Outcome of smoking cessation counselling of HIV-positive persons by HIV care physicians.

OBJECTIVES: Smoking is the most prevalent modifiable risk factor for cardiovascular diseases among HIV-positive persons. We assessed the effect on smoking cessation of training HIV care physicians in counselling. METHODS: The Swiss HIV Cohort Study (SHCS) is a multicentre prospective observational database. Our single-centre intervention at the Zurich centre included a half day of standardized training for physicians in counselling and in the pharmacotherapy of smokers, and a physicians' checklist for semi-annual documentation of their counselling. Smoking status was then compared between participants at the Zurich centre and other institutions. We used marginal logistic regression models with exchangeable correlation structure and robust standard errors to estimate the odds of smoking cessation and relapse. RESULTS: Between April 2000 and December 2010, 11 056 SHCS participants had 121 238 semi-annual visits and 64 118 person-years of follow-up. The prevalence of smoking decreased from 60 to 43%. During the intervention at the Zurich centre from November 2007 to December 2009, 1689 participants in this centre had 6068 cohort visits. These participants were more likely to stop smoking [odds ratio (OR) 1.23; 95% confidence interval (CI) 1.07-1.42; P=0.004] and had fewer relapses (OR 0.75; 95% CI 0.61-0.92; P=0.007) than participants at other SHCS institutions. The effect of the intervention was stronger than the calendar time effect (OR 1.19 vs. 1.04 per year, respectively). Middle-aged participants, injecting drug users, and participants with psychiatric problems or with higher alcohol consumption were less likely to stop smoking, whereas persons with a prior cardiovascular event were more likely to stop smoking. CONCLUSIONS: An institution-wide training programme for HIV care physicians in smoking cessation counselling led to increased smoking cessation and fewer relapses.

Alcohol and cannabis use as risk factors for injury--a case-crossover analysis in a Swiss hospital emergency department.

BACKGROUND: There is sufficient and consistent evidence that alcohol use is a causal risk factor for injury. For cannabis use, however, there is conflicting evidence; a detrimental dose-response effect of cannabis use on psychomotor and other relevant skills has been found in experimental laboratory studies, while a protective effect of cannabis use has also been found in epidemiological studies. METHODS: Implementation of a case-crossover design study, with a representative sample of injured patients (N = 486; 332 men; 154 women) from the Emergency Department (ED) of the Lausanne University Hospital, which received treatment for different categories of injuries of varying aetiology. RESULTS: Alcohol use in the six hours prior to injury was associated with a relative risk of 3.00 (C.I.: 1.78, 5.04) compared with no alcohol use, a dose-response relationship also was found. Cannabis use was inversely related to risk of injury (RR: 0.33; C.I.: 0.12, 0.92), also in a dose-response like manner. However, the sample size for people who had used cannabis was small. Simultaneous use of alcohol and cannabis did not show significantly elevated risk. CONCLUSION: The most surprising result of our study was the inverse relationship between cannabis use and injury. Possible explanations and underlying mechanisms, such as use in safer environments or more compensatory behavior among cannabis users, were discussed.

A bovine model of a respiratory Parachlamydia acanthamoebae infection.

The aim of this study was to evaluate the pathogenicity of Parachlamydia (P.) acanthamoebae as a potential agent of lower respiratory tract disease in a bovine model of induced lung infection. Intrabronchial inoculation with P. acanthamoebae was performed in healthy calves aged 2-3 months using two challenge doses: 10(8) and 10(10) bacteria per animal. Controls received 10(8) heat-inactivated bacteria. Challenge with 10(8) viable Parachlamydia resulted in a mild degree of general indisposition, whereas 10(10) bacteria induced a more severe respiratory illness becoming apparent 1-2 days post inoculation (dpi), affecting 9/9 (100%) animals and lasting for 6 days. The extent of macroscopic pulmonary lesions was as high as 6.6 (6.0)% [median (range)] of lung tissue at 2-4 dpi and correlated with parachlamydial genomic copy numbers detected by PCR, and with bacterial load estimated by immunohistochemistry in lung tissue. Clinical outcome, acute phase reactants, pathological findings and bacterial load exhibited an initial dose-dependent effect on severity. Animals fully recovered from clinical signs of respiratory disease within 5 days. The bovine lung was shown to be moderately susceptible to P. acanthamoebae, exhibiting a transient pneumonic inflammation after intrabronchial challenge. Further studies are warranted to determine the precise pathophysiologic pathways of host-pathogen interaction.

Elastomeerien kesto viherlipeäkäsittelyissä

Työssä on tutkittu eri kumilaatujen soveltuvuutta viherlipeäympäristöön laboratoriomittausten avulla. Kumia tultaisiin käyttämään viherlipeälinjan letkuventtiilissä. Suomalaisista sellutehtaista saaduista viherlipeänäytteistä mitattiin alkali- ja vierasainepitoisuudet. Kumitestauksissa viherlipeässä pyrittiin selvittämään kumien kesto prosessiolosuhteita vastaavissa olosuhteissa. Kumit asetettiin kuumaan viherlipeään jännitettynä ja pidettiin siinä kolme vuorokautta. Kumista tutkittavia ominaisuuksia olivat kumin massan muutos, kovuus, vetolujuus sekä murtovenymä. Kolmen vuorokauden testien tulosten perusteella valittiin kolme kumilaatua tuhannen tunnin kestotestiin, joissa seurattiin kumin massan käyttäytymistä sekä kumin pitkäaikaisen altistamisen viherlipeässä vaikutusta lujuusominaisuuksiin. Kokeissa havaittiin osan testatuista kumeista sitovan viherlipeää itseensä, mikä aiheuttaisi viherlipeän pääsyn letkun vahvikkeisiin ja aiheuttaisi letkun hajoamisen. Osa kumeista kului kemiallisesti, mikä taas aiheuttaisi letkun rasitustilanteissa repeämiä letkun pinnassa ja lopulta letkun hajoamisen. Kuitenkin suuressa osassa testatuissa kumimateriaaleissa ei ollut suuria massanmuutoksia. Tällöin lujuusmittaukset kertoivat muilta osin kumin kestosta. Muutamilla kumeilla massanmuutokset olivat alhaisia, mutta lujuusarvot olivat romahtaneet. Kuitenkin laboratoriomittausten tulosten perusteella pystyttiin löytämään kumimateriaali, joka kestäisi paremmin viherlipeäprosessissa kuin teollisuudessa käytössä ollut kumimateriaali. Kuitenkin lopullinen varmuus tästä voidaan saada teollisuudessa tehtyjen testausten avulla.

First-mover Advantage

Tämän tutkielman tarkoitus oli tutkia yrityksen markkinoille tai alalle tulon ajoitukseen pohjautuvaa kilpailuetua –erityisesti niin kutsuttua ensimmäisen toimijan etua - eli etua jonka yritys voi saavuttaa tullessaan markkinoille tiettyyn aikaan suhteessa muihin markkinoille tulijoihin. Tutkielma on luonteeltaan kirjallisuuskatsaus. Yleisesti ottaen ei voida sanoa että jokin tietty markkinoille tai alalle tulo strategia –esimerkiksi ensimmäisenä toimiminen – olisi yritykselle aina kannattavaa. On oletettavaa että yrityksen toimintaympäristö, erityisesti toimiala jolla se toimii, määrittää kyseenomaiseen kilpailuetuun liittyvät mahdollisuudet, ja että yrityksen omista lähtökohdista ja toiminnasta riippuu kuinka hyvin se pystyy nämä mahdollisuudet hyödyntämään. Työssä on esitetty ehdotuksia ensimmäisen toimijan edun jatkotutkimusta varten.

Oncobiguanides: Paracelsus" law and nonconventional routes for administering diabetobiguanides for cancer treatment

The dose makes the poison, the common motto of toxicology first expressed by Paracelsus more than 400 years ago, may effectively serve to guide potential applications for metformin and related biguanides in oncology. While Paracelsus' law for the dose-response effect has been commonly exploited for the use of some anti-cancer drugs at lower doses in non-neoplastic diseases (e.g., methotrexate), the opposite scenario also holds true; in other words, higher doses of non-oncology drugs, such as anti-diabetic biguanides, might exert direct anti-neoplastic effects. Here, we propose that, as for any drug, there is a dose range for biguanides that is without any effect, one corresponding to"diabetobiguanides" with a pharmacological effect (e.g., insulin sensitization in type 2 diabetes, prevention of insulin-dependent carcinogenesis, indirect inhibition of insulin and growth factor-dependent cancer growth) but with minimal toxicity and another corresponding to 'oncobiguanides' with pharmacological (i.e., direct and strong anticancer activity against cancer cells) as well as toxic effects. Considering that biguanides demonstrate a better safety profile than most oncology drugs in current use, we should contemplate the possibility of administering biguanides through non-conventional routes (e.g., inhaled for carcinomas of the lung, topical for skin cancers, intravenous as an adjunctive therapy, rectal suppositories for rectal cancer) to unambiguously investigate the therapeutic value of high-dose transient biguanide exposure in cancer. Perhaps then, the oncobiguanides, as we call them here, could be viewed as a mechanistically different type of anti-cancer drugs employed at doses notably higher than those used chronically when functioning as diabetobiguanides

Effects of low-level laser therapy on wound healing

OBJECTIVE: To gather and clarify the actual effects of low-level laser therapy on wound healing and its most effective ways of application in human and veterinary medicine.METHODS: We searched original articles published in journals between the years 2000 and 2011, in Spanish, English, French and Portuguese languages, belonging to the following databases: Lilacs, Medline, PubMed and Bireme; Tey should contain the methodological description of the experimental design and parameters used.RESULTS: doses ranging from 3 to 6 J/cm2 appear to be more effective and doses 10 above J/cm2 are associated with deleterious effects. The wavelengths ranging from 632.8 to 1000 nm remain as those that provide more satisfactory results in the wound healing process.CONCLUSION: Low-level laser can be safely applied to accelerate the resolution of cutaneous wounds, although this fact is closely related to the election of parameters such as dose, time of exposure and wavelength.

The exercise leader's gender and physique salience : effects on self-presentational concerns in an exercise context

Self-presentation is the process by which individuals attempt to monitor and control how others perceive and evaluate them (Leary, 1992; Leary & Kowalski, 1990). Self-presentational concerns have been shown to influence a number of exercise-related behaviours, cognitions, and affective responses to exercise (e.g., social anxiety). Social anxiety occurs when an individual wants to create a specific impression on others, but is unsure (s)he will be successful (Leary & Kowalski, 1995). Social physique anxiety (SPA) is a specific form of social anxiety related the evaluation of one's body (Hart, Leary, & Rejeski, 1989). Both social anxiety and SPA may act as deterrents to exercise (Lantz, Hardy, & Ainsworth, 1997; Leary, 1992), so it is important to examine factors that may influence social anxiety and SPA; one such factor is self-presentational efficacy (SPE). SPE is one's confidence in successfully making desired impressions on others (Leary & Atherton, 1986) and has been associated with social anxiety and SPA (Leary & Kowalski, 1995; Gammage, Martin Ginis, & Hall, 2004). Several aspects of the exercise environment, such as the presence of mirrors, clothing, and the exercise leader or other participant characteristics, may be manipulated to influence self-presentational concerns (e.g., Gammage, Martin Ginis et aI., 2004; Martin & Fox, 2001; Martin Ginis, Prapavessis, & Haase, 2005). Given that the exercise leader has been recognized as one of the most important influences in the group exercise context (Franklin, 1988), it is important to further examine how the leader may impact self-presentational concerns. The present study examined the impact of the exercise leader's gender and physique salience (i.e., the extent to which the body was emphasized) on SPE, state social anxiety (SSA), and state social physique anxiety (SPA-S) of women in a live exercise class. Eighty-seven college-aged female non- or infrequent exercisers (i.e., exercised 2 or fewer times per week) participated in a group exercise class led by one of four leaders: a female whose physique was salient; a female whose physique was non-salient; a male whose physique was salient; or a male whose physique was non-salient. Participants completed measures of SPE, SSA, and SPA-S prior to and following completion of a 30- minute group exercise class. In addition, a measure of social comparison to the exercise leader and other participants with respect to attractiveness, skill, and fitness was completed by participants following the exercise class. A MANOV A was conducted to examine differences between groups on postexercise variables. Results indicated that there were no significant differences between groups on measures ofSPE, SSA, or SPA-S (allp's > .05). However, when all participants were collapsed into one group, a MANOV A showed a significant time effect (F(3, 81) = 19.45,p < .05, 1')2= .419). Follow-up ANOVAs indicated that post-exercise SPE increased significantly, while SSA and SPA-S decreased significantly (SPE: F(I, 83) = 30.87,p < .001,1')2 = .27; SSA: F(I,83) = 11.09,p < .001, 1')2 = .12; SPA-S: F (1,83) = 42.79,p < .001, 1')2 = .34). Further, results of a MANOVA revealed that participants who believed they were less fit than other group members (i.e., made negative social comparisons) reported significantly more post-exercise SSA and SP A-S than those who believed they were more fit than the other participants (i.e., made positive comparisons; SSA: F(2, 84) = 3.46, p < .05, 1')2 = .08; SPA-S: F(2, 84) = 5.69, p < .05, 1')2 = .12). These results may indicate that successfully completing an exercise class may serve as a source of SPE and lead to reduced social anxiety and SPA-S in this population. Alternatively, characteristics of the exercise leader may be less important than characteristics of the other participants. These results also suggest that the types of social comparisons made may influence self-presentational concerns in this sample. Future research should examine how the type of social comparison (i.e., negative or positive) made to the other group members may either generate or reduce anxiety. Also, factors that contribute to the types of social comparisons made with other exercisers should be examined. Implications for practice and research are discussed.

The effects of an acute bout of whole-body vibration on pulse wave velocity in individuals with SCI

Cardiovascular disease is a leading cause of mortality in the spinal cord injured (SCI) population. Reduced arterial compliance is a cardiovascular risk factor and whole body vibration (WBV) has be en shown to improve arterial compliance in able-bodied individuals. The study investigated the effect of an acute session ofWBV on arterial compliance as measured by pulse wave velocity (PWV). On separate days, arm, leg and aortic PWV were measured pre- and post- a 45 minute session of passive stance (PS) and WBV. The WBV was intermittent with a set frequency of 45Hz and amplitude of O.6mm. There was no condition by time effect when comparing PWV after WBV and PS. Following WBV, aortic (928.6±127.7 vs. 901.1±96.6cm/sec), leg (1035.2±113.8 vs.l099.8±114.2cm/sec) and arm PWV (1118.9±119.8 vs. 1181.1±124.4cm/s) did not change. As such, WBV did not reduce arterial compliance, however future research with protocol modifications is recommended.

The effects of manipulated augmented sensory feedback on error detection when using a touch screen

The purpose of the present study was to determine which augmented sensory modality would best develop subjective error-detection capabilities of learners performing a spatial-temporal task when using a touch screen monitor. Participants were required to learn a 5-digit key-pressing task in a goal time of 2550 ms over 100 acquisition trials on a touch screen. Participants were randomized into 1 of 4 groups: 1) visual-feedback (colour change of button when selected), 2) auditory-feedback (click sound when button was selected), 3) visual-auditory feedback (both colour change and click sound when button was selected), and 4) no-feedback (no colour change or click sound when button was selected). Following each trial, participants were required to provide a subjective estimate regarding their performance time in relation to the actual time it took for them complete the 5-digit sequence. A no-KR retention test was conducted approximately 24-hours after the last completed acquisition trial. Results showed that practicing a timing task on a touch screen augmented with both visual and auditory information may have differentially impacted motor skill acquisition such that removal of one or both sources of augmented feedback did not result in a severe detriment to timing performance or error detection capabilities of the learner. The present study reflects the importance of multimodal augmented feedback conditions to maximize cognitive abilities for developing a stronger motor memory for subjective error-detection and correction capabilities.

Implication de la voie ERK3/4-MK5 dans la phase G2/M du cycle cellulaire

La division cellulaire est influencée par les différents stimuli provenant de l’extérieur ou de l’intérieur de la cellule. Plusieurs réseaux enzymatiques élaborés au cours de l’évolution relayent l’information générée par ces signaux. Les modules MAP kinases sont extrêmement importants au sein de la cellule. Chez l’humain, 14 MAP kinases sont regroupées en sept voies distinctes intervenant dans le contrôle d’une myriade de processus cellulaires. ERK3/4 sont des homologues de ERK1/2 pour lesquelles on ne connaît que très peu de choses concernant leurs fonctions et régulation. Ces MAP kinases sont dites atypiques puisqu’elles ont des particularités structurales et des modes de régulation qui diffèrent des autres MAP kinases classiques. Ainsi, notre laboratoire a démontré que l’activité de ERK3 est régulée par le système ubiquitine-protéasome et qu’elle pourrait avoir un rôle à jouer dans le contrôle de la différenciation et la prolifération cellulaire. La première étude présentée décrit la régulation de ERK3 au cours du cycle cellulaire. Nous avons observé que ERK3 est hyperphosphorylée et s’accumule spécifiquement au cours de la mitose. Des analyses de spectrométrie de masse ont mené à l’identification de quatre sites de phosphorylation situés à l’extrémité du domaine C-terminal. Nous avons pu démontrer que la kinase mitotique CDK1/cycline B phosphoryle ces sites et que les phosphatases CDC14A et CDC14B les déphosphorylent. Finalement, nous démontrons que la phosphorylation mitotique de ERK3 a pour effet de la stabiliser. Au début de mes études doctorales, la kinase MK5 fut identifiée comme premier partenaire et substrat de ERK3. MK5 a très peu de fonctions connues. Des données dans la littérature suggèrent qu’elle peut moduler le cycle cellulaire dans certaines conditions. Par exemple, MK5 a récemment été identifié comme inducteur de la sénescence induite par l’oncogène Ras. Dans la deuxième étude, nous décrivons une nouvelle fonction de MK5 dans le contrôle du cycle cellulaire. Nous démontrons par des expériences de gain et perte de fonction que MK5 ralentit l’entrée en mitose suite à un arrêt de la réplication. Cette fonction est dépendante de l’activité enzymatique de MK5 qui régule indirectement l’activité de CDK1/cycline B. Finalement, nous avons identifié Cdc25A comme un nouveau substrat in vitro de MK5 dont la surexpression supprime l’effet de MK5 sur l’entrée en mitose. En conclusion, nos résultats décrivent un nouveau mécanisme de régulation de ERK3 au cours de la mitose, ainsi qu’une nouvelle fonction pour MK5 dans le contrôle de l’entrée en mitose en réponse à des stress de la réplication. Ces résultats démontrent pour la première fois l’implication de ces protéines au cours de la transition G2/M. Nos travaux établissent de nouvelles pistes d’études pour mieux comprendre les rôles encore peu définis des kinases ERK3/4-MK5.

Studies on immobilization of Bacteria

Cell immnhilizatinn technology in a rapidly expanding arna in the endeavour of microbial fnrmentatiwn.During the lnmt 15 years anveral prnceafinn have been developed and more are in developmental atage of approaching commercial utilizatinn.In the present programme it was planned to develop an optimized process for the innobilization of alpha amylase producing Bacillus polymyxa (CBTB 25) an isolate obtained from Cochin University campus primarily for the production of alpha-amylase.Optimal concentration of support material that attributaa stability and maximal activity to the immobilized cell beads was determined using different concentrations of sodium aliginate as support and estimation of amylase production.An overeall assessment of the data obtained for the various studies conducted denotes that immobilized cells synthesize alpha-amylase at comparable rates with free cells and produce reducing sugara at a higher level than free cells.Results indicated that both phosphate and citrate buffers could be used for disrupting the immobilized beads since they enforced maximal release of cells through leaching from the beads within one hour.On comparative analysis it was observed that immobilized cells could synthesize alpha amylase at similar levels with free cells of B.polymyxa.On Co-immobilization of B.Polymyxa with S.cerevisiae,the co-immobilizate beads could effeciently convert starch directly to ethanol with a yield of 14.8% at 1 : 2 ratio.

Studies on the interaction of two level atoms with quantized electromagnetic field

The present study described about the interaction of a two level atom and squeezed field with time varying frequency. By applying a sinusoidal variation in the frequency of the field, the randomness in population inversion is reduced and the collapses and periodic revivals are regained. Quantum optics is an emerging field in physics which mainly deals with the interaction of atoms with quantised electromagnetic fields. Jaynes-Cummings Model (JCM) is a key model among them, which describes the interaction between a two level atom and a single mode radiation field. Here the study begins with a brief history of light, atom and their interactions. Also discussed the interaction between atoms and electromagnetic fields. The study suggest a method to manipulate the population inversion due to interaction and control the randomness in it, by applying a time dependence on the frequency of the interacting squeezed field.The change in behaviour of the population inversion due to the presence of a phase factor in the applied frequency variation is explained here.This study also describes the interaction between two level atom and electromagnetic field in nonlinear Kerr medium. It deals with atomic and field state evolution in a coupled cavity system. Our results suggest a new method to control and manipulate the population of states in two level atom radiation interaction,which is very essential for quantum information processing.We have also studied the variation of atomic population inversion with time, when a two level atom interacts with light field, where the light field has a sinusoidal frequency variation with a constant phase. In both coherent field and squeezed field cases, the population inversion variation is completely different from the phase zero frequency modulation case. It is observed that in the presence of a non zero phase φ, the population inversion oscillates sinusoidally.Also the collapses and revivals gradually disappears when φ increases from 0 to π/2. When φ = π/2 the evolution of population inversion is identical to the case when a two level atom interacts with a Fock state. Thus, by applying a phase shifted frequency modulation one can induce sinusoidal oscillations of atomic inversion in linear medium, those normally observed in Kerr medium. We noticed that the entanglement between the atom and field can be controlled by varying the period of the field frequency fluctuations. The system has been solved numerically and the behaviour of it for different initial conditions and different susceptibility values are analysed. It is observed that, for weak cavity coupling the effect of susceptibility is minimal. In cases of strong cavity coupling, susceptibility factor modifies the nature in which the probability oscillates with time. Effect of susceptibility on probability of states is closely related to the initial state of the system.

Synthesis, Characterization and Applications of Modified TiO2 Systems

This thesis is divided in to 9 chapters and deals with the modification of TiO2 for various applications include photocatalysis, thermal reaction, photovoltaics and non-linear optics. Chapter 1 involves a brief introduction of the topic of study. An introduction to the applications of modified titania systems in various fields are discussed concisely. Scope and objectives of the present work are also discussed in this chapter. Chapter 2 explains the strategy adopted for the synthesis of metal, nonmetal co-doped TiO2 systems. Hydrothermal technique was employed for the preparation of the co-doped TiO2 system, where Ti[OCH(CH3)2]4, urea and metal nitrates were used as the sources for TiO2, N and metals respectively. In all the co-doped systems, urea to Ti[OCH(CH3)2]4 was taken in a 1:1 molar ratio and varied the concentration of metals. Five different co-doped catalytic systems and for each catalysts, three versions were prepared by varying the concentration of metals. A brief explanation of physico-chemical techniques used for the characterization of the material was also presented in this chapter. This includes X-ray Diffraction (XRD), Raman Spectroscopy, FTIR analysis, Thermo Gravimetric Analysis, Energy Dispersive X-ray Analysis (EDX), Scanning Electron Microscopy(SEM), UV-Visible Diffuse Reflectance Spectroscopy (UV-Vis DRS), Transmission Electron Microscopy (TEM), BET Surface Area Measurements and X-ray Photoelectron Spectroscopy (XPS). Chapter 3 contains the results and discussion of characterization techniques used for analyzing the prepared systems. Characterization is an inevitable part of materials research. Determination of physico-chemical properties of the prepared materials using suitable characterization techniques is very crucial to find its exact field of application. It is clear from the XRD pattern that photocatalytically active anatase phase dominates in the calcined samples with peaks at 2θ values around 25.4°, 38°, 48.1°, 55.2° and 62.7° corresponding to (101), (004), (200), (211) and (204) crystal planes (JCPDS 21-1272) respectively. But in the case of Pr-N-Ti sample, a new peak was observed at 2θ = 30.8° corresponding to the (121) plane of the polymorph brookite. There are no visible peaks corresponding to dopants, which may be due to their low concentration or it is an indication of the better dispersion of impurities in the TiO2. Crystallite size of the sample was calculated from Scherrer equation byusing full width at half maximum (FWHM) of the (101) peak of the anatase phase. Crystallite size of all the co-doped TiO2 was found to be lower than that of bare TiO2 which indicates that the doping of metal ions having higher ionic radius into the lattice of TiO2 causes some lattice distortion which suppress the growth of TiO2 nanoparticles. The structural identity of the prepared system obtained from XRD pattern is further confirmed by Raman spectra measurements. Anatase has six Raman active modes. Band gap of the co-doped system was calculated using Kubelka-Munk equation and that was found to be lower than pure TiO2. Stability of the prepared systems was understood from thermo gravimetric analysis. FT-IR was performed to understand the functional groups as well as to study the surface changes occurred during modification. EDX was used to determine the impurities present in the system. The EDX spectra of all the co-doped samples show signals directly related to the dopants. Spectra of all the co-doped systems contain O and Ti as the main components with low concentrations of doped elements. Morphologies of the prepared systems were obtained from SEM and TEM analysis. Average particle size of the systems was drawn from histogram data. Electronic structures of the samples were identified perfectly from XPS measurements. Chapter 4 describes the photocatalytic degradation of herbicides Atrazine and Metolachlor using metal, non-metal co-doped titania systems. The percentage of degradation was analyzed by HPLC technique. Parameters such as effect of different catalysts, effect of time, effect of catalysts amount and reusability studies were discussed. Chapter 5 deals with the photo-oxidation of some anthracene derivatives by co-doped catalytic systems. These anthracene derivatives come underthe category of polycyclic aromatic hydrocarbons (PAH). Due to the presence of stable benzene rings, most of the PAH show strong inhibition towards biological degradation and the common methods employed for their removal. According to environmental protection agency, most of the PAH are highly toxic in nature. TiO2 photochemistry has been extensively investigated as a method for the catalytic conversion of such organic compounds, highlighting the potential of thereof in the green chemistry. There are actually two methods for the removal of pollutants from the ecosystem. Complete mineralization is the one way to remove pollutants. Conversion of toxic compounds to another compound having toxicity less than the initial starting compound is the second way. Here in this chapter, we are concentrating on the second aspect. The catalysts used were Gd(1wt%)-N-Ti, Pd(1wt%)-N-Ti and Ag(1wt%)-N-Ti. Here we were very successfully converted all the PAH to anthraquinone, a compound having diverse applications in industrial as well as medical fields. Substitution of 10th position of desired PAH by phenyl ring reduces the feasibility of photo reaction and produced 9-hydroxy 9-phenyl anthrone (9H9PA) as an intermediate species. The products were separated and purified by column chromatography using 70:30 hexane/DCM mixtures as the mobile phase and the resultant products were characterized thoroughly by 1H NMR, IR spectroscopy and GCMS analysis. Chapter 6 elucidates the heterogeneous Suzuki coupling reaction by Cu/Pd bimetallic supported on TiO2. Sol-Gel followed by impregnation method was adopted for the synthesis of Cu/Pd-TiO2. The prepared system was characterized by XRD, TG-DTG, SEM, EDX, BET Surface area and XPS. The product was separated and purified by column chromatography using hexane as the mobile phase. Maximum isolated yield of biphenyl of around72% was obtained in DMF using Cu(2wt%)-Pd(4wt%)-Ti as the catalyst. In this reaction, effective solvent, base and catalyst were found to be DMF, K2CO3 and Cu(2wt%)-Pd(4wt%)-Ti respectively. Chapter 7 gives an idea about the photovoltaic (PV) applications of TiO2 based thin films. Due to energy crisis, the whole world is looking for a new sustainable energy source. Harnessing solar energy is one of the most promising ways to tackle this issue. The present dominant photovoltaic (PV) technologies are based on inorganic materials. But the high material, low power conversion efficiency and manufacturing cost limits its popularization. A lot of research has been conducted towards the development of low-cost PV technologies, of which organic photovoltaic (OPV) devices are one of the promising. Here two TiO2 thin films having different thickness were prepared by spin coating technique. The prepared films were characterized by XRD, AFM and conductivity measurements. The thickness of the films was measured by Stylus Profiler. This chapter mainly concentrated on the fabrication of an inverted hetero junction solar cell using conducting polymer MEH-PPV as photo active layer. Here TiO2 was used as the electron transport layer. Thin films of MEH-PPV were also prepared using spin coating technique. Two fullerene derivatives such as PCBM and ICBA were introduced into the device in order to improve the power conversion efficiency. Effective charge transfer between the conducting polymer and ICBA were understood from fluorescence quenching studies. The fabricated Inverted hetero junction exhibited maximum power conversion efficiency of 0.22% with ICBA as the acceptor molecule. Chapter 8 narrates the third order order nonlinear optical properties of bare and noble metal modified TiO2 thin films. Thin films were fabricatedby spray pyrolysis technique. Sol-Gel derived Ti[OCH(CH3)2]4 in CH3CH2OH/CH3COOH was used as the precursor for TiO2. The precursors used for Au, Ag and Pd were the aqueous solutions of HAuCl4, AgNO3 and Pd(NO3)2 respectively. The prepared films were characterized by XRD, SEM and EDX. The nonlinear optical properties of the prepared materials were investigated by Z-Scan technique comprising of Nd-YAG laser (532 nm,7 ns and10 Hz). The non-linear coefficients were obtained by fitting the experimental Z-Scan plot with the theoretical plots. Nonlinear absorption is a phenomenon defined as a nonlinear change (increase or decrease) in absorption with increasing of intensity. This can be mainly divided into two types: saturable absorption (SA) and reverse saturable absorption (RSA). Depending on the pump intensity and on the absorption cross- section at the excitation wavelength, most molecules show non- linear absorption. With increasing intensity, if the excited states show saturation owing to their long lifetimes, the transmission will show SA characteristics. Here absorption decreases with increase of intensity. If, however, the excited state has strong absorption compared with that of the ground state, the transmission will show RSA characteristics. Here in our work most of the materials show SA behavior and some materials exhibited RSA behavior. Both these properties purely depend on the nature of the materials and alignment of energy states within them. Both these SA and RSA have got immense applications in electronic devices. The important results obtained from various studies are presented in chapter 9.

Les grans infrastructures de transport i el desenvolupament de la ciutat mitjana. El Tren d'Alta Velocitat a les ciutats de Lleida, Avinyó i Novara

L'objectiu central de la tesi és estudiar els processos que permeten aconseguir un desenvolupament local a llarg termini de les ciutats mitjanes a partir de la implantació d'una gran infrastructura com el Tren d'Alta Velocitat (TAV). Es parteix de la hipòtesi que el desenvolupament local urbà a partir del TAV depèn de factors objectius i de factors subjectius (dels subjectes), uns factors que prenen una forma particular en el desenvolupament de les ciutats mitjanes. La tesi es divideix en una primera part teòrica i segona de més aplicada. Diversos autors han arribat a la conclusió que la relació tradicional que s'ha donat entre les infrastructures de transport i territori parteix d'uns paradigmes deterministes, que s'exemplifiquen amb una relació de "causa-efecte". Per aquest motiu, s'han criticat els estudis sobre els efectes socioeconòmics de les infrastructures de transport, així com el mateix concepte d'"efecte". Aquesta crítica es repeteix els estudis sobre el TAV i les ciutats mitjanes, que arriben a la conclusió que el desenvolupament econòmic no és un fet automàtic i que no es poden predir les conseqüències a mig i llarg termini del TAV. El desenvolupament local a partir del TAV, doncs, estaria relacionat amb tres elements principals. En primer lloc, entendre que la ciutat -i el territori- és un fenomen complex i, com a tal, cal abordar-lo des de la teoria dels sistemes complexos. En segon lloc, la gran infrastructura ha de convertir-se en un recurs endogen (interconnexió amb la xarxa local d'actors i territorialització en el milieu de la ciutat) per a que pugui contribuir al desenvolupament. En tercer lloc, la dinàmica de governance dels actors és primordial, i es divideix en la gestió interna de la xarxa local (projecte local) i la gestió multinivell de les administracions. En base als referents teòrics, es construeix una metodologia per avaluar el grau de desenvolupament local que ha comportat el TAV en tres ciutats mitjanes de l'arc mediterrani europeu, Lleida, Avinyó i Novara, situades respectivament a Espanya, França i Itàlia. La metodologia preveu l'estudi d'aspectes tècnics de la ciutat com els de transport (Posició territorial de la ciutat a partir del TAV, Característiques de l'estació TAV), urbanístics (Model urbanístic a escala municipal/urbana, Model urbanístic a escala de l'estació) i econòmics (Diferents projectes econòmics de la ciutat relacionats amb el TAV). També preveu l'estudi d'aspectes organitzatius externs (Els agents supralocals i els seus projectes, Grau de conflictivitat i cooperació en les relacions dels agents locals i supralocals) i interns (Capacitat de creació d'un projecte de ciutat a partir del TAV, Agents que participen en el projecte local i la seva dinàmica, Àmbit territorial dels projectes). Finalment s'efectua una avaluació del procés i dels resultats del desenvolupament local. Com a conclusió es demostra que el procés de desenvolupament local a partir de les grans infrastructures de transport depèn, en bon part, de la capacitat de governance. Depèn, per un cantó, de la capacitat dels agents locals d'elaborar un projecte de desenvolupament i liderar unes estratègies d'aprofitament i, de l'altre, de la capacitat dels agents del territori (estatals, regionals, locals) de crear aliances i cooperació per planificar la infrastructura de transport. Finalment es presenten un seguit de recomanacions a les ciutats que volen planificar l'arribada del TAV per a que contribueixi a un desenvolupament amb les característiques d'eficàcia, sostenibilitat, productivitat i equitat.