Use of alternative and complementary therapies in labor and delivery care: a cross-sectional study of midwives" training in Catalan hospitals accredited as centers for normal birth

Background: The use of complementary and alternative medicine (CAM) and complementary and alternative therapies (CAT) during pregnancy is increasing. Scientific evidence for CAM and CAT in the field of obstetrics mainly covers pain relief in labor. Midwives are responsible for labor and delivery care: hence, their knowledge of CAM and CAT is important. The aims of this study are to describe the professional profile of midwives who provide care for natural childbirth in Catalan hospitals accredited as centers for normal birth, to assess midwives" level of training in CAT and their use of these therapies, and to identify specific resources for CAT in labor wards. Methods: A descriptive, cross-sectional, quantitative method was used to assess the level of training and use of CAT by midwives working at 28 hospitals in Catalonia, Spain, accredited as public normal birth centers. Results: Just under a third of midwives (30.4%) trained in CAT after completion of basic training. They trained in an average of 5.97 therapies (SD 3.56). The number of CAT in which the midwives were trained correlated negatively with age (r = - 0.284; p < 0.001) and with their time working at the hospital in years (r = - 0.136; p = 0.036). Midwives trained in CAT considered that the following therapies were useful or very useful for pain relief during labor and delivery: relaxation techniques (64.3%), hydrotherapy (84.8%) and the application of compresses to the perineum (75.9%). The availability of resources for providing CAT during normal birth care varied widely from center to center. Conclusions: Age may influence attitudes towards training. It is important to increase the number of midwives trained in CAM for pain relief during childbirth, in order to promote the use of CAT and ensure efficiency and safety. CAT resources at accredited hospitals providing normal childbirth care should also be standardized.

Time to identify cardiac arrest and provide dispatch-assisted cardio-pulmonary resuscitation in a criteria-based dispatch system.

INTRODUCTION: Dispatch-assisted cardiopulmonary resuscitation (DA-CPR) plays a key role in out-of-hospital cardiac arrests. We sought to measure dispatchers' performances in a criteria-based system in recognizing cardiac arrest and delivering DA-CPR. Our secondary purpose was to identify the factors that hampered dispatchers' identification of cardiac arrests, the factors that prevented them from proposing DA-CPR, and the factors that prevented bystanders from performing CPR. METHODS AND RESULTS: We reviewed dispatch recordings for 1254 out-of-hospital cardiac arrests occurring between January 1, 2011 and December 31, 2013. Dispatchers correctly identified cardiac arrests in 71% of the reviewed cases and 84% of the cases in which they were able to assess for patient consciousness and breathing. The median time to recognition of the arrest was 60s. The median time to start chest compression was 220s. CONCLUSIONS: This study demonstrates that performances from a criteria-based dispatch system can be similar to those from a medical-priority dispatch system regarding out-of-hospital cardiac arrest (OHCA) time recognition and DA-CPR delivery. Agonal breathing recognition remains the weakest link in this sensitive task in both systems. It is of prime importance that all dispatch centers tend not only to implement DA-CPR but also to have tools to help them reach this objective, as today it should be mandatory to offer this service to the community. In order to improve benchmarking opportunities, we completed previously proposed performance standards as propositions.

Public and Private Production in a Mixed Delivery System: Regulation, Competition and Costs

Academics and policy makers are increasingly shifting the debate concerning the best form of public service provision beyond the traditional dilemma between pure public and pure private delivery modes, because, among other reasons, there is a growing body of evidence that casts doubt on the existence of systematic cost savings from privatization, while any competition seems to be eroded over time. In this paper we compare the relative merits of public and private delivery within a mixed delivery system. We study the role played by ownership, transaction costs, and competition on local public service delivery within the same jurisdiction. Using a stochastic cost frontier, we analyze the public-private urban bus system in the Barcelona Metropolitan Area. Our results suggest that private firms tendering the service have higher delivery costs than those incurred by the public firm, especially when transaction costs are taken into account. Tenders, therefore, do not help to reduce delivery costs. Our results suggest that under a mixed delivery scheme, which permits the co-existence of public and private production, the metropolitan government and the regulator can use private delivery to contain costs in the public firm and, at the same time, benefit from the greater flexibility of private firms for dealing with events not provided for under contract.

Cesarean section - short term maternal complications related to the mode of delivery

Cesarean section (CS) is the most common major surgery performed on women worldwide. CS can save the life of the mother or the fetus, but is associated with the typical complications of any major surgery: hemorrhage, infection, venous thromboembolism and complications of anesthesia, sometimes leading to maternal death. Recently there have been several reports from well resourced countries on increased severe maternal morbidity and even mortality. Increased rates of CS, obesity and older mothers may explain this rise. The aim of this thesis is to study the rates and risk factors of short term maternal complications associated with CS. Also, we compared maternal morbidity by mode of delivery and over time. The complication rates were assessed in a prospective study involving 2496 CS performed in the 12 largest delivery units in Finland in 2005. The rates of severe complications were studied by mode of delivery in a register-based study comparing national cohorts in 1997 and 2002. The impact of several risk factors on severe maternal morbidity by mode of delivery was studied in a register-based study of all singleton deliveries in 2007-2011. In the prospective study, 27% of the women who underwent CS had one or more intraoperative or postoperative complications during their hospital stay, and 10% had a severe complication. In the register-based study the incidence of life-threatening maternal complications was 7.6 in 1000 deliveries. The incidence was lowest for vaginal delivery (VD), followed by instrumental VD and elective CS, and highest in emergency CS. An attempt of VD, including the risks associated with emergency CS, seems to be the safest mode of delivery, even for most high-risk women.

Liposomes as a gene delivery system

Gene therapy is an active field that has progressed rapidly into clinical trials in a relatively short time. The key to success for any gene therapy strategy is to design a vector able to serve as a safe and efficient gene delivery vehicle. This has encouraged the development of nonviral DNA-mediated gene transfer techniques such as liposomes. Many liposome-based DNA delivery systems have been described, including molecular components for targeting given cell surface receptors or for escaping from the lysosomal compartment. Another recent technology using cationic lipids has been evaluated and has generated substantial interest in this approach to gene transfer.

Poly-DL-lactide-co-glycolide microspheres as a controlled release antigen delivery system

Successful vaccine application means maximum protection with minimal number of administrations. A rational development of vaccines involves studies of the nature of the antigen as well as of the adjuvant to be used to improve the immune responses. This has provided the impetus for studies to design the degradable devices and for different approaches to antigen delivery by different routes of administration. The development of controlled release systems based on polymeric devices that permit a sustained or pulsed release of encapsulated antigens has attracted much interest. Polymeric delivery systems consist of polymers that release their content continuously in a controlled manner over a period of time. The development of a biocompatible delivery system for parenteral administration offers several advantages in terms of immunoadjuvanticity over other compounds. It was found that, in contrast to other carriers, microspheres are more stable, thus permitting administration by the oral or parenteral route. In the present study, we describe the main characteristics and potentialities of this new immunoadjuvant for oral and parenteral administration.

Linking supplier delivery risk to outbound delivery service performance improvement

Customer satisfaction should be the main focus for all of the parts of the business. Usually supply chain behind the business is in a key role when this focus is pursued especially in repair service business. When focusing on the materials that are needed to make repairs to equipment under service contracts, the time aspect of quality is critical. Do late deliveries from supplier have an effect on the service performance of repairs when distribution center of a centralized purchasing unit is acting as a buffer between suppliers and repair service business? And if so, how should the improvement efforts be prioritized? These are the two main questions that this thesis focuses on. Correlation and linear regression was tested between service levels of supplier and distribution center. Percentage of on-time deliveries were compared to outbound delivery service level. It was found that there is statistically significant correlation between inbound and outbound operations success. The other main question of the thesis, improvement prioritization, was answered by creating material availability based supplier classification and additional to that, by developing the decision process for the analysis of most critical suppliers. This was built on a basis of previous supplier and material classification methods.

Application of continuous positive airway pressure in the delivery room: a multicenter randomized clinical trial

This study evaluated whether the use of continuous positive airway pressure (CPAP) in the delivery room alters the need for mechanical ventilation and surfactant during the first 5 days of life and modifies the incidence of respiratory morbidity and mortality during the hospital stay. The study was a multicenter randomized clinical trial conducted in five public university hospitals in Brazil, from June 2008 to December 2009. Participants were 197 infants with birth weight of 1000-1500 g and without major birth defects. They were treated according to the guidelines of the American Academy of Pediatrics (APP). Infants not intubated or extubated less than 15 min after birth were randomized for two treatments, routine or CPAP, and were followed until hospital discharge. The routine (n=99) and CPAP (n=98) infants studied presented no statistically significant differences regarding birth characteristics, complications during the prenatal period, the need for mechanical ventilation during the first 5 days of life (19.2 vs 23.4%, P=0.50), use of surfactant (18.2 vs 17.3% P=0.92), or respiratory morbidity and mortality until discharge. The CPAP group required a greater number of doses of surfactant (1.5 vs 1.0, P=0.02). When CPAP was applied to the routine group, it was installed within a median time of 30 min. We found that CPAP applied less than 15 min after birth was not able to reduce the need for ventilator support and was associated with a higher number of doses of surfactant when compared to CPAP applied as clinically indicated within a median time of 30 min.

Development and characterization of orally-disintegrating films for propolis delivery

This study aimed at evaluating the effect of different concentrations of hydrolyzed collagen (HC) on the properties of an orally disintegrating film containing propolis ethanol extract (PEE) as an active component. The films were evaluated in terms of total phenols, mechanical properties, solubility, contact angle, disintegration time, and microstructure. The films were prepared by casting with 2 g of protein mass (gelatin and HC), 30 g of sorbitol/100 g of protein mass, and 100 g of PEE/100 g of protein mass. HC was incorporated at concentrations of 0, 10, 20, and 30 g/100 g of protein mass. It was found that increased concentrations of HC reduced tensile strength and increased elongation; however, all films showed plastic behavior. An increase in solubility at 25 ºC, a reduction in the contact angle, and disintegration time were also observed. Thus, higher concentrations of collagen led to more hydrophilic and more soluble polymeric matrices that showed shorter dissolution time, favoring the use of these materials as carriers for active compounds to be delivered in the oral cavity.

Breastfeeding preterm infant from the delivery ward via nicu to home

The aim of this study was to examine how to support breastfeeding of preterm infants immediately after birth in the delivery ward, during their hospital stay in a neonatal intensive care unit (NICU), and at home after hospital discharge. Specifically, the role of early physical contact, maternal breastfeeding attitude, and an internet-based peer support group were investigated. The delivery ward practices concerning the implementation of early physical contact between a mother and her infant admitted to a NICU were examined by a structured survey in two hospitals. An Internet-based, breastfeeding peer-support intervention for the mothers of preterm infants was developed and tested in a randomized controlled design with one year follow-up. The main outcomes were the duration of exclusive and overall breastfeeding, expressing milk, and maternal attitude. In addition, the perceptions of mothers of preterm infants were investigated by analyzing the peer-support group discussions with a qualitative approach. The implementation of early physical contact was different between the two hospitals studied and was based more on hospital routines than the physiological condition of the infant. Preterm infants, who were born before a gestational age (GA) of 32 weeks, were hardly ever allowed to have early contact with their mothers. Both, a higher GA and early physical contact predicted earlier initiation and increased frequency of breastfeeding in the NICU. A maternal breastfeeding-favorable attitude predicted increased frequency of breastfeeding in the NICU and also a longer duration of overall breastfeeding. The actual duration of breastfeeding was, however, shorter than the mothers intended in advance. The internet-based, peer-support intervention had no effect on the duration of breastfeeding, expressing milk, or maternal attitude. The participating mothers enjoyed the possibility of sharing their experiences of preterm infants with other mothers in similar situations. Some of the mothers also experienced being given useful advice for breastfeeding. Based on the mothers’ discussions, a process of breastfeeding preterm infants was created. This included some paradoxical elements in the NICU where, for example, breast milk was emphasized over breastfeeding and support in the hospital varied. Hospital discharge was a critical point, when the mothers faced breastfeeding in reality. Over time, the mothers assimilated their breastfeeding experience into part of being a mother. The care practices related to early physical contact in delivery wards need to be re-evaluated to allow more infants to have a moment with the mother. Maternal attitude could be screened prenatally and attitude-focused interventions developed. Breastfeeding support in the NICU should be standardized. Internet-based breastfeeding peer-support intervention was feasible but additional research is needed.

2D, 3D and 4D active compound delivery in tissue engineering and regenerative medicine

Recent advances in tissue engineering and regenerative medicine have shown that controlling cells microenvironment during growth is a key element to the development of successful therapeutic system. To achieve such control, researchers have first proposed the use of polymeric scaffolds that were able to support cellular growth and, to a certain extent, favor cell organization and tissue structure. With nowadays availability of a large pool of stem cell lines, such approach has appeared to be rather limited since it does not offer the fine control of the cell micro-environment in space and time (4D). Therefore, researchers are currently focusing their efforts on developing strategies that include active compound delivery systems in order to add a fourth dimension to the design of 3D scaffolds. This review will focus on recent concepts and applications of 2D and 3D techniques that have been used to control the load and release of active compounds used to promote cell differentiation and proliferation in or out of a scaffold. We will first present recent advances in the design of 2D polymeric scaffolds and the different techniques that have been used to deposit molecular cues and cells in a controlled fashion. We will continue presenting the recent advances made in the design of 3D scaffolds based on hydrogels as well as polymeric fibers and we will finish by presenting some of the research avenues that are still to be explored.

Apatite-Polymer Composite Particles for Controlled Delivery of BMP-2: In Vitro Release and Cellular Response

Bone morphogenetic protein-2 (BMP-2) has the ability to induce osteoblast differentiation of undifferentiated cells, resulting in the healing of skeletal defects when delivered with a suitable carrier. We have applied a versatile delivery platform comprising a novel composite of two biomaterials with proven track records – apatite and poly(lactic-co-glycolic acid) (PLGA) – to the delivery of BMP-2. Sustained release of this growth factor was tuned with variables that affect polymer degradation and/or apatite dissolution, such as polymer molecular weight, polymer composition, apatite loading, and apatite particle size. The effect of released BMP-2 on C3H10T1/2 murine pluripotent mesenchymal cells was assessed by tracking the expression of osteoblastic makers, alkaline phosphatase (ALP) and osteocalcin. Release media collected over 100 days induced elevated ALP activity in C3H10T1/2 cells. The expression of osteocalcin was also upregulated significantly. These results demonstrated the potential of apatite-PLGA composite particles for releasing protein in bioactive form over extended periods of time.

Testing Delivery Systems in Transnational virtual learning: the vocational management training for the european tourism industry (VocMat) case study

This article discusses the lessons learned from developing and delivering the Vocational Management Training for the European Tourism Industry (VocMat) online training programme, which was aimed at providing flexible, online distance learning for the European tourism industry. The programme was designed to address managers ‘need for flexible, senior management level training which they could access at a time and place which fitted in with their working and non-work commitments. The authors present two main approaches to using the Virtual Learning Environment, the feedback from the participants, and the implications of online Technology in extending tourism training opportunities

Fine sediment delivery and transfer in lowland catchments: modelling suspended sediment concentrations in response to hydrological forcing

Fine sediment delivery to and storage in stream channel reaches can disrupt aquatic habitats, impact river hydromorphology, and transfer adsorbed nutrients and pollutants from catchment slopes to the fluvial system. This paper presents a modelling toot for simulating the time-dependent response of the fine sediment system in catchments, using an integrated approach that incorporates both land phase and in-stream processes of sediment generation, storage and transfer. The performance of the model is demonstrated by applying it to simulate in-stream suspended sediment concentrations in two lowland catchments in southern England, the Enborne and the Lambourn, which exhibit contrasting hydrological and sediment responses due to differences in substrate permeability. The sediment model performs well in the Enborne catchment, where direct runoff events are frequent and peak suspended sediment concentrations can exceed 600 mg l(-1). The general trends in the in-stream concentrations in the Lambourn catchment are also reproduced by the model, although the observed concentrations are low (rarely exceeding 50 mg l(-1)) and the background variability in the concentrations is not fully characterized by the model. Direct runoff events are rare in this highly permeable catchment, resulting in a weak coupling between the sediment delivery system and the catchment hydrology. The generic performance of the model is also assessed using a generalized sensitivity analysis based on the parameter bounds identified in the catchment applications. Results indicate that the hydrological parameters contributing to the sediment response include those controlling (1) the partitioning of runoff between surface and soil zone flows and (2) the fractional loss of direct runoff volume prior to channel delivery. The principal sediment processes controlling model behaviour in the simulations are the transport capacity of direct runoff and the in-stream generation, storage and release of the fine sediment fraction. The in-stream processes appear to be important in maintaining the suspended sediment concentrations during low flows in the River Enborne and throughout much of the year in the River Lambourn. Copyright (c) 2007 John Wiley & Sons, Ltd.

Scope and Limitations of The Co-Drug Approach to Topical Drug Delivery

Many currently available drugs show unfavourable physicochemical properties for delivery into or across the skin and temporary chemical modulation of the penetrant is one option to achieve improved delivery properties. Pro-drugs are chemical derivatives of an active drug which is covalently bonded to an inactive pro-moiety in order to overcome pharmaceutical and pharmacokinetic barriers. A pro-drug relies upon conversion within the body to release the parent active drug (and pro-moiety) to elicit its pharmacological effect. The main drawback of this approach is that the pro-moiety is essentially an unwanted ballast which, when released, can lead to adverse effects. The term ‘co-drug’ refers to two or more therapeutic compounds active against the same disease bonded via a covalent chemical linkage and it is this approach which is reviewed for the first time in the current article. For topically applied co-drugs, each moiety is liberated in situ, either chemically or enzymatically, once the stratum corneum barrier has been overcome by the co-drug. Advantages include synergistic modulation of the disease process, enhancement of drug delivery and pharmacokinetic properties and the potential to enhance stability by masking of labile functional groups. The amount of published work on co-drugs is limited but the available data suggest the co-drug concept could provide a significant therapeutic improvement in dermatological diseases. However, the applicability of the co-drug approach is subject to strict limitations pertaining mainly to the availability of compatible moieties and physicochemical properties of the overall molecule.