Milk production during the colostral period is not related to the later lactational performance in dairy cows

In dairy cows, milk yield increases rapidly after parturition until a peak at around wk 6 of lactation. However, the description of the shape of the lactation curve is commonly based on weekly average milk yields. For a more detailed analysis of the milk production curve from the very beginning of lactation including the colostral period and the effect of colostrum yield on further lactational performance, the first 10 milkings after parturition, daily milk yields from d 1 to 28 of lactation, and the cumulative milk production on d 100 to 305 of lactation were investigated in 17 primiparous and 39 multiparous cows milked twice daily. Milk yield at the first milking after parturition (colostrum) ranged from 1.3 to 20.7kg (Δ=19.4kg) in multiparous and from 1.8 to 10.9kg in primiparous animals (Δ=9.1kg). At the tenth milking, milk production ranged from 9.2 to 21.5kg (Δ=12.3kg) in multiparous and from 7.0 to 15.2kg (Δ=8.2kg) in primiparous animals. Immediately after parturition, daily milk production increased rapidly, but after approximately 1wk in lactation, the slope of the daily milk production curve flattened and continued more linear. A nonlinear regression equation was used to determine this timely change, which occurred earlier in primiparous (d 6.9±0.3) than in multiparous cows (d 8.2±0.2). The correlation between the amount of first colostrum and milk production during further lactation decreased already from 0.47 on d 5 to 0.32 on d 14. In multiparous cows, the correlation between total milk production of the previous 305d standard lactation and the amount of first colostrum was not significant (correlation=0.29), whereas the correlation with the daily production increased from 0.45 on d 5 to 0.69 on d 14. However, in primiparous animals, correlations between first-colostrum yield and daily milk yields up to d 28 of lactation were not significant, possibly due to the smaller sample size compared with multiparous animals. First-colostrum yield and cumulative milk production of 100, 200, and 305 lactation days were not significantly correlated in multiparous and primiparous cows. In conclusion, the milk production during the first few milkings is widely independent from the overall production level of a cow. Potentially, genetic selection toward lower milk yield during the very first days after parturition at a simultaneously high lactational performance may be a tool to ensure sufficient colostrum quality and to reduce the metabolic load around parturition.

Dairy science : its principles and practice in production, management and processing /

Includes bibliographical references (p. 658-666).

Preliminary report of the cost of milk production on 79 dairy farms in four areas of Pennsylvania 1938

Mimeographed.

Charts & tables: production and consumption of manufactured dairy products, changes in seasonal variation of butter production, cost of manufacture and distribution of butter and cheese.

Cover title.

Judging dairy cattle on the basis of type and records of production /

"Issued January 1941."

Lameness, metabolic and digestive disorders, and technical efficiency in Danish dairy herds: a stochastic frontier production function approach

The relationship between reported treatments of lameness, metabolic disorders (milk fever, ketosis), digestive disorders, and technical efficiency (TE) was investigated using neutral and non-neutral stochastic frontier analysis (SFA). TE is estimated relative to the stochastic frontier production function for a sample of 574 Danish dairy herds collected in 1997. Contrary to most published results, but in line with the expected negative impact of disorders on the average cow milk production, herds reporting higher frequencies of milk fever are less technically efficient. Unexpectedly, however, the opposite results were observed for lameness, ketosis, and digestive disorders. The non-neutral stochastic frontier indicated that the opposite results are due to the relative. high productivities of inputs. The productivity of the cows is also reflected by the direction of impact of herd management variables. Whereas efficient farms replace cows more frequently, enroll heifers in production at an earlier age, and have shorter calving intervals, they also report higher frequency of disorder treatments. The average estimated energy corrected milk loss per cow is 1036, 451 and 242 kg for low, medium and high efficient farms. The study demonstrates the benefit of the stochastic frontier production function involving the estimation of individual technical efficiencies to evaluate farm performance and investigate the source of inefficiency. (C) 2004 Elsevier B.V. All rights reserved.

Farming Systems: Beyond Production Technologies for Dairy RD&E

The challenge of Research, Development and Extension (R,D&E) is to apply agricultural science to serve the real needs of production systems. The ideal is to have community partnerships involving a variety of stakeholders with equal representation, and a sharing in the design of R, D&E actions. R,D&E policy in Australia is stressing the participation of industry in new projects. The Dairy Research and Development Corporation (DRDC) in Australia, and the Brazilian Agricultural Research Corporation for Dairy (Embrapa Dairy), have developed initiatives to identify priorities for R,D&E design with participation of the industry. However, weaknesses in the methods have been identified. The present study describes the results of a strategy to involve a broader range of stakeholders in the identification of regional dairy industry needs. The findings show that overall communication, finance and marketing as the three major priorities of three study regions, meaning that primary needs for the industry are not in production technologies. This is an apparent contradiction with what some stakeholders considered valuable for dairy farms, which are pasture, genetics and nutrition technologies. The results reflect the large amount of research activity into production technology, and the relative success of R,D&E. However, it is necessary to consider issues beyond production technologies before developing R,D&E projects or presenting technologies.

Dairy cattle-slurry treatment technologies: towards an integrating approach of crop production, animal feeding and environmental impacts

Dairy cattle farms have a well-known environmental impact that affects all ecological compartments: air, soil, water and biosphere [1]. Dairy cattle farming are a significant source of anthropogenic gases from enteric fermentation, manure storage and land application, mainly ammonia (NH3), nitric oxide (NO), nitrous oxide (N2O), carbon dioxide (CO2) and methane (CH4). The emission of such gases represents not only an environmental problem but also leads to energy and nitrogen (N) losses in ruminant production systems [2-5]. Several efforts are required on the development of new technologies and strategies that mitigate gaseous emissions, N losses and improve the efficiency of the energy and N cycles [6, 7]. In the Northwest of Portugal, dairy cattle production has a major impact on the economy, with strong repercussions at national scale. Therefore, our Ph.D. thesis project aims to: a) Study natural supplements as additives in the dairy cattle diet towards a decrease in GHG emissions from feeding operations; b) Compare commercial dairy cattle diets with and without additives on gaseous emissions from manure deposited in a simulated concrete floor; c) Assess the concentrations and emissions of NH3 and greenhouse gases from commercial dairy cattle facilities; d) Evaluate the effects of different additives on lowering gaseous emissions from dairy cattle excreta, using a laboratory system simulating a dairy house concrete floor.

Production Diseases in European Organic Dairy Farms – Current Status and Identification of Drivers for Improvement by Means of a Systemic Approach

The aims of this thesis were to determine the animal health status in organic dairy farms in Europe and to identify drivers for improving the current situation by means of a systemic approach. Prevalences of production diseases were determined in 192 herds in Germany, France, Spain, and Sweden (Paper I), and stakeholder consultations were performed to investigate potential drivers to improve animal health on the sector level (ibid.). Interactions between farm variables were assessed through impact analysis and evaluated to identify general system behaviour and classify components according to their outgoing and incoming impacts (Paper II-III). The mean values and variances of prevalences indicate that the common rules of organic dairy farming in Europe do not result in consistently low levels of production diseases. Stakeholders deemed it necessary to improve the current status and were generally in favour of establishing thresholds for the prevalence of production diseases in organic dairy herds as well as taking actions to improve farms below that threshold. In order to close the gap between the organic principle of health and the organic farming practice, there is the need to formulate a common objective of good animal health and to install instruments to ensure and prove that the aim is followed by all dairy farmers in Europe who sell their products under the organic label. Regular monitoring and evaluation of herd health performance based on reference values are considered preconditions for identifying farms not reaching the target and thus in need of improvement. Graph-based impact analysis was shown to be a suitable method for modeling and evaluating the manifold interactions between farm factors and for identifying the most influential components on the farm level taking into account direct and indirect impacts as well as impact strengths. Variables likely to affect the system as a whole, and the prevalence of production diseases in particular, varied largely between farms despite some general tendencies. This finding reflects the diversity of farm systems and underlines the importance of applying systemic approaches in health management. Reducing the complexity of farm systems and indicating farm-specific drivers, i.e. areas in a farm, where changes will have a large impact, the presented approach has the potential to complement and enrich current advisory practice and to support farmers’ decision-making in terms of animal health.

Productive performance and milk protein fraction composition of dairy cows supplemented with sodium monensin

The objective of this work was to evaluate the levels of sodium monensin on lactating cows and their effects on productive performance and milk protein fraction composition. It was used 12 Holstein cows, distributed in four balanced 3 × 3 Latin squares, and fed three diets: one control without monensin, and two diets with monensin at the levels of 24 or 48 mg/kg DM added to the concentrate. Milk production was daily measured throughout the entire experimental period. The samples used for analysis of milk composition were collected on two alternated days from the two daily milking. Non-protein nitrogen, total nitrogen and non-casein nitrogen contents were directly evaluated in the milk, and casein, whey protein and true protein contents were indirectly determined. The use of monensin in the rations reduced dry matter and nutrient intake, especially when diet with 48 mg/kg of dry matter was given. The ration with 24 mg/kg of DM increased milk production, with or without correction, and also fat and lactose yield, and it improved productive efficiency. The levels of monensin in the ratios did not influence contents of milk crude protein, non-protein nitrogen, non-casein nitrogen, true protein, casein, casein/true protein ratio, whey protein, and of all those fractions expressed as percentage of crude protein. The utilization of monensin in the ratio at the dose of 24 mg/kg of DM influences positively the productive performance of lactating cows, and it does not influence the composition of milk protein fractions.