927 resultados para duration, functional delta method, gamma kernel, hazard rate.


Relevância:

100.00% 100.00%

Publicador:

Resumo:

A set of coupled-channel differential equations based on a rotationally distorted optical potential is used to calculate the wave functions required to evaluate the gamma ray transition rate from the first excited state to the ground state in ^(13)C and ^(13)N. The bremsstrahlung differential cross section of low energy protons is also calculated and compared with existing data. The marked similarity between the potentials determined at each resonance level in both nuclei supports the hypothesis of the charge symmetry of nuclear forces by explaining the deviation of the ratios of the experimental E1 transition strengths from unity.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study concerns the longitudinal dispersion of fluid particles which are initially distributed uninformly over one cross section of a uniform, steady, turbulent open channel flow. The primary focus is on developing a method to predict the rate of dispersion in a natural stream.

Taylor's method of determining a dispersion coefficient, previously applied to flow in pipes and two-dimensional open channels, is extended to a class of three-dimensional flows which have large width-to-depth ratios, and in which the velocity varies continuously with lateral cross-sectional position. Most natural streams are included. The dispersion coefficient for a natural stream may be predicted from measurements of the channel cross-sectional geometry, the cross-sectional distribution of velocity, and the overall channel shear velocity. Tracer experiments are not required.

Large values of the dimensionless dispersion coefficient D/rU* are explained by lateral variations in downstream velocity. In effect, the characteristic length of the cross section is shown to be proportional to the width, rather than the hydraulic radius. The dimensionless dispersion coefficient depends approximately on the square of the width to depth ratio.

A numerical program is given which is capable of generating the entire dispersion pattern downstream from an instantaneous point or plane source of pollutant. The program is verified by the theory for two-dimensional flow, and gives results in good agreement with laboratory and field experiments.

Both laboratory and field experiments are described. Twenty-one laboratory experiments were conducted: thirteen in two-dimensional flows, over both smooth and roughened bottoms; and eight in three-dimensional flows, formed by adding extreme side roughness to produce lateral velocity variations. Four field experiments were conducted in the Green-Duwamish River, Washington.

Both laboratory and flume experiments prove that in three-dimensional flow the dominant mechanism for dispersion is lateral velocity variation. For instance, in one laboratory experiment the dimensionless dispersion coefficient D/rU* (where r is the hydraulic radius and U* the shear velocity) was increased by a factory of ten by roughening the channel banks. In three-dimensional laboratory flow, D/rU* varied from 190 to 640, a typical range for natural streams. For each experiment, the measured dispersion coefficient agreed with that predicted by the extension of Taylor's analysis within a maximum error of 15%. For the Green-Duwamish River, the average experimentally measured dispersion coefficient was within 5% of the prediction.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A presença de ventilação periódica durante o exercício confere pior prognóstico a pacientes com insuficiência cardíaca. Existem divergências quanto aos critérios para identificação deste fenômeno. Além disso, a interpretação dicotômica (presença ou ausência) quanto a este fenômeno dificulta a estratificação de risco mais detalhada dos pacientes com insuficiência cardíaca. Desta forma, esta tese avalia a utilização de técnicas estabelecidas para análise de variabilidade de sinais para quantificar as oscilações ventilatórias que ocorrem durante o teste cardiopulmonar de exercício, em indivíduos saudáveis, atletas e com insuficiência cardíaca. Um protocolo mais curto para realização de teste cardiopulmonar de exercício em cicloergômetro de braço foi proposto e validado. Tal protocolo foi utilizado em estudo posterior, onde se comprovou que, apesar dos tempos respiratórios não serem influenciados pelo tipo de exercício realizado, a variabilidade ventilatória é maior durante a realização de exercício dinâmico com membros superiores do que com membros inferiores. A capacidade aeróbica de indivíduos sadios também influencia a variabilidade ventilatória durante o teste cardiopulmonar de exercício. Isto foi comprovado pela menor variabilidade ventilatória no domínio do tempo em atletas do que sedentários durante exercício. A análise destes voluntários com o método da análise dos componentes principais revelou que em atletas a variabilidade do volume corrente é a principal responsável pela variabilidade da ventilação-minuto durante o exercício, ao passo que em sedentários a variabilidade da freqüência respiratória apresenta-se como principal responsável por tais variações. Em estudo randomizado e controlado comprovamos que, mesmo indivíduos sadios apresentam redução da variabilidade ventilatória ao exercício após 12 semanas de treinamento físico. Comprovamos que a reabilitação cardíaca reverteu a ocorrência de ventilação periódica em um paciente com insuficiência cardíaca e, finalmente, encontramos que a variabilidade ventilatória correlaciona-se inversamente com a fração de ejeção ventricular esquerda em pacientes com insuficiência cardíaca. Estudos futuros deverão analisar o poder prognóstico da variabilidade ventilatória nestes pacientes.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Receptores ativadores de proliferação perixossomal(PPARs) são fatores de transcrição envolvidos com a oxidação dos ácidos graxos e proliferação celular, mediando diversas vias, o que representa uma estratégia promissora para enfrentar as características da síndrome metabólica. Existem três isoformas de PPARs(PPARalfa, beta/delta e gama), que são diferencialmente expressos em diferentes tecidos.No presente estudo, objetivou-se avaliar os efeitos pleiotrópicos da telmisartana, um anti-hipertensivo, bloqueador do receptor AT1 da angiotensina e agonista parcial PPAR gama, no tecido adiposo branco (TAB) e marrom (TAM) em camundongos obesos induzido por dieta.Camundongos machos, da linhagem C57BL/6 foram alimentados com uma dieta padrão (standard-chow, 10% da energia proveniente de lipídios) ou com uma dieta com alto teor lipídico (high fat, 49% de energia proveniente de lipídios) durante 10 semanas. Em seguida, os animais foram distribuídos aleatoriamente em quatro grupos: SC, SC-T, HF e HF-T (n=10). O fármaco foi administrado (10mg/kg de dieta) durante 4 semanas para os grupos SC-T e HF-T.O grupo HF apresentou sobrepeso, hipertensão arterial sistêmica, perfil de adipocinas pró-inflamatórias, resistência insulínica, diminuição do gasto energético, comprometimento do metabolismo da glicose e distribuição anormal da massa adiposa. Além disso, a obesidade ocasionou diminuição da expressão de PPARalfa, beta/delta e gama noTAB e TAM, resultando na inadequação da captação de glicose e termogênese insuficiente. Por outro lado,a ativação das três isoformas de PPARs, a melhora do perfil inflamatório das adipocinas, o aumento da sensibilidade à insulina e a melhora da captação de glicose, foi vistaapós o tratamento com telmisartana. A ativação dos PPARs no TAB trouxe muitos benefícios. No TAM, resultados surpreendentes foram que a telmisartana provocou o aumento da expressão do recepetor adrenérgico beta 3 (RAβ3), induzido pela ativação de PPARbeta/delta e maior termogênese comaumento da expressão da proteína desacopladora1 (UCP1). Em conclusão, nossos resultados mostram que telmisartanaaumenta a expressão gênica e proteica PAN-PPAR no TAB e TAM em camundongos obesos induzidos por dieta. Nossas observações mostram que, apesar do grupo HF-T ter reduzido a ingestão energética, os efeitossão explicados pela ativação PAN-PPAR da telmisartana, causando a ativação da termogênese e resultando num balanço energético negativo.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

High Curie temperature of 900 K has been reported in Cr-doped AlN diluted magnetic semiconductors prepared by various methods, which is exciting for spintronic applications. It is believed that N defects play important roles in achieving the high-temperature ferromagnetism in good samples. Motivated by these experimental advances, we use a full-potential density-functional-theory method and supercell approach to investigate N defects and their effects on ferromagnetism of (Al,Cr)N with N vacancies (V-N). We investigate the structural and electronic properties of V-N, single Cr atom, Cr-Cr atom pairs, Cr-V-N pairs, and so on. In each case, the most stable structure is obtained by comparing different atomic configurations optimized in terms of the total energy and the force on every atom, and then it is used to calculate the defect formation energy and study the electronic structures. Our total-energy calculations show that the nearest substitutional Cr-Cr pair with the two spins in parallel is the most favorable and the nearest Cr-V-N pair makes a stable complex. Our formation energies indicate that V-N regions can be formed spontaneously under N-poor condition because the minimal V-N formation energy equals -0.23 eV or Cr-doped regions with high enough concentrations can be formed under N-rich condition because the Cr formation energy equals 0.04 eV, and hence real Cr-doped AlN samples are formed by forming some Cr-doped regions and separated V-N regions and through subsequent atomic relaxation during annealing. Both of the single Cr atom and the N vacancy create filled electronic states in the semiconductor gap of AlN. N vacancies enhance the ferromagnetism by adding mu(B) to the Cr moment each but reduce the ferromagnetic exchange constants between the spins in the nearest Cr-Cr pairs. These calculated results are in agreement with experimental observations and facts of real Cr-doped AlN samples and their synthesis. Our first-principles results are useful to elucidate the mechanism for the ferromagnetism and to explore high-performance Cr-doped AlN diluted magnetic semiconductors.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

We have demonstrated a passively Q-switched and mode-locked Nd:YVO4 laser with an intracavity composite semiconductor saturable absorber (ICSSA). Stable Q-switched and mode-locked pulses with Q-switched envelope pulse duration of 180 ns and pulse repetition rate of 72KHz have been obtained. The maximum average output power was 1.45W at 8W incident pump power. The repetition rate of the mode-locked pulses inside the Q-switched envelope was 154 MHz. Experimental results revealed that this ICSSA was suitable for Q-switched and mode-locked solid-state lasers. (c) 2007 Elsevier Ltd. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

ZnO, as a wide-band gap semiconductor, has recently become a new research focus in the field of ultraviolet optoelectronic semiconductors. Laser molecular beam epitaxy (L-MBE) is quite useful for the unit cell layer-by-layer epitaxial growth of zinc oxide thin films from the sintered ceramic target. The ZnO ceramic target with high purity was ablated by KrF laser pulses in an ultra high vacuum to deposit ZnO thin film during the process of L-MBE. It is found that the deposition rate of ZnO thin film by L-MBE is much lower than that by conventional pulsed laser deposition (PLD). Based on the experimental phenomena in the ZnO thin film growth process and the thermal-controlling mechanism of the nanosecond (ns) pulsed laser ablation of ZnO ceramic target, the suggested effective ablating time during the pulse duration can explain the very low deposition rate of the ZnO film by L-MBE. The unique dynamic mechanism for growing ZnO thin film is analyzed. Both the high energy of the deposition species and the low growth rate of the film are really beneficial for the L-MBE growth of the ZnO thin film with high crystallinity at low temperature.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

网络应用程序中为了保持程序的交互性,服务器端的控制程序如CGI(command gateway interface)程序需要在不同的脚本程序之问切换,这样不可避免的会造成控制信息的丢失.为了避免这些问题,介绍了将函数式程序设计语言的一些方法,如Continuation、CPS(eontinuationpassing style)等,并将它们应用到网络程序设计中,不仅简化了设计过程,也提高了程序的安全性,并可以在更一般的语言中实现.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

细沟剥蚀土粒随着细沟股流中含沙量的增加而减少 ,这一概念已在一些侵蚀模型 (如 WEPP)中得到应用。用黄土高原一种典型的粉壤土 ,在 5种坡度 (5°,10°,15°,2 0°,2 5°) ,3种流量 (2 ,4,8L/m in)条件下进行了细沟侵蚀模拟试验 ,试验沟长 0 .5~ 8m。通过 40 5次试验 ,确定了不同坡度、入流量条件下 ,侵蚀产沙量与细沟长度的定量函数关系。在假定细沟径流和土壤侵蚀沿细沟的行为相同条件下 ,提出了一种计算含沙水剥蚀率的方法 ,并进一步表达了细沟剥蚀率随含沙量以及沟长变化的函数关系。实验结果在 15°,2 0°,2 5°时表现出很好的显著性

Relevância:

100.00% 100.00%

Publicador:

Resumo:

With the digital all-sky imager (ASI) emergence in aurora research, millions of images are captured annually. However, only a fraction of which can be actually used. To address the problem incurred by low efficient manual processing, an integrated image analysis and retrieval system is developed. For precisely representing aurora image, macroscopic and microscopic features are combined to describe aurora texture. To reduce the feature dimensionality of the huge dataset, a modified local binary pattern (LBP) called ALBP is proposed to depict the microscopic texture, and scale-invariant Gabor and orientation-invariant Gabor are employed to extract the macroscopic texture. A physical property of aurora is inducted as region features to bridge the gap between the low-level visual features and high-level semantic description. The experiments results demonstrate that the ALBP method achieves high classification rate and low computational complexity. The retrieval simulation results show that the developed retrieval system is efficient for huge dataset. (c) 2010 Elsevier Inc. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The electronic, magnetic, and mechanical properties of CaCu3V4O12 are investigated by use of the density functional theory method. The calculated results indicate that CaCu3V4O12 is a half-metallic and ferrimagnetic compound. The magnetic coupling for Cu-V is antiferromagnetic, while those for Cu-Cu and V-V are ferromagnetic. The obtained elastic constants suggest that the compound is mechanically stable. The calculated oxidation states and density of states reveal the existence of a mixed valence for Cu and V. This supports the experimental observation of the mixed valence in Ca2+Cu2+Cu2+(V25+V24+)O-12.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The phase transition of two kinds of solvent-induced crystalline syndiotactic polystyrene (sPS). gamma-sPS and delta(c)-sPS, has been studied via WAXD and DSC. gamma-sPS transform to a-sPS at 195-225 degrees C before melt during heating, whereas delta(e)-sPS transform to first gamma-sPS and then a-sPS at 100-200 degrees C and 200-215 degrees C, respectively. The transition of delta(e)-gamma and gamma-a occurs for below melting point of sPS indicates they are all solid-solid transition.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Nine novel triazole compounds containing ester group were designed and synthesized. Their structures were confirmed by elemental, H-1 NMR and IR analyses, and optimized by means of DFT (Density Functional Theory) method at the B3LYP/6-31G* level. Based on the quantum-chemical calculation results and the Pearson coefficients between FA and quantumchemical parameters, V, LogP, MR and E-HOMO are shown to be the important relative factors which affect FA of the title compounds.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

To evaluate the interactions between the atoms of An, Ag and Cu and clean Si(111) surface, two types of silicon clusters Si4H7 and Si16H20 together with their metal complexes were studied by using hybrid (U)B3LYP density functional theory method. Optimized geometries and energies on different adsorption sites indicate that: (1) the binding energies at different adsorption sites are large (ranging from similar to 1.2 to 2.6 eV depend on the metal atoms and adsorption sites), suggesting a strong interaction between metal atom and silicon surface; (2) the most favorable adsorption site is the on top (T) site. Mulliken population analysis indicated that in the system of on top (T) site, a covalent bond is formed between metal atom and dangling bond of surface Si atom. (c) 2006 Elsevier B.V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

As one part of national road No. 318, Sichuan-Tibet (Chengdu-Lasha) Highway is one of traffic life lines connecting Tibet municipality to the inland, which is very important to the economic development of Tibet. In addition, it is still an important national defence routeway, with extremely important strategic position on maintaining the stability and solidarity of Tibet municipality and consolidating national defence. Particular geological condition, terrain and landform condition and hydrometeorological condition induce large-scale debris flows and landslides (including landslips) and the like geological hazards frequently occur along the highway. High frequency geological hazards not only result in high casualties and a great property loss, but also block traffic at every turn, obstructing the Sichuan-Tibet highway seriously. On the basis of considerable engineering geological investigation and analysis to the relative studying achievements of predecessors, it is found that one of the dominating reason incurring landslides or debris flows again and again in a place is that abundant loose materials are accumulated in valleys and slopes along the highway. Taking landslides' and debris flows along Ranwu-Lulang section of Sichuan-Tibet highway as studying objects, the sources and cause of formation of loose accumulation materials in the studying area are analyzed in detail, the major hazard-inducing conditions, hazard, dynamic risk, prediction of susceptibility degree of landslides and debris flows, and the relations between landslides and debris flows and various hazard-inducing conditions are systematically researched in this paper. All of these will provide scientific foundation for the future highway renovating and reducing and preventing geological hazards. For the purpose of quantitatively analyzing landslide and debris flow hazards, the conception of entropy and information entropy are extended, the conception of geological hazard entropy is brought forward, and relevant mathematics model is built. Additionally, a new approach for the dynamic risk analysis of landslide and debris flow is put forward based on the dynamic characteristics of the hazard of hazard-inducings and the vulnerability of hazard-bearings. The formation of landslide and debris flow is a non-linear process, which is synthetically affected by various factors, and whose formation mechanics is extremely complex. Aiming at this question, a muli-factors classifying and overlapping technique is brought forward on the basis of engineering geomechanics meta-synthesis (EGMS) thought and approach, and relevant mathematics model is also built to predict the susceptibility degree of landslide or debris flow. The example analysis result proves the validity of this thought and approach. To studying the problem that whether the formation and space distribution of landslides and debris flows are controlled by one or several hazard-inducing conditions, the theme graphics of landslides and debris flows hazard and various hazard-inducing conditions are overlapped to determine the relationship between hazard and hazard-inducing conditions. On this basis, the semi-quantitative engineering zonation of the studying area is carried out. In addition, the overlapping analysis method of the hazard-indue ing conditions of landslides and debris flows based on "digital graphics system" is advanced to orderly organize and effectively manage the spatial and attributive data of hazard and hazard-inducing conditions theme graphics, and to realize the effectively combination of graphics, images and figures.