Análise comparativa da produção e composição físico-química do leite considerando a utilização de diferentes volumosos na alimentação de vacas Girolando

Pós-graduação em Medicina Veterinária - FMVZ

Short periods of food restriction do not affect growth, survival or muscle development on pacu larvae

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fresamento de Eucalyptus grandis

The process of milling wood is widely used in operations such as planing and manufacturing frames . Machines like planers , desengrossadeiras , routers , moldureiras and machining centers employ the milling process for cutting wood . In this work the process of milling CNC machining center of Eucalyptus grandis was studied because this is very much used in furniture , but without consistent studies on this process . This work a CNC machining center brand TECH Z1 for analysis of surface quality ( Ra ) in relation to the variation of cutting speed and feed in concordant and discordant tangential milling and face milling was used . We used Eucalyptus grandis . Four forward speeds ( 3, 5 , 7, and 9 m / min ) for four shear rates ( 5,9; 8,4; 10,9 and 13,4 m/s ) were used. Was used for testing a cutter finishing top speed steel with helical teeth 16mm in diameter . 6 repetitions for each test condition were performed . From the results it was observed that the best results for roughness Vc = 10,9 m / s were obtained for the milling concordant with the forward speed Vf = 7 m / min. As for Vf = 5 m / min the best finish was achieved with Vc = 8,4 m /s in discordant for milling . The feedrate and cutting influenced the roughness . The senses of concordant and discordant and cut the top and the top had a significant difference in roughness

Análise de geradores piezelétricos acoplados com circuitos retificadores operando em regime caótico

Pós-graduação em Engenharia Mecânica - FEIS

Efeitos da dieta enriquecida com frutos das palmeiras Euterpe oleracea Mart. e Mauritia flexuosa L.f. na inflamação intestinal em ratos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de fitase por Rhizopus microsporus var. microsporus: purificação, caracterização bioquímica e aplicação

Pós-graduação em Biotecnologia - IQ

Efeito de treinamento de saltos verticais e do destreinamento sobre a expressão gênica de vias energéticas da musculatura esquelética de ratos Wistar induzidos à obesidade

Pós-graduação em Fisioterapia - FCT

Indicadores internos como alternativa ao óxido de crômio-III na determinação dos coeficientes de digestibilidade aparente pela Tilápia do Nilo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Capacidade digestiva durante a ontogenia de larvas de pacu Piaractus mesopotamicus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de técnicas e avaliações de antimicrobianos visando a produção de etanol carburante

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Investigation of the Transmission of Mycobacterium bovis from Deer to Cattle Through Indirect Contact

Objective—To investigate the infection of calves with Mycobacterium bovis through oral exposure and transmission of M bovis from experimentally infected white-tailed deer to uninfected cattle through indirect contact. Animals—24 11-month-old, white-tailed deer and 28 6-month-old, crossbred calves. Procedure—In the oral exposure experiment, doses of 4.3 X 106 CFUs (high dose) or 5 X 103 CFUs (low dose) of M bovis were each administered orally to 4 calves; as positive controls, 2 calves received M bovis (1.7 X 105 CFUs) via tonsillar instillation. Calves were euthanatized and examined 133 days after exposure. Deer-to-cattle transmission was assessed in 2 phases (involving 9 uninfected calves and 12 deer each); deer were inoculated with 4 X 105 CFUs (phase I) or 7 X 105 CFUs (phase II) of M Bovis. Calves and deer exchanged pens (phase I; 90 days’ duration) or calves received uneaten feed from deer pens (phase II; 140 days’ duration) daily. At completion, animals were euthanatized and tissues were collected for bacteriologic culture and histologic examination. Results—In the low- and high-dose groups, 3 of 4 calves and 1 of 4 calves developed tuberculosis, respectively. In phases I and II, 9 of 9 calves and 4 of 9 calves developed tuberculosis, respectively. Conclusions and Clinical Relevance—Results indicated that experimentally infected deer can transmit M bovis to cattle through sharing of feed. In areas where tuberculosis is endemic in free-ranging white-tailed deer, management practices to prevent access of wildlife to feed intended for livestock should be implemented.

Migración y ecología trófica de peces migradores verticales dominantes del Atlántico nordeste subtropical: implicaciones en el flujo activo de carbono

[EN]Diel vertical migrants (DVMs) are mainly zooplankton and micronekton that migrate upward from 400-700 m depth every night to feed in the productive epipelagic zone and come back at dawn to the mesopelagic zone, where they release the ingested carbon. DVMs should contribute to the biological pump in the ocean and, accordingly, to thevglobal CO2 balance. A large portion of the DVMs biomass are the lanternfishes (myctophidae), which might represent a pathway accounting for a substantial export of organic carbon to the deep ocean. Nevertheless, the magnitude of this transport is still poorly known. The combined study of migration and feeding ecology is a good approach to improve our knowledge of the DVMs role in this active carbon flux. Two dominant myctophids in the Subtropical Eastern North Atlantic Ocean (Hygophum hygomii (Lütken, 1892) and (Lobianchia dofleini (Zugmayer, 1911)) were studied from several surveys carried out around the Canary Islands during the last decade. Our results showed a marked diel vertical migration and a prevailing nocturnal feeding with predation mainly on copepods and euphausiids. The digestion state of prey suggested a slow stomach evacuation rate and that most of the ingested carbon in the epipelagic is efficiently transported to the mesopelagic zone.

THE POTENTIAL OF INDUSTRIAL WASTE AND AGRICULTURAL FEEDSTOCK TOWARDS SUSTAINABLE BIOFUELS PRODUCTION: TECHNO-ECONOMIC AND ENVIRONMENTAL IMPACT PERSPECTIVES

This Ph.D. research is comprised of three major components; (i) Characterization study to analyze the composition of defatted corn syrup (DCS) from a dry corn mill facility (ii) Hydrolysis experiments to optimize the production of fermentable sugars and amino acid platform using DCS and (iii) Sustainability analyses. Analyses of DCS included total solids, ash content, total protein, amino acids, inorganic elements, starch, total carbohydrates, lignin, organic acids, glycerol, and presence of functional groups. Total solids content was 37.4% (± 0.4%) by weight, and the mass balance closure was 101%. Total carbohydrates [27% (± 5%) wt.] comprised of starch (5.6%), soluble monomer carbohydrates (12%) and non-starch carbohydrates (10%). Hemicellulose components (structural and non-structural) were; xylan (6%), xylose (1%), mannan (1%), mannose (0.4%), arabinan (1%), arabinose (0.4%), galatactan (3%) and galactose (0.4%). Based on the measured physical and chemical components, bio-chemical conversion route and subsequent fermentation to value added products was identified as promising. DCS has potential to serve as an important fermentation feedstock for bio-based chemicals production. In the sugar hydrolysis experiments, reaction parameters such as acid concentration and retention time were analyzed to determine the optimal conditions to maximize monomer sugar yields while keeping the inhibitors at minimum. Total fermentable sugars produced can reach approximately 86% of theoretical yield when subjected to dilute acid pretreatment (DAP). DAP followed by subsequent enzymatic hydrolysis was most effective for 0 wt% acid hydrolysate samples and least efficient towards 1 and 2 wt% acid hydrolysate samples. The best hydrolysis scheme DCS from an industry's point of view is standalone 60 minutes dilute acid hydrolysis at 2 wt% acid concentration. The combined effect of hydrolysis reaction time, temperature and ratio of enzyme to substrate ratio to develop hydrolysis process that optimizes the production of amino acids in DCS were studied. Four key hydrolysis pathways were investigated for the production of amino acids using DCS. The first hydrolysis pathway is the amino acid analysis using DAP. The second pathway is DAP of DCS followed by protein hydrolysis using proteases [Trypsin, Pronase E (Streptomyces griseus) and Protex 6L]. The third hydrolysis pathway investigated a standalone experiment using proteases (Trypsin, Pronase E, Protex 6L, and Alcalase) on the DCS without any pretreatment. The final pathway investigated the use of Accellerase 1500® and Protex 6L to simultaneously produce fermentable sugars and amino acids over a 24 hour hydrolysis reaction time. The 3 key objectives of the techno-economic analysis component of this PhD research included; (i) Development of a process design for the production of both the sugar and amino acid platforms with DAP using DCS (ii) A preliminary cost analysis to estimate the initial capital cost and operating cost of this facility (iii) A greenhouse gas analysis to understand the environmental impact of this facility. Using Aspen Plus®, a conceptual process design has been constructed. Finally, both Aspen Plus Economic Analyzer® and Simapro® sofware were employed to conduct the cost analysis as well as the carbon footprint emissions of this process facility respectively. Another section of my PhD research work focused on the life cycle assessment (LCA) of commonly used dairy feeds in the U.S. Greenhouse gas (GHG) emissions analysis was conducted for cultivation, harvesting, and production of common dairy feeds used for the production of dairy milk in the U.S. The goal was to determine the carbon footprint [grams CO2 equivalents (gCO2e)/kg of dry feed] in the U.S. on a regional basis, identify key inputs, and make recommendations for emissions reduction. The final section of my Ph.D. research work was an LCA of a single dairy feed mill located in Michigan, USA. The primary goal was to conduct a preliminary assessment of dairy feed mill operations and ultimately determine the GHG emissions for 1 kilogram of milled dairy feed.

Alternative Cow Herd Investment Strategies: Constant Size and Constant Investment

Two heifer replacement strategies were compared over a 25-year period. One strategy retained the same number of heifers each year to maintain a constant herd size. The second strategy retained the same dollar value of heifer calves each year based on their opportunity cost as feeder calves. The constant investment strategy herd size varied throughout the period, but generated higher average profit and higher net worth than did the constant herd size strategy. Constant investment is a simple strategy to adjust the level of investment in beef cows and the resource base (pasture, labor, winter feed) in response to market signals driven by the cattle cycle. This strategy automatically increases heifer retention when the opportunity cost is low and reduces the number retained when cost is high. The effect is a lower average cost of cows in the herd, lower overall investment, and a higher net return on investment. Iowa producers, who often have greater flexibility in land use than producers in other major beef cow regions, can better utilize this strategy that generates greater profits and net worth growth.

(Table 1) Reproductive performance of brown skua pairs with and without feeding territories at Potter Peninsula/King George Island from 1998/1999 to 2000/2001

In the maritime Antarctic, brown skuas (Catharacta antarctica lonnbergi) show two foraging strategies: some pairs occupy feeding territories in penguin colonies, while others can only feed in unoccupied areas of a penguin colony without defending a feeding territory. One-third of the studied breeding skua population in the South Shetlands occupied territories of varying size (48 to >3,000 penguin nests) and monopolised 93% of all penguin nests in sub-colonies. Skuas without feeding territories foraged in only 7% of penguin sub-colonies and in part of the main colony. Females owning feeding territories were larger in body size than females without feeding territories; no differences in size were found in males. Territory holders permanently controlled their resources but defence power diminished towards the end of the reproductive season. Territory ownership guaranteed sufficient food supply and led to a 5.5 days earlier egg-laying and chick-hatching. Short distances between nest and foraging site allowed territorial pairs a higher nest-attendance rate such that their chicks survived better (71%) than chicks from skua pairs without feeding territories (45%). Due to lower hatching success in territorial pairs, no difference in breeding success of pairs with and without feeding territories was found in 3 years. We conclude that skuas owning feeding territories in penguin colonies benefit from the predictable and stable food resource by an earlier termination of the annual breeding cycle and higher offspring survivorship.