953 resultados para development of business operations
Resumo:
This paper develops some theoretical and methodological considerations for the development of a critical competence model (CCM). The model is defined as a set of skills and knowledge functionally organized allowing measurable results with positive consequences for the strategic business objectives. The theoretical approaches of classical model of competences, the contemporary model of competencies and human competencies model were revised for the proposal development. implementation of the model includes 5 steps: 1) conducting a job analysis considering which dimensions or facets are subject to revision, 2) identify people with the opposite performance (the higher performance and lower performance); 3) identify critical incidents most relevant to the job position, 4) develop behavioral expectation scales (bes) and 5) validate BES obtained for experts in the field. As a final consideration, is determined that the competence models require accurate measurement. Approaches considering excessive theoreticism may cause the issue of competence become a fashion business with low or minimal impact, affecting its validity, reliability and deployment in organizations.
Resumo:
The issue of the sustainable development of rural economies in England has recently received considerable attention. This is because many of the poorest areas in the country are rural, often of high environmental quality, but suffering from high unemployment and a lack of services and facilities. The rapid decline in agricultural incomes and in-migration of affluent urban workers since 1990 has exacerbated economic inequality in such areas. A number of factors have the potential to drive rural development and this paper applies, and considers, the feasibility of a method from the USA for combining economic and environmental variables in a regional growth model to examine the hypothesis that environmental quality is an important determinant of sustainable rural development in England. The model output suggests that, although environmental quality does play a role in sustainable rural development in England there are other, more important, factors driving development. These include business and communications infra-structure, the degree and opportunities for commuting and underlying employment prospects. The robustness and limitations of the method for combining economic and environmental variables is discussed in relation to the spatial interrelatedness of Local Authority Districts in England, and conclusions are drawn about areas for refinement and improvement of the method.
Resumo:
Organisations typically define and execute their selected strategy by developing and managing a portfolio of projects. The governance of this portfolio has proved to be a major challenge, particularly for large organisations. Executives and managers face even greater pressures when the nature of the strategic landscape is uncertain. This paper explores approaches for dealing with different levels of certainty in business IT projects and provides a contingent governance framework. Historically business IT projects have relied on a structured sequential approach, also referred to as a waterfall method. There is a distinction between the development stages of a solution and the management stages of a project that delivers the solution although these are often integrated in a business IT systems project. Prior research has demonstrated that the level of certainty varies between development projects. There can be uncertainty on what needs to be developed and also on how this solution should be developed. The move to agile development and management reflects a greater level of uncertainty often on both dimensions and this has led the adoption of more iterative approaches. What has been less well researched is the impact of uncertainty on the governance of the change portfolio and the corresponding implications for business executives. This paper poses this research question and proposes a govemance framework to address these aspects. The governance framework has been reviewed in the context of a major anonymous organisation, FinOrg. Findings are reported in this paper with a focus on the need to apply different approaches. In particular, the governance of uncertain business change is contrasted with the management approach for defined IT projects. Practical outputs from the paper include a consideration of some innovative approaches that can be used by executives. It also investigates the role of the business change portfolio group in evaluating and executing the appropriate level of governance. These results lead to recommendations for executives and also proposed further research.
Resumo:
There is growing concern amongst international lawyers that the United States’ use of unmanned armed vehicles to conduct lethal targeting operations against non-state actors is setting a dangerous precedent for the future and might lead to an erosion of important rules under international law. Taking seriously these concerns, this article examines in more detail the potential precedent created by the US through its lethal drone strikes and the provided justifications, for the purpose of the development of jus ad bellum. In identifying the claims made by the US under different theories of customary international law as qualified practice or expressions of opinio juris that can lead to an alteration of the law should they be accepted by the international community, this article takes a first step towards a more extensive debate on the potential effects of the US drone strikes on the development of international law.
Resumo:
This paper traces the developments of credit risk modeling in the past 10 years. Our work can be divided into two parts: selecting articles and summarizing results. On the one hand, by constructing an ordered logit model on historical Journal of Economic Literature (JEL) codes of articles about credit risk modeling, we sort out articles which are the most related to our topic. The result indicates that the JEL codes have become the standard to classify researches in credit risk modeling. On the other hand, comparing with the classical review Altman and Saunders(1998), we observe some important changes of research methods of credit risk. The main finding is that current focuses on credit risk modeling have moved from static individual-level models to dynamic portfolio models.
Resumo:
The private equity industry was experiencing a phenomenal boom at the turn of the century but collapsed abruptly in 2008 with the onset of the financial crisis. Considered one of the worst crises since the Great Depression of the 1930s, it had sent ripples around the world threatening the collapse of financial institutions and provoking a liquidity crunch followed by a huge downturn in economic activity and recession. Furthermore, the physiognomy of the financial landscape had considerably altered with banks retracting from the lending space, accompanied by a hardening of financial regulation that sought to better contain systemic risk. Given the new set of changes and challenges that had arisen from this period of financial turmoil, private equity found itself having to question current practices and methods of operation in order to adjust to the harsh realities of a new post-apocalyptic world. Consequently, this paper goes on to explore how the private equity business, management and operation model has evolved since the credit crunch with a specific focus on mature markets such as the United States and Europe. More specifically, this paper will aim to gather insights on the development of the industry since the crisis in Western Europe through a case study approach using as a base interviews with professionals working in the industry and those external to the sector but who have/have had considerable interaction with PE players from 2007 to the present.
Resumo:
Includes bibliography
Resumo:
Incluye bibliografía
Resumo:
The use of mobile robots turns out to be interesting in activities where the action of human specialist is difficult or dangerous. Mobile robots are often used for the exploration in areas of difficult access, such as rescue operations and space missions, to avoid human experts exposition to risky situations. Mobile robots are also used in agriculture for planting tasks as well as for keeping the application of pesticides within minimal amounts to mitigate environmental pollution. In this paper we present the development of a system to control the navigation of an autonomous mobile robot through tracks in plantations. Track images are used to control robot direction by preprocessing them to extract image features. Such features are then submitted to a support vector machine in order to find out the most appropriate route. The overall goal of the project to which this work is connected is to develop a real time robot control system to be embedded into a hardware platform. In this paper we report the software implementation of a support vector machine, which so far presented around 93% accuracy in predicting the appropriate route. © 2012 IEEE.
Resumo:
A low-Reynolds-number k-ω model for Newtonian fluids has been developed to predict drag reduction of viscoelastic fluids described by the FENE-P model. The model is an extension to viscoelastic fluids of the model for Newtonian fluids developed by Bredberg et al. (Int J Heat Fluid Flow 23:731-743, 2002). The performance of the model was assessed using results from direct numerical simulations for fully developed turbulent channel flow of FENE-P fluids. It should only be used for drag reductions of up to 50 % (low and intermediate drag reductions), because of the limiting assumption of turbulence isotropy leading to an under-prediction of k, but compares favourably with results from k-ε models in the literature based on turbulence isotropy. © 2012 Springer Science+Business Media Dordrecht.
Resumo:
Factor analysis was used to develop a more detailed description of the human hand to be used in the creation of glove sizes; currently gloves sizes are small, medium, and large. The created glove sizes provide glove designers with the ability to create a glove design that can provide fit to the majority of hand variations in both the male and female populations. The research used the American National Survey (ANSUR) data that was collected in 1988. This data contains eighty-six length, width, height, and circumference measurements of the human hand for one thousand male subjects and thirteen hundred female subjects. Eliminating redundant measurements reduced the data to forty-six essential measurements. Factor analysis grouped the variables to form three factors. The factors were used to generate hand sizes by using percentiles along each factor axis. Two different sizing systems were created. The first system contains 125 sizes for male and female. The second system contains 7 sizes for males and 14 sizes for females. The sizing systems were compared to another hand sizing system that was created using the ANSUR database indicating that the systems created using factor analysis provide better fit.
Resumo:
The increase in aquaculture operations worldwide has provided new opportunities for the transmission of aquatic viruses. The occurrence of viral diseases remains a significant limiting factor in aquaculture production and for the sustainability. The ability to identify quickly the presence/absence of a pathogenic organism in fish would have significant advantages for the aquaculture systems. Several molecular methods have found successful application in fish pathology both for confirmatory diagnosis of overt diseases and for detection of asymptomatic infections. However, a lot of different variants occur among fish host species and virus strains and consequently specific methods need to be developed and optimized for each pathogen and often also for each host species. The first chapter of this PhD thesis presents a complete description of the major viruses that infect fish and provides a relevant information regarding the most common methods and emerging technologies for the molecular diagnosis of viral diseases of fish. The development and application of a real time PCR assay for the detection and quantification of lymphocystivirus was described in the second chapter. It showed to be highly sensitive, specific, reproducible and versatile for the detection and quantitation of lymphocystivirus. The use of this technique can find multiple application such as asymptomatic carrier detection or pathogenesis studies of different LCDV strains. The third chapter, a multiplex RT-PCR (mRT-PCR) assay was developed for the simultaneous detection of viral haemorrhagic septicaemia (VHS), infectious haematopoietic necrosis (IHN), infectious pancreatic necrosis (IPN) and sleeping disease (SD) in a single assay. This method was able to efficiently detect the viral RNA in tissue samples, showing the presence of single infections and co-infections in rainbow trout samples. The mRT-PCR method was revealed to be an accurate and fast method to support traditional diagnostic techniques in the diagnosis of major viral diseases of rainbow trout.
Resumo:
Rural tourism is relatively new product in the process of diversification of the rural economy in Republic of Macedonia. This study used desk research and life story interviews of rural tourism entrepreneurs as qualitative research method to identify prevalent success influential factors. Further quantitative analysis was applied in order to measure the strength of influence of identified success factors. The primary data for the quantitative research was gathered using telephone questionnaire composed of 37 questions with 5-points Likert scale. The data was analyzed using Partial Least Squares Structural Equation Modeling (PLS-SEM) by SmartPLS 3.1.6. Results indicated that human capital, social capital, entrepreneurial personality and external business environment are predominant influential success factors. However, human capital has non-significant direct effect on success (p 0.493) nonetheless the effect was indirect with high level of partial mediation through entrepreneurial personality as mediator (VAF 73%). Personality of the entrepreneur, social capital and business environment have direct positive affect on entrepreneurial success (p 0.001, 0.003 and 0.045 respectably). Personality also mediates the positive effect of social capital on entrepreneurial success (VAF 28%). Opposite to the theory the data showed no interaction between social and human capital on the entrepreneurial success. This research suggests that rural tourism accommodation entrepreneurs could be more successful if there is increased support in development of social capital in form of conservation of cultural heritage and natural attractions. Priority should be finding the form to encourage and support the establishment of formal and informal associations of entrepreneurs in order to improve the conditions for management and marketing of the sector. Special support of family businesses in the early stages of the operation would have a particularly positive impact on the success of rural tourism. Local infrastructure, access to financial instruments, destination marketing and entrepreneurial personality have positive effect on success.
Resumo:
The Bucknell Humanoid Robot Arm project was developed in order toprovide a lightweight robotic arm for the IHMC / Bucknell University bipedal robot that will provide a means of manipulation and facilitate operations in urban environments. The resulting fabricated arm described in this thesis weighs only 13 pounds, and is capable of holding 11 pounds fully outstretched, lifting objects such as tools, and it can open doors. It is also capable of being easily integrated with the IHMC / Bucknell University biped. This thesis provides an introduction to robots themselves, discusses the goals of the Bucknell Humanoid Robot Arm project, provides a background on some of the existing robots, and shows how the Bucknell Humanoid Robot Arm fits in with the studies that have been completed. After reading these studies, important items such as design trees and operational scenarios were completed. The completion of these items led to measurable specifications and later the design requirements and specifications. A significant contribution of this thesis to the robotics discipline involves the design of the actuator itself. The arm uses of individual, lightweight, compactly designed actuators to achieve desired capabilities and performance requirements. Many iterations were completed to get to the final design of each actuator. After completing the actuators, the design of the intermediate links and brackets was finalized. Completion of the design led to the development of a complex controls system which used a combination of Clanguage and Java.