significance (p<0.01). Conclusion/Significance: Native spider silk does not require any modification to its application as a biomaterial that can rival any artificial material in terms of cell growth promoting properties. We could show adhesion mechanics on intracellular level. Additionally, proliferation kinetics were higher than in enzymatically digested controls, indicating that spider silk does not require modification. Recent findings concerning reduction of cell proliferation after exposure could not be met. As biotechnological production of the hierarchical composition of native spider silk fibres is still a challenge, our study has a pioneer role in researching cellular mechanics on native spider silk fibres.

The conversation on political issues on Twitter: an analysis of the participation and frames in the debate on the 'Wert law' and evictions in Spain

The aim of this study is to determine which social agents are involved in the political debate on Twitter and whether the interpretive hegemony of actors that have traditionally been the most prominent is tempered by the challenge of framing shared with audiences. The relationship between the interpretations expressed and the profiles of participants is analyzed in comparison with the frames used by mainstream media. The chosen methodology combines content analysis and discourse analysis techniques on a sample of 1,504 relevant tweets posted on two political issues –the approval of the education law LOMCE and the evictions caused by the crisis, which have also been studied in the front pages of four leading newspapers in Spain. The results show a correlation between political issue singularities, frames and the type of discussion depending on the participants.

Rapporto tensore su scalare con gravità indotta: analisi dell’approssimazione di slow-roll nei frames di Jordan e Einstein

L’obbiettivo di questa tesi è quello di analizzare le conseguenze della scelta del frame (Jordan o Einstein) nel calcolo delle proprietà degli spettri primordiali generati dall’inflazione ed in particolare dell’osservabile r (rapporto tensore su scalare) al variare del potenziale del campo che genera l’espansione accelerata. Partendo dalla descrizione della teoria dell’inflazione in relatività generale, focalizzando l’attenzione sui motivi che hanno portato all’introduzione di questa teoria, vengono presentate le tecniche di utilizzo comune per lo studio della dinamica omogenea (classica) inflazionaria e di quella disomogenea (quantistica). Una particolare attenzione viene rivolta ai metodi di approssimazione che è necessario adottare per estrarre predizioni analitiche dai modelli inflazionari per poi confrontarle con le osservazioni. Le tecniche introdotte vengono poi applicate ai modelli di inflazione con gravità indotta, ovvero ad una famiglia di modelli con accoppiamento non minimale tra il campo scalare inflatonico e il settore gravitazionale. Si porrà attenzione alle differenze rispetto ai modelli con accoppiamento minimale, e verrà studiata la dinamica in presenza di alcuni potenziali derivanti dalla teoria delle particelle e diffusi in letteratura. Il concetto di “transizione tra il frame di Jordan e il frame di Einstein” viene illustrato e le sue conseguenze nel calcolo approssimato del rapporto tensore su scalare sono discusse. Infine gli schemi di approssimazione proposti vengono analizzati numericamente. Risulterà che per due dei tre potenziali presentati i metodi di approssimazione sono più accurati nel frame di Einstein, mentre per il terzo potenziale i due frames portano a risultati analitici similmente accurati.

A finite-strain solid–shell using local Löwdin frames and least-squares strains

A finite-strain solid–shell element is proposed. It is based on least-squares in-plane assumed strains, assumed natural transverse shear and normal strains. The singular value decomposition (SVD) is used to define local (integration-point) orthogonal frames-of-reference solely from the Jacobian matrix. The complete finite-strain formulation is derived and tested. Assumed strains obtained from least-squares fitting are an alternative to the enhanced-assumed-strain (EAS) formulations and, in contrast with these, the result is an element satisfying the Patch test. There are no additional degrees-of-freedom, as it is the case with the enhanced-assumed-strain case, even by means of static condensation. Least-squares fitting produces invariant finite strain elements which are shear-locking free and amenable to be incorporated in large-scale codes. With that goal, we use automatically generated code produced by AceGen and Mathematica. All benchmarks show excellent results, similar to the best available shell and hybrid solid elements with significantly lower computational cost.

A finite-strain solid–shell using local Löwdin frames and least-squares strains

A finite-strain solid–shell element is proposed. It is based on least-squares in-plane assumed strains, assumed natural transverse shear and normal strains. The singular value decomposition (SVD) is used to define local (integration-point) orthogonal frames-of- reference solely from the Jacobian matrix. The complete finite-strain formulation is derived and tested. Assumed strains obtained from least-squares fitting are an alternative to the enhanced-assumed-strain (EAS) formulations and, in contrast with these, the result is an element satisfying the Patch test. There are no additional degrees-of-freedom, as it is the case with the enhanced- assumed-strain case, even by means of static condensation. Least-squares fitting produces invariant finite strain elements which are shear-locking free and amenable to be incorporated in large-scale codes. With that goal, we use automatically generated code produced by AceGen and Mathematica. All benchmarks show excellent results, similar to the best available shell and hybrid solid elements with significantly lower computational cost.

Il framing politico in Italia e in Germania: analisi e confronto di frames ricorrenti in ambito immigrazione

Questo elaborato ha come obiettivo quello di mettere a confronto alcuni dei frames ricorrenti nei dibattiti politici tedeschi e italiani, per poi analizzare in che modo essi riescano a influenzare il nostro pensiero. Data l’impossibilità di trattare il fenomeno del framing politico a tutto tondo, l’ambito da cui provengono i frames scelti per l’analisi è quello dell’immigrazione e dei fenomeni migratori. In un primo momento verrà fornita una breve introduzione su alcuni concetti fondamentali alla base del framing, come la simulazione cognitiva e gli stessi frames. Ogni parola, infatti, è inserita all’interno di una “cornice” di significato, che comprende altri concetti ad essa collegati. L’attivazione di quei concetti a livello mentale da un lato ne permette la comprensione, ma dall’altro è in grado di influenzare le nostre scelte e le nostre azioni. Il fatto che politici e media scelgano con molta attenzione le parole da usare per ottenere l’effetto desiderato sulla popolazione prende il nome di framing. Per quanto riguarda i termini ricorrenti in ambito immigrazione, sia in Italia che in Germania si fa largo uso di metafore legate a masse d’acqua e a catastrofi naturali, che hanno l’effetto di disumanizzare i migranti, i quali vengono inoltre percepiti come un pericolo. Alcuni esempi in italiano sono ondata di migranti e tsunami di migranti, che corrispondono ai tedeschi Flüchtlingsflut e Flüchtlings-Tsunami.

Laser Printer Attribution: Exploring New Features And Beyond.

With a huge amount of printed documents nowadays, identifying their source is useful for criminal investigations and also to authenticate digital copies of a document. In this paper, we propose novel techniques for laser printer attribution. Our solutions do not need very high resolution scanning of the investigated document and explore the multidirectional, multiscale and low-level gradient texture patterns yielded by printing devices. The main contributions of this work are: (1) the description of printed areas using multidirectional and multiscale co-occurring texture patterns; (2) description of texture on low-level gradient areas by a convolution texture gradient filter that emphasizes textures in specific transition areas and (3) the analysis of printer patterns in segments of interest, which we call frames, instead of whole documents or only printed letters. We show by experiments in a well documented dataset that the proposed methods outperform techniques described in the literature and present near-perfect classification accuracy being very promising for deployment in real-world forensic investigations.